Similar Questions

• Adobe Acrobat 9 Pro on my Apple Mac Pro and MacBook Pro from Apple

  I think I found the answer to my question: "if I can install my copy of Adobe Acrobat 9 Pro on my Apple Mac Pro and my Apple MacBook Pro bought recently?" I think that my question has been answered by reading the text of the Convention for the use of this site in the following text:

  "You can activate the software on up to 2 devices (or virtual machines) at the same time, if these activations are associated with the same Adobe ID for the same person, except to . http://www.Adobe.com/go/activation_fr . However, you cannot use the software on these devices simultaneously. »

  If this is correct, you could confirm. I know what security conscious Adobe with their software.

  Thank you! Be safe!

  Ken

  Hi kennethf71183385,

  Thanks a lot for the asking! Yes, you are right to activate your copy of Acrobat on two computers. For more information on activating Adobe software, see Activation & deactivation Help - Support Adobe !

  Please let us know if you have any additional questions.

  Best,

  Sara

• My macpro is backup in the capsule of time even when I was at work, which means that the time capsule is consumed my data plan. Can anyone suggest a way I can have it the backup only when my mac pro and time capsule is in the same local wifi

  my mac pro is backup in the capsule of time even when I was at work, which means that the time capsule is consumed my data plan. Can anyone suggest a way I can have it the backup only when my mac pro and time capsule is in the same local wifi

  If the Time Capsule and MacBook Pros are not on the same network, the MacBook is not backup in the time Capsule. You probably see what snapshots leaving MacBook on the local disk, until the two are reconnected. If you don't want that to happen, disable Time Machine on a different network.

  Good day.

• My lil brother has used a fake iphone charger to charge his Iphone on my mac pro and my laptop down, someone had something similar happen? Help

  My lil brother has used a fake iphone charger to charge his Iphone on my mac pro and my cell phone shot someone had something similar happen? Help

  Try http://www.makeuseof.com/tag/reset-macs-smc-pram/

• CS5 for mac is installed on an old mac.  I have a new Mac Pro and iMac, that I want to install.  I can do this, and if not what is my best option.  I mainly use Photoshop later.  Thank you!

  I have a new Mac Pro and iMac, I want to install CS5 on them.  I can do this, and if not what is my best option.  I mainly use Photoshop later.  Thank you!

  Personally, I would install just without turning off. Worst thing that will l be happen you will need to disable a. Does not mean that you must uninstall just disable and when you need it, just disable one of the other and activate the current. But I assume CS5 because he is not yet supported most probably don't even follow the activations. I'm guessing the last part but when trying to install and activate without disabling one will not harm what anyone,.

• I use the plan of the photograph of my macbook, I bought mac pro and download photoshop but this is the trial version

  I use the plan of the photograph of my macbook, I bought mac pro and download photoshop but this is the trial version

  First try you out and back creative cloud: log in and log out of the desktop Adobe Creative Cloud application

  If this does not help, you can go on Adobe.com and connection, select Manage my account, then pick plans and products.

  You should be able to see the plan, that you subscribe to here if the order/payment form is completed.

  Please note that it may take 2-3 days to process an order, excluding weekends, so this does not yet appear, continue to use the trial until the payment goes through.

  If the plan arises but you're still to see trial, please see this link:

  Creative Cloud applications unexpectedly back in the test mode. CS6, CCM

  Please let us know if that helps.

  Guinot

• Mac Pro: more RAM or better video card for video editing?

  I'm going to buy a new Mac Pro for video editing in first Pro CC, but can't decide if I should ad more cores, more RAM or a better graphics card.

  Intend to change the RED 4 K files.

  Hello

  I'm certinaly not an engineer who can comment on how applications are written and how can hearts of processor they can write effectly, but there has been a lot of comments to the Mac Pro (new), and to answer your question, based on what I read, there were comments that the 8 basic model is good for video editing - not too , nor too little.

  Being an editor, I'd always put my money to get the best graphics cards and the largest amount of RAM that you can afford.  For work, we've been specing on new models and it was the 'formula' we follow.  With the exception of the RAM, sounds like once you buy, your clerks to the material with the new machines.

  I found the review below to be a great resource that can help answer your question.

  AnandTech | The Mac Pro Review (end 2013)

  Hope that helps and good luck with your purchase.

• Direct networking Mac Pros, and via a switch setting

  I have a Mac Pro from previous gen and will migrate to a 2013. I'll keep one older goes for FCP7 concerts that come to life.

