Mac Mini blocked, does not respond to the keyboard

Similar Questions

• Satellite 200-170-keyboard does not work and the keyboard stops working

  My U200-170 2.5 years, I have the following problem:

  When after the start of the key is opperated the keyboard does not work and the keyboard no longer works (works until the button is pressed) connect a keyboard and a usb mouse. does not work because that device unknown. After Internet received external usb driver work ok. someone at - it an idea to solve this problem.

  Thank you

  AJAN

  Sounds like keyboard problem.
  The operating system uses the pilot to clean keyboard and generally it s not necessary to reinstall the special keyboard driver.
  But one thing is really strange; the yellow exclamation mark in Device Manager

  Eventually it s only a problem of software in such a case, a system restore can be useful...

  Have you checked if the keyboard works in the BIOS?
  Do this!

  If the keyboard does not work in the BIOS, then you will need to replace the internal keyboard with the new.

• Thunderbird starts by does not respond after the update to version 38

  I've updated to version 38.0 yesterday and since then whenever I open Thunderbird, he refuses to open and top watch does not respond. I have to close it via the Task Manager. What's past and how to fix it?

  > I tried in safe mode and it opens and I see my mail but when I try again to open it in mode normal it is just the same thing.

  This clearly suggests that something you added to Thunderbird or the operating system is causing at least some of your problems. If the problem occurs with the OS in normal mode and Thunderbird in SafeMode - http://support.mozillamessaging.com/en-US/kb/safe-mode - then you should suspect a program that is loaded by the operating system, such as antivirus. But if it helps me to http://support.mozillamessaging.com/en-US/kb/safe-mode , then the problem is related to an add-on, or accerlation of material found in tools | options | Advanced | General

• G6 2312ax Pavilion: Pavilion g6 2312ax keyboard does not respond after the death of hard drive

  My laptop received disc hard failure two months and he died since then. I intend to change the hard drive of the laptop as soon as the order arrives in a few days. But now the problem is that as if now the keyboard of my laptop does not respond. So I would like to know if this problem will be resolved after the replacement of hard disk or is related to the software / operating system of your laptop?

  Help, please...

  Sorry I couldn't answer yesterday.

  The update, is that when I tried to turn on the laptop as well by pressing the ESC. The laptop did not respond initially but then responded in the end, but after that, there is no answer.

  Now Mr. President, I would like to know your end on this issue?

  Thank you

• ccSvcHst.exe inhibits the CPU at 100% on XP Media Center 2002 (Service Pack 3). PC does not respond until the end of ccSvcHst.exe there domination of 30 to 90 minutes.

  ccSvcHst.exe consumes CPU: (XP Media Center 2002 w/Service Pack 3)

  • PC does not respond, until ccSvcHst.exe completes his domination of CPU from 30 to 90 minutes.
  • Completely consumes 100% CPU AMD Athlon 64 4000 + (4 GB RAM).
  • Has always been a problem with Microsoft Media Center o/s, which has worstened and occurs more frequently.
  • The PC makes it completely useless.
  • Unable to complete the process or decrease its priority.
  • If hardbooted, the ccSvcHst.exe process usually will continue during the restart.
  • Running Norton 360.
  • Please indicate if you need additional information?
  • Thank you in advance with the help of solution (s).  Your help is greatly appreciated!

  ccSvcHst.exe consumes CPU: (XP Media Center 2002 w/Service Pack 3)

  • PC does not respond, until ccSvcHst.exe completes his domination of CPU from 30 to 90 minutes.
  • Completely consumes 100% CPU AMD Athlon 64 4000 + (4 GB RAM).
  • Has always been a problem with Microsoft Media Center o/s, which has worstened and occurs more frequently.
  • The PC makes it completely useless.
  • Unable to complete the process or decrease its priority.
  • If hardbooted, the ccSvcHst.exe process usually will continue during the restart.
  • Running Norton 360.
  • Please indicate if you need additional information?
  • Thank you in advance with the help of solution (s).  Your help is greatly appreciated!

  The list file you most often is a process associated with Norton 360. However, malware is sometimes assumed the names of the legitimate files in order to deceive the end user. Norton is a Devourer of known system and as a result, I wouldn't be surprised to learn that he is a legitimate file in your case. However, I recommend you download, to update and scan with Malwarebytes and Superantispyware, just to be sure. If the scans do not detect the file and the problem persists I would contact Norton or remove Norton making sure to use the tool to uninstall do.

  Malwarebytes.org

  SUPERAntiSpyware.com | Remove malware | Remove spyware - AntiMalware, AntiSpyware, adware!

  Sometimes to decide what battles to fight the toughest battle of all... Visit my forum @ http://repairbotsonline.forumotion.com/forum.htm

• When the Admin sign on the office comes to the top, but after that the computer does not respond when the user tries to do anything. There are actually turns off the computer with the power button.

