Mac Pro 2013 (3.7 GHz Quad-Core Intel Xeon E5)

My Mac Pro running El Capitan (10.11.6) and has 12 GB 1866 MHz DDR3 ECC memory.

Recently, it runs very slowly.  Much slower than my laptop.

Any suggestions on what is happening and what I can / check?

Thanks in advance,

Pedro

Run and view the results here so that we know more about your configuration.

http://etrecheck.com/

EtreCheck

https://discussions.Apple.com/docs/doc-6172

Tags: Mac

Similar Questions

  • Hi my product is: bendahmane الطراز: Mac Pro معرّف الطراز: MacPro6, 1 المعالج of bendahmane: Quad - Core Intel Xeon E5 سرعة المعالج: ٣٫٧ غيغاهرتز عدد المعالج: إجمالي عدد المراكز ١: ٤ الذاكرة المؤقتة L2 (لكل حزمة): ٢٥٦ ك.ب.   ذاكرة مؤقتة L3: ١٠ م.ب.   الذا

    Hello

    my product is:

    Bendahmane الطراز: Mac Pro

    معرّف الطراز: MacPro6, 1

    Bendahmane المعالج: Quad-Core Intel Xeon E5

    سرعة المعالج: ٣٫٧ غيغاهرتز

    عدد المعالج: ١

    إجمالي عدد المراكز: ٤

    الذاكرة المؤقتة L2 (لكل حزمة): ٢٥٦ ك.ب.

    ذاكرة مؤقتة L3: ١٠ م.ب.

    الذاكرة: ١٢ غ.ب.

    إصدار Boot ROM: MP61.0116.B16

    MSC إصدار (النظام): 2.20f18

    إصدار lighting: 1.4a6

    الرقم التسلسلي (النظام): F5KMF27QF9VM

    للجهاز UUID: 500484C9-32CE-52F7-95AE-E4D9B79BD6A4

    my? is

    1. before a nearly a month, safari can doc xml oped as normal text, but it does not give me this msg:

    (This XML file doesn't have any information of style associated with it.)

    2 - there is a set of nested folders that I can't get rid of. Whenever I try to trash, he reappeared just a few seconds later:

    System > library > Caches > com.apple.kext.caches > start

    2 - there is a set of nested folders that I can't get rid of. Whenever I try to trash, he reappeared just a few seconds later:

    System > library > Caches > com.apple.kext.caches > start

    The items in the folder top level system are protected.

    Do not attempt to directly remove or change anything in the system of higher level folder.

    If you delete these files, your Mac is likely to ever be reactivated.

    If you want to regenerate starting kext caches, restart your computer in safe mode (your username and password will be required), and then restart in normal Mode and caches will be rebuilt at the time (your startup will take a little longer because of this).

  • WHY MY MAC at the BEGINNING of 2009 PRO 2.66 GHz Quad - Core Intel Xeon will NOT IMPROVE in SIERRA

    WHY MY MAC at the BEGINNING of 2009 PRO 2.66 GHz Quad - Core Intel Xeon will NOT IMPROVE in SIERRA

    Your signature says you're running snow leopard 10.6.4. If this is the case you must update to 10.6.8 in order to get the Mac App Store:

    Mac OS X 10.6.8 Combo Update v1.1

    You will need to upgrade to El Capitan until you can upgrade to Sierra:

    https://iTunes.Apple.com/app/OS-x-El-Capitan/id1147835434?MT=12

  • Install Snow Leopard on iMac 2.8 GHz Quad Core i5

    I just bought a refurbished 21.5 in iMac 2.8 GHz Quad Core Intel Core i5 on the Apple Store to replace an aging 21.5 in iMac 3.06 GHz Intel Core i3. The new iMac has 10 El Capitan 10.11.6 OS and the old iMac OS Snow Leopard 10.6.8.

    I have old versions of Quark Xpress, Photoshop, Illustrator and Filemaker Pro on the old iMac running SL and I want to continue to use these. I am now retired and can no longer pay to upgrade.

