Mac pro hangs at startup after update to El Capitan

TTITLE says it all.  Computer works only in start mode course now.  Was able to download and run EtreCheck in secure boot mode.  Results below.  Results of the last log less than kernel panic.  Can anyone help?

EtreCheck version: 2.9.12 (265)

Report generated 2016-06-29 12:38:32

Download EtreCheck

Time 02:08

Performance: Excellent

Click the [Support] links to help with non-Apple products.

Click the [details] links for more information on this line.

Problem: The computer is restarted


Kernel panic causing the system to crash after update to El Capitan

Hardware information: ⓘ

Mac Pro (end 2013)

[Technical details] - [User Guide] - [warranty & Service]

Mac Pro - model: MacPro6, 1

1 3.5 GHz 6-Core Intel Xeon CPU E5: 6 strands

16 GB expandable RAM - [Instructions]


ok 4 GB ECC DDR3 1866 MHz


ok 4 GB ECC DDR3 1866 MHz


ok 4 GB ECC DDR3 1866 MHz


ok 4 GB ECC DDR3 1866 MHz

Bluetooth: Good - transfer/Airdrop2 taken in charge

Wireless: en2: 802.11 a/b/g/n/ac

Video information: ⓘ

AMD over-pants D500 - VRAM: 3072 MB

AMD over-pants D500 - VRAM: 3072 MB

PA271W 2560 x 1440 @ 60 Hz

System software: ⓘ

OS X El Capitan 10.11.5 (15F34) - since startup time: less than an hour

Disk information: ⓘ

APPLE SSD SM0512F Disk0: (500,28 GB) (Solid State - TRIM: Yes)

EFI (disk0s1) < not mounted >: 210 MB

Macintosh HD (disk0s2) /: 499,42 go-go (345,03 free)

Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

USB information: ⓘ

Apple Inc. BRCM20702 hub.

Apple Inc. Bluetooth USB host controller.

Hub keyboard Apple, Inc.

HP HP wireless KB and MS

Apple Inc. Apple Keyboard

FireWire information: ⓘ

G-TECH G-DRIVE 400mbit - 800 max

EFI (disk1s1) < not mounted >: 210 MB

Backup of Volumes/NeonBunny NeonBunny Backup (disk1s2): 1.00 TB (187,87 GB free)

Office backup HD (disk1s3) Volumes/Desktop HD backup: 999,72 go-go (406,82 free)

G-TECH OEM ATA Device 00 800-800 max

EFI (disk2s1) < not mounted >: 210 MB

Time Machine (disk2s2) Volumes/Time Machine: 1,00 TB (562,63 GB free)

Desktop Hard Drive (disk2s3) Volumes/Desktop Hard Drive: 999,52 go-go (406,55 free)

Information crush: ⓘ

Apple Inc. Thunderbolt_bus_2.

Apple Inc. Thunderbolt_bus_1.

Thunderbolt of Apple Inc. to FireWire adapter

Apple Inc. Thunderbolt_bus_0.

Configuration files: ⓘ

/ etc/hosts - Count: 22

Goalkeeper: ⓘ

Mac App Store and identified developers

Kernel Extensions: ⓘ

/ Library/Extensions

[no charge] - 900nexusAudio (1.4.0 - SDK 10.10 - 2016-06-25) [Support]

[no charge] (1.0.0 - SDK 10.9-2016-06-25) [Support]

/ System/Library/Extensions

com.nvidia.CUDA [no charge] (1.1.0 - 2016-06-25) [Support]

com.paceap.kext.pacesupport.master [no charge] (5.9 - 10.6 SDK - 2016-06-25) [Support]


com.paceap.kext.pacesupport.Leopard [no charge] (5.9 - 10.4 SDK - 2012-07-11) [Support]

[no charge] com.paceap.kext.pacesupport.Panther (5.9 - SDK 10.-1-2012-07-11) [Support]

com.paceap.kext.pacesupport.snowleopard [no charge] (5.9 - 10.6 SDK - 2012-07-11) [Support]

com.paceap.kext.pacesupport.Tiger [no charge] (5.9 - 10.4 SDK - 2012-07-11) [Support]

Launch system officers: ⓘ

[loaded] 9 tasks Apple

[loading] 163 tasks Apple

[operation] 66 tasks Apple

Demons of launch system: ⓘ

com.Apple.watchdogd.plist [failure]

[loaded] 44 tasks Apple

[loading] 162 tasks Apple

[operation] 84 tasks Apple

Launch officers: ⓘ

[no charge] com.adobe.AAM.Updater - 1.0.plist (2015-06-23) [Support]

com.extensis.FMCore.plist [no charge] (2016-06-26) [Support]

com.Fortinet.FortiClient.fssoagent_launchagent.plist [no charge] (2015-01-16) [Support]

com.nvidia.CUDASoftwareUpdate.plist [no charge] (2016-06-29) [Support]

