Mac Disk Manager Pro 2009 does not start
I have Mac Pro 4.1 2.93 Quad-cord. I look on the net for a solution to the question I had, without success. I recently updated my graphics card to an NVIDIA GTX 960. I connected through HDMI on my monitor. Now, with my old factory graphic card I could just hold the option key to bring up start between 10.11.3 OS and Windows 10 disk management. Now (with the new graphics card), when I take the key Option, it monitor does not turn. But I hear my Mac Pro work. If I let him start normally, without anything hold the monitor will stay a 'sleep' mode until load OSX.
Could I get some ideas what could be the problem?
Of course, it looks like you have a PC (not not flashed with Apple EFI).
A card flashed not Apple will not display anything until loading drivers that is right in front of the login screen.
This means that you can not use special startups as Option (Boot Manager) or recovery.
Tags: Mac
Similar Questions
-
Apple MacBook Pro 2012 does not start
2012 Apple MacBook Pro. Does not start. Just get the folder with the question mark. gives possibility to restart with the ERD, but the model doesn't have a hard drive.
Help the college student needs to access files on the hard drive for the finals.
Thank you
What happens when you start to recovery
OS X: on OS X Recovery - Apple Support
and repair/disk startup disk via disk utility which is located in the recovery of aid?
If it is repairable so reinstall OS x, as the article says
Also here is covered:
On the screens, you see when you start your Mac - Apple Support
This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.
-
Adobe Acrobat pro 2015 does not start
Hello
I installed Adobe Acrobat pro 2015
on W2008R2 SP1 Terminalserver. Then, after that, I can't start the acrobat.exe. The Adobe software
Application Manager warns that it does not work. I would be happy, if you can
Help.APPCRASH
Anwendungsname: PDApp.exe
Anwendungsversion: 9.0.0.24
Anwendungszeitstempel: 54d1cf91
Fehlermodulname: KERNELBASE.dll
Fehlermodulversion: 6.1.7601.19160
Fehlermodulzeitstempel: 56bcd5c3
Ausnahmecode: 40010006
Ausnahmeoffset: 0000c52f
Betriebsystemversion: 6.1.7601.2.1.0.16.7
Gebietsschema-ID: 1031
Zusatzinformation 1: c905
Zusatzinformation 2: c905acd73fb492d62b693d29db51a461
Zusatzinformation 3: eca1
Zusatzinformation 4: eca1f0a4ce51a846384e3bcbbb2e4895
Best regards
Armindirk
Hi Anurag,
Thank you for asking. Attached files for the solution of the problem.
Best regards
armindirk
Von: Anurag_Gupta
Gesendet: Mittwoch, 19. May 2016 13:22
Year: Herr Schwatlo
Vacancies: Adobe Acrobat pro 2015 does not start
Adobe Acrobat pro 2015 does not start
created by Anurag_Guptahttps://forums.adobe.com/people/Anurag_Gupta> installation, updated, sign up for Acrobat - & discovers the discussion fullhttps://forums.adobe.com/message/8759659#8759659>
-
Why Satellite Pro A300 does not start when you press the power button?
Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.
In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.What should I do to get a normal departure procedure?
When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.
When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
The same thing happen on my Satellite A300. -
Two disks hard two Vista does not start
Two disks hard two Vista does not start
For large computing needs, I combined two software Vista, two memoirs, two hard drives, the work display card and sound card. A hard disk as Primary Master IDE has perfectly my current programs, Office 2007, data and functions. The SATA drive has the space of files I need and a disabled Vista. The computer starts with the SATA HD Vista does not work and stops at a missing file. I do F12 and select the hard disk IDE startup. I tried several solutions, for example: Startup Repair, recovery disk, installation DVD of Vista, repair, BIOS F2 re boot choice and sequence, does not list the IDE drive as a choice, tried to remove the disabled Vista, all the solutions in the forum, Ms. Not solved.
For months in the auto-update feature, the two .NET Framework 1.1 and 3.5 will not install.
Please tell me solutions to correct these errors for .NET and start-up.
http://support.Microsoft.com/default.aspx/KB/326246
'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/kb/314060
Your CD or DVD drive is missing or is not recognized by Windows or other programs
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD
Burn a CD or DVD
If your computer is equipped with a CD or DVD burner, you can copy files to a recordable disc. This process is called burning a disc. By default, Windows Burns discs in the active file system format, but you can also choose to burn discs in ISO image format.
See you soon.
Mick Murphy - Microsoft partner
-
Acrobat Pro XI does not start!
Acrobat Pro XI does not start when I double click on it.
