Mac Mail did not request a new password after changing the outside

Similar Questions

• Mail does not ask for new password after change

  I had to change the password for my email account based on Yahoo (sbcglobal dot) net because the hack/spam. It's the second time in 6 months, and I'm having the same problem that took place the last time. After changing the password through webmail interface for the account and which confirms that change has gone through by a disconnection and return again on webmail with the new password, I estimated that the Mail on my MacBook Air (OSX 10.11.4) app so the Mail on my 5 c iPhone iOS app are still happier never to communicate with Yahoo Server , sending and receiving mail, despite never forces me to put the new password.

  This is obviously less annoying than the problem where Mail asks password constantly, it should not all too obviously work in this way. If one of these devices were lost or stolen, I know now that I could not get this email account by changing the password. Apple support tell me that deleting and then reinstalling the account in Mail should solve this problem, but *? I won't be able to do if a device is never lost/stolen. Something is clearly abnormal in the way Mail communicates with this Yahoo Server and Apple needs to fix this on their end!

  OK, I'm a monumental fool, apparently, but so are at least half a dozen Apple Support "geniuses."

  I have iCloud active keychain. Therefore, this behavior is expected. Keychain passes the new password information to both the MacBook and the iPhone instantly after that I changed it on the MacBook via the webmail interface. No Mail app should ask for the password, because they already have through keychain.

  So I feel very stupid, but then again I am not a geek, and I'm not paid to know these things. What is their excuse? Why zero agents Support of Apple knew it was happening, or think to ask about it? Why was their first step to remove, then reconnect the account, which took me less than an hour from the last time I did, apparently unnecessarily? Honestly, one wonders if anyone knows how to do their job more.

  / end of rant

• Windows 7 fail to recognize new password after that the user changes

  Hi, I have this weird problem, until now happening in Windows 7 machines in a domain Active Directory.

  A user who changes his password at any time before the expiration of the password and the message indicating that the change has succeeded appears as usual. However, after the closure of the current session, disconnection and/or same as restarting the computer where the user has changed the password, he or she is unable to connect with the new password, the computer will only accept the old password. Things don't stop there, if the same user tries to log on to another computer (where he worked before), he rejects the new password with the message "user or incorrect password" as well, but again only accepting the last password used in this second computer.

  A friend at work discovered (by pure chance) that run a MalwareBytes (hereinafter MB) scan and remove all detected items eliminate the problem, not immediately, but after a computer restart. I did the same thing with another user but took my time to browse the list of detection MB and I found that all detected items were related to domain policies legitimate registry keys.

  Things already checked:

  -Normal network connectivity.

  -Not all computers are affected.

  -All affected computers are running Windows 7 Pro x 64.

  -Users who have never used the affected computers can connect without a problem.

  -Users who are unable to connect the affected computers can connect to other computers, they have ever used without problem.

  -Computers have been restarted before using MB, but the problem persists.

  -Checked the names of registry keys, but could not find one related to the connection of the user.

  So my questions are, why this computers only validate against the local SAM? What other things can check to validate what happens?

  Thank you.

  Julio D.

  Hi Julio,.

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  I suggest you to send your request in the TechNet forums to get the problem resolved.

  Please visit the link below to send your query in the TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• BlackBerry smartphones can not send but can receive after changing the password for AOL

  Need to change password on AOL.  Able to receive emails, but cannot send!  Can send other accounts of e-mail on the BB.  No BES

  Thanks for the suggestions.  In the meantime, I actually did all those who, believe it or not.  Things seem to be resolved, but will keep these instructions in case of future problems.

• laptop will not stop mode hibernation even after changing the system power settings.