[no charge] - Updater.plist (2014-12-05) [Support]

com.RealVNC.vncserver.PerUser.plist [no charge] (2014-04-01) [Support]

com.RealVNC.vncserver.prelogin.plist [no charge] (2014-04-01) [Support]

Launch of the demons: ⓘ

[no charge]    PACESupport.plist (2012-07-11) [Support]

com.adobe.SwitchBoard.plist [no charge] (2014-05-29) [Support]

com.Adobe.fpsaud.plist [no charge] (2016-06-13) [Support]

com.barebones.BBEdit.plist [no charge] (2014-06-19) [Support]

com.Bombich.ccchelper.plist [no charge] (2016-06-25) [Support]

com.CrashPlan.engine.plist [no charge] (2016-05-17) [Support]

com.GoPro.stereomodestatus.plist [no charge] (2014-01-29) [Support]

com.Microsoft.Office.licensing.helper.plist [no charge] (2011-03-10) [Support]

com.nvidia.Cuda.Launcher.plist [no charge] (2014-11-05) [Support]

[no charge] - Tool.plist (2014-12-05) [Support]

com.RealVNC.vncserver.plist [no charge] (2014-04-01) [Support]

Other applications: ⓘ

[ongoing] com.etresoft.EtreCheck.268512

[ongoing] org.Mozilla.Firefox.251872

[loading] 419 tasks Apple

[operation] 158 tasks Apple

Internet Plug-ins: ⓘ

AdobeAAMDetect: AdobeAAMDetect - SDK 10.6 (2015-06-23) [Support]

FlashPlayer - 10.6: - SDK 10.9 (2016-06-26) [Support]

QuickTime Plugin: 7.7.3 (2016-05-04)

AdobePDFViewerNPAPI: 11.0.04 - 10.6 SDK (07 / 07/2014) [Support]

AdobePDFViewer: 11.0.04 - 10.6 SDK (07 / 07/2014) [Support]

Flash Player: - SDK 10.9 (2016-06-26) [Support]

Default browser: 601 - SDK 10.11 (2016-05-04)

SharePointBrowserPlugin: 14.4.3 - 10.6 SDK (2014 / 07 / 08) [Support]

Silverlight: 5.1.41212.0 - SDK 10.6 (2016-05-03) [Support]

JavaAppletPlugin: Java 8 73 02 version Check build update (06-02-2016)

3rd party preference panes: ⓘ

Preferences CUDA (2014-08-21) [Support]

Flash Player (2016-06-13) [Support]

GoPro (2014-06-01) [Support]

Java (2016-02-06) [Support]

TR-8 (2013-12-05) [Support]

Time Machine: ⓘ

Automatic backup: YES

Volumes to back up:

Macintosh HD: Disc size: 499,42 GB disc used: 154,39 GB


Time Machine [Local]

Total size: 1.00 TB

Total number of backups: 128

An older backup: 29/05/14, 18:39

Last backup: 29/06/16, 11:48

Size of backup drive: adequate

Backup size 1.00 TB > (disc 154,39 GB X 3)

Top of page process CPU: ⓘ

16% firefox

2% WindowServer

2% fontd

0% kernel_task

0% CVMCompiler (2)

Top of the process of memory: ⓘ

Kernel_task 755 MB

Firefox 541 MB

Softwareupdated 524 MB

Sharingd 147 MB

WindowServer 115 MB

Information about virtual memory: ⓘ

9,38 GB of free RAM

6.61 GB used RAM (1.66 GB being cached)

Used Swap 0 B

Diagnostic information: ⓘ

June 29, 2016, 12:33:17 /Library/Logs/DiagnosticReports/Kernel_2016-06-29-123317_[redacted].panic [details]

June 29, 2016, 12:32:38 self-test - spent

June 29, 2016, 12:21:38 /Library/Logs/DiagnosticReports/Kernel_2016-06-29-122138_[redacted].panic [details]

June 29, 2016, 12:19:55 /Library/Logs/DiagnosticReports/Kernel_2016-06-29-121955_[redacted].panic [details]

June 29, 2016, 12:03:34 /Library/Logs/DiagnosticReports/Kernel_2016-06-29-120334_[redacted].panic [details]

June 29, 2016, 11:44:36 /Library/Logs/DiagnosticReports/backupd_2016-06-29-114436_[redacted].cpu_resour ce.diag [details]

/ System/Library/CoreServices/backupd. Bundle/happy/Resources/backupd

June 29, 2016, 11:39:19 /Library/Logs/DiagnosticReports/Kernel_2016-06-29-113919_[redacted].panic [details]

June 29, 2016, 11:37:02 /Library/Logs/DiagnosticReports/Kernel_2016-06-29-113702_[redacted].panic [details]

June 29, 2016, 11:35:45 /Library/Logs/DiagnosticReports/Kernel_2016-06-29-113545_[redacted].panic [details]

June 29, 2016, 11:18:35 /Library/Logs/DiagnosticReports/Kernel_2016-06-29-111835_[redacted].panic [details]

June 29, 2016, 11:16:58 /Library/Logs/DiagnosticReports/Kernel_2016-06-29-111658_[redacted].panic [details]

