Macbook Air using with mouse, keyboard, and external display?

Similar Questions

• I have the model of macbook air 2016 with i5 Professor and 8 GB ram... since it's the fastest ssd, but I have not seen all speeds up to now, I want to say is bcz I need to have usb 3.0 USB key or hard drive to see the speed of the ssd to usb 2.0 will work

  I have the model of macbook air 2016 with i5 Professor and 8 GB ram... since it's the fastest ssd, but I have not seen all speeds up to now, I want to say is bcz I need to have usb 3.0 USB key or hard drive to see the speed of the ssd to usb 2.0 will work

  What do you mean, your message is not clear.

• My mouse pointer moves in the opposite direction, I intend when I use the touchpad on my laptop. It works fine when I use my docking station and external mouse. How can I fix it?

  I'm using Windows Vista with a Sony Vaio laptop.  At the office, I have a docking station with keyboard and external mouse.  Everything works fine with this Setup.  But when I unplug the docking station and use the touchpad on the laptop, my mouse pointer moves in the opposite direction, that is my intention.  I move my finger and the pointer down.  I move to the right and the pointer goes left.  How can I fix?

  Go to start /Control Panel, and then double-click the icon '' mouse. '' When this window opens, select the tab "Touch Pad" at the top. There's a box near the bottom called "Touch sensitivity", click on that. Change the settings a little bit lower than what they are currently at.

• My Macbook Air uses El Capitan 10.11.5. This operating system repeatedly freezes and the computer must be turned on / repeatedly.  How to solve this problem?

  My Macbook Air uses El Capitan 10.11.5. This operating system repeatedly freezes and the computer must be turned on / repeatedly.  How to solve this problem?

  Hello

  Check if the hard disk needs repair.

  Open the disk utility, located app in HD > Applications > utilities

  Select Macintosh HD on the left then click the first aid tab, and then click Run.

• standard Gmail view does not load on MacBook Air, loads fine on iMac and MacBook

  can only load in HTML view. Use the standard display on other computers on the same network. The MacBook Air only charge about 80% and goes no further.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• How to change the mouse keyboard and mouse wireless in one click?

  Original title: How can I change the mouse to a single click? more it is difficult for an older person with arthritis.

  I would change the mouse keyboard and mouse wireless in one click. I have windows7. with windows xp, it was part of the accessibility options, but I can't find this option now. Any help would be appreciated. Thank you

  Hi knufyn,

  I certainly understand your concern and I will be happy to provide the steps to check if we can change the settings click on the mouse.

  Let us, perform the following steps and check if you are able to change mouse click settings.

  By default, the mouse is configured to use the double-click to open an item (single click to select) in Windows 7. To configure the mouse to use the single-click to open an item (point to select) setting, follow these steps

  un) Click Start

  (b) type appearance and personalization in the start search box, and then click appearance and personalization in the list programs.

  Note: If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  c) in appearance and personalization, click on Folder Options.

  d) in the general tab, click single-click to open an item (point to point)

  (e) click apply and click OK.

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• How can I disable the mouse pad when you use a mouse plug-and-play?

  How can I disable the mouse pad when you use a mouse plug-and-play? I tried to disable the driver, and nothing works.

  Hello

  Check with support of the manufacturer system, documentation online or forums that there is probably
  Shortcut keys that enable and disable the touchpad functions.

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
  and some come with a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• My grandson was playing with the keyboard and all my icons and web pages are now huge. I had this happen before, but I can't remember how to reset it. Any help?

  My grandson was playing with the keyboard and all my icons and web pages are now huge. I had this happen before, but I can't remember how to reset it. Any help? I went through properties and all that it is fine. It has something to do with the keyboard and an F key and control or ALT.

  Hi Sashaxwp,

  To get small icons in your Start menu

  Click Start on the taskbar, and then select Properties from the context menu.
  Ensure that the selected option of Start Menu as ist and click Customize to the right of the Start Menu option.
  This will display the Customize Start Menu dialog box.
  Use the Option Select an icon of Sice to Programms and now select small icons

  To configure your display appearance, wants to get small icons on your desktop

  Right click on an open area of the desktop and select Properties.
  Click the appearance tab.
  Click on 'effects' (in my Version of XP in German), perhaps you will need to click on Advanced.

  In my XP there is a "huge symbols" choice, if you have this choice, remove the hook.

  Good luck and have a nice day!

  Kind regards

  Rainer

• Is it possible to upgrade SSD on my MacBook Air (13 inches early 2015) and how much it will cost?

  Is it possible to upgrade SSD on my MacBook Air (13 inches early 2015) and how much it will cost?

  Yes, you can upgrade your MacBook Air SSD.

  https://eShop.MacSales.com/shop/SSD/OWC/MacBook-Air/2013-2014-2015

• Cannot download sony HDCam to use with movie maker and make a simple Assembly.

  Cannot download sony HDCam to use with movie maker and make a simple Assembly. can not download the olympus still digital cam video to use in a simple Assembly.

  Hello

  1. are you not able to import files into Windows Movie Maker, or transfer the files on the computer from the devices themselves?
  2. What is the format of the files you want to import into Windows Movie Maker?

  Check if the help of this article.

