Mac printing wrong tray HP C7280

Similar Questions

• HP officejet 8600 - problem print to tray 2 using macbook pro

  I fixed tray 2 by default - but the printer wants to use tray 1

  I solved the problem!

  Press the power button to turn off the printer - disconnect the power cord from the electrical outlet - remove and reinstall the tray 2 paper tray

  Remove and reinstall the tray 2 - gently lift the HP printer out of tray 2 - gently lower the printer on tray 2

  My computer is a Mac (OS X 10.7) - on the MacBook Pro - go to system preferences and then print & Scan click on the printer and then click Options & supplies, and then click the driver tab - select the option tray 2

  It's as simple as that!

• HP Officejet Pro 8600: Printing from tray 2 Hp8600

  I recently bought a 3 microsoft surface, and for some reason when I go to print I can no longer select tray 2, happens with tray 1. I have tried a number of things, looked at preferences and even followed the steps in this post http://h30434.www3.hp.com/t5/Printer-Software-and-Drivers/Easy-selection-printing-to-tray-1-or-2/td-... all the way to step 33, but the paper/quality tab is not either.

  Can anyone help?

  Hi danjambal,

  Thank you for your answer!

  The steps for Windows 8 will run on Windows 10. Please, try the following:

  1. Right click or touch and hold the bottom left of the screen to open the menu. In the menu, click or tap on the Control Panel, then click on or type printers and display devices.

  2. Right click or tap and hold the icon of the printer () for your printer, and then click or tap Print Preferences.

  3. In the Printing Preferences menu, select paper/quality.

  4. In the paper Source drop-down list, select tray 2.

  5. In the paper size drop-down list, select the size of paper suitable for the print job.

  6. Click or click on apply, and then click or tap on OK.

     NOTE:

     Follow these same steps for the default print tray back to Tray 1.

  If these steps do not work, there could be a nuisance pilot. Please try our HP print and Scan Doctorand let me know what happens!

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this post is helpful!

• DeskJet D2360: Deskjet 2360 - prints wrong colors, even if the test page seems well

  In 10 (64-bit) Windows, Deskjet D2360 prints the well test page, but the colors aren't any application (documents, photos...). Cyan looks like dark blue. Green also appears dark blue. I just updated the drivers from the HP website, but the behavior remains the same.

  The problem appeared after Windows 10 updates (January 2016 and later versions).

  Print and Scan Doctor couldn't fix it. Help!

  (Suggestion: If your printer prints the test page, why not propose an image file with what the test is supposed to look like.) This is useful especially to confirm colors. If I have a print test and see a few squares of color, how could I know if they are the correct colors?)

  After a long period of frustration, I found the non-professional magic solution:

  http://h30434.www3.HP.com/T5/inkjet-printing/printer-prints-wrong-colors-after-Windows-10-update/TD-p/5242565/highlight/false/page/3

  Print a test page with HP print and Scan doctor. Once the problem is resolved.

• HP Officejet Pro 8620: Selection easy printing on tray 1 or 2

  We have an Officejet Pro 8620 with extra paper tray. Tray 1 for Virgin paper, tray 2 for the paper with the logo of the company.

  Now, when we want to print to tray 2, we reject Tray 1, whereas, after a few attempts the software switches to tray 2 and printing begins.

  It is possible, before printing, to change the setting in the software, select printing for tray 2. But it's pretty heavy.

  We want an easy way to select printing for Tray 1 or the tiroir2. For example, as seen in other environments, so that we can choose to print on:

  -HP Officejet Pro 8620 (Tray 1) or

  -HP Officejet Pro 8620 (tray 2)

  This could be seen as a separate printers. How can we achieve this?

  Change the setting every time, is not a good option. In addition, we have other software that we want to configure so that they automatically print to the correct bin.

  Thank you!

  Hello @Sing020,

  Welcome to the Forums of HP Support!
  
  I would like to help you today with the addition of two copies of your HP Officejet Pro 8620 e-all-in-one printer to your Windows 7 computer to make impression on tray 1 and 2 of the State Bar an easier process for you. Can I please you follow the steps below.

  1. click on the Start menu

  2. Select devices and printers

  3. in the devices folder and printers, you should see your printer HP Officejet 8620 installation

  • Before you continue, we must determine how your printer is connected. If you have a printer Wireless HP Officejet 8620, on the front panel of your printer, tap the Setup button.  Select Network Configuration. Select the wireless settings. Touch Wireless details. Make a note of the IP address.
  • If you have the cable plugged USB printer please right click on the HP Officejet 8620 under the printers and devices folder and click on printer properties. Click the Ports Look under the list of Ports for the port selected for your printer. There should be a check mark next to one of the USB ports. If you move your mouse over the Port is expected to show you the full name (USB 0001, 0002 USB, USB 0003, etc.). Note the number of USB Port.

  4. then right click on the HP Officejet 8620 which shows currently installed on your computer. Left click on Printing Preferences.

  5. on the paper/quality tab, select the paper sizeand tray (Tray 1) .