  Hello

  I hope someone can help! I have a friend who is Dell laptop (Inspiron 1720 using Vista, I think than sp2) just started his laptop goes into hibernation mode randomly. He has never encouraged or warned against this hibernation. He has apparently hit the power button to sleep after his party in hiber. mode and press power to turn, but it will still in hibernation mode again and again. He disappeared into his system settings and turned everything forever or off, hes checked it several times and still, it still goes into hibernation mode. It's a little frustrating for him because he cannot yet ask for help, so why I'm here asking for help on his behalf. Its battery is apparently dead and does not have a load more but he has been dead for some time. He tried to run the laptop with the battery but nothing does not change or resolve the issue. can anyone help or suggest? Reformat im thinking is the only option, but he will lose a lot of information without being able to get all of his stuff backed up before his pc will again into hibernation mode

  My suggestions:

  1 turn off the hibernation option. Procedures are very easy... Here is the link:http://www.internetfixes.com/vista_tips/IF01166.htm

  2. to avoid that the computer will "sleep mode" instead:
  Back to the Power Options window > click on change Plan settings > click Exchange Advanced Ppwer settings > scroll multimedia settings, expand it (lick the sign more) > expand when media sharing > plugged in, set it as to prevent idling to sleep > click OK

  

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Problem with the files not showing (after changing the USB mode)

  I have a sansa fuze 4 GB. version V02.01.09A. OS: Vista Service Pack 1. My rocket was working fine until about a week ago, when it stopped charging. but after installing the new norton 360 sansa is more appeared in my computer or Windows media player at all. I tried updating the driver but it says that the pilot was already up to date. I tried other USB ports again (front and rear), did not work. I decided to change the USB mode and it has finally started to load again in MSC mode.

  now, for the problem I currently have and, when I click on sansa via my computer and go to the music folder, it says "this folder is empty". I unplugged and watched in my music list, and all the music is there. I tried to put a new song on the player, disconnected, and when looking through the songs of the player the new song is here. I reconnected it, the new song is in the music folder, but the other songs are not listed. In addition, I have a microSD card that is listed as "o" in the car, all the songs I had on this appear, but not those on memory internal to the sansa.

  How can I get again list all music files in the folder?

  Note: I do not sync as it has only some of the songs I want on my sansa. the way I add songs is to copy and paste to the folder of the sansa player

  Okay, I don't know why or how, but it works now in MTP mode. I saw you are solutions, but I decided I'll just change the mode before trying to have ideas. until I reconnected it I also removed the microSD card, and it worked perfectly (make a backup of my songs). the problem could have the sd card in all this time?

• I recently changed my username and password for Apple... my iCloud did not recognize my new ID! How do I change icloud?

  I recently changed mu user ID and password for my mobile phone to Apple 6... now my iPad did not recognize my new ID... nor has my new ID recognized iCloud!

  can anyone help?

  Ismah42 wrote:

  I recently changed mu user ID and password for my mobile phone to Apple 6... now my iPad did not recognize my new ID... nor has my new ID recognized iCloud!

  can anyone help?

  and you have already entered in iTunes/app store and setting to icloud and made the changes too?

• why Apple does not accept my new password?

  Why Apple will not accept a new password I create?

  Would appreciate advice.

  Writing an effective question of communities of Apple Support

• I'm trying to set up the new account on 2nd used computer, Outlook Express does not accept my new password.

  trying to set up the new account on 2nd used computer, oe does not accept my new password.

  If this account POP3? If you try to set up the same account on a second machine, all settings including the password must be the same.

• Windows mail did not start because MSOR. DLL could not be initialized

  After a number of updates have been installed, by computer could not restart automatically. When he did re - start, windows mail: could not be started.initialize junk filtering. Your computer may be in memory or the disk is full (0 x 80070002).

  When I press OK, I get: windows mail did not start because MSOR. DLL could not be initialized

  Hello

  What is MSOR. DLL or file MSOE. DLL?

  Perform the steps mentioned below and see if the problem resolves.
  a: Close Windows Mail.
  b: click on Start -run - type regedit and click OK
  c: Navigate to this key
  HKEY_CURRENT_USER-Software-Microsoft-Windows Mail
  d: right-click on that key / export / save under / where you want (with a. Reg)

  e: return this button again.
  f: Position yourself above and then do a right click and delete
  g: Close the registry editor
  h: restart the computer

  Registry warning.
  Important : this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  Hope that helps

• recently bought for LR 4.  He did not accept my new camera Panasonic DMC FZ 200.  So is she doing now?

  recently bought for LR 4.  He did not accept my new camera Panasonic DMC FZ 200.  So is she doing now?