  So for the migration and the initial period of work the bugs out ("Dang?', where is the After effects plugin "AW, forget a font! "Where this stupid buy code?") I'll need to have network; I also need to buy a bunch of attachments for spinning-disk RAID, SSD, optical drive, etc. There will be a period I will access pictures and things of the old system while working on another.

  So my question: the old Pro is connected to a switch and several macs are networked throughout my space. There is an additional port close to my office so I can network the pro - but it it possible/fast/sought somehow to have old mac plugged into the switch and plug the other into the free Ethernet port on the old, because they will be sitting side by side (Yes, my office will be a mess for awhile).

  Basically, I was wondering if a direct connection between two Mac will be faster file transfers and allow a new access to the internet.

  (I know how to add the new for the network, but still she wondered why there are two ports on Mac high range). Thanks for any thoughts.

  for near-Hard Drive performance, you need a Gigabit Ethernet switch. If you do not, you must get a. It's the only acceptable way to manage the transfer of files from local computer.

  Your router has no need to gigabit speeds, because your Internet connection is not likely to be faster than 100M bps. The "trick" (if it exists) is that the computer transfers to use Ethernet wiring, but they do not use the routing on the router, only direct data transfer function (switch functions ""), if a cable like that. "

  There is no simple way to get faster speeds, like plug it into a computer by cable-computer.

  The second Ethernet port is good for storage area network connecting, as a NAS.

• Mac Pro and Pro first: CUDA Will help me?

  Hey people.

  I am a complete and utter novice regarding the technology offered by Adobe with respect to video editing.  I'm not a pro by any stretch, I just sort of found that my editing of video and wants needs are not met by the video software 'House '.  I have so far using Apple Final Cut Express to do my job, but I'm looking to move to 64-bit edition so that I can better use the RAM in my Mac Pro.  I tried to make Final Cut Pro X works for me, but there were some features I used in FCE are not available in the Pro version.

  Made me try the Premier Pro.  I play with the trial for 30 days now, and I like what I see.  "It's a little expensive, but I can eat without problem.  I have a question: for what little I do, CUDA will actually help?  My workflow goes something like this:

  1. Import AVCHD from my Sony camera
  2. Import a file from my portable recorder WAV
  3. Merge/sync audio and video up to
  4. The foreign cut off the beginning and end of the video
  5. Exporting to h.264/MP4

  I do that 4 times after a run monitoring session (in car video track).  Anything that would prevent me from working bugs the snot out of me.  It seems if I order correctly work with Premier Pro, I can stop the software to render anything until it is actually a time for export.  And given that the body comes with the media conversion software that takes care of the export, lines to the top of my video existing while I start working on the next is perfectly feasible.

  I like it.

  Now... with this list above, CUDA will help at all?  I see that with the Mac Pro, the only card nVidia (reasonable price) supported is the older GTX285.  I can always find those on EBay, but... is it worth it?

  Thoughts?  Thank you!

  JAS

  It's not like you're going to do anything that will benefit treatment CUDA.

• new mac pro and adobe software

  Hey guys, make this mac pro. Just a few quick questions. This system with these specs would be good if I'm doing a lot of work with adobe after effects and first pro please? All users out there with a similar system and experience using this software please?

  Thank you very much.

  Adobe apps don't support not the Mac Pro/AMD GPU of DX00 2013 that well.

  http://macperformanceguide.com/index_topics.html#MacPro2013

• Mac Pro 2008 RAM Upgrade

  Hello

  My Early 2008 Mac Pro (3,1) currently has 6 GB of RAM (two 1 GB sticks) and two sticks of 2 GB and I bought a pair of used ram (800 MHz DDR2, who works with the Mac Pro 2008 according to the announcement on Ebay) to take up to 8 GB. I have a Kingston 2 GB key and a broken stick of the same type to complete the configuration. I followed the instructions on the Apple support page and inserted the two sticks of working and broken in the memory card top of the page, and when I turned on the machine, it is detected that the map background (which had the pair of 2GB that was already in the machine) about this Mac. After the reinstallation of the new RAM, the fans in the machine began to turn to the maximum, and the machine hung on the Apple logo. I tried a few different configurations (including the replacement of one of the existing 2 GB sticks with the new work), which caused the machine hang or the memory card, they were to not be detected. I have now deleted the new RAM temporarily, and the machine works fine.