June 28, 2016, 23:20:06 /Library/Logs/DiagnosticReports/CrashPlanService_2016-06-28-232006_[redacted].c pu_resource.diag [details]


June 28, 2016, 22:52:23 /Library/Logs/DiagnosticReports/Kernel_2016-06-28-225223_[redacted].panic [details]

Anonymous UUID: D8BD978F-CE20-BC0E-9AE3-B2CAD98D978B

Wed Jun 29 12:33:17 2016

Panic report *.

panic (cpu 0 0xffffff801ab04687 appellant): "hfs_swap_HFSPlusBTInternalNode: invalid key length catalogue #0 (3)\n"@/Library/Caches/ ian.c:544 ".

Backtrace (CPU 0), frame: return address

0xffffff921ffeae10: 0xffffff801a6dab12

0xffffff921ffeae90: 0xffffff801ab04687

0xffffff921ffeaed0: 0xffffff801ab03473

0xffffff921ffeaf20: 0xffffff801aaf3be7

0xffffff921ffeaf50: 0xffffff801a931e3a

0xffffff921ffeb060: 0xffffff801a9311de

0xffffff921ffeb100: 0xffffff801a92f4bb

0xffffff921ffeb170: 0xffffff801ab3159c

0xffffff921ffeb1c0: 0xffffff801ab36967

0xffffff921ffeb260: 0xffffff801ab14459

0xffffff921ffeb980: 0xffffff801a92723e

0xffffff921ffeba10: 0xffffff801ab849db

0xffffff921ffebf60: 0xffffff801ac286a1

0xffffff921ffebfb0: 0xffffff801a7ecc66

The process corresponding to the current thread BSD name: mds_stores

Mac OS version:


Kernel version:

15.5.0 Darwin kernel version: kills Apr 19 18:36:36 PDT 2016; root:XNU-3248.50.21~8/RELEASE_X86_64

Kernel UUID: 7E7B0822-D2DE-3B39-A7A5-77B40A668BC6

Slide kernel: 0x000000001a400000

Text of core base: 0xffffff801a600000

Text __HIB base: 0xffffff801a500000

Name of system model: MacPro6, 1 (Mac-F60DEB81FF30ACF6)

Availability of the system in nanoseconds: 40936714424

last load kext to 4709008356: com.nvidia.CUDA 1.1.0 (addr 0xffffff7f9c684000 size 12288)

kexts responsible:

com.nvidia.CUDA 1.1.0

com.paceap.kext.pacesupport.snowleopard 5.9

com Apple.filesystems.autofs 3.0 1.70 110.22.0 1.0.0 2.6.0d0 1


com Apple.Driver.pmtelemetry 1 274,9 3.6.1 1.2.13 1.0.1 274,9 1.4.2 4.4.5f3 7.0.0 1.4.2 1.0.0 4.4.5f3 1 4.0.0 3.1 3.0.8 1.4.2

3.12.8 107 4.1.0 3.7.7 4.4.5f3 3.7.1 3.7.1 3.7.1 3.7.1 3.7.1 3.7.1 3.0.1 1.0.0d1 1.0.0 38 5.5.4

2.8.5 10.2.0 1040.1.1a6 1.0.1 3.1.8 4.0 4.0 2.0 1.8 2.1 1.7 218.0.0

com Apple.NKE.applicationfirewall 163

com Apple.Security.Quarantine 3 8 218.0.0

com Apple.kext.Triggers 1.0 1.0.14d1 274,9 525 108.2.1 11 205,10 1 1.0.0 4.4.5f3 4.4.5f3 1.0.0 274,9 274,9 204.4 1.2.0 1.0.14d1 1.4.2


3.12.8 1.1.0 2.4.1 2.4.1 1.0.0 3.1.9 6.0.0d7 2.2.6 4.1.1 4.1.3 181 3.7.7 1.0.1

com Apple.Driver.USB.cdc 5.0.0

com.Apple.Driver.USB.Networking 5.0.0 1.0.1 2.5.1 3.7.7 4.2.7 2.0.2 1.0.1 4.1.3 4.1.3 2.0.2

4.6.1 3 4.0.4 6.0.2 1.0.1 1.0.1 900.4.1 1.0.3b3 1110.26 1.0.1b8 3.2

com Apple.Driver.corecapture 1.0.4 1.0.1 2.8.1 900.4.1 1.0.1 1.0.1 2.0 1.1 2.0.0 2.0

com Apple.Security.sandbox 300.0 1.0.0d1 2 1.0.5 1.0 417,4 2.1 31 28.30 4.0 2.9 1.4

com Apple.KEC.pthread 1

com Apple.KEC.corecrypto 1.0 1


com.paceap.kext.pacesupport.master [no charge] (5.9 - 10.6 SDK - 2016-06-25) [Support]


com.paceap.kext.pacesupport.Leopard [no charge] (5.9 - 10.4 SDK - 2012-07-11) [Support]

[no charge] com.paceap.kext.pacesupport.Panther (5.9 - SDK 10.-1-2012-07-11) [Support]

com.paceap.kext.pacesupport.snowleopard [no charge] (5.9 - 10.6 SDK - 2012-07-11) [Support]

com.paceap.kext.pacesupport.Tiger [no charge] (5.9 - 10.4 SDK - 2012-07-11) [Support]

Same here > kernel Panics extensions - part 3 - Uninstall...