  Please see:

  FAQ: Lightroom will work with my camera, or why does not open my raw files?

• new password back to the old password by itself?

  Windows Vista Home Premium 64-bit... I changed my administrator password and it will work very well for a few hours a day, then, I'll try and log and the new password does not work, but the old one will!  BY ITSELF?

  Hello

  For better assistance, please stay in your original thread:
  new password back to the old password by itself?

  Thank you! Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop Experience & security - since 2003. ~ ~ ~ My MVP profile: https://mvp.support.microsoft.com/profile/Vincenzo

• Dual Boot with windows XP Pro with 2 HARD drive, error on secondary windows install: "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check boot path and disk hardware... »

  Hi, I recently bought a new Hitachi 1 TB internal hard drive. I wanted to do a clean install on the new drive (d), be able to dual boot my computer and leave my old 300 GB disk (C :) as the primary windows installation. After physically installing the new HARD drive, I noticed that "new hardware found" and the the brand name flashed in the bottom right corner. I thought I'd see the new hard drive in my computer, but I did not. I initialized the new HARD drive with the computer management window (right click on my computer - manage) and I also formatted in NTFS (I had to change my printer hard drive letter to assign the new HARD drive with the letter D, but I've made other changes after this step). Now, I could see and use in my main windows on the C: installation. I then installed a windows new copy XP pro with the installation CD I got for my C: but on the D: (Note: I have a Dell computer (and the Dell reinstallation CD) and my current version of windows has SP3 while the installation CD is only SP2) (I also reformatted my HARD drive during the installation of windows to NTFS)

  Now when I try to start on installing the new on my D: I get "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check startup disk and hardware access path. "and another line saying to refer to manuals HARD drive and windows.

  My Boot.ini file at this time was:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I looked towards the top of this help page, but for now I'm unlucky:

  http://support.Microsoft.com/kb/314477

  (The next steps I took by throwing from the Windows CD and go into the repair console)

  I tried to use the bootcfg /rebuild but the line to boot.ini for my secondary HARD drive still does not work.

  He gave me something like:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (1) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I also tried to change the signature() to multi (0), but it did not work. (or try almost all possible permutations of disk() and rdisk() partition() 0 to 2).

  I also tried to use expand F(dvd-drive):\i386\ntkrnlmp(I_have_a_duo-core).ex_ D:\windows\system32\ntoskrnl.exe and a few other combinations, but I when I login as D:\windows simply, it fails to extend with a message like "could not develop" or C:\windows I get "restricted access".

  I have not yet tried CHKDSK/r, but since I did a clean install on a newly formatted drive... I don't think it would work.

  I've also marked the partition on the D: as active (in computer management), but it did not help me.

  I've done a first installation of windows repair, strangely, I couldn't fix this one... Still does not work...

  My default windows installation yet works very well & I see that windows has been installed on the D: but I'm ideas from how to operate the dual-boot, can someone throw me a BONE on what to do?

  Maybe try to do something with the Boot Manager (whatever it is?) Create a new partition and use it as a boot manager? I don't really want to do this, because if I made a mistake I will be unable to use my computer and dual boot should work without going through all this trouble... But I found this page: http://technet.microsoft.com/fr-fr/library/ee829686%28WS.10%29.aspx

  Could a clean install two HDD help? I hope I won't have to do...

  Someone has an idea?

  PS: I'm not such an advanced user so I need a solution step by step, thanks!

  Edit: I also noted that I can't see my new HARD drive in my BIOS... weird... SATA-0 is my old drive HARD 1 and 2 are my dvd 3-5 readers are 'off' and it doesn't seem to be anything that it is plugged in. I also have 4 bays for internal HARD disks. Now, 2 are busy.

