Mac OS 10.4.11 using HP5150 printer: does not connect

Similar Questions

• Mac 10.6.8 Business Inkjet 1200n - printer does not print (printer error)

  Mac 10.6.8 Business Inkjet 1200n - printer does not print (printer error)

  Anyone has an idea how to get pinter will again? I loaded a current printer driver, but it did not help. The pilot goes hand in hand with this Mac OSX. I restarted the printer. Still no luck.

  Help!

  Hello

  HP Business inkjet 1200 series is not compatible with Snow Leopard, as you can find below:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/learnUseDisplay/?sp4ts.oid=411179&spf_p.tpst=psiContentDisplay&spf_p.prp_psiContentDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c01856359-9%257CdocLocale%253Den_US&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Try solutions third 3rd as HPIJS, which seems to support your printer and should provide basic features of the printer.

  Don't forget to install one of the prior agreement of 3 downloads required as a result of the printer, configure the instructions:

  http://www.linuxfoundation.org/collaborate/workgroups/OpenPrinting/macosxhpijs

  Shlomi

• New router, same info. Printer does not connect. Help?

  I have a printer all-in-one Officejet 4620 wireless. I have a new router (the same brand and model brand new), and none of my info has changed. My printer does not connect to the internet more. Always has the info saved just does not connect. I had to re - enter the password in all my other wireless devices, but how do I do on this printer? I'm sure it's my fix. I have searched all over the Control Panel, all the web help HP, used the scan doctor and even called HP and they said that my warranty is out I have to pay for my support. Still an issue like this... Was a bit irritating. Or if I have to reset the printer to the factory and Redo setup wizard is too cool. I tried this one on board printer under network without success. Any help on this would be great! Thank you!!

  Let's try here.

  Replacement of your wireless router

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• HP Deskjet 2540: Printer does not connect

  Hello! I managed to connect my printer via the cord, but all my efforts to connect wireless have not been successful, even after you install the drivers appropriate for Windows 10. It seems to connect and to detect the router but when it promts me to enter information to check the connection, it does not connect. He also promts me to enter the information that is displayed on the printer, but it is not anything related to this wireless network. Help, please!

  Hi @paige101us and welcome to the Forums of HP!

  I see that you have connectivity problems.  I would like to help!

  I would recommend your computer off.  Once the computer is down, unplug the power cord from the printer and the electrical outlet and remove the power of your router for 60 seconds.

  After 60 seconds, reconnect the router.  Once the router has started broadcasting, reconnect the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  After that the printer is turned on, run the wireless configuration.

  I also suggest this document:

  Troubleshooting wireless printing Center

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Canon printer does not connect via the IPP Protocol

  I work in a company that sells printers offices/schools/etc. Yesterday, we received a call from a customer indicating that the Copier, we sold them connected not to a new computer they bought.

  I went to the site and noticed that the computers in question were all purchased during 3 months and all loaded with Mac OS X El Capitan. Most was registered on 10.11.3, and some 10.11.2 and 10.11.1. All computers work turned Yosemite.

  We receive a message somewhere in the sense of "Communication error. This printer may not be able to [print], you want to save it anyway? »

  It was a cannon imageRUNNER Advanced C5235. The client declares that if he saved the printer, it would not be able to print, but would still see jams paper, messages and other statutes of the computer printer toner. After attempting to remove and reinstall the printer using the most recent driver available on the Canon Website, we received the same error, the customer received. We escalated it to Canon support, who asked us to choose LPD instead of the PPI for the Protocol, allowing the printer to you connect and start printing on all devices running El Capitan.

  After further research, to my knowledge, the ISB is more recent and has more features that the LPD, although I couldn't find much on it so I was uncertain about the origins of these two protocols, except that they were introduced in the 1990s. I know it's kind of vague, but is better/more recent than PPI LPD? If so, great. Otherwise, is there a way to solve this problem and get computers that run El Capitan to connect correctly using IPP?

  The problem here is that the driver Canon UFR2 or PS that was used on the Mac to print in ADVANCE of Canon C52xx does not support PPI. This is why you must use an alternative Protocol.

  Note that it is possible to print to the C5255 using the PPI, but you need to use the Canon PPDs which means the copier must have the kit installed Postscript printer and you get not the pretty picture base views the pilot UFR2 and PS to give you.