Tags: Mac OS & System Software

Similar Questions

  • My MacBook Pro won't start after update to El Capitan, how can I go back?


    I really hope that someone can help me here. I've updated to El Capitan Yosemite yesterday through software update, but now when I start the computer I get "no entry" or sign a circle with a diagonal line through it, or the Apple with the progress bar / error message / black screen and it repeats 3 times then stops.

    I'mnot you know where my disk of Mac OS x is so ideally don't want to reinstall the whole system.

    I did a back up of my work using Time Machine before saving, so I hope that I have most of the things I need backup.

    Restart by pressing cmd - R after the tone. It should boot into Recovery. From there, use disk to check/repair disk utility. Quit disk utility and reinstall OS X.

    The circle with a slash through it means that it does not find the necessary boot files.

  • Windows XP hangs on startup after update 2.0.2.

    Hi, I am a new user of Vmware Fusion (or Mac for that matter) so if you think that my problem happened to be quite some pretty stupid mistakes on my part.

    Tuesday, I just noticed that the update to version 2.0.2 and downloaded at short notice. The program wasn't on my Windows XP has been suspended, and I made the mistake of not the have stopped even if it has been suspended. I install the new update without problem, but when I restart my computer and turn it on... Well that's the point that I realized that my windows account is always logged. I noticed that he was waiting to load something, the pointer is an hourglass. But it not let me restart my computer regularly. But once it starts, it freezes on the loading screen windows. Not sure what to do, I'm forced to reboot through the merger of WMware toolbar command. He now says he needs to check a large number of files truncates the files on it, but during the process. It happened pretty fast so I have not heard what it was, but after that, he reached an error and blue screen and tries to restart. At this stage let load normally just gives the same error message, and if I go to safe mode, it just freezes. I noticed that avast trying to do something before the error message. See the attached screenshots for what I mean.

    He also tells me that VMware Tools is not updated, but when I try to update, it doesn't really do anything. I don't think it would work until she starts toward the top right (that I can't do). and unfortunately, I was not smart enough to have a backup of my desktop files (which I need), nor has the Snapshot function before my problem.

    There is a simple problem that solves that I'm not aware of the problem?

    If not, will reinstall the fix (assuming it will work directly in my new v2.0.2)?

    If I reinstall it, is there a way to access the files on Windows XP through my Mac OSX? I can't of course through the Wmware Fusion.

    I'm sorry that if this is not the right place to ask about this, I was directed here through the support for the view part after watching a response.

    There are several thing you can try and basically the same things as if it were a physical machine as the boot with the XP install CD / ISO Image and either use the Recovery Console to repair the registry or do a repair install, but the first thing first of all try to mount the virtual hard drive and retrieve your user data , then, first of all make a backup of the entire Virtual Machine assuming that it is a normal base file Virtual Machine and the Boot Camp partition.

    Take a look at: VMware Fusion (menu bar) > help > VMware Fusion help > managing Virtual Machines > VMDKMounter to help mount a virtual drive as a Mac Volume

    Note: If VMDKMounter is mounted with success you will be unwise and a titled Untitled white drive icon should appear on your desktop.

    Also use VMDKMounter with the Virtual Machine, not suspended and merger shutdown closed...

  • I lost my bootcamp partition after update to El Capitan (solitary method T did not work for me!)

    I lost my bootcamp partition after update to El Capitan (solitary method T did not work for me: () is lost forever?)

    I can't access my files or the partition from the finder

    My bootcamp partition size is 380 GB.

    This is all the information on the situation:

    sudo TPG - r - vv show disk0

    sudo fdisk/dev/disk0

    diskutil list

    sudo-l/dev/disk0 Gdisk

    sudo dd if = / dev/rdisk0s4 account = 1 2 >/dev/null | hexdump - C

    Sudo gdisk/dev/rdisk0


    My bootcamp partition is referred to as a free space

    in the finder

    Thanks a lot for your help!

    How do you have a 100 MB NTFS file system and free space after the partition of 100 MB. You have a MSR (100 MB), but your windows are the current MSD.

    SIP is activated. Your MBR has no bootable entry, because it is not marked. Please describe in detail what steps were tried.

    What is the year/model of your Mac?

  • Can't print with my MacBook Air to my HP Desk Jet 3050 after update of El Capitan.

    Can't print with my MacBook Air to my HP Desk Jet 3050 after update of El Capitan.

    Have you run software update? That's what HP recommends that do you. I hope that he will find and install the updated software from there.

    Does your model listed.