  Edit2: I looked inside my case and enabled the good Sata in the Bios after a reboot it detected the drive correctly. Dual boot doesn't always work well... The fact that it was disable in the BIOS while I was installing the new HARD drive could change anything? Hmm...

  In case I wasn't clear enough: I had a windows XP Pro installed on my C:, bought a new hard drive and installed the same copy of windows on it (d). I think that should allow me to double boot between the two installs different. Even if for some reason I can't boot from one on my D:. Andrew, I do not understand why you so far physically disconnect the other drive, the point of the whole operation is to build a boot.ini file so that the BIOS knows that it y facilities 2 windows and you allow to choose (and not have conflicting problems between the 2 systems), someone correct me if I'm wrong? "Expand" the part of my first post made reference to one of the solutions provided by Microsoft in the first link that I have included in my previous post (but I can't seem to work).

  In addition, it is the procedure that I followed: http://www.ehow.com/how_5950826_boot-two-different-hard-drives.html

  (except I've had the first installation already done).

  Andrew "also, once a new hd is plugged on the pc & running, most of the BIOS will place (them) as 1st priority hd, set the BIOS to do this", you mean that by installing separately from windows on each unit when the other is not plugged in, I could choose what disk to start from defining their priority in the BIOS once they are all plugged back? It's too tedious (as I intend to move frequently between the 2 installs) and requires a computer to other users of the lack of computer knowledge. Unfortunately, it is not a viable option.

  EDIT: I DID IT! Hmmm... Well, I double checked in the recovery console, the path of the new HARD drive with the arc command Scan. Tried to start again with the MULTI (0) in my boot.ini and it worked... I also had my windows install CD in. Maybe that is why I could not start, windows needs the CD to complete the installation? Weird, I don't know what I did to the difficulty it... but hey, it works! Thanks for your ideas guys!

• After saving the emails from windows live mail, why not open them on my computer as the file extension is wlmail.fol?

  After saving the emails from windows live mail, why not open them on my computer as the file extension is wlmail.fol?

  wlmail.fol is a tiny text giving the name of the folder. The exported messages will have filenames like 00D13E83 - 000025DF.eml. If you don't see all of the files like this, your export probably did not work properly.

  For a successful export, follow these directions:

  1. Set Windows Live Mail to work offline before starting.
  2. Create a temporary folder on your desktop * to contain the exported messages.
  3. In the Export Wizard, select the temporary folder, and then select all the folders.* *
  4. When it is complete, check that the number of files in each folder to the temporary folder is one more than the number of messages in the corresponding folder of WLMail.
  5. Copy the temporary file to its final destination.
     If you use a reader not NTFS to do this, you will see a warning that certain file properties will not be copied files. This can be ignored.

  * Windows Live Mail do not work with files that are not on a local drive, as opposed to an external or network drive. This is avoided by using the office as a temporary folder location. 
  * If you want to export the files sampled only, select each of them containing messages. Subfolders are not automatically selected by default.

• I used a password reset disk to access the Password Wizard, whenever I have propose a new password, it gives the error message

  I used a password reset disk to access the Password Wizard, whenever I have propose a new password, it gives the error message "" an error occurred while the wizard attempted to set the password for this user account". I can't pass this screen and am virtually blocked the computer phone iam trying to access. What can I do? It comes to Windowns 7 Home Premium

  This probably means that your password disk drive is not up-to-date. Here are the other options built into Windows to help you get out of this situation:

  • Restart the computer with your Windows repair CD, then use system restore to set Windows in a few days (only works if you have recently changed the password).
  • Log on to your account admin to spare, and then reset the password for your existing account (works only if you set up an alternative admin account).
  • Log in as administrator mode without failure, then reset the password for your existing account (the password is usually empty).
  • Use the password indicator (only works if an indicator was created and if it's good enough to allow you to guess the password)
  • Check your paper files (works only if you threw down the password somewhere)