    I partitioned the HD on the new iMac and had hope install SL and migrate all my old files from the old computer. I tried to recover from a Time Machine backup since the iMac old and installation of the system from a bootable USB stick SL. None of them has allowed me to move forward.

    Has anyone else tried this and succeeded? Will I have to completely erase the HD in the new computer, partition the drive, install SL on a partition and, on the other?

    I've seen similar issues but no response to my problem. Real help would be appreciated.

    Your mac is not designed to work in 10.6 and the operating system will prevent installation of 10.6 using the API. While this is possible through virtualization, but you will be using a 3rd party solution to do something your mac was not intended to do and any instability could be traced back to this.

    Use the version of Mac OS X included with your Mac, or a more recent compatible version - Apple Support

  • Are there any available for the Mac Pro 2013 SSD expansion?

    Are there any available for the Mac Pro 2013 SSD expansion?

    I would like to increase my 1 or 2 GB of storage internal if possible.

    https://eShop.MacSales.com/shop/SSD/OWC/Mac-Pro/2013

  • Mac pro 2013 is better than 2015

    Mac pro 2013 is better than 2015

    There's not been and of differences in the Mac pro was introduced in late 2013.

    Generally, because of the availability of parts, a newer version will be probably different parts on 2013 old Mac Pro

  • My Mac Pro 2013 will sleep is no longer

    A month or there is my Mac Pro 2013 is no longer sleeps, even if I try to sleep it manually. I have enabled and changed the setting of Sleep/Power Nap in energy-saving.

    I looked at the article Apple and that did not help. I have reset the SMC and booted without failure. I haven't changed any connected equipment or internal. The console log does not help me, but here's the most recent when I sleep manually it. I have bolded the line that started the sleep/low power mode and the line where it was released

    20/05/16 2:00:42.429 PM CommCenter [435]: CSI telling to go to low power.

    20/05/16 2:00:42.429 PM AirPlayUIAgent [588]: 2016-05-20 02:00:42.428658 PM [AirPlayUIAgent] BecomingInactive: NSWorkspaceWillSleepNotification

    20/05/16 com.apple.cts [430 2:00:42.431 PM]: com.apple.suggestions.harvest: scheduler_evaluate_activity told me to run this job. However, but the start is no time for 33136 seconds.  Ignorant.

    20/05/16 com.apple.cts [430 2:00:42.431 PM]: com.apple.icloud.fmfd.heartbeat: scheduler_evaluate_activity told me to run this job. However, but the start is no time for 468717 seconds.  Ignorant.

    20/05/16 2:00:42.435 PM sharingd [469]: 14:00:42.435: scan BTLE turned off

    20/05/16 2:00:42.435 PM sharingd [469]: 14:00:42.435: scan BTLE turned off

    20/05/16 2:00:42.567 PM identityservicesd [442]: IMMacNotificationCenterManager: 0x7ff29b548b80 >: Observer of notification: notification com.apple.iChat: __CFNotification 0x7ff29d120e10 {name = _NSDoNotDisturbEnabledNotification}

    20/05/16 2:00:42.567 PM image [497]: IMMacNotificationCenterManager: 0x7ff2339135f0 >: Observer of notification: notification com.apple.FaceTime: __CFNotification 0x7ff2327077c0 {name = _NSDoNotDisturbEnabledNotification}

    20/05/16 2:00:42.588 PM identityservicesd [442]: IMMacNotificationCenterManager: 0x7ff29b548b80 >: NC disabled: NO

    20/05/16 2:00:42.588 PM image [497]: IMMacNotificationCenterManager: 0x7ff2339135f0 >: NC disabled: NO

    20/05/16 2:00:42.588 PM sharingd [469]: 14:00:42.588: purged hashes contact

    20/05/16 2:00:42.589 PM sharingd [469]: 14:00:42.588: discoverable mode changed to Off