    HP v3.1 for OS X printer drivers

  • After update of El Capitan, TextEdit closes unexpectedly before opening

    After update of El Capitan, TextEdit always closes unexpectedly before the opening, in a user account (which left more than 20 open TextEdit documents, before the update of El Capitan)...

    And in another user account, which has left no documents TextEdit open before the update of El Capitan, TextEdit open without any problems.

    What needs to be done, so TextEdit will open the first user account?

    Is there a way to reset the list of open documents TextEdit?

    Please quit the application. Force quit if necessary.

    He raises in holding down the SHIFT key and clicking on its icon. This action prevents the last State of the window to be recharged.

  • HP LaserJet MFP M127fn Pro: Cannot save a HP LaserJet Pro M127fn MFP scan after update Mac Sierra

    I have a HP printer/scanner/fax multifunction, and after updating my Mac OS X Sierra, the "HP Scan" app does not allow me to save my scans more. Printing seems to work very well. Scanning occurs, but when it comes to saving what I scanned, 'save' button is grayed. I have read elsewhere on the forum than what has happened to other people using ordinary scanners (not multifunction units), but the software offered for regular scanners would not apply to my device.


    It is incompatible with the Sierra of HP scanning.

    Download and use HP Easy Scan instead, it can be downloaded from the link below:

    Kind regards


  • My Macbook Pro does'nt connect after update to 10.11.6

    Hi all.

    After update from my Macbook Pro to 10.11.6 he starts, but after entering my password, then pressing enter shows the loading animation and it is.  I let him go lastnight believe he worked at something after the update, but this morning, nothing...

    An advise, please.

    Kind regards


    Please take each of these steps that you have not already tried it. Some of them are not applicable to your model or your situation. Stop when the problem is resolved.

    To restart a computer is not responding, press and hold the power button for a few seconds until the unit turns off, then release, wait a few seconds and press again briefly.

    Step 1

    The first step to respond to a startup failure is to secure data. If you want to keep the contents of the boot drive and you have not already at least a current backup, you should try to back up now, before we do anything else. It may or may not be possible. If you don't care the data changed since the last backup, you can skip this step.

    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to store backup data.

    a. starting the partition recovery or an hour Local Machine backup volume (button option key at startup). When the OS X Utilities appears, launch disk utility and follow the instructions in this article to support. You'll be 'restoration' the boot on the backup volume volume.

    If you use 2 FileVault, you must first unlock the boot volume. Select its icon ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu. When you are prompted, enter your login password.

    (b) If step 1 fails due to disk errors, and no other Mac is available, then you may be able to save some of your files by copying them in the Finder. If you already have an external hard drive with OS X installed, the start of it. Otherwise, if you have access to the Internet, follow the instructions on this page to prepare the external hard drive and install OS X on it. You will use the installation program of recovery, rather than download it from the App Store.

    c. If you have access to a Mac, and it work and have both the non-working Mac FireWire ports or stroke, start the Mac non-working in target disk mode. Work Mac to copy the data to another drive. This technique will not work with USB, Ethernet, Wi - Fi or Bluetooth.

    d. If the internal drive of the non-working Mac is replaceable by the user, remove it and climb into a docking station that is pregnant or an external drive. Use another Mac to copy the data.

    Step 2

    If you have booted from an external drive, make sure that the internal boot volume is selected in the pane of the system preferences Startup disk.

    Start in safe mode. Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. If you do not see the words "Safe Boot" in the start screen, you did not start in safe mode. Ask for additional instructions.

    Safe mode is much slower to boot and run as normal, and some things don't work at all, including the networks without wire on some Macs.

    The login screen is displayed even if you normally connect automatically. You must know the password for the connection to connect. If you have forgotten the password, you will have to reset it before you begin.

    If the startup progress bar gets stuck for more than a few minutes, or the system stops automatically when the progress bar appears, the boot volume is corrupted and the player is probably defective. In this case, go to step 9. If you have another problem with the player, replace it immediately.

    If you can start and log in in safe mode, empty the trash and then open the window of info on the boot volume ("Macintosh HD", unless you have given it a different name.) Make sure you have at least 9 GB of space available, as shown in the window. If you do not, copy as many files as necessary on another volume (not another folder on the same volume) and delete the originals. Deletion is not complete until you empty the trash again. This, until the space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)

    If the boot process hangs again, the problem is probably caused by third-party software you have installed. Ask for additional instructions.

    Step 3

    If the startup process stops at a gray screen together with a mobile cursor, then the logon dialog box may be active but not visible because of a bug. You may be able to connect by using the arrow keys or the cursor to select the password field and type your password as usual.

    Step 4

    Case of failure of step 3, the boot volume can be complete. If you saw previously implemented guard space drive is low, it is certainly the case. You might be able to start in safe mode , even if you cannot boot normally. Otherwise, boot from an external hard drive, or well technology for step 1b, 1 c or 1 d allows to mount the internal drive and delete some files. According to the documentation from Apple, you need at least 9 GB of free space on the boot (as shown in the Infolog) for normal operation volume.

