MacBook / J4580 All in One / software Parallels - does not PRINT - HELP Please

Similar Questions

• HP Photosmart C4200 all - in-one series. Does not print because the undetected alignment page.

  Does not print not because Error Message "alignment Page not detected."  Thanks Chaso

  can someone reply to my message number 5, thank you. Chaso.

• 7520 e-all-in-one black ink does not print

  Black ink will not print.  Tried to clean it. Replaced by the new cartridge. Other colors are fine.  Picture is fine.

  The here document has troubleshooting which can help solve the black does not print on your Photosmart 7520e.  Don't forget to check the vents, as shown in the third stage of six, solution.  If the above does not resolve the problem, the message here can help.

• All-in-one HP OfficeJet 8610: All in one HP 8610 does not print right to police

  Hello

  you just bought a new HP all-in-one officejet 8610 to replace my 8600.

  I use a police - Babylon5 hollow - to print a message (like "COPY") to the text, in red (but result in black or any other color is the same).

  While my 8600 (and all my other printers) does it perfectly, the 8610 messes things.

  The lines of the police (I use the 50 size) are so thin that the text is as good as not there.

  I checked the settings of the printer, and they are substantially the same as for the 8600.

  Any ideas? I use this font for years, and I am very attached to it :-)

  Thank you

  Leo

  Hello

  It is not the solution, but I solved my problem by using another font.

  Thanks for the support,

  Leo

• 7510 Photosmart HP e-All-in-one: Photosmart 7510 does not, tech help links not working no more.

  My 7510 Photosmart was working fine just a couple of days, but suddenly, I have a problem: he will pretend to be printed, but there are only a few weak gray lines (which do not match with the document being printed).  I tried the links online to HP technical support, but they all fail, with messages such as:

  Internal Server Error - read

  The server has encountered an internal error or misconfiguration and was unable to respond to your request.

  Reference #3.9733fea5.1428886261.1ce573bc

  The ink cartridges are all quite complete, except for the small black - the big one is full.  I got no error message.  I have reset to factory settings, without success.  I was printing a PDF file.  I don't think that the problem is with the computer, because I tried to print with another computer, with the same result.  The computer is a PC, in Windows 8.

  Help!  I need to print an extension with the IRS!

  Hello

  Please try the steps below...

  1 > while the printer is turned on, open the cartridge door. Check if the ramasseherbe moves automatically.

  2 > wait until the printer goes into silence.

  3 > try to manually move the carriage.

  4 > if the carriage does not move, it could be a ramasseherbe jam. You may need to check if there is a paper jam in the field of transport.

  5 > remove print head, close the printer cover. Unlug if power cord back of the printer.

  6 > wait 30 seconds, and then reconnect the power cord to the back of the printer.

  7 > install the print head and cartridges when prompted.

  If you the problem persists, please call HP Tech Support for assistance because he clould be a problem with the print head.

  If you are in the United States, the toll free # is 1-800-474-6836.

  If you're not in the United States, and then connect to www.hp.com , bottom left it is an icon of the world map, click it and then select the region that you belong to, which would then provide the support options for you for this region.

• HP DeskJet 3630 all-in-one: desjet 3630 does not print color

  Hi, I bought a new HP DeskJet 3630 series all-in-one printer today. Setting up the printer I did several tests that show color printing, however, whenever I try to print an image in color (working on my daughters school book) it prints in black and white. I did troubleshooting all I can think of, we have no black & white printing turned on. I'm not quite sure, what else to make sure the printer is brand new and should be able to print in color?
  Any help or advice would be much appreciated.

  Not quite sure what I did to make it work, di, but the cleaning cycle for the cartridges of ink & rebooted several times, and the printer is now printing normally =)

• Want 4520 all-in-one: 4520 want does not print from internet

  The printer prints documents from Word and other programs, but NOT the internet. I checked the network printer is connected to and I am connected to this network. I checked to see if it was a driver issue I saw one when I checked the device. I downloaded it, but it has not made a difference. I do not see a network called Direct 85 HP Envy 4520 series listed in network connections options, but when I select this option, I have no internet connection, only the printer. I want to be able to be on the internet and be able to print from it. Please help, thanks.

  Hello

  Looks like you are using the direct wireless feature of your printer that allows your printer generate its own wifi signal and your laptop / PC connect directly to-cela the drawback being that it puts the signal from your laptop / PC to the printer and prevents internet access.

  The best way to print wireless while being able to use internet on your device is to connect your printer and your laptop / PC to your home wifi signal. You must disable all direct features active wireless on your printer off and connect to your wifi signal at home (not the 85 HP Envy 4520 series Direct signal).

  Pages 36 and 37 of the below user guide shows how to configure the wireless connection.

  http://h10032.www1.HP.com/CTG/manual/c04778353

• Printers HP e-all-in-one, 4622. Does not print the page of the website.

  Windows XP.  Starting yesterday will not print page of the website.  Cannot print My Documents.  Get the message "an error has occurred in printing".  The following screen shows "save the file under...". ».  Have you tried another USB port and a computer restore to earlier date - nothing works.

  Greetings! Welcome to the Donaldsan forums

  I read your post about how you cannot print from a Web page. You are able to correctly print your documents, that shows us that the printer hardware is correct.

  I suggest that you try to print from a web browser that is different to see if that helps. If this does not work, the problem may come from this Web page that you are printing from.

  You can also run the print and Scan Doctor to fix problems printing or scanning.

  I hope that helps!

  Have a nice day

• HP Photosmart C6280 all-in-One: Photosmart C6280 does not print after trying to clear the error library/startupitems

  I had a Library/Startupitems error since update my software HP a couple of years ago.  Trying to finally solve this problem myself, the HP site suggested to remove and reinstall the software.  There are no active link in the pages of HP support for a download.  I found a C6200 series pilot online, I have installed, but now I can't print anything but a test page, and I still have the error Library/Startupitems.  As it is, I can not even find this file to fix the error.

