MacBook Air meets does not to the clicks of the mouse or trackpad

Similar Questions

• I spilled coffee on my Macbook Air and does not illuminate.  How to transfer files from the external hard drive to backup my new Macbook Air?

  I spilled coffee on my Macbook Air and does not illuminate.  How to transfer files from the external hard drive to backup my new Macbook Air?

  If you had a Time Machine backup, you can use the Migration Wizard and connect your new Mac on the external drive which has the Time Machine backup: move your content to a new Mac - Apple Support

• Qosmio G does not recognize the mouse using two left USB ports

  I'm right handed so I naturally put my optical mouse Saitec in the port of the right hand.

  The other day I plugged it in the ports of the two left hand and the machine did not recognize the mouse.
  He went through the process of installing the drivers (even if it was done a few weeks ago, when I plugged in the port of the right hand)

  In any case the mouse doesn't at all plugged into ports on the left side.

  Does anyone have any ideas as to why what is happening?
  Look of Sean.

  Hello

  Have you tested the two left with other USB devices USB ports. That is to say USB flash stick?
  Maybe you should do this to see if it could be a defective USP port.

  But I recommend to test this;
  First disconnect all USB devices
  Then go into the Device Manager and all the USB host controller and hubs USB remove from the list of devices.
  Close all windows and restart the laptop.

  Finally the operating system should recognize the new devices (USB ports) again.
  Connect a USB device to one of the ports on the left and check if it would work.

  Good bye

  PS: What Qosmio do you have?

• MacBook Air keyboard does not properly

  My MacBook Air keyboard types the front slash after I typed the letters L, O and the period. Then he begins typing the non-stop before slash.  I can stop it for a second when I type a different letter, but it again immediately.  I pressed on the ' | '. "-" button and it does nothing.

  so here's what my notes at this moment look like

  Jul\\\\\\\\\\\\\\\\\\\\\\\y\\\\\\\\\

  Two\\\ half was. \\\

  stop. \\\

  my macbook was purchased in September of 2015 and I had this same problem in December... but I somehow managed to do stop. I never gave up, he left in the car or dropped/spilled something on it or around it.

  This problem occurs with me signing my password in unlock MacBook, my school work and my general purpose.  can someone help me?

  Hi, take a look at this article, maybe this will help you If your Apple wireless mouse, keyboard or trackpad is not working as expected - Apple Support

• MacBook Air battery does not load after resetting SMC

  

  Hi all, hope you can help me with this. My model of Macbook Air early 2014 seems to have some problems with its battery. The battery status says "do not load" and it is stuck at 74%. My charger light is still red and I tried to check the status of the battery, it is said to be normal; also I have reset the SMC and all that stuff that is suggested on the discussion Forum, but still it is of no use. Someone had a similar problem before?

  Try resetting the SMC two times more.

  If this does not help, please contact Apple support.

  https://support.Apple.com/contact

• I have a MacBook, and itunes does not read the cd, the track or album titles.

  I have a MacBook Pro and when I try to import a music CD into my iTunes library, iTunes not read the album or track titles.  I've seen other messages on re - install iTunes, problems with Gracenote and be connected to the internet.  My computer is connected to the internet and Gracenote is still not read the CD.  Is there a solution for this other than to manually enter the tracks on the album and track names?

  It is a commercially available original CD?

• Windows does not properly, the mouse automatically move

  I have problems with my computer, possibly malware.

  System information:

  Name of the operating system Microsoft Windows 7 Home Premium
  Version 6.1.7601 Service Pack 1 Build 7601
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  Name of the system
  System manufacturer Hewlett-Packard
  HP Pavilion dm4 Notebook PC model system
  System Type x 64-based PC
  Processor Intel (r) Core i5 - 2410M to 2.30 GHz, 2301 Mhz, 2 Lossnay, 4 logical processors
  BIOS Version/Date Hewlett-Packard F.17, 25/01/2013
  SMBIOS Version 2.7
  Windows directory C:\Windows
  System directory C:\Windows\system32

  Boot Device \Device\HarddiskVolume1
  The local United States
  Hardware Abstraction Layer Version = "6.1.7601.17514".
  Username
  Time zone Eastern Standard Time
  Physical memory (RAM) installed 6,00 GB
  5.95 GB total physical memory
  3.64 GB available physical memory
  11.9 GB total virtual memory
  9.64 GB available virtual memory
  Page file space 5.95 GB
  Paging file C:\pagefile.sys

  Hardware seems to be fine, at first I thought it was just that don't meet liked due to overheating of the computer, but I have already fixed the fan and problems are still occurring. Now, I ran MRT and nothing comes, as well as malwarebytes. Still nothing.