  Original title: user profile

  My administrator user profile does not work properly, but I have a user profile that has activated the parental control that worked well for about a year and yesterday when this user logs on the desktop comes up, but after that the computer does not respond when that user tries to do anything. There are actually turns off the computer with the power button.  I ran a virus scan and spyware scan in my user admin profile and he has not found anything.  I don't know what to check.

  Hello rhunter15,

  There may be a program to interfere with Parental controls so that we can try a few things to see if we can determine the application or program that is causing problems.

  First of all, we run System File Checker to see if you have a corrupt file system.

  • Click Start
  • Click on all programs
  • Click Accessories, and then right-click on the command prompt.
  • Select the Security tab and choose "Run as Administrator"
  • Click on command prompt
  • Type SFC/scannow.

  It will scan and repair any damaged operating system files.

  To determine if there is a program because of a conflict, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem.  For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base.

  KB 929135 - how to solve a problem of performaing a clean boot in Windows Vista.
  http://support.Microsoft.com/kb/929135

  Once you have finished the clean boot, check again and see if you get the error of parental control.

  If please post again and let us know if that helped pinpoint the problem or if you still need help.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Left click of the mouse does not respond in the office and I could see 2 together (Picture) Office

  Everything works well today that the left click of the mouse is not responding on the desktop (icons does not meet the double click). Right click works ok, and left click works well on programs and in the taskbar.

  Weird things here, it's that I can see two desktop at the same time.

  I have attached a picture.

  Can someone help me?

  Thanks in advance.

  

  I got disabling the system restore, so I can't go back to a good version.

  Turn off the system restore makes things much more difficult. Your problem is probably due to an inappropriate registry setting. You can restore your registry files manually to a previous point through the steps described below. The process is complex and requires some careful typing. Ask a computer-savvy friend to help you if you lack experience in this field. You may reset your password to an earlier value.

  Check the date of the file C:\Windows\System32\config\regback\System. It precedes the date when you became aware of your problem? If so, follow these steps:

  1. keep tapping F8 during the first phase of startup.

  2. Select repair in the menu that looks like this.

  3 log in as administrator if you are prompted.

  4. Select repair when prompted.

  5. Select the command line in the menu that looks like this.

  6. identify the correct drive letter for your Windows installation. It could be one drive other than c, but it will not X:. You do this by typing commands
  DIR C:\Win*
  Dir D:\Win*
  dir E:\Win*
  until you find the Windows folder.
  I'll call this "Q:" drive
  7 type these commands exactly:
  CD /d Q:\windows\System32\config
  xcopy *. * Q:\MyRegBack\
  CD RegBack
  8 type these commands:
  copy software / y...
  /y copy system...
  /y copy Sam...
  (the two points are part of each order)
  10. restart normally. If things don't work then you can go back by copying files from the original register of Q:\MyRegBack to Q:\Windows\System32\config.

• Superior 1/4 screen does not respond to the mouse - cannot disconnect sites when Logout button is in this area, IE. Facebook, banks, etc.. This does not happen with IE. I reinstalled Firefox without result.

  Menu bar, tabs, history, research, etc. work fine, but in this area, I am unable to access anything whatsoever. For example, on the Firefox help screen the area on the right side of the screen that shows my user id - Sign Out - Inbox - and other applications will not respond to the mouse. Therefore, I will be unable to sign using Firefox. This is true for every Web site I have access. Fortunately, at least one of the banks that I use has an additional journal on area at the base of the screen that can be used.

  Recently, the extension of the Yahoo! toolbar and the extension of Babylon have been reported to cause a problem like that. Disable or uninstall the modules.

     * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
  

• Touch Pad Mac Book Pro does not work since the 10.11.3 update

  My touch pad does not work since the update of El Capitan 10.11.3, y at - it nothing to do with this update or is this a hardware problem?

  Mouse Magic Mouse and USB work correctly

  Try SMC and NVRAM resets:

  https://support.Apple.com/en-us/HT201295

  https://support.Apple.com/en-us/HT204063

  If no success, make an appointment in an Apple store genius bar.  The assessment will be FREE.

  Ciao.

• My original opening on a new Mac Mini installation does not work. I have the series or available

  Opening 1 and implemented to date are installed on a MAC Pro: 2 x Dual-Core Intel Xeon 2.66 GHz. memory 5 GB

  Software: MAC OS X Lion 10.7.5.

  Now, I would like to install Aperture on a new Mac Mini: 2.6 GHz Intel Core i5. OS X: El Capitan.

  All the series nor are available.

  But the Mac Mini can't find software to install, even if the disk is in the drive.

  Need your help to tackle this problem.

  Thanks in advance

  Opening 1 does not work on El Capitan. You need minimum Aperture 3 and which is no longer sold. Time for a new plan.