    20/05/16 2:00:42.589 PM sharingd [469]: 14:00:42.588: Scan stopped BTLE

    20/05/16 2:00:42.598 PM WindowServer [180]: device_generate_desktop_screenshot: authw 0x7ff54a014c00 (2000), shield 0x7ff54d055c00 (2001)

    20/05/16 2:00:42.598 PM WindowServer [180]: device_generate_lock_screen_screenshot: authw 0x7ff54a014c00 (2000) [0, 0, 0, 0] shield 0x7ff54d055c00 (2001), dev [1920,1080]

    20/05/16 2:00:42.598 PM WindowServer [180]: no sleep for WillPowerOffWithImages image

    20/05/16 2:00:42.599 PM WindowServer [180]: device_generate_desktop_screenshot: authw 0x7ff54a014c00 (2000), shield 0x7ff54d055c00 (2001)

    20/05/16 2:00:42.599 PM WindowServer [180]: no sleep for WillPowerOffWithImages image

    20/05/16 2:00:42.602 PM image [497]: IMMacNotificationCenterManager: 0x7ff2339135f0 >: DND enabled: YES

    20/05/16 2:00:42.602 PM identityservicesd [442]: IMMacNotificationCenterManager: 0x7ff29b548b80 >: DND enabled: YES

    20/05/16 2:00:42.602 PM image [497]: IMMacNotificationCenterManager: 0x7ff2339135f0 >: update enabled: No. (subjects: ())

    ))

    20/05/16 2:00:42.602 PM identityservicesd [442]: IMMacNotificationCenterManager: 0x7ff29b548b80 >: update enabled: No. (subjects: ())

    ))

    20/05/16 2:00:48.000 PM kernel [0]: IOUSBHostHIDDevice@00223000,0 074948.944989: IOUSBHostHIDDevice::interruptRetry: resetting the device due to failures of IO

    20/05/16 2:00:48.000 PM kernel [0]: USB device 0BDA030700640000 - fConsecutiveResetCount = 1.

    20/05/16 2:00:48.000 PM kernel [0]: USB device 0BDA030700640000 - PortLogging (Disable) = kIOReturnNotReady.

    20/05/16 2:00:49.000 PM kernel [0]: en2: BSSID changed to 48:f8:b3: this: e7:3 c

    20/05/16 2:00:49.000 PM kernel [0]: en2: channel changed to 161,80

    20/05/16 2:00:49.000 PM kernel [0]: IO80211AWDLPeerManager::setAwdlOperatingMode setting the AWDL SUSPENDED auto operating mode

    20/05/16 2:00:49.000 PM kernel [0]: IO80211AWDLPeerManager::setAwdlSuspendedMode() suspension AWDL, enterQuietMode (true)

    20/05/16 2:00:49.000 PM kernel [0]: Airport: RSN full on en2 handshake

    20/05/16 2:00:49.000 PM kernel [0]: IO80211AWDLPeerManager::setAwdlOperatingMode setting the AWDL of SUSPENSION auto operating mode

    20/05/16 2:00:49.000 PM kernel [0]: IO80211AWDLPeerManager::setAwdlAutoMode AWDL recovery

    20/05/16 2:00:49.000 PM kernel [0]: ARPT: 74949.082534: wl0: roamed or channel switching, #0, bssid 48:f8:b3 reason: this: e7:3 c, last RSSI-65

    20/05/16 2:00:49.000 PM kernel [0]: en2: BSSID changed to 48:f8:b3: this: e7:3 c

    20/05/16 2:00:49.000 PM kernel [0]: en2: channel changed to 161,80

    20/05/16 2:00:49.000 PM kernel [0]: changed en2::IO80211Interface:postMessage bssid

    20/05/16 2:00:49.000 PM kernel [0]: AppleUSB20Hub@00220000 074949.251405: AppleUSBHub::deviceRequest: reset because of persistent errors

    20/05/16 2:00:49.221 PM Google Chrome [443]: [14:00:49.221] < < < < AVCaptureHALDevice > > > >-[AVCaptureHALDevice _removePropertyListeners]: removing an observer living device < AVCaptureHALDevice: 0x7fc08348d880 [Yeti Stereo Microphone] [AppleUSBAudioEngine:Blue Microphones: Yeti stereo Microphone: 210000:2, 1] > has failed (560947818)