  When I turn on the computer - it works very well for a few minutes and then it starts to lock up, but the mouse still moves. The screen starts then say "not responding", but it will eventually kick back to normal for a second. If I type, I can get 3 or 4 words and the computer hangs (then unlocks) and he repeated this until I have just decide to stop doing anything on the computer.

  Hello Mr.Will,

  Thanks for posting your query in Microsoft Community Forum.

  You did it any significant hardware or change software on the computer before this problem?

  I would suggest trying the following methods and check if the problem persists:

  Method 1:

  Step 1: Try to start your system in a State of services necessary to the operation and a minimal set of drivers, active Mode without failure.
  Start your computer in safe mode: http://Windows.Microsoft.com/en-in/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  Step 2: If the system works fine in safe mode, try to clean the system startup:

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to reset the computer to start as usual after a repair.

  Method 2:

  You can run a Microsoft Security Scanner to make sure that the computer is free of infections:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  
  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• USB and ext.hd does not, but the mouse is?

  Windows Edition home premium 2
  Acer aspire 5930 portable

  A few days ago I tried to connect an old usb that worked for 2 weeks with no problems... The computer says there was an error on the disk, then windows Explorer froze and had to reboot.  Later I "fixed" error, after many gels, but still the usb wouldn't work.  I ended up formatting the disk.  Although a still takes a long time to open and recognize the usb, windows Explorer.  My mouse is very well (connected to a port targus 4usb thing), my printer is fine.  All my usb and hard drives refuse to connect to the computer.  USB device manager says they are all "unrecognized devices" yet less than a week ago that they were all works well without any problem.

  Usb had some .f90 (fortran) files relating to certain University evaluations, excel (including some activated macro for vma), power point, word, and pdf files.
  It seems that all of my USB with fortran files most of the problems, but they all had some one way or another.

  before you say MY FILES to UPDATE... ILS ALL ARE updated TO THE FULL they may be... This is what I did the last few days.  In addition, as I'm using a proxy, this auditor boring device DOES NOT WORK on my computer.

  Also when I try to format or delete the files from fortran, it comes up with the error:
  0x8007045D i/o device error
  any ideas?

  Thanks in advance

  Hi Alexander,.

  1. what format did you try? What is a NTFS format?

  Since it is a recent issue, you can try to perform a restore of the system to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

  Hope this information is useful.

• Computer suddenly does not recognize the mouse.

  Mouse frozen earlier this evening. Tried to reboot the computer, but the mouse icon is stuck on the same position on the screen. I tried two other mice, USB connection or wireless all plugged into several USB ports. USB power lasers on mice, but there is no movement for the icon. Any help would be appreciated.

  Try a PS/2 mouse.

  Also, make sure that the other devices (except the mouse) on this port works fine or not?

  S.Chatterjee

• My Toshiba does not detect the mouse

  I just bought a Toshiba Satellite L55Dt A5254 part # PSKM2U - 004 00D. I'm having trouble installing my Microsoft Bluetooth Notebook Mouse 5000.  I tried all suggested fixes found in troubleshooting, but can't always understand what is happening.  I am connected to internet & Bluetooth is on, the mouse is turned on.  Operating system is Windows 8.

  Hi Panchot,

  Here are a few articles that provides some troubleshooting steps to resolve these issues:

   

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398/en-us

   

  Connect a Bluetooth device that are neither require a TRANSCEIVER

  http://support.Microsoft.com/kb/952818/en-us

  Do get back to us and let us know the State of the question in the case where you need further help or your next post. We, at tender Microsoft to excellence.

• I bought a camera that came with Photoshop Elements. At the time, I didn't have my own computer to install it (using the CD) but now I have a computer (a Macbook Air) that does not have a CD player and I can't download the disc. Is it possible for me

  Help?

