MacAfee says real-time internet security disabled during access via Firefox.

Similar Questions

• Defender pro 5-in-1 is unable to run, because the real-time protection is disabled

  I installed Defender pro 5 in 1, it won't work. He said: real-time protection is disabled. don't know how to turn it on

  Never heard of Defender Pro 5 in 1 until now.

  Suggest you contact Defender Pro 5-in-1: http://www.defender-pro.com/support/

• 3rd party Internet Security disables the CD on Satellite A30 player

  Sorry to post a help on the 3rd Internet security software on a toshiba forum but ive been told its doing with my toshiba cd player. Well, without installing (which i repeatdly told Norton) it works fine but with it installed autorun dosnt work and it is very difficult to access the cd drive. I think that a lot of people have had and solved the problem im having so please could you share with me how do. Yours Sincerely,
  Daniel short

  Hi daniel,.

  could test you the firewall settings, maybe there is a setting that affects the CD ROM drive.

  I had googled around but found nothing that could solve your problem!

  One question: do you use the OEM OS from Toshiba recovery or a full version of XP and it's house or teacher?

  Goodbye, Sam

• Protection in real time in Security Essentials in Windows 7

  How can I enable Security Essentials time real Protection permanently under Windows 7?

  If you receive a notification that MSE is off / has a problem, then either you have a problem with MSE, or the PC is infected, or you have installed another application of security/scanning, or you used a third-party maintenance utility

• Run a VI in real-time without a delay

  Hello

  I want to communicate in real time with a sound level meter via a serial port. I have already created my program, but I still have a 3 second delay, maybe it's not important but I have to remove to my request.

  Is it possible to completely remove the delay?

  Just for the record, my Vi contains two local variables, could that be the reason? Or perhaps because only a certain port timeout series?

  If you need to see the program, just tell me.

  Thanks in advance for your help.

  
  

• Real-time scanning and firewall disabled

  Every time I turn off my pc, the sacnning in real-time and the firewall are disable... and it happed after I purchsed online McFee, I used to have Panda Antivirus for Netbooks and used to work in perfect!

  I will never againg buy McAfee products, I told my two sister not to buy any product from McAfee for their pc... and I have already said that most of my friends not to buy no matter what McAfee Antivirus...

  .. .it really sucks...

  I recommend that you uninstall McAfee using the special removal tool: http://www.softpedia.com/get/Tweak/Uninstallers/McAfee-Consumer-Product-Removal-Tool.shtml (not just uninstall because it works well and you will have problems with the system itself, as well as with the installation of other products).  If you just bought it, it may still be in some kind of trial period and you may be able to get a refund if you have already paid for it (you should check with them on that).  Explain your problems, if necessary, and that you intend to report on blogs and everywhere you can and they may decide to make an exception if at first, they refuse to allow the return.

  Once done, reboot and you should now be able to re - activate the Windows Firewall. http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off Check to ensure that the parameters are still accurate that McAfee could change their.  If this isn't the case, after return and we will try to understand how they disabled so we can reactivate if the normal process does not work.

  Then, you need something to replace McAfee for AV / AM fine.  I recommend Microsoft Security Essentials for free at:http://www.softpedia.com/progDownload/Microsoft-Security-Essentials-Download-131683.html for analysis in real time on the daily basis and periodic analyses of rapid or complete.  I also suggest the free Malwarebytes to:http://www.malwarebytes.org/mbam.php don't not running constantly, but in order to update and do a full scan every few weeks or just to catch whatever it is, MSE could miss.  These two products are much better than McAfee and don't cause you problems that you had to deal with.  Here's what I use and I had no problem (and no infections that were not intercepted and completely removed by one or the other).  Either way, I used myself the Panda for several years before moving to the MSE and I have nothing bad to say about them - their product is very good - but why pay for something when there are free alternatives that are almost everything as good (maybe even better)?

  I hope this helps.

  Good luck.

  P.S. Be grateful it is McAfee and Norton not - so you could be even greater problems.