    Step 5

    If a Mac desktop (without the built-in keyboard) crashes on a gray screen together with a mobile cursor, the keyboard may not be recognized. Hold down the button on the side of a wireless Apple keyboard to make it discoverable. If need be, replace or recharge the batteries. If you use a USB keyboard connected to a hub, connect it to a built-in port.

    Step 6

    Sometimes, a startup failure can be solved by resetting the NVRAM.

    Step 7

    If there is an integrated optical drive, a disk may be stuck in there. Follow these instructions to remove it.

    Step 8

    Press and hold the power button until the unit turns off. Disconnect all devices wired except those needed to start and remove all aftermarket expansion cards. Use another keyboard and/or mouse, if these devices are wired. If you can start now, one of the devices that you disconnected, or a combination of both, the origin of the problem. Discover that it is a process of elimination.

    Step 9

    Launch the utility disk in recovery mode (see step 1). Select the boot volume, and then run the repair disk. If problems are found, repeat until that clear. If disk utility reports that the volume is not repairable, the drive is defective and must be replaced. You can choose to tolerate such malfunction in the reader's life. In this case, delete the volume and restore it from a backup. If the same thing happens again, replace the drive immediately.

    It is one of the rare situations where you must also run repair permissions, ignoring the erroneous warnings, that it can produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.

    Step 10

    If the boot device is an aftermarket SSD, it may have an update and/or a forced "garbage collection". Instructions how to do this with a Crucial SSD of brand have been posted here. Some of these instructions may apply to other brands of SSDS, but you should check with the technical support of the provider.

    Step 11

    Reinstall the OS. If the Mac has upgraded an earlier version of Mac OS X, you need the Apple ID and password used to upgrade.

    Step 12

    Do as in step 11, but this time clear the disk utility boot volume before installing. The system should automatically restart in The Migration Wizard. Follow the prompts to transfer data from one Time Machine or another backup.

    Step 13

    This step applies only to models that have a battery logic-board ("PRAM"): all of the Mac Pro, MacBook with a removable main battery and a few others (models not updated). A flat battery logic-board may cause a boot failure. In general the failure will be preceded by the loss of the system and boot disk clock settings. Refer to the user manual for replacement instructions. You may need to take the machine to a provider of services to have to replace the battery.

    Step 14

    If you get this far, you probably deal a hardware failure. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

  • Mac Pro 2008 No. Startup Manager Access/Gray screen on startup

    I'm in a difficult situation and hoping a Ninja Mac can give a helping hand.

    Had a RAM issue (is no longer recognized a pair of memory modules in a 2008 Mac Pro, El Capitan), and among the troubleshooting steps, I did a PRAM reset (press / hold down ALT + CMD + P + R during startup) just to see if it could resolve. Unfortunately, the Mac would not start in front of a gray-white screen with a flashing icon of folder/question mark. Returned never me to get there.

    I had read that resetting the PRAM the disc start, among other things, may need to be reset afterwards, and this seems to be the case. Looked this solution and kept diligently press Option key during startup. This time, no folder icon, instead a sensitive cursor, but nothing else. Gray-white screen only, no boot manager to select the startup disk is suitable.

    I also tried the following...

    1. Starting in the Diagnostic Mode... Gray screen.
    2. Restore/recovery... Gray screen.
    3. Reset the SMC... Gray screen.
    4. Enter Safe Mode... Gray screen.

    OS (and apps) on flash PCI cards. All files are on hard disks in the 4-Bay, as well as a player flash remains connected to a (used as a scratch of PS) free SATA port. So I can't really share, but I wonder if I shoot all readers it would require a search for another source?

    I create an El Capitan USB boot (currently copy with createinstallmedia), but don't expect that it will offer what anyone else that its use is based on access to the Startup Manager at startup..., that I can't do. There are the graphics on the screen (missing folder icon, mobile mouse cursor) so can not imagine a video problem.

    Looking forward to enter here.


    I created a USB bootable OS X installer using these instructionsand createinstallmedia. After some messing around with the Terminal syntax USB was ready to go. My concern, however, was that the operating instructions required by selecting the drive of the Startup Manager... which I could not access.

    With the USB stick plugged in I started to turned on the Mac while pressing the key OCCUPIED Palestinian territory and this time, the selection screen pops up showing just the USB key for installation of El Capitan. Got that we open and instead of installing I chose Startup Manager in the installation menu bar, took my normal OS drive and rebooted. Back in business, no problems.

    This put aside, although I understood that reset PRAM would also require reselect startup disk, I don't have a hot clue why did not appear the Boot Manager - or any other useful diagnostic. If someone could throw some light here would be appreciated.

  • Officejet Pro L 7680 problems after update drivers from leopard to snow leopard

    Updated to Snow Leopard from Leopard on Mac Pro with 4 HD and 12 GB of RAM.