  You can download at the bottom of the link:

  Download Photoshop Elements products | 10, 11, 12, 13

• MacBook Air 11 '' does not turn on or charge

  So here's my problem, I was using the macbook and I decided to close it and then fell asleep. On the next day, I opened it and try to use it, but he never responded. I thought that the battery is dead so I plugged in the charger and discover that the light never went. I was scared so I watched some videos about it and found that I just need to disconnect the battery, turn on without the battery but the charger plugged in, and close it down and put the battery, but who did not work at all. I also discovered that the charger light would come if I just used the charger on another macbook, any ideas on what to do?

  PD: Sorry if I have errors of grammar, I'm not a native English speaker

  Hello

  Your grammar is very good!

  Try the troubleshooting steps in this article to support > If your Mac will not turn on - Apple Support

• MacBook Pro 2007 Does not show the headset as an output option

  Hi all, I have recently restored a MacBook Pro 2007 for my college work and it works well... Except for one thing. The wearing of the helmet.

  I wish I could use my headphone port that I will do a Final Cut Pro here job and likely to spend much time in the classroom when playing audio through the built-in speakers will be disruptive.

  I've already replaced the left i/o board with a working version (as the previous owner had neglected it and broke a record in there.) Villain...

  If you're wondering, the computer is currently running El Capitan and it seems it well, apart from the question with the headphone jack. I searched in Google for this issue, and most of them seem to be much easier to solve because their use of the helmet IS shown in system preferences, while mine is not. A little weird issues really, especially as the line works perfectly fine! Just not the headphone port...

  If anyone can spare a moment to help me with this issue, I would greatly appreciate your help. I love my MBP. So, I want it to work as it should.

  Thank you very much

  Problem solved! A problem with the IO card. I've fixed since the question and making works normally.

• MacBook Pro 2010 does not recognize the (formatted) SSD

  Hello

  I saw a lot of topics on it and did some background reading. But in short, a 13 "middle MBP 2010 is simply show folder-question mark icon when starting after having inserted a 850 EVO Samsung newly formatted (option + cmd + r to try to start internet recovery mode and do a clean install of holding).

  I tried to solve problems using other my Macbook Pro (a model 15 mid-2010 ")-Exchange the SSD back between the two machines, and I get different behavior which is what is so confusing.

  The steps I have taken to date include:

  -Insert the (unformatted) SSD in 13 "MBP. Hold down cmd + option + r download icon question mark.

  -Insert the (unformatted) SSD in MBP 15 ". Hold down cmd + option + r. get starts in the recovery of the internet where I could format the drive!

  -Replace the (newly formatted) SSD in 13 ". Hold down cmd + option + r. Yet once the icon question mark.

  To make sure that I was not screw up internals I put the old hard drive back in 13 "and he started very well. It's a relief at least.

  So I'm at this stage. Someone please correct me if my reasoning is wrong...

  -He's not the SSD because my model 15 "it recognizes and plays well.

  -It has No internal features of the computer, because it always starts on the old HD when I reinserted it.

  -He could be the SATA cable. (I tried to change place than my 15 "model, but the orientation is different and I didn't take the risk of rupture of the cable).

  -It could be a PEBKAC

  In the meantime I'll install a clean version on the operating system on the new drive while it is in the MBP 15 "work. Then, I'll try once more. But I don't hold any hope as the 13 "MBP doesn't recognize the SSD when would be the model 15".

  This is the model 13 '

  Thisis the model 15 "

  Any help at all is greatly appreciated. Thanks in advance!

  You probably replace the SATA cable in the MBP 13 ".  This phenomenon has been reported several times on these forums.  An SSD will start the MBP externally but not internally, and the original HARD drive will start the MBP even internally.  A new SATA cable solved the problem.

  I do not offer a 100% guarantee, but I suspect that the chances are good.

  Ciao.

• MacBook Air safari does not work correctly

  When I open safari it some time won't let me type and most of the time it wont let me get anything, it remains just a white screen when I press on enter. If I can get on a page that the url in the search bar it looks like there are two URLS sometimes overlap. Anyone got any suggestions?

  Thank you

  It should be fixed now.

  Otherwise:

  OS X

  iOS

  Workaround for problems with the Safari address bar

  http://osxdaily.com/2016/01/05/fix-Safari-freezing-address-bar-use/