MacBook Air (early 2014) El Capitan impossible to install Windows using Boot Camp Assistant 10

Similar Questions

• SD not detected by the MacBook Air early 2014

  My MacBook Air early 2014 does not any activity when I put in my SanDisk Ultra 4 GB card in the card reader.

  I searched through further discussions, and I have already made sure I put on 'hard drive' on my Finder preferences, put the SD card to 100%, 90%, at halfway, I locked and unlocked and semi locked SD card... no activity at all.

  I need card SD since my camera is broken and I can't use my USB with one more.

  You are looking in the disk utility?

  You have another SD card to test with?

  The slot is maybe defective.

  Ciao.

• El Capitan and Windows 10 Boot Camp Assistant

  Hi, this is my first post so apologies if I've left out anything important. Let me know and I'll add the necessary details.

  Fast, I have been using Windows for years and I wanted to get into Apple and finally last month made the leap. I have a brand new MacBook Pro with 16 GB of RAM El Capitan - 10.11.4 running. However, I am having a lot of problems with the creation and installation of 10 Windows using Boot Camp.

  I had this work with Windows 10 times but made some fundamental mistakes. I resized the partition windows using a windows product so that I could add another partition. This seemed to work and I used it for a short time BUT when I tried to boot into El Capitan would not and that it would only boot Windows. After reading on what I see now that resize the windows from windows under Boot Camp partition is a no-no. lesson learned!

  To actually do things once again, I removed the windows partitions using disk utility. (Again I see now that it is an another no-no that I'd
  used Boot Camp Assistant to remove Windows!) Eventually however, I managed to get to El Capitan, working on the single partition, it is now again works fine and as far as I can tell without any problem.

  After having to go that if I went back to load 10 Windows using Boot Camp. All works until the final start in the section windows it:

  • Creates the separate windows partition
  • Load the ISO file
  • The Windows Support Tools downloads
  • Runs the ISO file and everything looks good... see below: (apologies for the poor quality of the screenshots)

  

  Then, during 'Finish Up', I get an error window:

  

  "Windows has no prepare the computer to start the next phase of the installation." To install Windows restart installation. »

  I tried many things such as to download the Windows ISO file again, running SNC and LANDAU after removing the Windows partition using Boot Camp Assistant and ensure that all other connections to the MBP is deleted except WiFi and get always the same message. As the whole process takes a few hours and tried to work through this for some days now, I would really appreciate some advice/help here for this issue very frustrating sorted.

  Thanks in advance

  Ian

  OSX backup via TM boot in the recovery of the Internet, erase your entire internal drive, restore the TM backup, run SMC/NVRAM reset and try to re - install W10.

  Your problem with remainders of W10 floating outside the Bootcamp partition, which cannot be properly cleaned when THE is used to delete a partition.

• Creating cloud apps on Windows (using Boot Camp on a Macbook) has stopped working

  So here's the situation:

  I've been subscribing to creative cloud (CC) for a few years now and I have the 'apps' installed on Windows (using Boot Camp on my Macbook Pro). Why is it I am running Windows on a Mac? Because for various reasons I ;-)

  A few months ago, I cancelled the subscription but decided to begin to subscribe again. That's when the problems started. Premiere Pro (which is the program I use most often) started to ask forlicensi ng/registration and registration from cc. whenever I started PP I to connect to CC with the result "Thank you for licensing/save...". "or something like that. The other day, I was in a meeting with a client to review changes in a project of PP and suddenly it does not help to to connect to CC. I am stuck in a loop where it says "thank you for the record...". "and then nothing happens. When I click on PP I sign again and so on...

  I called Adobe support and when I told them I'm using Boot Camp on a Mac the first guy said ' it is not supposed to work on Boot Camp or virtual machines and if it works it is probably due to a bug in the software '.

  
  

  I google a bit on this subject and can't find anything about supposed to CC to work with Boot Camp. When I was persistent and told them that they really help me because I'm in a hurry and that the customer is frustrated he actually hung. I called support again and this operator says 'We have no instructions on how to help users with problems in Boot Camp'.

  I tried PP uninstall and reinstall, but still get stuck in the Sign-in-loop. Could this something in the registry that I need to change or remove?

  I installed PP on my Mac OS without any problem. The thing is that I guess I can't open old projects created on the installation of Windows of PP.

  Any help on this would be much apprechiated.

  / Thomas

  Looks like the Support of Adobe has solved the problem. I called the third time and this operator is out of the box.

  I had to delete some folders (PCB Adobe, Cache SL, SL Store), and then start any application as administrator (Windows) and log in.

  Sweet!

• can I use mac os and windows os alternative to the model of macbook air early 2014

  Hello

  I have the macbook air 13 inch

  Series No C0 * 085

  I want to use both mac os and windows os alternately in my Mac... is this possible.

  < personal information under the direction of the host >

  Yes.