    Follow the instructions in the Web site for the upgrade to the new driver from HP.  When I click on the HP utility now I get the error message:

    "Incompatible components - some components installed on your computer have been developed for a different version of the HP utility. These components will not be loaded and some features related to your device won't be available. Please click on HP assistance point in the toolbar to visit the online HP Support site and download the latest versions of the HP software. "Some features do not appear in the HP utility, including scan functions.

    Followed the instructions to the letter.  No mention of deleting the HP files in the library.  Would this sole the problem?  Receive information on how to get rid of the old version and install the new one driver version. Thanks, Araya

    Hi Araya,

    Please run a scrubber to remove any HP software installed on your Mac, it will remove most recent and any previous Mac software as well:

    * Please note that the following steps will delete all HP software installed.

    1. click on menu go (click the desktop, then watch the menu in the bar at the top of the page)
    2. Select Applications
    3 select the Hewlett-Packard folder
    4. double-click on uninstall HP application
    5 follow the uninstall to prompt to select a device to uninstall
    6. press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall
    7 approve any prompt to uninstall all HP software.

    In order to avoid any possible problem, also to repair disk permissions before installing the software:

    1. open the Applications folder.
    2. go to the Utilities folder.
    3. double-click on disk utility.
    4 Select the hard disk that contains the boot volume.
    5. go to the first aid tab and select Repair disk permissions.
    Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The journal of the progress will tell you when the process is complete.

    Then install the software for Snow Leopard. as you probably more download this file already, just check by comparing the name of the file:

    After completing the installation, restart the mac and install the latest driver by clicking the Apple icon, then software updated.

    Please let me know of any problems,


  • Box of configuration error on acrobat pro 11.0.11 after update.

    Screen Shot 2015-12-14 at 20.16.38.png

    I had a motherboard of ew placed in the book of mac pro. reinstall all the software Time machine. I think it worked well, but shortly after reinstalling I upgraded to Pro and I think Acrobat reader which was the Dc version then kapok! Configuration error.

    Hi Darmanin123,

    See this KB doc. error "Unable to install" received when installing Adobe Creative Cloud desktop application.

    Uninstall the CD, restart your Mac & reinstall acrobat Adobe Reader DC Adobe - Adobe Acrobat Reader DC Distribution.

    Also uninstall Acrobat Pro XI & reinstall, update 11.0.14 version.

    Kind regards

  • MacBook Pro wifi hardware not installed after update of El Capitan


    I connected my macbook this morning to find that I had a gray wifi symbol with an x through it saying ' wifi: no hardware installed '. I'm taking in the Apple Store to be looked at in a few days, but only I was wondering if anyone in this community has experienced a similar issue that has an easy solution so that I can return to the top and run. It worked all fine until this morning.

    Ive updated to El Capitan - 10.11.1

    I have a Macbook Pro 13 inch retina end 2012

    Thanks in advance

    This means that the two Wi - Fi drivers are damaged or that your wireless card has stopped working.

    A good way to find out what the problem is to start up in OS X Recovery in now pressed the command keys so much R during start up your Mac to the top. Once your Mac is turned on, look at the Wi - Fi icon in the upper right and see if you can choose any Wi - Fi network. If so, reinstall OS X.

    However, if you can not choose any network, it is probably a hardware problem, so you have to take your Mac to an Apple Retail Store or dealer to get the Wi - Fi card replaced.

  • Mac Pro running very slow after El Capitan install

    My portable Mac Pro (before mid-2013) was working fine until I installed 3-weeks to El Capitan. Now the spinning color wheel open almost all the time when I switch to another operation.

    Run and view the results here so that we know more about your configuration.


    This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

  • Mac Pro is not displayed after the passage of the screens

    OK, so this is a strange problem but it's very annoying (at least for me). I just bought a LG Ultrawide 29 "display and connected via a HDMI cable to my Mac Pro (Home machine) and a second HDMI cable to my Macbook Pro (desktop computer). The Mac pro / Macbook pro good work with the big screen, HOWEVER, when I use my Mac pro and select the tilt of the screen to switch to the HDMI 2 connection, it works and rocking on my Macbook pro. But when I try to switch it back to HDMI 1 (Mac Pro), it comes back with a black screen and says no signal. Even if I plug the HDMI cable it does not work. I set the timer to 3 hours sleep, doesn't always help. I know he's not missing sleep because itunes can be played when I spend and still playing music throughout and continued when I try to switch back. The only way I could get is long, press the button on my Mac Pro and restart.

    The only reasonable difference that I know is that the Macbook pro is running Yosemites, while my Mac Pro running Beta El Capitan. I have a feeling, this is probably the cause, but I just wanted to know if someone has solved this problem somehow.

    Thank you

    Hello Hemlock70,

    Thank you for using communities of Apple Support.

    I understand that your external screen remains completely black, with a message no signal, during the passage of the views.  For assistance with this problem, please go through the steps in the link provided below.

    Get help with graphical problems on external displays connected to your Mac.

    Take care.