• Mac Mini - Finder does not open

  I have a Mac Mini with os x 10.10 2014.  The boot disk was almost full and the finder does not open.  I open the iPhoto and deleted the pictures and then empty the trash in iPhoto.  By logging in as a different user, I see I have ~ 1 GB of space, but when I log on my main account and admin the finder does not always open.

  I read that it was a known issue:

  http://forums.MacRumors.com/threads/Finder-doesn.

  It is said to remove the .plist files, but I can't get to Terminal to do.

  Please advise, thank you!

  Edmund

  If you were able to connect as another user, the issue is not lack of storage - this is the same computer.

  Yes, your .plist file may be corrupt, or you could have an extension conflict that affects only your user account.

  Try the start mode by holding down the SHIFT key at startup. Secure boot is quite slow because the operating system does a lot of cleanup and verification tasks, so give it time. Once you're completely connected, restart normally.

• Mac Pro 2013 does not connect to the hard G technology drive

  Hello

  I recently bought a Mac Pro and I am trying to transfer files from my hard drive mini 1 TB of G technology itself. The files came from a backup who was recently transferred to my 2011 macbook pro. I tried using cord USB 3.0 for the Mac Pro doesn't have a firewire plugs, but it does not recognize my hard drive. The hard drive is not showing any signs of work because I don't hear the fans turn on the player. The hard drive connects perfectly to my macbook pro via firewire, so should I buy a bolt of lightning for this firewire adapter? I really hope that I don't need to buy a new external, but I'd love to hear a few options for this issue, it would be greatly appreciated.

  Best regards

  May be that the USB port does not provide enough power. Sabrina drve is provided with a plug that allows to connect a plug to an AC wall power supply.

  The manual

  http://www.g-technology.com/sites/default/files/fields/field_files_pdf/product/g-drive_mini_3.0_usermanual_r3_1015.PDF

  Neither the Web site

  ve http://www.g-Technology.com/Products/g-Drive-Mini-1-TB-External-Desktop-Hard-DRI

  give the voltage of power

  It works via the USB port on your MacBook? The USB part is maybe defective.

• bridge to aid does not respond after the effect presets

  Bridge stops responding when you try to use or to get an overview after effect presets. The application never gives me the error "not responded" but but does not not in stocks. It could be because the computer is old?

  MAC

  10.11.4

  3.2 ghz intel core i3

  12 GB of ram

  ATI radeon HD 5670

  Measures taken

  Destroyed bridge preferences.

  Uninstalled the application > Reinstalled

  Thoughts?

  This has been resolved with the new Update 2015 bridge

  

• Key combination does not respond before the start

  Hello. I have a macbook pro 13 "2015 retina.

  The problem I have is the same as the title, but it's not regular "choose the appropriate settings startup disk' because I tried already several times.

  Mind you, none of these problems remain once Mac OS startup has finished, it is just the period prior to initialization.

  Here is the list of problems.

  1. There is a very long period of black screen (backlight on) between the startup sound and the apple logo appears on the screen.

  2. start after key combinations take a long time to register. For example, 'boot disk selection window' takes more than 2 minutes of waiting. I have to wait while pressing the option key. It also applies to enter recovery, reset pram, entering the diagnosis, enter safe mode, etc..

  3. once I finally get a function running, there is a delay of keyboard/trackpad. Interactions appear unusably slow on Boot Disk selector and Internet Recovery(wifi selection). Trackpad responds a minute after I hit, it is the keyboard.

  4. There is no wifi signal on Internet recovery for about three minutes (my hotspot is 5 cm behind my mac).

  To sum up, it feels like the processor is clocked at 5 Mhz or something.

  Here is a list of what I tried.

  1 reset the smc, pram

  2 reinstalling Mac OS

  3 internal SSD flash disk formatting and installing Mac OS

  4. remove the boot camp

  5. remove the magsafe

  6 safe mode (no matter, because I do not think it is related to Mac OS anyway)

  I have no external devices or readers, all that is present is the magsafe.

  I always have Apple Care has left, so feel free to tell me if you think it's a hardware problem. Thank you for reading, and I appreciate your help.

  Please make an appointment at the Apple Store - Genius Bar store and bring it into service. If you are in the United States or is unable to make an appointment in this way, contact your Apple store.

• My iPad2 keeps freezing and does not respond to the touch screen taps or swipes.

  My iPad2 (Version 9.2.1) keeps freezing when I'm online.  It does not meet my touch/slide.  The storage capacity is 12.6 GB, and I have 2.0 GB available. I tried to l ' down and restart, but that doesn't seem to help. This only seems to happen only when I'm online (as you try to read a recipe online, or navigate through a Web site).

  Try the settings app, Safari, turn off / disable Safari Suggestions.