  (139862)

• Tap to click and three fingers slide no longer work after El Capitan update - MACBOOK AIR early 2014

  Things no longer work after the update are:

  1. TAP to click (I checked it on SYS PREF > TRACKPAD > tap-to-click)

  2 finger three windows

  3 Thre finger of several files and text selection.

  I have selected three fingers slide accessibility and options of the trackpad iv done 4 fingers to mision statement and app expose, but the problem is that these feature mission statement and the rest three fingers still work. :@

  It was just beautiful in yosemite please give a solution.

  Please read this message before doing anything.

  This procedure is a test, not a solution. Don't be disappointed when you find that nothing has changed after you complete it.

  Step 1

  The goal of this step is to determine if the problem is localized to your user account.

  Select the feedback connections* and log in as a guest. Do not use the Safari connection only 'user comments' created by 'find my Mac '.

  While signed in as a guest, you will have access to your documents or settings. Applications will behave as if you use them for the first time. Do not be alarmed by this behavior; It's normal. If you need any password or other personal information in order to complete the test, save, print, or write them before you start.

  Test while signed in as a guest. You have to re-create your trackpad settings. Same problem?

  After testing, log on to the guest account and in your own account, disable it if you wish. The files that you created in the guest account will be automatically deleted when you log out of it.

  * Note: If you have enabled 'find my Mac' or FileVault, then you cannot activate the guest account. The login 'User comments' created by 'Find my Mac' is not the same. Create a new account to test and delete it, including his home folder, after testing.

  Step 2

  The goal of this step is to determine if the problem is caused by changes in the system of third party that load automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Please take this step regardless of the results of step 1.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you normally connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of steps 1 and 2.

• Help on MacBook Air early 2014

  On my Mac:

  Running: OS X Version of Yosemite 10.10.5

  Processor: 1.7 GHz Intel Core i &

  Memory: 8 GB 1600 MHz DDR3

  Storage capacity: 120,14 GB

  Hey guys so recently my mac received a message saying that the startup disk is almost full.

  The problem is my apps, movies, photos, audio and backups add up to about 18 GB while the other has 97,58 GB I was wondering if there was a way to get rid of the things in the other with them mess up my computer. Because before you have a mac, I got a laptop Acer Windows 7 that when I went to reset the factory messed up and it had to be repaired. If I'm slightly hesitant to do a Factory Reset / Hard Reset on my mac.

  First of all understand what OTHER includes:

  https://support.Apple.com/en-us/HT202867

  Then download OmniDiskSweeper and Grand Perspective (both free) Internet and open them. They will show all your files and respective sizes. Transfer to an external HARD disk or remove files, that you no longer want on your MBP.

  Don't forget to empty the trash. Then only the space is allocated for the new data.

  https://www.OmniGroup.com/more

  http://grandperspectiv.sourceforge.NET/

  Ciao.

• End of 2011 MBP El Capitan Windows 7 Boot Camp without optical drive internal (LOSING MY MIND, Please HELP)

  What I have:

  • Original disc Windows 7 Pro from Microsoft as to
  • Downloaded ISO exact copy of Microsoft as well if need be
  • DVD player Samsung external optics
  • USB drive (s)

  What I don't have:

  • Optical drive internal and original; the Bay is empty.
  • Patience to use VM and WinClone and all that BS.

  Sorry for the harsh tone, but I'm losing my mind edition .plists and restart a hundred times a day. erasure of the USB drives when all this used to work years ago.

  I was sure it was possible to install Windows 7 on my MacBook Pro 2011 delay, an external optical drive. I not even asking to use a USB key.

  Why do I have all official records of Microsoft and a USB/DVD drive, but am forced to use an other intern, that is broken for like 90 percent of Mac owners.

  I see a black screen with a cursor on startup or a black screen saying no boot device... After using Boot Camp Assistant. I tried to not use the wizard and make a Fat32 partition on my USB on and implemented to date, but this method failed as well for some reason any illogical.

  Please help me or at least explain certain restrictions that I can never get about in what concerns my machine and Boot Camp.

  Thank you!

  Can you extract the the Samsung SATA connector and connect to the SATA internal optical drive connector?

  The EFI on your Mac version works partially with a USB Flash drive, but the file info.plist mounting is required. The VM/Winclone method also works.

• Error: "Windows could not update the configuration to start the computer. Installation cannot move forward"during the installation of Windows 8 64-bit OEM System Builder on Macbook Pro for help using Boot Camp

  Hello

  I have a brand new Macbook pro and I bought the OEM System Builder of 64-bit Windows 8 driver in a store. My problem is that I have not only not able to install it using Boot Camp. At the end of the installation, a message appears with the following text "Windows could not update the configuration to start the computer. Installation cannot continue.

  I'm not really a tech guy but I also tried to download virtual box and the same error comes back.

  Can someone help me please?

  Thank you!

  Original title: Windows 8 64-bit English OEM System Builder

  The thread is old now, but it is for those who always have this problem.

  When I got the error, I cancelled and restarted the machine. I pressed the 'option' button when starting upwards and he grew the boot partitions. You should see a 'EFI Boot' partition. Choose that and you restart the installation process, but this time it works.

