Mac Pro does not sleep

Similar Questions

• How to repair Mac Pro does not start

  MY Mac Pro when they start up Logo right, Apple may see

  Hi jorge, this is a topic of Apple Support on what to do if your Mac does not illuminate.

  https://support.Apple.com/en-us/HT204267

  If you have another Mac, you can try to boot in target disk Mode and make a backup of your files.

  Share files between two computers with target - Apple Support disk mode

  Then you can try following the advice of this user tip

  .. Step by step to fix your Mac

  Another possibility is trying to boot now the command option + keys r to your recovery volume. If it works, re - install OS X on the internet. https://support.Apple.com/en-us/HT201314

• Mac Pro does not recognize the Ethernet ports

  After a reboot for my end of 2013 Mac Pro OS x 10.11.3, the two Ethernet ports are most recognized. Suffice to say not 'connected' is one of them.

  I have:

  • rebooted a couple of times
  • Reset the PRAM
  • the power disconnected for several minutes left
  • tried two different terminals
  • tried two different Ethernet cables
  • tried the two Ethernet ports

  The light of the end device will blink.

  WiFi works fine.

  What should I do before I decide that there is a hardware problem?

  Bob

  There was a recent post about the same problem and found a solution. Give it a try: Re-built-in ethernet disappeared.

• New Mac Pro does not connect via WiFi to my ATT router.

  I have a brand new Mac Pro garbage but I'm unable to get it to connect to my ATT wireless router. My phone, the laptop and the TV do it but not my main computer. Oddly enough, I AM able to connect via WiFi for the Mac Pro to my laptop. Any suggestions?

  Please post your question in the Mac Pro support forum... Mac Pro

  If you have a question about one of the Apple routers... the AirPort Express, AirPort Extreme or Time Capsule airport... the products pictured below that we support in this forum... we can probably help you.

  

• MacBook Pro 13 inch: Mac Pro does not connect to 5510 e printer

  I have problems connecting with one of my printers.

  My iMac will connect with my printer (an HP Photosmart 5510e and Photosmart 7280) wireless without any problem.  My 13 inch (2009) MacBook Pro connects to the 7280 wireless but does not connect to the HP Photosmart 5510e device.

  I recently had to restart my MacBook and reconnected it to a printer without any problems.  I can't find the driver for a printer so I don't know if the 5510's could not reload when I did the reboot.

  Any suggestions as to what I should have fact/do to recover from the situation?

  @Hahti

  You have installed the driver yet?

  http://support.HP.com/us-en/drivers/selfservice/HP-Photosmart-5510-e-all-in-one-printer-series---B1/5053904/model/5053905

  REO

• CC Adobe on my new Mac Pro does not complete the installation after running the Migration Wizard

  Hey guys, just bought a mac pro, and assistant of migration used to transfer my programs, now adobe cc stops half way through installation and said: cc adobe, requires to solve this problem, is damaged or missing, download and install adobe cc on "http..., tried to download it again, did not work, anyone who knows what to do?"

  Hello

  Creative cloud apps cannot be migrated as a return to the top, you will need to download and install apps as a new on the new machine, please follow the steps below to remove and reinstall the creative cloud application:

  1 force quit Adobe all processes in the activity monitor (for example, CC, Core sync, the broker CC library, Office, Adobe, Adobe CPI, demon Adobe Crash etc..)

  2-go to: Finder > Applications > utilities > Adobe installer > uninstall Adobe Creative cloud (if problems uninstall Trash)

  3-go to: Finder > Applications > utilities > (delete these two folders - creative cloud Adobe and Adobe Application Manager )

  4 - right click on the Finder icon, then select the "Go - To" folder. You will get a text box, type in the following command and then press the 'return '. ("Not to be missed ~ symbol")

  ~/Library (It will open the folder of the user's library.)

  5. browse to the Application Support > Adobe > trash folder OOBE and AAM Updater folder so

  6. new > right-click on the icon in the Finder and select "go to" folder option. > you will get a text box, type in the following command and then press the 'return '.

  / library (It will open the library system folder.)

  7. browse to the Application Support > Adobe > trash folder OOBE and Adobe Application Manager / after that, rename the SL-STORE like SL-STORE_OLD

  8 - go to the Apple icon > System Preferences > privacy and security > firewall > OFF (to do this, you will need to click on the padlock in the lower left of this machine and then enter your mac password)

  9 - go to the Apple icon > System Preferences > Security and privacy > General > allow applications downloaded on should be put on ANYWHERE

  10 - Make sure of course there is no other program security Internet enabled - if it is then go ahead and launch CC app and login and check (check your extensions as well id browser it disable any toolbar security or advertising, blocking of extensions you installed them)

  Adobe 11 - run cleanup tool. > If so, select "Adobe Application Manager for Mac OS X 10.6 ' and then click on"Clean up selected. "

  http://download.Macromedia.com/SupportTools/cleaner/Mac/AdobeCreativeCloudCleanerTool.dmg

  12 - Click on the link below and download Creative Cloud Installer file and use them to install the creative Cloud Desktop application.

  https://ccmdls.Adobe.com/AdobeProducts/KCCC/1/OSX10/CreativeCloudInstaller.dmg

• Mac Pro does not.  It has a box with a question mark?