  6. click on apply and OK

  7. right click on the HP Officejet 8620 last once and click on Printing Preferences. On the general tab, you should be able to add (Tray 1) at the end of the name of your printer.

  8. click apply and then OK to save the changes.

  9. now, must be added in the second copy of your printer. Please close devices and printers for a moment.

  10. click on the Start menu

  11. in "search programs and files" box located just above start type % temp % and press enter on your keyboard

  12. when the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.

  13. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.

  14. close the Temp folder when it is empty

  15. right-click the recycling bin on your desktop and select empty recycling bin

  16. click here to download the driver Officejet 8620

  17. when the download is complete extraction will occur and may open an install window. If an installation window opens, Please close it.

  18. click on the Start menu

  19. in the box "search programs and files" type folder and press enter

  20. when the Temp folder opens, find the file 7z. Click once 7z folder to open it , it

  21. at the top of the page, you will see the path to the file. It should show something like: Local C - users - AppData - Local - Temp-7z drive... Left click on the right side of this bar of the file path. All that will now highlight in the path of the file. Right-click on the path of the file to highlight then copy it.

  22. close the Temp folder

  23. click on the Start menu

  24 click on devices and printers

  25 click on Add a printer in the top

  26. click Add a local printer and click Next

  27. click on use an existing Port. Click the menu drop down and choose the exact same port that your HP's Officejet 8620 at current address is installed on. Press Next.

  28. If you are brought to a list of manufacturers and Printers, click disk , at the bottom right. Right click on the bar of path of file in the window "install from disk" and "Paste" in the path of the file we copied previously

  29 press on Next to complete the process of adding

  30. Once you are taken back to the devices window and normal printers, you should see two copies of your installed HP Officejet. If you see only a single copy, your computer can be grouped under the same icon. Make a right click on the HP Officejet see you and now need arrows next to the options (options print, the print properties, etc.). If you click on the arrows, you will see two copies of your printer.

  

  31. right click on the HP Officejet 8620 we set up for tray 2

  32. left click on Printing Preferences

  33. click the paper/quality tab

  34 select the paper in tray 2 trayand set the paper size

  35. click on apply and OK

  36. you can right click on your HP Officejet one more time and select printer properties.

  37. rename this copy to HP Officejet 8620 (tray 2)

  38. click on apply and OK

  Now when you try to print, when you select the file and print , you'll see a Tray 1 and a copy of your HP Officejet tray 2 . Simply choose the copy that corresponds to the status bar you want to print from.

  Please let me know if the steps I have provided to resolve your problem. It may seem like there are a lot of steps, but it's really an easy process. I wanted to give you as much detail as possible for scenarios that may occur. Good luck!

• Officejet 6310 does not print in color but Mac prints a color scan

  Officejet 6310 does not print in color but Mac prints a color scan

  Awesome!

  Thank you very much.

• LaserJet P4015x - cannot print on tray 3 of Linux (Ubuntu 12.04)

  I installed a LaserJet P4015x on Ubuntu connects via the JetDirect port (9100).

  Among the printing options, I can only choose these origins of paper:

  * By default-> Priints on bac2

  * Photo tray-> Priints the Tray1

  * High plateau-> Priints on bac2

  * Set-> Priints the Tray1

  * CD or DVD tray-> Priints the Tray1

  * Enveloper Feeder-> Priints the Tray1

  * Large capacity tray-> Priints on bac2

  * Manual feeder-> Priints the Tray1

  * Multi Purpose tray-> Priints on bac2

  All these origins of paper are assigned to Tray 1 or the tiroir2, so I can't print on tray 3. What can I do?

  I think I knew how to do this job.  Here's what I did:

  Open the properties of the printer

  On the settings tab, click on 'Edit' next to the make and model.

  Select the printer from database

  Choose HP and click Next

  In the models list, click on "HP LaserJet 4010"

  The drivers list of HP LaserJet P4010 series very.

  Click next and choose 'Use the new PPD'

  Click Next, select the appropriate Installable Options, and click on apply.

  You may need to upgrade the HPLIP software on your system.  If so, it can be downloaded from http://hplipopensource.com/hplip-web/index.html

• HP LASERJET 4050: HP LASERJET 4050 PRINT JOBS WILL NOT PRINT FROM TRAY 2

  I have a HP Laserjet 4050 printer and it won't tank prnt 2.  It prints from the manual feed tray 1.  It does not recognize tray 2 printing, but it will let me know when the tiroir2 is missing.  No idea what this could be or how to fix it?

  Any help would be greatly appreciated.

  Toni

  If you print a configuration page using Tray 1, then you can look and see what paper size and type it thinks are in tray 2.

  You will see probably is one of these elements is bad and most likely it is misdetecting the size of the paper due to a failure of the Board of Directors that detects the position of the fingers on the side of the status bar.

  I think you have probably found a message on the screen that says load paper in Tray 1 whenever you try to print from tray 2, if this is the case it should also allow you to hit the go button and print using any type of paper or the size it considers is in tray 2.

• HP photosmart 8250: 8250 printer paper tray doesn't slide.

  8250 printer paper tray doesn't slide, seems blocked but nothing seen looking into the slot, how can I get the tray to go?

