Mac pro black with cursor only screen

Similar Questions

• My Mac Pro 2009 gives me only a power button blinks when I try to turn it on.

  My Mac Pro 2009 gives me only a power button blinks when I try to turn it on. External drives turns on but not the computer or monitor. I tried holding down the power button to restart but I still get only a power button blinking and no departures. It is running IOS 10.8.5 and I use it mainly for recording and mixing of music. I use Digital Performer and, sometimes, ProTools. Nothing new has been installed recently.

  fans on, power button flashing says "not enough RAM that works correctly for starting up".

• Hi all, I have a new core of mac pro 12 with 64 GB of ram and two AMD over-pants D700 6144 MB

  Hi all, I have a new kernel of mac pro 12 with 64 GB of ram and two AMD over-pants D700 6144 MB, is it possible that with the new cc photoshop mac pro is less faster than the macbook pro retina? I can't believe that the patch is so slow, tha majority of the filter go slower than my macbook pro.

  I have need help to understand why and if there will be soon new photoshop upgrade for the Mac pro 2013.

  Thanks Marco

  All right, you're a Mac user and cannot bother to do what people ask.  I hope that Adobe solves your problem for you.

  -Christmas

• Mac Pro black screen and the cursor on startup

  My Mac Pro won't start. He begins the start but stalls on a black screen.  None of the fixes recommended work (I tried them all THE). As I finally understood, it's el Capitan does not like more than one monitor (I have three). When I unplug the two monitors, it starts fine. Yosemite has worked well with three screens, ElCapitan started very well that if I unplugged one of you watching her. The latest version requires me to unplug both monitors so that it can start up.

  What specific Mac Pro?

  What specific graphics cards are installed?

  Are these Mac-Flash cards? They need additional drivers?

  How the monitors are connected?

• iMac 27 "with the second monitor boots black with cursor

  I can't seem to find another discussion altogether as my problem starting special 'black screen ':

  New iMac 27 "retina 5K (end of 2015) running OS X El Capitan 10.11.3 with second monitor Samsung connected by Mini DP - DVI.  When starting, the two screens are displayed in black, but the cursor is available and can be moved.

  I have to make a hard stop and disconnect the second monitor to start at the login screen. Then I can reconnect the monitor and everything works.

  Any suggestions for a fix?

  So, I spent some time with Apple customer support. Several of the standard troubleshooting for problems of mystery, they came to the conclusion that there was an incompatibility of driver with the Samsung monitor at startup which is mucking things up, and I just have to accept starting with the second disconnected monitor then plug it in again after a successful login.

  Samsung does not write the monitor for Mac drivers (for some reason any), that's why the customer support figures that there is a hangup at startup. But why OS X recognize the monitor and run fine otherwise? Why only hang at boot time? And why my Mac Book Pro 2007 running the same version of El Capitan boot fine with the connected monitor? It has something to do with the Thunderbolt/mini-DP-to-DVI connection? I don't know, and I guess that Apple's Support is not either.

  I fell on a hack, which is as follows:

  1. start with the second monitor connected

  2. in the "black screen with cursor" hold the power button quite long to put the computer to sleep

  3 wake up the computer with the keyboard or trackpad or other

  4 and now the login screen will appear.

  5 log in as usual.

  6.

  I hope this helps someone. One day I'll get a more compatible monitor and it will not be a Samsung.

  They make nice dish, however.

• Installation of Win 7 Pro 64-bit on Mac Pro (Intel) with Boot Camp

  Trying to install OEM Windows 7 Pro 64 bit on a Mac Pro (Intel based computer) using Boot Camp (with Apple OS X 10.6). The installation went well until the system reboots to the CD with the OEM Windows 7 drive in the Bay. At that time there a MS-DOS appears on the screen that looks like this:

  1.

  2.
  Select the Startup Type of the CD-ROM:

  There is a blinking cursor (line underscore) after the semicolon, but everything I type on the keyboard appears on the screen when the cursor blinks. I use a USB keyboard connected to the computer for the installation, so I know it works. This blocked me.

  Is it possible that the OEM version is causing this problem? Can I use a regular full version of Windows 7? Do not spend money to buy, then discover it displays the same screen.

  I'll check with both Apple Support, but it seems strange that everything went very well with the installation until the Windows 7 loaded into the Bay. Any suggestions are appreciated.

  Are you sure you are using the right drive?

  The OEM versions include a disc OPK and the Windows 7 installation disc, make sure you use the right one.

  Also, insert the disc, press C on your keyboard and select the Windows 7 disc to boot from it.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• CC 2014 Illustrator EXTREMELY slow race on nine Core Mac Pro 6 with Ram 64Gbs. It's not right :(

  Hello

  I just picked up a new kernel 6 Mac Pro and I'm having some serious lag with Illustrator CC 2014 issues. I'm just trying to select relatively simple objects (an illustration on the side of a coin) and there is a huge delay between when I click on an object and when it is actually selected.