  Second point is that the Canon UFR2 and PS drivers, it is preferable to use HP Jetdirect-Socket to the LPD protocol. He sent larger packets and verifies the status of the target unit - LPD simply sends data to the fixed IP address so if the printer has a problem you don't get this information until you walk up to the photocopier.

  I hope this helps. Answer if you need more information.

• My printer does not connect to Web Services.

  I wish I could ePrint.  I use my wireless (Apple's Time Capsule) and I am able to print wirelessly on my Photosmart 7515.  The printer is connected to the wireless network.  BUT Web services will not work and ePrint now does not work (it worked when I first set up the printer, but is no longer works).

  Troubleshooting page here used on... off site and return on internet connection and printer from the console, then on to connect to Web services, somehow that had been extinguished, but has not been highlighted by one of the errors provided, lit, which allowed ePrint and then after waiting a few minutes while pending jobs do not print , he returned to cancel the manual DNS entry proposed in the above posts and chose automatic DNS.  Immediately the ePrint and printed elements works now.

  Thank you.

• Phorosmart d 5510: printer does not connect to the network upgrade

  A combination of problems:

  I recently updated my broadband and also bought a new computer

  Today my printer has stopped working. I tried to reinstall, but my desktop computer, or laptop can connect with him. I checked this is the connection to the server, but it will connect with the SSID of 2.4 ghz. WiFi on my computer works with the SSID of 5 ghz. I guess that's the problem, but the printer will not recognize or find the SSID of 5 ghz

  Hello Dudley151,

  Thanks for stopping by the HP community! I see that you are facing problems with wireless connection. You have changed networks and are unable to get the connected printer.

  Yes, the problem is HP printers are not compatible with the 5.0 GHz networks.

  To get a better understanding, take a look here: wireless printing Center

  I hope that answers your question.

  This is a great question other clients may also wonder; Please click the "accept as Solution" if you think that this message has helped you, or could help others. You can say thank you easily by clicking on the ' Thumbs Up ' below!

• Mac 0SX installed the ink cartridge; aligned; printer does not print HP Deskjet 3520

  I just installed a new ink cartridge, lined up and tried to print my point.  The paper feeds through but nothing prints.  Is

  There is something else I need to do, or something that I did I shouldn't?  Have already installed cartridges spare and never had this problem.  Thank you.

  Hi NancyWB,

  I can't wait to hear that you have questions.  This could be a problem with the hardware cartridge or unit; However it can also be related to connectivity.  You are able to print a test page for the unit itself? Please see the procedure to print a test page for the device to determine if the material is shown below.  If the test page is empty or contains flaws, click here for the action on this issue.

  To print the page of unit test:

  1. On the product control panel, press the (arrow) down to select settings and pressOK .
  2. Press the (arrow) downward to select Tools and press OK .
  3. Press the (arrow) downward to select Print Quality Report and press OK . The report prints.

  I hope this helps!

• Printer does not connect to Windows

  I have a 20 "intel computer core duo iMac with Leopard 10.5.6 and side Windows, I use Windows XP Professional.  I have a HP Deskjet 6988 printer wireless connected via Airport Extreme.  I installed VMWare Fusion 2.0.1.  This works perfectly (internet access, programs, etc.) except it won't print from any Windows application.  It gives a message "not responding" when I try to print.  "Printers and faxes" control panel shows the right printer with a check box indicating that it is the default printer.  I did a search for this problem but can't find anything the same as this.  Can someone provide help please?

  about the only other thing I can think - in the VMware menu at the top of the screen, go to the Virtual Machine, then settings, then activated is checked and make sure that you have scored the Match the default printer on Mac.  Have you tried?  It's the only other place that I see any reference at all to what printer you use w / VMware Fusion unfortunately.  Sounds like your settings Windows is correct, so I hope that's it.

• 7520e HP photosmart all-in-one: 7520e photosmart printer, does not connect to web services

  My printer was working fine, I share wireless between your desktop 8.1 windows 64-bit, windows 7 64 bit desktop and a windows 8.1 64-bit laptop, the latter is rarely used although it remains connected.

  Now, for some reason, my printer cannot connect to web services, it says an error has occurred, but you may still be able to use some of our services.

  I can connect to e print without any problems and it is connected to my network and wireless, I managed to send faxes, but only from the top of the charger of my printer page and not my computer, but at least it works, I can do a sheet of coverage since the fax software.

  Is this one of printers who had a few apps taken away from him? If so, this may be the problem with the web services.