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error-307650 during a sequence in real-time with API LV

  I created a basic real-time sequence that checks the time it takes a signal reach a certain threshold.

  

  On the side of the LV, I use the API to call this sequence. I make sure that all channels and settings are defined as in the examples. However I get 307650 error that says "NEITHER VeriStand: Index was out of range." Must be non-negative and less than the size of the collection.

  ' Parameter name: index.

  Any suggestion to help here? THX. Code is attached.

  There are two problems here:

  1. The Stimulus profile editor is not indicating that there is an error with this sequence, although there is a. Note that the variable InitialTime is used in an expression, but is not declared as a parameter or a local variable.

  2. you get an error at runtime because of it, but it's not terribly useful (index out of range).

  You can fix this by adding a local variable of InitialTime to your sequence. I dropped the CAR 338386 about this bug.

  Once you do this, there is something extra, you will need to set in your VI which runs the sequence so he could get the results of the sequence properly. You use correctly the value of the sequence name to read the back of the sequence Variable. You use the Session name used during the deployment of the sequence. Which does not match the name sequence.

  To get the name of the sequence, use VI to get all the names sequence on your session profile of stimulus to get the array of names for all of the top level of the session sequences, then index on the first point, given that you only use a single sequence. Example below:

  

• Even after you remove AVG Internet Security 2012 on computer, Microsoft Security Center says its execution

  removal of avg internet security 2012 and Security Center microsoft says that it runs. Help plez

  You have disabled AVG before you run the removal tool?

  You will also be able to stop AVG by disabling startup items.

  To identify what loads when you start using Autoruns (freeware from Microsoft).
   http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig.

  Another useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.

• Microsoft Visual C ++ Runtime Library linked to Microsoft Security Essentials real-time program

  I started having problems a couple of weeks with my Microsoft Security Essentials. The program will start and say it could prove to be not on the real-time protection. This operation returned because the timeout period expired. When I click ok, I followed the instructions. Start services.msc, in search box type, then choose Microsoft Antimalware Service and make sure it is in automatic mode, then start the service. Sometimes it is and sometimes it still wouldn't start. Now, for a few days, when I'm trying to start windows, I get the following message: Microsoft Visual C ++ runtime library: this application has requested the execution in an unusual way. Please contact the team of management applications for more information. Once I get this message that I can't get beyond it. In fact, the only way I can boot into safe mode to remove the battery for a while and let it flow. If I didn't, then it starts to screen messages. Sometimes of safe mode, I'm able to turn on real protecion, shut down the computer, and it starts normally. Even if I have problems with MSE initially alone, 2 appear to be connected. As soon as the computer is put to sleep, breaks down on its own or stops that I'm back in power out of nowhere I had some restorations system. One who worked, the other has not, but no matter what I do, I can't keep the problem solved. Oh and when I tried to find information about Microsoft Visual... .the messages I read talked about the location displayed in this message. There is no location given when it happens on my computer. Any information would be greatly appreciated. Thank you very much for your time.

  A hard disk problem is preventing windows from starting, contact your computer manufacturer or system administrator to determine if you need repair or replace the disk... root cause found: bad hard drive.

  Unfortunately, it seems that you have a bad hard drive. I suggest that you start by replacing it and re-install Windows.

• Norton Internet Security 2011 - shows high utilization of the processor by Real Player.

  • I downloaded thousands of images on the web.
  • I have Real Player installed on my computer, but never use it.
  • I use Microsoft Picture It (2006) to change some of these images.
  • I just upgraded from Norton Inrernet Security 2010 to 2011.
  • I started receiving alerts of CPU high after installation of 2011.
  • I don't know if Norton I.S. 2010 was the CPU usage monitored if not then that would explain why I wasn't allerted in the past.
  • Norton Internet Security 2011 control CPU usage resulting in alerts.
  • Now that I'm aware of this abnormal situation, I realized that it must be resolved.
  • I wanted to remove the pictures of Real Player and keep them in "MY pictures", and then uninstall Real Player.
  • Once I have remove Real Player, they are deleted from "my pictures".
  • What do you suggest me to retrieve photos and maintain settings sure opperating regarding the CPU
  • It is an H.P. AMD X 64 Dual Core processor, Ram 3 GB, 600 GB HDD.
  • Any suggestions would be greatly appreciated, your will allow me to win a lot of sleepless nights and a ton of asperin.
  • Thank you