    20/05/16 2:00:49.221 PM Google Chrome [443]: [14:00:49.221] < < < < AVCaptureHALDevice > > > >-[AVCaptureHALDevice _removePropertyListeners]: removing observer device format < AVCaptureHALDevice: 0x7fc08348d880 [Yeti Stereo Microphone] [AppleUSBAudioEngine:Blue Microphones: Yeti stereo Microphone: 210000:2, 1] > has failed (560947818)

    20/05/16 2:00:49.221 PM Google Chrome [443]: [14:00:49.221] < < < < AVCaptureHALDevice > > > >-[AVCaptureHALDevice _removePropertyListeners]: remove observer data source for device < AVCaptureHALDevice: 0x7fc08348d880 [Yeti Stereo Microphone] [AppleUSBAudioEngine:Blue Microphones: Yeti stereo Microphone: 210000:2, 1] > has failed (560947818)

    20/05/16 2:00:49.221 PM Google Chrome [443]: [14:00:49.221] < < < < AVCaptureHALDevice > > > >-[AVCaptureHALDevice _removePropertyListeners]: removal of observer source of the device data < AVCaptureHALDevice: 0x7fc08348d880 [Yeti Stereo Microphone] [AppleUSBAudioEngine:Blue Microphones: Yeti stereo Microphone: 210000:2, 1] > has failed (560947818)

    20/05/16 2:00:52.429 PM loginwindow [102]: CoreAnimation: attention, removed the wire with CATransaction uncommitted; Set CA_DEBUG_TRANSACTIONS = 1 in the environment connect backtrace.

    20/05/16 2:00:52.479 PM loginwindow [102]: CoreAnimation: attention, removed the wire with CATransaction uncommitted; Set CA_DEBUG_TRANSACTIONS = 1 in the environment connect backtrace.

    20/05/16 2:01:10.304 PM CommCenter [435]: CSI by saying to the low power output.

    20/05/16 2:01:10.308 PM loginwindow [102]: ERROR | -[LWBuiltInScreenLockAuthLion closeAuthAndReset:] | Attempted to remove an observer by observing

    Hello..

    Sorry to hear that your Mac Pro is upward...

    If you have not yet tried, Reset NVRAM on your Mac.

  • Y at - it a clear indicator or a code to indicate if a stick of RAM is registered or unbuffered? I would like to know for sure before installing additional RAM for this Mac Pro (2013). Thank you in advance. David

    Hello, all:

    Y at - it a clear indicator or a code to indicate if a stick of RAM is registered or unbuffered? I would like to know for sure before I add that extra RAM for the empty slots this Mac Pro (2013) that a 2 x 8 is installed.

    Thank you in advance.

    Appleharvest

    Post edited by: AppleHarvest (typo corrected)

    The 4 and 8 GB sticks are not saved while the sticks of 16 and 32 GB are registered. As you seem to know, you can not mix registered and unregistered sticks. For example, you can only add 4 or 8 GB sticks to your present 8 GB sticks

  • Samsung U28d590 + Mac Pro 2013

    Hello world.

    I have a Mac Pro 2013 AMD over-pants D300 2048 graphics card.

    I use a Samsung 4 k U28D590 connected via DisplayPort / Thunderbolt, to change 4 k video.

    The display works fine but if I use the maximum resolution (3840 x 2160) all the icons and text looks too small and it is impossible to work.

    I think that, if the Retina displays resolutions higher than my Samsung and icons and the text are a good size for the job, why OS X is not make the same options for scaling using a third party appear? Especially when Apple does not have an external display in 4 k for Mac Pro...

    Does anyone have the same problem?

    Thank you and sorry for my bad English.

    Yes, it is a common problem with the exception of the high-resolution iMac. For those, which Apple also provides the screen, that they have increase the icons and other elements of the OSX system so they ae readable ore.