  Someone please tell me they know how to fix it? Please

  My company recently "upgraded" my OS to Windows 8.1. (an operating system prior to Windows 8) and I am now terrible performance when you use Illustrator CC 2014. (2014.1.0 release - 18.1.0 (64 bit)). More problematic is that every 5-10 seconds the screen goes black (not answer) for 3 seconds. I had a similar problem with Illustrator CS a year or two ago - I solved this problem by disabling the automatic update of the linked files. So, I'm suspicious that this problem has also something to do with the Illustrator accesses the server, but in this case I don't know which opens access to the server.

  Another colleague of mine using Windows 8 downgraded from "Illustrator CC 2014" to "Illustrator CC" and no longer has the problem of hic - up (unresponsive). "."

• RAM Mac pro 1.1 detects only not all after kernel panic

  Hello

  my mac pro 1.1, 2 x 3.0 Ghz quad core, ram 24 GB os x 1.7.5 just had a kernel panic and stop, after being on for 12 plus hours for most sitting idle. When I restarted the mac pro, now he is grateful only 12 GB of ram on a lift and another elevator shows empty, the DIMMs are installed in mounting a 4gb4gb2gb 2 GB, riser board b = 4gb4gb2gb2gb =, are all matched pairs. all the ram has been installed and functional for the 7-8 months without any problem. This is the first time my mac has never stop from a kernel by itself, panic and he never failed to see half of the ram before, in fact it worked great for quite some time so far. I don't know what is happening and I hope someone can help me get this figured out and find a solution to this problem, thanks in advance.

  Bill

  You have a RAM failure.

  The Mac Pro features help Error correction Code RAM with hardware integrated with its Xeon processor. The Mac Pro 1.1 uses FBDIMM who get hot and do not have a long life expectancy. Work for 7-8 months does not work tomorrow.

  The error correction is used aggressively at the start, and all DIMM found to have errors during the Power-On Self Test brief execution have their slots declared 'empty '. This isn't an anomaly, these modules DIMM turns out to be BAD.

  If these modules DIMM is stickers from the seller, you can get replaced them under warranty of the seller.

  The kernel panic, you met just might be part of the same problem. You can find the report and review it and post it if you want.

  Mac OS X: how to connect to a kernel - Support Apple panic

  RAM problems show themselves as control panic machine, nucleus, often detected by more than one processor at a time.

• Fusion on Mac Pro - dedicate a guest only NETWORK card (and have the OS ignore)

  As the subject says. Such a thing is possible?

  I don't know if I'm looking in all the wrong places, or just to ask the question properly.

  Here's what I was wondering:

  I have a Mac Pro with two network adapters. I want to use one for the host (OS X) and the other only for the guest OS. And using it for the guest OS, I want OS x to ignore it completely.

  If possible, how to apply such a facility?

  1 OS X > system preferences > network > Hardware icon > set order of Service

  • In the Service order worksheet, have the NIC priority placing the card NETWORK to use for the host at the top of the list, followed by the NETWORK card dedicated to the virtual machine, and then click OK.

  2 OS X > System Preferences > network

  • Select the card NETWORK dedicated to the virtual machine, and then to configure IPv4: stop selection, then click on apply.
  • Then to configure IPv4: check the DHCP with manual address.
  • Then for IP address: use a reserved address of 169.254.0.0 to 169.254.255.255 IANA Internet Assigned Numbers Authority () and then click on apply.  It's the range of addresses for the automatic private IP addressing, which normally would be affected if the NETWORK adapter does not have a connection but not to worry, it will be... only for the bridge of VMware which will be defined in the next step.

  3 target Virtual Machine settings > network adapter > Bridged Networking, select the NETWORK adapter chosen for the use of the dedicated virtual computer.

  • Now the Virtual Machine will acquire its network router for the LAN Host Configuration information, or you can assign an address appropriate static IP, mask, subnet, gateway and DNS server IP addresses in the configuration of NIC in the guest OS if you wish.

  Note: If this doesn't work for you, even if as described, it works for me, you may need to manually select to configure IPv4: and use a reserved in the meantime address previously mentioned with a 255.255.0.0 subnet mask while providing the appropriate Host router LAN Gateway and IP addresses of the DNS servers.

  Another problem can occur if using a WiFi NIC dedicated to the virtual machine, some WiFi routers will not fill several IP addresses to the same MAC address.   If this is the case for you, then you will have to use wired Ethernet for NETWORK adapter dedicated to the virtual machine!

• Mac Pro equipped with graphics cards

  (1) Apple certified repair done remarkable work or replacement of these cards, seemed as it did thousands due to schools, universities, colleges had all the problems that I did.

