MacBook air only 8 months. Fan of work strongly and draining the battery. Do you have any troubleshooting. Pls help.

Similar Questions

• (Redirected) Reference DELL 5547 Fan starts while that closed down and drains the battery at 0%, especially may not wake from sleep

  Hello

  When I turn off my laptop the fan starts to spin then and during a night, it drains the battery from 100% to 0. I also have some problems of marketing. If the computer is in sleep mode itself or by me, I can't wake up, need button for 10 seconds and then push again and it starts. When turned on, it works perfectly but has these problems. I read somewhere that the resolution of these problems has been to remove the software intel from my computer and I did. It helped but 2 days computer started having these problems again. My system is Windows 7 64 bit. This problem started after that I have somehow left fully charged computer asleep on the charger for about 2 hours. When I came back fan was spinning and the right side of the laptop was hot. Again, battery life is great and computer has no defects during the work (all tests by dell are passed). What can you suggest me to do?

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• computer falls asleep and only wake him up is to disconnect and remove the battery and it will come back, and then reinsert the battery it's a dell

  My computer is asleep and won't wake up. If I unplug the unit and remove the battery, it will be ok. Then

  I can reinstall the battery. It's a dell intel Insider core 13

  Hi Jim,.

   

  This problem may occur because of low battery or power problems. Please follow the instructions to solve the problem:
   
  Refer to the suggestion of Leo Huang dated Tuesday, September 14, 2010 09:01
   
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/0866de60-A16B-41c4-8a6e-b56c848478f3
   
  Let us know the result. If the problem is still not resolved, we will be happy to help you further.

• I use my MacBook Air as a desktop computer. Should I leave the charger plugged all the time or should I drain the battery and then recharge? What is the best for the battery?

  I use my MacBook Air as a desktop computer. Should I leave the charger plugged all the time or should I drain the battery and then recharge? What is the best for the battery?

  Keep the computer plugged in whenever possible.

  If you keep the computer always connected, make sure that at least twice a month

  Run it on battery until battery charge level falls to about 40-50%.

  Please don't completely discharge the battery. Discharge the battery completely will reduce wear and tear on the battery.

  For more information:

  Section: To optimize the battery life

  http://support.Apple.com/en-us/HT204054

  Citing at the bottom of the linked article.

  "The question is often asked:" should I disconnect my laptop from the mains when not in service? Under normal circumstances it should not be necessary because as soon as the lithium-ion battery is full, a properly functioning charger will stop the load and load the pad will only engage when the battery voltage drops to a low level. Most of the users do not remove AC power, and this practice is safe. »

  http://BatteryUniversity.com/learn/article/bu_808c_what_the_user_can_do

• Can I connect my MacBook Air to my Mac Mini so that I can use the display of the Mac Mini?

  Hi all

  Can I connect my MacBook Air to my Mac Mini so that I can use the display of the Mac Mini?

  The Mac Mini is the end of 2014 with 2 ports thunderbolt model and is connected to a mini display port monitor.

  I'm just fed up of having to pull on the cable of the Mac Mini to connect the MacBook Air.

  Any ideas? Suggestions?

  Thanks in advance!

  Using the built-in screen sharing are an application like:

  ScreenRecycler

  Only some iMacs support the target Display Mode

  Use your iMac as a display with the target - Apple Support Display Mode

• How to eject my iphone, or player card on my macbook air?  I don't want to disconnect and lose data...

  How to eject my iphone, or player card on my macbook air?  I don't want to disconnect and lose data...

  You won't lose data when you remove an iPhone, unless you're in the middle of the backup or synchronization of the device.

  If you see no activity in iTunes/Photos/etc... Then, it is safe to unplug.

  With a card reader (SD card?) you do drag the desktop icon to the trash. It turns into an arrow when you drag an icon ejector.

  Similarly, you can click Finder on the dock, then locate the reader on the left column and click on the "arrow" to the right of the device to eject it.

• How can I fix a black and white screen on the air from my iPad? I rebooted it and ran the last updated IOS 9.2 on it. It is stuck and won't return to the color. All other functions work except this.

  How can I fix a black and white screen on the air from my iPad? I rebooted it and ran the last updated IOS 9.2 on it. It is stuck and won't return to the color. All other functions work except this.

  Have you checked the settings > General > accessibility > greyscale > power off.

  If this does not work ty settings > General > accessibility > zoom > on. Triple, tap the screen with three fingers. Tap choose filter. Click None. Triple, tap the screen to get rid of the menu zoom. If you have enabled greyscale in zoom you can disable it in zoom.

• Why was asked to enter a serial number for Acrobat Standard when I am only a monthly subscriber? I can't activate the product.