  I uninstalled my software to print several times and re installed as has a HP technician but still no luck.

  Any ideas please.

  It print and scan very well although I have on my desktop windows 8.1 for the moment, I still have to

  install it on my windows desktop 7. Last night, when the technology installed on my windows desktop 7, he says you correctly it installed-windows 8.1 desktop, which of course was incorrect. I am the administrator on office computers, no homegroup, or user accounts, I just choose to share.

  Hello @emma22,

  Appreciate your efforts.

  Please check the picture below:

  

  Go to printer EWS - network - wireless - IpV4

  Click the manual IP address - suggest a manual IP address.

  Select the manual DNS, then choose 8.8.8.8 and 8.8.4.4

  Save the settings.

  Let me know how it goes.

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• just bought a lexmark s505 printer, does not connect to vista Home premium assistance required please

  can someone give advise please

  Have you followed the guide to use during the installation of the unit: http://support.lexmark.com/index?locale=en&page=product&productCode=LEXMARK_INTUITION_S505&segment=SUPPORT&userlocale=EN_US&frompage=null#2

  Most but not all multi function printer/scanner requires that the software is installed before you actually connect the printer.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• device epson nx510 printer does not connect to the network.

  Our wireless high toshiba ride on our printer in another room has stopped working and cannot print. The printer prints for our desktop, so that the printer is operational. The lap top can access internet via wifi to the router. Our network provider is Verizon FIOS. All of the suggestions. Thank you.

  Hello

  1. What is the operating system installed on your computer?

  2. you get any error message?

  3. were there any changes made to the computer before the show?

  Please follow the steps in the link.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• HP Oficejet J4540 printer does not connect

  I am running Vista 32 bit. Download drivers latest for installation. I can't go to the HP Officejet J4540 printer. That is what it is?

  Hi Jcamp73,

  1. When was the last time that the printer worked correctly?
  2. is there any recent changes to the computer?
  3. are you able to print a test page for the printer?
  4. what happens when you try to print?
  5. do you experience the error message?
        
  I suggest you for this see below section provided assistance Windows and check if the problem is resolved.

  Reference:

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  See also:

  Problems printing and printing errors
  http://support.Microsoft.com/mats/printing_problems/en-us

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• 2540 all-in One: 2540 printer does not connect via radio

  Dell Inspiron Windows 8.1 64bits, lesst of one year

  HP 2540 all in a Priner single, new, right out of the box

  Router NetGear WGR614 v9 (2008?)

  Unable to connect wireless.  OK, via the USB port.  Need a wireless connection.  Doctor Scan is without help.

  Who did. Thank you. I do not understand why IT worked, but it setting up wireless initially failed. It was VERY frustrating. I was ready to trash this abiut printer.

  P.S: it prints very well. Photos of ESP. My children and I are very impressed.

• HP 5530 Envy: Would print not; Software reinstalled now printer will not connect

  I printed 2 pages of a document and another need.  When I went back to try to print again, it got stuck and would not take the step to go to HP ePrint.  I tried 2 other times.  Then I cancelled all print jobs 3 and tried to print something different.  Jobs canceled is stuck trying to cancel, and the other document would not print.

  I checked the edits and reinstalled the printer software.  Then I unplugged the printer, and it wouldn't reconnect.

  I uninstalled the software, reinstalled, printer does not connect.

  Restarted the computer, printer does not have to connect.

  I had this problem before, but not for a while.  I guess it's a problem with Windows 10.  I was going to make the resolution of the problems, but it is configured for Windows 8.1.

  I ended up going to the support page for my printer, so the link that you sent in step 3 of solution 1.  I looked through the help desk, but they do not have my problem.  Then, from there, I stopped using these steps and went to the software and drivers link to see if something was missing.  It shows all of the software I have access to, but it is not very clear from this first page on what I actually need to add.  I downloaded the HP Printer Wizard and follow these steps, and now my problem is solved.  However, at the end of step 2, he said that if my printer was connected to the radio, I should stop troubleshooting.

  As I said before, it was not a matter of my printer is not not on my wireless connection.  When I double click the icon of the printer front and selected 'add a new printer' he would not this process.  The wireless never disconnected.  The rest of my computer just not see it.  While I was with the installation wizard, he says that most of the drivers were there but some elements were not, so that solved the problem.

  Thank you for your help.  Although not exactly what I asked, you still have the page that solved my problem.