  Any suggestions as to why this is happening? I'm under El Capitan 10.11.4.

  installing new RAM check the smaller units of new RAM by itself, has increased the confidence that we CAN work, prior to mixing and matching with your RAM existing. This reduces the problem to the size.

• Mac Pro vs maxed on basic MacBook

  Let's start with the fist, do not answer on the portability! Ian is not going to base my decision on portability. I will use it for, iTunes, internet, office and a few other programs, (without video editing or whatever it is expensive). So my question is, I'll be disappointed with the MacBook, because I run 4-5 programs at a time, and I can pay either a 2.8 ghz MBP or a quad core Mac pro (I don't want an Imac). Once again please don't base your opinion on the MB is portable (it's nice, but not so much for me to sacrifice the power). Thank you

  An argument for a Mac Pro is located on iFixit.com.  Systems of the retina are valued at 1/10 for reparability.  MacPro gets 8/10 (https://www.ifixit.com/Device/Mac_Pro_Late_2013) meaning that you can replace more and much more easily.

• My Mac Pro and HP Deskjet 3070 PowerBook does not connect via a wireless network from dorm

  Both my laptop and printer (an all-in-one) are connected to the same wireless network dorm, but they do not connect on it.  They connect only wire using a USB cable.

  I have for the MacBook Pro and the Deskjet printer IP addresses but no way to use to establish a connection.  I don't have access to the network router.  When I test the connectivity, the software tells me, "too many networks."  He can't make a choice!

  Interestingly, I have my MacBook Air along this journey, too, and the two MacBook have no problem of communication on the same network of dorm.

  Is it possible to plug these devices such as computers connect or should I remain attached to the USB cable to use my new printer?  I guess you know how I feel about this.  Thanks for your advice.

  You are right.  There is no way to bypass security protected by password and thus to connect a Mac to a Deskjet 3070 via a secure network without access to a router, and a password.  However, even without access to a network or a router, there is a workaround solution.  In my case, where the technical ability to correctly configure the router and the printer is beyond the understanding of the management of the dormitory, qualified through the difference to happen anytime soon, it is the answer I need.

  The solution is to build your own Mac + network printer and make it private, protect it against unwanted entry.  This offer you little mobility in the area of the printer, which is much better than nothing.  A sofa can be more conducive to creative thinking as an Office Chair.  The unconventional twist that Johnny introduced the user, the printer that generates the sender-recipient, not the Mac network.  Very smart.

  I refer you to the thread,

  "Deskjet 3070 cannot connect to the ad - hoc network (Mac)"

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/DeskJet-3070A-cant-connect-to-ad-hoc-network/m-p/1446819#M38598

  Then the only question is to know how to connect your Mac on the Deskjet 3070 printer via the generic (as he calls it, "ad hoc") network created by the Deskjet printer.  The Mac has abundant features for this purpose.

  Thanks for the categorical assertion, however.  No sense to break down the walls looking for a nonexistent hidden tunnel...!

• Mac Pro and living with storage Thunderbolt

  Yes I m thinking of diving and the purchase of the Mac Pro with 256 or 512 GB SSD. So what I wonder about is what kind of external storage Thunderbolt to buy and how performance is with love at first sight when you work with large image (1-2 GB. tif´s) files. The internal memory won't be enough with 256 / 512GB SDD and the 1 TB i dear for me. So I'd rather have an external storage to store the images and also do the real work.

  The computer I m using right now is a Macbook Pro 2011 with a 256 GB OSX disc and 1 to mechanical (swapped the optical drive).

  Backstory: I m photographer and Retoucher. Blabla. Need a new computer. And so on.

  See the

  THUNDERBOLT DEVICES

• MAC PRO and Geforce GTX 980 ti

  I just bought a ti GTX 980 (only not flashed to mac). My MAC PRO 2010 IN Yosemite 10.10.5 system is supposed to have the latest drivers from quadro 4000 and k5000 as web base drivers where my new ti 980 should work, but the only response from switching on the computer is a black screen. I don't know what I have to do to get into the system or activate the drivers. I don't like to see the logo of apple or bootcam. I want to just use it with mac.

  My card is GIGABYTE 980 ti

  Help please

  Thank you!!

  Please read all THE information on all the links. You NEED to install drivers for this card.

  
  

  From:

  http://www.macvidcards.com/store/P49/Nvidia_GTX_980_Ti_6_GB.html