When I check the process in windows tab, it is not yet here.
This question is about my two PC, with Windows 8 installed.
I tried to fix it via Control Panel and no luck.
Any help, suggestions or corrections would be appreciated!
Thanks in advance!
Bill@VT, I tried to open Acrobat from the desktop and the subway without success.
After some "trial and error", I understood the problem.
I uninstalled Acrobat and installed again and it worked fine. Then I went to update to Acrobat, and that's where the problem happens again - I was unable to open Acrobat.
So, I uninstalled again installed back and disabled the update (no updates). Now my problems are solved. I guess the previous update is may be damaged, and that's what creates the problem - that prevent me to open Acrobat. I hope that Adobe solves this problem, as I want to update Acrobat in the future.
To disable the update: open Acrobat, click editing, and then Preferences, scroll to the Updater and disable the updates.
-
After failing to find the source of reliable performance from my PC, I decided to bite the bullet and replace the motherboard, memory and the CPU. I installed a triple base 435 Athlon and a motherboard Gigabyte MA74GMT. Awarded PC again started the first time - but Windows will not, I get a number of options but none work - safe mode brings up several lines of messages on the partition of multi (0) disk (0) rdisk (0).
A previous post suggested that a similar message meant some kind of malware but if I replace the old motherboard, processor and memory Windows works very well - in fact I use it now.
Do I have an option but to reinstall Windows from a CD? Otherwise I have a problem - I can't find the installation discs for each piece of software except my Windows XP Pro! I do repair discs?
Thanks for your help.
Hi DaGeLi,
· Provide us with the complete message you receive.
Follow the methods below:
Method 1:
You were able to start the first time, you can try to boot to the last known good configuration and check the results. Link to get the procedure please refer to: how to start your computer by using last good known Windows XP Configuration:http://support.microsoft.com/kb/307852
Method 2:
If it doesn't then you can follow the procedure from the below mentioned link. As you do not have the Windows XP CD you can follow the procedure if you have already installed on the computer to recovery console
How do I recover from a corrupted registry that prevents Windows XP startup:http://support.microsoft.com/kb/307545
Otherwise, you may need to make the boot floppies. See the link for the procedure below:
http://support.Microsoft.com/kb/310994
You can also contact the manufacturer of the system to get the Windows XP CD.
For reference: how to fix a computer that does not start:http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx#2
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think
-
Creation of recovery disks when Windows 7 does not start
My sister's hard drive is in imminent failure on HP G60-535DX laptop. Windows 7 does not start. I need to make recovery disks. I was able to save info goes into System Recovery Manager, but I don't see an option to create recovery disks to install the system on a replacement hard drive. Is it possible to create diskettes or order?
Thank you
Nanila51
Hello
You can order a set of replacement recovery disks using the link below.
http://support.HP.com/us-en/document/c00810334
If you have a problem with this link, order them directly from HP.
If you live in the United States, contact HP here.
If you are in another part of the world, begin here.
Kind regards
DP - K
-
Update Mac OS, now VMWare Fusion does not start
I upgraded to Mac OS 10.4.11 on Intel MacBook Pro and now VMWare Fusion does not start. I've since installed, uninstalled, and reinstalled to Fusion 2.0.2. That did not help
I have attached the logs from VMWare. Any suggestions?
John
Hi John,.
I checked your logs - thank you for them! That you use in an accident in one of the Apple libraries (OpenSSL, to be precise), which uses VMware Fusion.
I see a number of Mac OS X 10.4.11 users complain about the accident even in iTunes:
http://discussions.Apple.com/thread.jspa?MessageID=8254606
http://forums.Macworld.com/thread/105826
They claim that the installation of the latest Apple security updates (they specifically mention 2008-007) solves the problem.
Can you try to install the latest security updates, and let us know if this fixes the bug Apple?
Thank you!
Ben
-
Satellite Pro A120 - does not start with 4 GB of memory
Hi all
I'm new here so please be gentle!
I have a Satellite Pro A120, model No. PSACOE - 037014EN and you want to increase the memory 512 MB present. I tried 2 different sets of memory 4 GB (2x2gb), but the machine does not start. I tried the different modules together and on their own but still no joy.
Where I'm going wrong? This model will not take 2 GB memory modules?
Any advice will be appreciated.
Best regards
Dr. Feelgood
Hello
Before changing something about your hardware, please make sure that if the computer supports the new pieces of material and, therefore, you can also consult the user manual.
Anyway, I checked this and this laptop can only be upgraded to 2 GB maximum. This means that you can use the module of 1 GB in each slot and * no * 2 GB in each slot.