  Why was asked to enter a serial number for Acrobat Standard when I am only a monthly subscriber? I can't activate the product.

  After I sign up with e-mail address and password, I wonder also enter a serial number which I did not have...

  Hello

  In order to activate the product should obtain the following option: -.

  -Use the trial subscription or

  -J' have a serial number

  Please select the option - use of the trial or subscription, and then click next - restart Acrobat and sign in with your Adobe ID

  In addition, you can view the following for more information on activation problems:- Activation & deactivation help

  Kind regards

  Mohamed

• My Fire Fox download video in support not detected on you tube. It is always shows only the first video that i was downloaded.pls help

  My Fire Fox download video in support not detected on you tube. It is always shows only the first video that i was downloaded.pls help

  I don't think there is much you can do about it outside the use of workaround to reload the page until this problem is corrected.

  There is this bug on this problem:

  • http://Bugzilla.DownloadHelper.NET:8080 / show_bug.cgi? id = 642

  I don't know if other extensions download suffer from this issue, as well, so you can try a little more try the website of the add-on and if possible use a different format like WebM, if they are available.

  Also note that not all videos are downloaded and registered correctly. Some may have a size of 0 bytes and fail to download, so, best is to check in downloads of the toolbar Manager in the drop-down list to make sure that the file size is correct (i.e. neither 0 bytes, but a more likely size).

  YouTube streaming makes changes to the code and the way its web pages work, so extensions can fail at any time.

• Reorganize work plans and move the work hidden with both work plan?

  Is it possible to use the option to "Reorganize the work plans" in the dropdown to work plans and also the movement not only the plan of work itself, but also the hidden work (layers, objects, etc.) on this work plan?

  I tried marking check the option 'move illustration with work plan' , but that still does not move the hidden work. The default behavior seems to be that only the active or visible work is moved with the artboard, but the work of hiddden is left behind somewhere on the workspace where the work plan used to be before it was moved.

  I find it a little heavy, because I often hide work that I test and have to do all visible again to move them just with the artboard would break the dinstinction between all many very similar layers, objects, etc. that I could work with at any given time.

  If anyone has some advice please chime...

  Hahaha... your memory is better that an elephant Kurt, but remember that I already have this script of cardiac arrest?

  http://forums.Adobe.com/message/5666490#5666490

• "Windows 7 Home Premium SP1 64-bit, an error message indicates" the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade.

  Tried using Windows Anytime Upgrade. Bought at Staples have product key is entered correctly. "Following instructions, accepted USA get error message says ' the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

  Which edition of Windows 7 is installed on the machine?

  Which edition of Windows 7 you are trying to do an Express upgrade to?

  Please note that the Express upgrade does not support OEM, MSDN-Academic, Volume (the student faculty licenses) license. If you are in possession of all these brackets, you will need to save and do a custom clean install. If you want to do it, please backup your Windows 7 Home Premium or according to edition currently installed. Some licenses for Windows distributed to tertiary level students are not perpetual, which means that you cannot continue to use the software after a course or graduating.

  ---------------------

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• I paid creative cloud. I need first. But I had a month of trial version. And now the money from an account has been removed automatically, but I do not have first. What can I do?

  I paid creative cloud. I need first. But I had a month of trial version. And now the money from an account has been removed automatically, but I do not have first. What can I do?

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -If you have more than one email, but of course you use linked to your subscription

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

• Reinstall photoshop on a macbook air only got cd

  Need help to reinstall Photoshop elements on my new macbook air 11. Only, I bought the cd version... what to do?

  Try to download the trial version.  Your serial number should work with it.

• Why my MacBook Air only recognizes all other pages when I try to print pages?

  I have a MacBook Air. Recently, when I typed a letter page 6 pages and tried to print from files, print, it only showed that I had 3 pages, while in the Pages document, I got 6 pages. The computer would print only 3 pages on 6. I did have this problem in the past, most recently. I don't know what I can do about it. He seems not to recognize that all of the other pages. It is not my printer. That's what the MacBook Air shows when I select Print. Only 3 of the 6 pages, even pages shows all 6 pages.

  Any thoughts on how to solve this problem?

  Be more specific.

  It show 3 successive pages or only odd or even?

  If it is the latter which is a parameter in the dialog box print which may be saved as a preset.

  Peter

• MacBook Air 13 inch noisy fan?

  Hello, I recently bought a MacBook Air 13 inch (early 2014) and the fan was loud and goes at full speed! The computer is not hot at all, its just goes to full speed please help ASAP!

  It is a user's computer, Yes? You clean the disk in order to install your own copy of OS X and your own software or you use OS X that came on the computer of the seller? I'm guessing that the latter, see also: Runaway applications can shorten the battery life, affect performance, and increase of heat and fan Act... and,

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.