  Thank you for your time & consideration... Celestyna

  It is unlikely that RealPlayer is keep a copy separate from your photos. It is probably just reference your pictures folder. In this case, you can just uninstall RealPlayer.

  Everything you deleted must be in your Recycle Bin unless you have emptied. If this isn't the case, you can try this program freehttp://www.filehippo.com/download_recuva . The chances of getting them back are reduced more you use your computer.

  You should keep a copy of your data on an external hard drive. What would you do if your computer crashed or was stolen?

• Behavior of v$ standby_log; during the real time applies...

  Hello
  
  I would like to understand this point of view, during the REPEAT APPLY behavior or real-time applies by using configuration of log roll forward pending. as in my db, when there apply to progress, I see the status column having a CURRENT value and the column DBID value of Eve DBID where the application is underway then status column goes to UNASSIGNED value and DBID column has no value inside of it... i mean Virgin... Why is it so? Ask you please help me understand this... Here is the log
  
  SQL > select * from v$ standby_log;
  
  GROUP # DBID THREAD # SEQUENCE # BYTE BLOCKSIZE USED ARC STATUS FIRST_CHANGE # FIRST_TIM NEXT_CHANGE # NEXT_TIME LAST_CHANGE # LAST_TIME
  ---------- ---------------------------------------- ---------- ---------- ---------- ---------- ---------- --- ---------- ------------- --------- ------------ --------- ------------ ---------
  7. UNASSIGNED 1 0 104857600 512 0 NOT ASSIGNED NO.
  8 3903727333 1 58534 104857600 512 338944 YES ACTIVE 2.3217E + 10 5 JANUARY 12 2.3217E + 10 5 JANUARY 12 2.3217E + 10 JANUARY 5, 12
  9. UNASSIGNED 1 0 104857600 512 0 NOT ASSIGNED NO.
  10 3903727333 2 38929 104857600 512 235008 YES ACTIVE 2.3217E + 10 5 JANUARY 12 2.3217E + 10 5 JANUARY 12 2.3217E + 10 JANUARY 5, 12
  2. UNASSIGNED 11 0 104857600 512 0 NOT ASSIGNED NO.
  2. UNASSIGNED 12 0 104857600 512 0 NOT ASSIGNED NO.
  
  6 selected lines.
  
  SQL > /.
  
  GROUP # DBID THREAD # SEQUENCE # BYTE BLOCKSIZE USED ARC STATUS FIRST_CHANGE # FIRST_TIM NEXT_CHANGE # NEXT_TIME LAST_CHANGE # LAST_TIME
  ---------- ---------------------------------------- ---------- ---------- ---------- ---------- ---------- --- ---------- ------------- --------- ------------ --------- ------------ ---------
  7. UNASSIGNED 1 0 104857600 512 0 NOT ASSIGNED NO.
  8. UNASSIGNED 1 0 104857600 512 0 NOT ASSIGNED NO.
  9. UNASSIGNED 1 0 104857600 512 0 NOT ASSIGNED NO.
  2. UNASSIGNED 10 0 104857600 512 0 NOT ASSIGNED NO.
  2. UNASSIGNED 11 0 104857600 512 0 NOT ASSIGNED NO.
  12 3903727333 2 38931 104857600 512 5120 YES ACTIVE 2.3217E + 10 5 JANUARY 12 2.3217E + 10 5 JANUARY 12 2.3217E + 10 JANUARY 5, 12