So please bring back the memory modules and buy 2x1GB. It will work.
-
Satellite Pro L50 does not start with 8 GB
I have a brand new L50 Pro of Satellite (PSKK3A-001001)
Config of RAM is default of 1 x 4 GB memory DDR3 12800 1 use slot 1 slot free
I removed 4GB and install 1 DDR3L 12800 8 GB but it does not start.
The form of State capacity 16 GB so with 2 slots logically, that means 2 x 8 GB cards.
He also said DDRL, which I assume is the correct type.The 4 GB mark was Hynix and the 8 GB is Apacer.
Anyone have a resolution on this or know what the problem is?On this forum you can find many threads where people describe similar problems. In most cases the problem is compatibility modules, especially if Ram needs to be upgraded with modules produced by different manufacturers.
According to the specifications of the laptop you need DDR3L memory (1600 Mhz).
Talk with your dealer and ask if there's Kingston compatibility module. Kingston offers high quality and 100% compatible memory modules. -
Satellite Pro L20 does not start
I have a new satellite pro L20 M750
does not start
the thing is since the first time I tried to start it it would not start.
I bought it over the internet and is still brand new in the plastic bag, would there be anything to make this power for the first time or it is defective.Thanks in advance
Hello
Did you check if the AC adapter is working properly?
Initially, the battery is not charged. You must connect the power adapter to recharge the battery. -
Satellite Pro M10 does not start
My M10 Pro Sat will not start.
Power cable shows a green light and a light orange constant and nothing else, but does nothing when the network is not pluged.Any suggestions? With our thanks.
I put t know if this will help you, but what you could do is the following:
-Unplug the power adapter, remove the battery and wait about 30 min
-then reconnect the two parts and check to see if you can power the laptopIt helped me in the past and maybe it will help you too.
Otherwise:(bien, puis vous devrez contacter le technicien de l'ASP pour la vérification de l'ordinateur portable)Welcome and good luck
-
Satellite Pro L300 - does not start form DVD
Problem: my Satellite Pro L300 will not start no optical drive (DVD)
Leisure problem scenario:
Insert the DVD Toshiba recovery in optical disc drive,
Restart and during the boot prompt, press F12 and select the optical drive.
Black screen and the cursor flashes in the upper left corner... after the seconds flew L300 starts to beep loudly. No message on the screen.Reports of BIOS version 1.50 while the latest version of the BIOS update on the web is to 1.40...
Model No.: PSLB1E-02200GG3
Serial 78685377QI'm doing this because I want to change the OS from Vista to XP.
Hello
Stand by. You mean you are using a Toshiba original WXP for Satellite Pro L300 recovery CD/DVD or what?
Have you tested with any other CD bootable (Linux)?
-
Satellite Pro 460 does not start with the new drive in
I recently received a Satellite Pro 460, but he had no hard drive.
It starts great without a disc in but as soon as I put a new hard drive in it does not start.I thought that it might be again a hard drive, so I pulled out my old Toshiba Satellite with my old drive to work, and yet, it does not start.
Someone has any ideas why this is and what I can do about it
I think that you can not do much. Satellite pro 460 CDT, for example, comes with 2 GB of HARD drive. If you try to get it work with similar HDD without success, it may be defective IDE port on the motherboard.
What HARD drive you are trying to use on this good old classic?
Maybe you are looking for
-
12.4.1.6 cannot create a new version of iTunes
with the new itunes 12.4.1.6 I have been unable "to create a new version for ipad or iphone.
-
Tecra S11 - what are the two primary partitions for?
Hello everyone I just got myself a new Tecra S11 with Win7 64 and there is one thing that has me littlebit wondered.In total, there are four partitions, there are for sure the recovery a (1.46 GB) and the system a (256,38 GB), but then there are also
-
How to enter the menu of the BIOS of the Qosmio G30
How to enter my BIOS (Qosmio G30) esc? F2? F1? Thank you... Derk (Janie)
-
, SO original com RECOVERY MANAGER.
DIZ aeeeiiii galera! So, EU tenho um notebook HP PAVILION dv4-1117nr. E, sem a minima that era nocao informatica, rasguei 'SEVEN' um no bicho, apagando SO original fabrica o (o VISTA). Agora to sendo pressionado pela MICROSOFT para ativr o produto, t
-
Remove (without the appellants) project dependency
The Labview project is not allowing me to remove a dependency file (driver instruments) who has no callers, even if I have relinked all my files from project in the instr.lib folder. I have a dependency file something like "Agilent MXA series...". "l