  Problems with importing files into Windows Movie Maker.
  http://Windows.Microsoft.com/en-us/Windows-Vista/problems-importing-files-into-Windows-Movie-Maker

• I want to hang the Tower up to my big screen and instead of using a keyboard, I bind a tablet that I can use as a keyboard and to manipulate objects on the screen in real time

  I am in the middle of do a remodeling and think about a furture upgrade my PC at home, I want to hang the Tower up to my big screen and instead of using a keyboard, I want to connect a tablet that I can use as a keyboard and to manipulate objects on the screen in real time. Is there a way to do this?

  (1) before the PC upgrade, please read the complete technical documents for all devices

  you want to go to upgrade

  (2) it is the first thing to do to make complete lists of materials you want to change.

  Compare specifications detaily, note important diference between many of the same features

  (3) for more information on some devices and materials, see link below

  http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/home?language=en-us

• I use a Belgian keyboard and the CAPS of SHIFT or alt + tilde do not work for me

  Hi I have a similar problem: I use a Belgian keyboard and the CAPS of SHIFT or alt + tilde do not work for me. I can configure default Hiragana in the locale, but it is not honored - lights in romaji and I have to click the icon pon :-(

  I feel bad: I bought the expensive 'Ultimate' version of Windows to use it for the Japanese language, then I discovered that Microsoft IME is unusable. I can't click an icon all five words, I need the default to work as configured and shortcuts too (and I'm not the only one, a lot of people write Japanese under Windows I guess)

  Research in other forums, this seems to be a known gene since Windows XPand still not been resolved in Windows 7? I hope it's in Windows 8.

  I'm ready to upgrade to 8 or modify registry settings, install additional DLLs or something else, but I feel it too bad if I install a linux to be able to do what I bought Ultimate for :-(((

  Split from here:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/changing-Microsoft-IME-language-input-default-it/a63cf759-d665-48b1-93fb-90d4a2d6cb72?page=2#footer

  Hello

  I suggest you to send your comments to the following Web site.

  Give us your comments for Windows 7

  http://support.Microsoft.com/common/survey.aspx?scid=sw%3ben-us%3b2310&altStyle=MFE&renderOption=OverrideDefault&showPage=1&FR=1&nofrbrand=1

• I have the plan which covers computers, do I need to change my MacBook Air to my mac Mini. and I already installed it on my iMac. How can I do?

  I have the plan which covers computers, do I need to change my MacBook Air to my mac Mini. and I already installed it on my iMac. How can I do?

  Hi Lena,.

  Certainly, you can transfer your products from one machine to the other. All you have to do before transferring them is launch the application, go to the Help menu and disable the application.

  Once the application is disabled, then you can follow the article: download and install Adobe Creative Cloud apps that will help you to install the application on machine 2 of yours.

  Let us know if you have still any confusion around this.

  Thank you

  Yann Arora

• For the iPad 2 air, what is the best app for note taking allows you to use a removable keyboard and a stylus? Which is also a stylus good to use?

  I am looking to buy an iPad 2 air to take notes in college classes and I was wondering what is a good software that allows an external keyboard (like a laptop) to type notes and also allows the drawing with a stylus? What is a good pen that is compatible with the app and the iPad 2 air?

  If you really want to use stylus to take notes or draw you should go for iPad Pro with Apple pencil. Nothing else offers good experience especially for hand writing. If you ok with drawing then only pencil FiftyThree is a good choice on iPad 2 Air (but again, it is much worse in my opinion, then iPad Pro + Apple pencil). FiftyThree is also one of the best (paper) apps for note taking (and it works well with their pencil).

  The keyboards are wide work system and not a dependent application. You can go for any model of the 3rd party like you which is compatible with iPad air 2. Advice covers the Apple Smart keyboard are specific to the Pro (they need specific for Pro iPad connector).

• System Restore with the keyboard and the mouse works do not and do not know admin password

  I recently decided to update my drivers on my 9 year old bridge. Apparently the program that I used to do didn't realize a bad driver when he sees... Sort of my keyboard and mouse not responding while windows was loaded. They work enough for me to access the bios, enter the menu start and also when I hit enter to boot from a windows cd.
  I'm trying to access my restore points to get rid of the driver that has been installed. Unfortunately when I put the windows CD and try the repair option I can't log on to the volume because it requires an administrator password. I tried Admin admin admin admin and leave blank. I even ran a program to reset passwords (I do not use any which way.) still cannot log on to the volume. I also tried to pass in front of the screen to repair and installation of windows to fix this. I can hit escape and pgup and pgdown but not f8 to agree to the agreement.
  When I boot in safe mode with command prompt that it still forces me to click on an account to connect. Which I can't because the keyboard and the mouse do not work when windows is loaded.
  I can't get to the command prompt to display the box to help restore points?

  Hello

  ·         Did you do changes on the computer before the show?

  I suggest you to follow the steps in the article in the Microsoft Knowledge Base and check if it helps.

   

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545

  Regarding the password administrator there are chances that you must have defined and now you don't remember or if the bridge keep some default password. You can also contact the Support Technology Gateway for help on the issue.

  Technical support Gateway

  http://support.gateway.com/us/en/support/default.aspx

  Hope this information helps.