  GROUP # DBID THREAD # SEQUENCE # BYTE BLOCKSIZE USED ARC STATUS FIRST_CHANGE # FIRST_TIM NEXT_CHANGE #.
  ----------
  7. UNASSIGNED 1 0 104857600 512 0 NOT ASSIGNED NO.
  8. UNASSIGNED 1 0 104857600 512 0 NOT ASSIGNED NO.
  9. UNASSIGNED 1 0 104857600 512 0 NOT ASSIGNED NO.
  2. UNASSIGNED 10 0 104857600 512 0 NOT ASSIGNED NO.
  2. UNASSIGNED 11 0 104857600 512 0 NOT ASSIGNED NO.
  12 3903727333 2 38931 104857600 512 5120 YES ACTIVE 2.3217E + 10 5 JANUARY 12 2.3217E + 10 5 JANUARY 12 2.3217E + 10 JANUARY 5, 12

  DBID would be here.
  These groups of waiting for redo log files can contain either the thread 1 or thread2, several threads are used in RAC environment.

  In general architecture, once if any log switch (or) redo log is full then they will be sent in files archive, then it will be assigned to new files redo log. here in the primary redo log file, you can see the current, active, inactive state so now.

  During the real time applies, every time that data written to the primary log files, the log of the time same writer will be active and which will be assigned to the redo log file... not redo log file, you have to say standby redo log waiting for database.

  average not assigned here, this standby redo log file, can be used for the next time, perhaps earlier status as 'active '. Each time standby redo log file is active DBID so only you can see.
  If its in unassigned it will be inactive, once again if any new allocation then it will become active. similar chain / loop. This is perfectly normal behavior.

  UNASSIGNED - online redo log has never been written for. It comes to the State of a newspaper of restoration by progression that has been added, or just after a RESETLOGS when it is not the log during recovery.
  ACTIVE - Log is active but is not the current journal. It is necessary for the recovery of the failure. It can be used to block recovery. It may or may not be archived.

  HTH.

• Why the new update disables my internet security?

  I use Kaspersky Total Security, and the update of Firefox says it has disabled because it is "unsigned".

  Completely separate Kaspersky anti-virus software installed on your Windows 7 is not affected in some way by the present and should still work normally.

  Kaspersky exact extension must be signed.

  A workaround to try for Firefox 43.0 until Kaspersky fixes their extension is type Subject: config in the address bar (address). Filter for xpinstall.signatures.required , and then double-click the preference, or click right and choose 'Toggle', for the false value.

• I have windows 7 and that you have not knowingly changed parameters. When I try to download something or play sims # I get a message that says your internet security setting preventing one or more files being opened.

  I have windows 7 and that you have not knowingly changed parameters. When I try to download something or play sims # I get a message that says your internet security setting preventing one or more files being opened.

  Hi facions.

  What browser do you use?

  If you use Internet Explorer, you can optimize Internet Explorer and check if the problem persists. For more information, follow this link: How to optimize Internet Explorer

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 0x800705b4 - microsoft security essentials - brochure-not able to activate real-time protection

  When I try to enable real-time protection in microsoft security databases the following error code appears 0x800705b4. If anyone can help? What am I, I guess what to do? My system is XP. Thank you.

  In these forums, you will find some support for Microsoft Security Essentials (MSE): http://answers.microsoft.com/en-us/protect/forum/mse

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Additional references may include:

  Checklist for installation of Microsoft Security Essentials
  http://experts.Windows.com/w/experts_wiki/89.aspx

  Can I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
  http://answers.Microsoft.com/thread/87058857-D181-4019-a723-efd9a49d9275

• Problem with disable real-time protection

  Security Essentials recently installed, off continually Protection in real time. When I try to turn it back on, I get the message: 'Security Essentials could not activate real-time Protection.' "" The operation is finished because the deadline has expired. "'Code 0x800705b4 error '.

  Can help you solve the problem please?

  Hello

  you will receive the correct help for your question of MSE MSE specific forums

  Use the link below to the repost here

  http://answers.Microsoft.com/en-us/protect