    Make a suggestion to Apple to implement than for non-Apple screens

    http://www.Apple.com/feedback/MacOSX.html

  • with 10.11.2, Mac Pro 2013 wakes up not 4 k shows up after sleep as before.

    I installed 10.11.2 today and found that the Mac Pro wakes up not 4 screens connected to the thunderbolt ports k. I tried many kinds of 4 k screens, including u28e590d, u24e590d, p2716q etc., but none of them is waking up after sleep. the only resolution is to disconnect and reconnect the thunderbolt (view port) cable a thunderbolt different port.

    these screens all work perfectly with 10.11 and 10.11.1.

    Steps to reproduce:

    1: having a Mac Pro 2013, configurations and install 10.11.2

    2: Connect a screen 4 k as u28e590d to the thunderbolt port, using mini-displayport cable.

    3: let the Mac Pro sleep

    4: when press a key or click the mouse, the Mac Pro will wake up but the screen won't wake up 4 k.

    everyone knows the same problem?

    Hello.

    same problems here :-(

    MacPro 2013 with the D300

    4 k screens: 28e590d Samsung and Asus PA328Q.

    Can someone help? This problem is very annoying!

    Andi, of the Germany.

  • Can I upgrade my laptop cq56 Pisario Compact a 2.6 Ghz quad core with 4 GB of ram

    Hi Hp community.

    I am tring to get a new model on my computer called nolimits coaster 2 software. I had the demo and it runs pretty slow. I don't know if it's a memory or a CPU thing but I would love to get this without having to buy a computer brand new if possible. Here are their requirements: Windows 7 or newer, 2.6 GHz Quad Core with 4 GB of RAM, compatible Direct x 9.0 c (Shader Model 3) with 1 GB of video RAM

    Thank you, Michael

    Hello

    The following link shows the specifications of your computer:

    http://support.HP.com/us-en/document/c02636087

    As you can see, no way you can upgrade your machine for video 1 GB of RAM you given cannot go to 2.6 GHz CPU (maybe not image) and 4 GB of RAM. You buy the new machine to meet the requirements.

    Kind regards.

  • Is temp CPU to 131-140 iron an AMD Athlon II X 4 620 2.6 GHz Quad - Core Processor normal or high?

    I have just instlalled an AMD Athlon II X 4 620 2.6 GHz Quad - Core (ADX620WFK42GI) instead of my 2 215 dual core athlon processor and my temporary hoovers around iron 131-140. is this normal operating temp?   Cause now my CPU fan turns up every 5 minutes for about 5 min and it never ran full front

    As tetraethyle3 says, if you use the one provided with the dual core cpu, it can
    be insufficient. Dual-core coolers are similar, but not the same thing.
    However, you may have gotten the paste application heat badly too.
    There are tutorials of application of thermal paste on the i-net.

    Try a Coolermaster EVO Hyper 212.
    They are well regarded as a good value for the effective cooler money. You have to
    remove the motherboard to mount, unless you have a case with a hole in the motherboard tray to allow replacement of cooler.

    All three AMD I've used for the Athlon 64 came out slowed in the bass
    40 c in summer, but my Phenom 965 now stands at 35 ° C (temperature of 22 c air).
    In the summer with temperatures of air between 28-32 + C it will hit 60-65 ° C under full load.
    The stock AMD cooler also kept the 965 at similar times, but unlike my previous
    AMD coolers the fan was loud, so I installed a Noctua U9 with fan only.

    .

  • Mercury Playback Engine option in first Pro CS6 GPU acceleration not on the new Mac Pro Tower 6 - Core Intel Xeon E5 AMD over-pants D700?

    Mercury Playback Engine option in first Pro CS6 GPU acceleration not on the new Mac Pro Tower 6 - Core Intel Xeon E5 AMD over-pants D700?

    How can I get the Prime Minister to allow me to use the GPU of Mercury Playback Engine acceleration option?