  I was able to get and apparently there's a shift to the right if the tray is not directly aligned it will only partially.

• Office Pro 476dw - don't print from Tray 1

  Hello!

  I recently bought a 476dw Office Pro, and it will print from Tray 1 when I select an envelope #10 or legal size paper.  I am trying to print labels with a format sheet letter Tray 1.  I chose precisely the paper as "Tray1" Source, but it will not draw labels and printing from tray 2.  Can you please adivse how I can direct the printer to Tray 1?

  Thank you!

  It is a configuration problem simple set tray.  You must make sure that the sending application fits on the correct document settings work before it hits the printer.  Once the printer receives the job he will review the parameters type and format of the document as well as the tray configurations it has available.  At that point, he will decide to print on a platter or another or ask the user to perform an action so that it can continue.

  Try to print a sample of work such as work from another application.  If the same problem happens then there is a mismatch of the status bar on the printer.  If the problem does not recur from a different application there is a configuration problem on the initial application, which must be found and corrected.

• How to print to tray 2 on an HP Officejet Pro 8500 has a bonus?

  I can understand photos not be printed on plain paper in tray 2 (sort of), but I can't print emails or web pages to tray 2 of either ePrint Airprint GOLD.

  I have tray 2 as default and 1 locked drawer.

  If I try to print it will try to print from Tray 1 (containing the envelopes). the 8500 realizes the error and cancels printing.

  How can I print to tray 2?

  Thank you

  DHK

  Hey wa1oui!

  Unfortunately, ePrint or AirPrint support printing on tray 2 right now. If you print from an iPad/iPhone or other mobile device, you can use ePrint home & Biz application that will allow you to select a specific drawer.

  I hope this helps!

• Fax printing from tray 2

  I added my 8600 Pro Officejet tray 2. I have #10 envelopes in tray one and paper in tray 2. I can get it to print in all modes except the incoming faxes and he tries to print from Tray 1. I have the default to tray #2, I tray locked 1, in printing preference selections in the printer, I chose a tray 2, but this option is not available in the fax printing preferences. I tried to remove and reinstall tray and driver, I tried to download the latest driver from HP to no cure to my problem. Help, please!

  Hello ambulance,

  Welcome to the HP Forums.

  If you use something else than standard paper in tray 2, the default printer in Tray 1 for fax.  If you try to use the legal size in the second tray, this will also cause the issue.

  Please remove the paper from Tray 1 just enough so that it is not recognized by sensors in the printer. This will test the printer to make sure it will default to try the 2.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thanks for your time.

• 2175 PSC printing wrong w / mac 10.4.11

  running mac 10.4.11 and using photoshop 7 trying to print a picture (photo w / type) 2175 all in one have PSC impression starts and stops after printing of only about 1/5 of the image have uninstalled and reinstalled software downloaded and latest driver have restarted the computer unplugged all the same printer and re-connected connections

  any help appreciated and thank you

  There the error messages on the computer or the printer?  This happens only with the photo?  No problem when printing text?

  One thing I would check would be to open the printer and take a close look on the interior plastic parts.  If they appear coated with a thin layer of ink to spray, then rub strip coding as shown by clicking here.  Take into account instructions, you may damage the band of coding with mishandling.  Be nice :-)...

  Kind regards
  Bob Headrick, Microsoft MVP printing and imaging

• Home ePrint & Biz uses wrong tray when not the network printer

  Hello

  I recently purchashed a 7520 Photosmart e-all-in-one printer for my mother-in-law. While at home, on its network, we tested using the home & Biz application for android to send photos to the printer.  The app worked great and was able to use the tray photo 4 x 6 for the photos sent to it.  Unfortunately, when we were out of its WiFi all the images we sent used instead a regular sheet from the normal paper tray.  It's frustrating because the app allows you to select the paper tray, even when we are not on its network, but my selection is apparently ignored.  Send an attachment to a computer at the address of the printer eprint also don't have not selected the correct tray.

  Is there a setting I'm missing somewhere or is this a bug that I have to live with?  So, it defeats the purpose to buy this printer so that we can send photos of 1200 miles away.  Help, please.

  Calvin

  Hey I've referenced a post that would explain your problem.  I hope this helps.

• Epson WF-7520 does not print to tray 2 after El Capitan clean install?

  I don't know what happened, but since I did a clean install of El Capitan, my WF-7520 Epson no longer works correctly. The ONLY way it prints on the 13 x 19 (tray 2) is when I remove it and place it in the top housing (slot 1). In addition, all my photo quality controls are now gone, so high quality prints are no longer possible. I tried to remove and reinstall the driver, but that has no effect.

  For what it's worth, I print using Adobe Acrobat DC of more Creative cloud products. Anyone know what can be wrong?

  Rest the printing system...

  Open System Preferences > Printers and Scanners and select the print tab.

  Right click or control your printer on the left, then click on: reset printing system...

  
  

  Then try to print again.

  If that does not help, download and install fresh drivers from the Epson website > http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?infoType=Downloads & oid = 183585

  A new installation can sometimes corrupt the software/drivers and need a new facility.