  (2) now did the-d option to initialize the data sent to Apple and have assigned Senior Adviser.

  (3) most recent problem is error codes and system dead slow on my second Mac Pro 6 hearts. Now, does not see my Amd hardware, which is extremely strange to say the least.

  (4) 2 weeks no words or calls returned Senior Advisor, still more serious delays to write make some income with new Mac Pro.

  (5) what did not work is not, the example is iMovie stutters sound.

  (6) final Cut Pro sound of of synk

  (7) k video from my new iPad Pro 4 who made 4 K video sent to dump not recognized on Mac Pro system after that reminder of graphics cards has been made.

  so waiting for words from Apple on the d option played 4 times.

  < published by host >

  Nope... but... all I can do is give you my experience. I got a G5 liquid that had major failure 3 times (was under AppleCare) and has been replaced with a Mac pro. I guess you have tried the usual, killer stuff pram resetting the PMU, trying to reinstall and update the operating system and various applications to this topic and all that, and... nothing. Apple does not read or respond to these forums, cmdrDenis, this place is strictly a user forum, and that's all. Save all your receipts, paperwork, document as much as you can and when you talk to Apple or an adviser, be polite, but pragmatic.  Screaming, yelling, Ranting and raving you will get very far.  If you go to apple.com/feedback and leave a comment there, someone can get back to you. Call the main line from Apple can be useful too, but about what, when and how

  I can't say. Apple * may *, in its sole discretion, replace a machine that has had too many major repairs, or repair, but it's Apple to do.  Maybe if you call your local Apple place, explain the situation calmly and kindly and ask to speak to another senior consultant or Manager, perhaps they can help you.

• Can I start again iMac 5K of Mac Pro 2007 with OS 10.7.5 using target disk Mode?

  I can start an iMac 2015 5K from my old Mac Pro 1.1 (2007, 32-bit) with OS 10.7.5?

  A connection using a firewire connector thunderbolt port will be OK?

  No, you can't.

  (137854)

• How do synchronize you Mac Pro calendar with other devices

  I keep all my calendar events on my Mac Pro.  I like to see this calendar on all my devices. However, the devices either show some events, duplicates or anything.  What should I do to synchronize all the?

  Calendars sync-ing in more complicated than expected.

  To synchronize a calendar, this calendar must be stored in a location that is accessible by Internet. If you have Apple devices, the natural situation is iCloud.

  You must have your sync-able calendar stored in iCloud, then you need grant access to other users on this server, by setting her up (easier on your Mac) so that others have the right to see.

• 2006 mac Pro connected with a fiber patch cable

  I want to connect this cord of fiberto my Mac Pro in 2006, is a PEX1000MMSC would do the job or you recommend something else?

  I don't know why you are asked in the iMac discussion area. I asked the moderators for your message to the Mac Pro chat room.

• Screen black with visible only mouse - SafeMode or normal won't start.

  When I turn on my computer, all I get after the dell screen is a black screen with only the mouse visible. The mouse moves. I ran the diagnostic test Fn/F8 and everything comes back normal. I have the data I prefer not to lose. I tried normal and safe mode and all I get is the black screen.

  Help!

  Hi Arborne,

  Are a. When you facing this problem?

  B. recent changes made on your computer?

  C. do you receive any error when starting?

  I recommend these steps.

  Step 1

  Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  1 boot from theDVD
  2. Select the language
  3. click on "repair your computer" on the install now screen
  4. click Next in the System Recovery Options screen
  5. click on Startup Repair
  6 follow the instructions on the screen.

  Restart the computer and see if you manage to boo on the desktop. If the problem persists, try Method 2.

  See this link for more information.
  Startup Repair
  http://support.Microsoft.com/kb/925810

  If this step does not help then try step 2.

  Step 2

  Perform a system restore on your computer offline.

  1 boot from the DVD
  2. Select the language
  3. click on "Repair your computer" on the install now screen
  4. click Next in the System Recovery Options screen
  5. click on system restore.
  6. choose the date that you want to restore

  See this link for more information.
  A Windows Vista computer that has a partition to the Windows recovery environment (Windows RE) is not restored successfully using Windows complete PC Backup and Restore
  http://support.Microsoft.com/kb/946010

  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• laptop HP 2000: screen turns black with cursor indicating after the password is entered first turning on pc

  Bought this pc at Wal-Mart-mart December 2013, it's a 2000 hp notebook pc with windows 8 when you turn the pc press the keys to enter my password of the user, and after I entered my password screen goes black except the white arrow, proposed by the mouse pad will not do anything after that

  Enter the BIOS by typing/holding the F10 key immediately after switching on the laptop. Use Diagnostics test your hard drive and memory.