    WilsonMark wrote:

    This applies to the new Mac Pro w / D700 cards?  If so, can you please explain how to change the settings.

    I have CS6 installed longer, so I don't remember the exact tree that he uses.  There are 2 text files, that you need to remove.  We're in the Premiere Pro installation directory, and the other is in the Adobe Media Encoder, a.  You locate the file called opencl_supported.txt.  You can find this file in the installation directories.  Delete both.  PR of restart and you should be able to choose OpenCL as the hardware renderer.

  • G5 Dual-Core Intel Xeon 2.66 performer 10.6.8 can I upgrade the Mavericks

    I am the owner and working on a Mac G5 Dual-Core Intel Xeon 2.66 GHz running 10.6.8 can I upgrade the Mavericks?

    You need to get your story straight before we can help you.

    There is no such thing as a Mac G5 Intel Xeon.

    It's a Mac G5 which has a PowerPC processor or it's a Mac with an Intel Xeon.

  • Ask for help upgrade (Mac Pro early 2009 2x2.6 GHz Quad-Core)

    I am a videographer who has need to bring my Mac Pro from the dead. Cheesy with video files, but not parts of. My reading so far led me to look at in what follows. I'm looking for a better understanding of each of the following items and upgrades are beneficial and worth that may be too kill for a round of aging.

    1. Memory. I currently have 4x2gb or total of 8 GB of ram. I know this is ridiculous, I have not increased by at least 16 GB so far. However, I have read that memory can only help so much and that some of the items here are actual speed thrusters. How much memory is recommended for this configuration? Should I buy? http://www.Amazon.com/16GB-DDR3-1066-PC3-8500-1066Mhz-Apple/DP/B0098MLFJG/
    2. Solid State Drives. I currently have 3 disks internal thatrange of 500 GB to 2 TB. If I used that as my boot drive, where is the best place to install (see photo below)? I read of people installing in a Bay SATA HDD or SATA optical drive unused. I read good things about it. http://www.Amazon.com/Samsung-2-5-I...p/B00OBRE5UE/ref=cm_cr_pr_product_top?IE=U TF8
    3. Video/graphics card. First of all, both mean the same thing? Are the belowonly of slots PCI Express 4 for this type of card? Also, can you have two installed? I have the NVIDIA GeForce GT 120 512 MB series. What is the best way to upgrade? My research so far has led me to the GeForce GTX680. Looks like I'll have to buy it was good. T7ZS http://www.Amazon.com/EVGA-GeForce-DisplayPort-Graphics-02G-P4-3682-KR/DP/B00C81
    4. Processor upgrade. I'm intimidated by it due to intensive installation and prices. What would be the next best bet - upgrade to 12-core? Where to buy?
    5. Firmware? I've seen videos and forums on (4.1 - I) (5.1) or (6.1). I don't really understand what that means. Should I be concerned?

    Thank you!

    -The fastest drive is a blade of base PCle SSD. Very very fast

    The SSD to 'Classic' Mac Pro training

    -The bus SATA on the Mac Pro is only SATA II (3 GB/s) and connected to the bus SAT SSD is therefore limited to speed SATA II, not the speed of current SATA III (6 Gbps) drives.

    -You can get cards PCle who accept the standard SATA SSD and who can get speeds of SATA III

    -You can install several graphics cards. I have my 2009 MP, I have the original GT120 in slot 2 and a 5770 PC card into slot 1 (slot width double only).

    A graphics for PC cards will not display anything while booting, as well as an installed PC card can be used for the Startup Option or special start-up as recovery mode.

    For more information on graphics cards:

    Tip: Mac cards replacement Graphics Pro money Tour (2006-2012)

    http://www.macvidcards.com/index.html

    http://forums.MacRumors.com/showthread.php?t=1440150

    -J' would upgrade not processors. Frequently reading and writing to disk is the bottleneck.

    About the firmware, you can update the firmware of the 2009 to 2010 MP. Which allows the use of faster memory, using a processor six cores and audio mini displayport for the graphics card offline

Maybe you are looking for