  Supposedly the boot EFI and WinInstall partition should do the same thing. Manually, select one or the other.

• My iPhone 6 guard making his power on and off loading when it is connected with the MacBook Air early 2015

  Hi Please help me. My iPhone 6 retains what load noise when connected with my MacBook Air early 2015. It makes me crazy! I tried with several real Apple's USB cables, update to the latest iOS (phone and MacBook), updated the iTunes, clean the orifices, everything! I just got this MacBook on the Apple store. Please help me! Thanks in advance!

  Hi mikaelaridz,

  I understand that you just bought a MacBook Air in an Apple store, and when you plug your iPhone 6 in it, you are to hear a sound indicating that the connection does not work.  If your MacBook Air has a port USB - C, you must use the USB - C for Lightning cable to connect your iPhone.

  Using the USB - C port and adapters on your MacBook (retina, 12 inch, early 2015) and later

  Port USB - C

  USB - C is an industry standard generation that allows to load and transfer of video data - while a simple connector. Your MacBook comes with a USB - C port:

  

  Through this port, you can:

  • Charge your MacBook.
  • Power output.
  • Transfer data between your MacBook and other devices.
  • Connect the video output such as HDMI, VGA and DisplayPort.
  • Connect to other technologies, such as Ethernet.

  Port USB - C on your MacBook supports data transfer speeds to up to 5 Gbps (USB 3.1 Gen 1).

  USB - C for Lightning cable

  Apple USB-C for Lightning cable allows you to connect any device equipped with a connector of lightning with your MacBook. It provides data transfer and power of lighting fixtures. For example, you can use this cable to connect your MacBook to these devices:

  • iPhone, iPad and iPod touch
  • Magic Mouse 2
  • Magic keyboard
  • The Magic Trackpad 2

  You can also load these devices without using your MacBook by connecting to the C - USB to the lightning cable and plug the cable of the USB - C 29W power adapter.

  USB - C for Lightning cable supports data transfer at up to 5 Gbps (USB 3.1 Gen 1).

  This cable requires no power to operate. However, devices that you plug into it could draw power from your MacBook, you should unplug it when you're not using it.

  If this isn't the issue, then I suggest taking your new MacBook Air and iPhone at the Apple Storewhere you bought it.  A genius can inspect your computer for you, there is no hardware problems and staff can help you set up.  Here's how Contact Apple and make an appointment.

  Take care

• to restart my macbook air early 2015 in windows 8.1 to begin the installation it tells me that usb drivers could not be found, what should I do?

  to restart my macbook air early 2015 in windows 8.1 to begin the installation it tells me that usb drivers could not be found, what should I do?

  It downloads everything and restarts in windows 8.1, then when I click on install now a message pops up saying that miss me the disk drivers important that I don't know what to do

  This is an incorrect error message. Please post the exact error message or a screenshot of the error, if possible.

  See also no drivers were found and the reference to AppleSSD.sys.

• Use the MacBook Air as a second screen for iMac running Windows 10

  Hello

  is it possible to use my MacBook Air running El Capitan as a second screen to my iMac with 10 Windows under Boot Camp? I have to use the iMac for work and wants to extend the screen of my MacBook Air. I couldn't find solutions, as target display mode does not work in Boot Camp. Does anyone know an app solution or a third party for this?

  Thank you very much.

  Best,

  B.

  Please visit http://symless.com/synergy/ .

• Can I connect my MacBook Air to my Mac Mini so that I can use the display of the Mac Mini?

  Hi all

  Can I connect my MacBook Air to my Mac Mini so that I can use the display of the Mac Mini?

  The Mac Mini is the end of 2014 with 2 ports thunderbolt model and is connected to a mini display port monitor.

  I'm just fed up of having to pull on the cable of the Mac Mini to connect the MacBook Air.

  Any ideas? Suggestions?

  Thanks in advance!

  Using the built-in screen sharing are an application like:

  ScreenRecycler

  Only some iMacs support the target Display Mode

  Use your iMac as a display with the target - Apple Support Display Mode

• I use photoshop elements 12 on Macbook air and the screen freezes when I try to use the tools. Then I have to force quit if I lose my job. someone knows how to fix this?

  I use photoshop elements 12 on Macbook air and the screen freezes when I try to use the tools. Then I have to force quit if I lose my job. someone knows how to fix this?

  What version of Mac OS X are you using? If the Yosemite, you will need to upgrade to 10.10.1 or higher version.

  In any case, start by going in the editor preferences > general, click this button and the restart of the Editor:

  

• I reformatted my Macbook Pro (13', mid-2012). I want to use Boot Camp to create a partition for use Win 7 I had previously and have drives. Then go to Win 10. Where should I start?

  I reformatted my Macbook Pro (13', mid-2012). I want to use Boot Camp to create a partition for the use of Win 7, I had previously, and have records. Then go to Win 10. Where should I start?

  You can start here

  Use Bootcamp to install Windows