  • InDesign 6.0 on Windows 7 hangs at startup after time change

    My InDesign 6.0 running on Windows 7 hangs at startup. I was working on the program when my time system changed last night and now, there's an error between two timestamps. I followed the instructions to remove preferences, to remove default values and reinstalled everything. I can't find the SavedData file according to the instructions. What should I do next?

    This is the accident report.

    Version = 1

    EventType = APPCRASH

    EventTime = 130594285899142630

    ReportType = 2

    Consent = 1

    UploadTime = 130594285899462648

    ReportIdentifier = e25ae4d0 - 62 2-11e4 - 8 17-026090540701

    IntegratorReportIdentifier = e25ae4cf - 62 2-11e4 - 8 17-026090540701

    WOW64 = 1

    1. Response.Type = 4

    SIG [0]. Name = name of the Application

    SIG [0]. Value = InDesign.exe

    GIS [1]. Name = Version of the Application

    GIS [1]. Value =

    GIS [2]. Name = timestamp of the Application

    GIS [2]. Value = 51fb7197

    GIS [3]. Name = name of the Module fault

    GIS [3]. Value = ObjectModel.dll

    GIS [4]. Name = Fault Module Version

    GIS [4]. Value =

    GIS [5]. Name = Fault Module Timestamp

    GIS [5]. Value = 51fb7185

    GIS [6]. Name = Exception Code

    GIS [6]. Value = c0000005

    GIS [7]. Name = offset of the Exception

    GIS [7]. Value = 000179d 4

    DynamicSig [1]. Name = OS Version

    DynamicSig [1]. Value=6.1.7601.

    DynamicSig [2]. Name = locale ID

    DynamicSig [2]. Value = 1033

    DynamicSig [22]. Name = additional Information 1

    DynamicSig [22]. Value = 0a9e

    DynamicSig [23]. Name = additional Information 2

    DynamicSig [23]. Value = 0a9e372d3b4ad19135b953a78882e789

    DynamicSig [24]. Name = additional Information 3

    DynamicSig [24]. Value = 0a9e

    DynamicSig [25]. Name = additional Information 4

    DynamicSig [25]. Value = 0a9e372d3b4ad19135b953a78882e789

    UI [2] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\InDesign.exe

    UI [3] = Adobe InDesign CS6 has stopped working

    UI [4] = Windows can check online for a solution to the problem.

    UI [5] = check online for a solution and close the program

    UI [6] = check online for a solution later and close the program

    UI [7] = close the program

    LoadedModule [0] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\InDesign.exe




    LoadedModule [4] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\ObjectModel.dll

    LoadedModule [5] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\PMRuntime.dll

    LoadedModule [6] = C:\Windows\syswow64\PSAPI. DLL



    LoadedModule [9] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\tbb.dll












    LoadedModule [21] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\Database.dll

    LoadedModule [22] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\Public.dll

    LoadedModule [23] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\ACE.dll




    LoadedModule [27] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\BIB.dll

    LoadedModule [28] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\CoolType.dll

    LoadedModule [29] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\MPS.dll

    LoadedModule [30] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\AGM.dll

    LoadedModule [31] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\ARE.dll

    LoadedModule [32] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\BIBUtils.dll




    LoadedModule [36] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\AFL.dll

    LoadedModule [37] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\icuuc40.dll

    LoadedModule [38] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\icudt40.dll

    LoadedModule [39] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\icuin40.dll

    LoadedModule [40] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\amtlib.dll







    LoadedModule [47] = C:\Windows\system32\IPHLPAPI. DLL

    LoadedModule [48] = C:\Windows\system32\WINNSI. DLL

    LoadedModule [49] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\adobecaps.dll

    LoadedModule [50] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\boostfilesystem.dll

    LoadedModule [51] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\boostsystem.dll

    LoadedModule [52] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\boostregex.dll

    LoadedModule [53] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\icucnv40.dll

    LoadedModule [54] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\ASLSupport.dll

    LoadedModule [55] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\WRServices.dll



    LoadedModule [58] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\WidgetBin.dll



    LoadedModule [61] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\AdobeOwl.dll

    LoadedModule[62]=C:\Windows\WinSxS\ 455none72d576ad8665e853\gdiplus.dll

    LoadedModule [63] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\AdobeOwlCanvas.dll

    LoadedModule [64] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\adbeape.dll

    LoadedModule[65]=C:\Windows\WinSxS\x86microsoft.vc90.crt1fc8b3b9a1e18e3b9.0.30729.6161none 50934f2ebcb7eb57\MSVCR90.dll

    LoadedModule[66]=C:\Windows\WinSxS\x86microsoft.vc90.crt1fc8b3b9a1e18e3b9.0.30729.6161none 50934f2ebcb7eb57\MSVCP90.dll














    LoadedModule [80] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\updaternotifications.dll







    State [0]. Key = transport. DoneStage1

    State [0]. Value = 1

    FriendlyEventName = Stopped Working

    ConsentKey = APPCRASH

    AppName = Adobe InDesign CS6

    AppPath = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\InDesign.exe

    reset your id, help InDesign preferences | Setting the preferences

Maybe you are looking for