  My Mac Pro has stopped working all of a sudden.  We stop for the night and the next day, we got a box with a question mark?  Any ideas?

  Hope this helps.

  OS X: on OS X Recovery - Apple Support

• How to wake up 2008 Mac Pro in his sleep?

  In the past, when my Mac Pro (2008) fell asleep, I could watch on my laptop under the heading 'Shared' in a Finder window and the Mac Pro would be there. I could click on it and the Mac wakes up.

  Now, I can't see the Mac listed under the section shared in the Finder when its sleepy, so I have to go to press the power button. Back To My Mac is activated in the settings of the energy as 'Wake For Ethernet Network Access'.

  What Miss me?

  It is possible that the Mac Pro does not appear because its file sharing settings have been changed (on the Mac Pro).

  You must have a Hello sleep Proxy on your network, such as an airport or an Apple TV device point.

  Immediately to the request and Hello sleep Proxy - Apple Support

  .

• My internal camera on my MacBook at the beginning of 2008 Pro does not work

  My internal camera on my MacBook at the beginning of 2008 Pro does not work.

  One of them will solve your problem of camera:

  (1) If your Mac restart does not solve the problem,

  (2) use http://support.apple.com/kb/HT2090 from Apple.

  (BTW - troubleshooting section called an "iSight" camera.  However, after that article was published, Apple has changed the name of the built-in camera on the recent "iSight" Macs "FaceTime", then "FaceTime HD."  Whatever the name of your built-in camera, the same info and troubleshooting applies.)

  Be sure to test several Apple app (photo booth, FaceTime, iMovie, QuickTime Player, etc.) in more than one user account.  Do NOT use the 'Guest' for this test account.  If you don't have more than one user account for testing, create one now.  If you need help, how is explained in http://support.apple.com/en-us/HT201754.

  A 'Standard' user account is all you need for the tests.

  (3) If your camera will work correctly even with Apple applications, use OS X Recovery to completely reinstall your Mac OS since system recovery stored on your startup disk.  Don't bother test Skype or other 3rd party apps until you have your camera works with applications Apple.

  (4) If none of the suggestions above resolve your issue, contact Apple or one of the Apple-Authorized Service Provider to have your Mac professionally repaired. Don't forget to back up your Mac and Deauthorize iTunes before the call for tenders for the service.

  Post edited by: Jim EZ

  Mac OSX 10.11.3

• my mac book does not light and I get three beeps while it tries to start

  my mac book does not light and I get three beeps while it tries to start

  Three beeps is almost always a problem of memory RAM.

• My Mac Pro is not turn on; There is power at the output, light or sound when I push the button 'on '. Any suggestions? Thank you

  My Mac Pro is not turn on; There is power at the output, light or sound when I push the button 'on '. Any suggestions? Thank you

  It was AC off recently?

• iPad keyboard Smart Pro does not

  iPad Pro is not intermittently at the Smart Pro IPad keyboard.

  Your occurs when you attempt to enter text in the field application of e-mail address

  When the mail application has been opened by Safari to post a link etc.

  Hello BobBurns,

  Thank you for using communities of Apple Support.

  If I understand your message that your keyboard Smart Pro iPad fails all the time. I recommend the steps described in the following article to help solve this type of problem:

  Use your Smart keyboard with iPad Pro

  Get help

  If your iPad Pro does not detect your Smart keyboard or you see an 'Accessory not supported' alert on your iPad Pro, make sure that there are no debris or plastic on the pins of the Smart connector on the keyboard or the Smart Connector on the iPad Pro. Also, try the following steps:

  1. Make sure your iPad Pro and Smart Keyboard are in a position to Type .
  2. Remove the Smart keyboard for your iPad Pro.
  3. Restart your iPad Pro.
  4. Reconnect the Smart keyboard.

  Best regards

• Satellite M30X Pro does not charge on current alternative

  Hello. My satellite M30X pro does not load when it is connected to the adapter sector, I have had the laptop for about a year and a half now

  Is this problem likely to be due to the charger doesn't work does not correctly? I don't want to spend £60 for a new charger, namely the charger works fine, and it's actually something else no longer works correctly!

  Thank you

  Is it possible to use the laptop with the adapter?
  No AC lights?
  If yes then the AC adapter works fine.
  In this case, if the battery is not either of the malfunctions of the battery or the thing will not on the motherboard.
  But mostly the battery fails.

• MacBook Pro does not recognize my SD card?

  My MacBook Pro does not recognize my SD card, even with an external card reader. However, this same SD card can be read through my iMac. Don't know what I'm doing wrong here, but I'm going abroad and would like to be able to download my pictures I'll.

  You didn't say what model / year is your MacBook Pro.

  I found this video, don't know if it applies to you. https://www.YouTube.com/watch?v=nbc0l-t3f1Q

  Kim

• HD pro does not start

  Hi and sorry for my bad English
  Sometimes HD pro does not connect properly and I have to remove the battery so that it restarts correctly.

  Thank you for your help
  Dav74

  Hello, my friend

  HD Pro? You write about Toshiba Camelio Pro HD?