  Hi @Eric_V67

  I don't know exactly what causes this error, but I think it has something to do with permissions of drive Macs. Please, try the following steps and let me know the results of your efforts;

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• Photosmart 6510 e - All - In - One: Photosmart 6510 does not print black clearly

  My printer prints everything but black clearly; I put in a new cartridge and run the head cleaning nothing works. Is it possible to clean the head for black to hand? Help! I have things that I need to print!

  Thank you! It was easier and less likely to damage if I just bit the bullet and replaced it! I may need your help in the future with the HP OfficeJet Pro 8710 - stay tuned

• HP Photosmart all-in-one scan button does not work - Windows 7

  "After you have reinstalled C4750 all-in-one software on my desk, I am constant flashes of" Windows configuration... TryApp ".

  In addition, the printer Scan to PC button does more work. Scans can only be initiated from PC. It would seem that the scan key is not associated with an application to launch the activity.

  Advice on corrective action to both questions would be welcome.

  Hi cliffview,.

  Welcome to the HP Forums!

  I see that your photosmart is not scanning.

  Please let this first message error/loading, so that you can tell me exactly what he said.

  Can analyze you successfully since the HP Solution Center?

  Also what the printer said when trying to scan to the computer?

  Hope to hear back and thank you for posting.

• All-in-one HP 6525 does not install correctly

  Hello and hope you can help me. I tried looking for the answer to my problem in the previous posts of the forum but could not find anything useful for me.

  I bought the printer about a month ago, I installed it without any problem (wireless), but at some point, I couldn't use the scan function. I had to use the USB connection to make. I thought about uninstalling resettlement of amd, but several problems have emerged. Now, I can not install all the features, scan function does not work wireless, not to mention eprint. I have removed all HP registry keys before reinstalling the software still does not work. When I get to the control network environment, the program blocks. The printer is connected to the wireless network, it shows even documents.

  Please, can you help me?

  Hi @ionelaiordan

  I understand that you have already uninstall it and tried to install it, but the following steps may resolve the software questions have expressed you;

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%

  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted

  3. The new software - uninstall the printer software Instructions

  4. Once the uninstall is complete, reboot the computer

  5. Follow these steps to reset the registry settings and options for Windows Installer.

     • Hold down the key of the Windows Logo on the keyboard and the 'R' to open the dialog box run

     • In the Open box, type msiexec /Unregister, and then click OK.

     • Hold down the key of the Windows Logo on the keyboard and the 'R' to open the dialog box run

     • In the Open box, type msiexec/regserver, and then click OK

        * Note: there is a space between the c and the /.

        

       If you do not at this stage, use this link to perform another way. Restart Windows install

  6. Run the system Accessories\ tool disk cleanup <> How to delete files using disk cleanup

  7. Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.html

  8. Perform a clean boot > How to perform a boot in Windows

  9. Download the following SP40669 file download - if this download and or install, please proceed to the next step.

  10. Disable real-time scanning and the firewalls; The image below is an example of McAfee, if you have another antivirus program and need help to disable the analysis in real-time and firewall let me know.

      

      Source of the image

  11. Download and run the HP printer install wizard for Windows

  The HP printer for window installation wizard was created to help Windows 7, Windows 8, and users Windows 8.1 download and install the latest and most appropriate HP software solution for their HP printer.

  Please let me know the results of these efforts.

• Photosmart all-in-one C310a: black is not PRINTED

  Black ink stopped printing. Followed by all HP troubleshooting steps, including the verification of configuration/preferences, changing cartridge and ran HP print and doctor Scan, uninstalled/reinstalled the driver/software, disconnected printer for an hour, plugged restarted. Still does not print black. All the colors OK. Do not quality of cartridge, alignment and other test prints. What to do next?

  problem solved by cleaning the printhead again.

• I have a hp photosmart C6380 all-in-one and it will not print

  PRINTER

  I have a hp photosmart C6380 all-in-one and it will not be printed. Saids it is disabled in case of problems and it is not off! Tried to turn it off, then comes back on but still saids its judgment. What should do?

  Hello

  Make sure that your print spooler service is started.

  At this point, on your computer, check the status of the print spooler service. Restart the print spooler services.

  a. Click Start, type services.msc and press ENTER.
  b. scroll down to print spooler.
  c. start the print spooler service.

• OfficeJet 6000 E609n: One color (black) does not print

  Background the color black does not print.
  Background page printed from the printer status indicates that there is no black ink. This impression has said that there is sufficient (at least 20%) supply of three coloured inks. Per the comment above, no black printing does appear on the page printed of the status of the printer, even if the black cartridge has been rather recently installed (2015-12-24).
  Background none of the four "low ink" lights on the printer are turned on.
  Background the State indicated by the HP Solution Center utility displays a green check mark, that is to say, that everything is OK.
  Background the "estimated ink levels" in the utility HP Solution Center indicate that the black ink cartridge is about 60% full.
  Background I've done the first of these two cleaning procedures to clean the print head. It produces no change. (In fact twice.)
  Background I removed the power cord to the printer and unplugged the power cord from the source and then wait 10 seconds. Then I reconnected things together. Nothing has changed.
  Background I cleaned the vent for the black cartridge.
  Background I replaced the black cartridge. The level indicated on the "Estimated ink levels" in the HP Solution Center utility now indicate that the black ink cartridge is 100% full.  No change.

  Background now, I think that the problem may be the print head.  I am discouraged.

  Any suggestions?

  Hi @Upper_Left,

  It seems as if the HP product registration service is temporarily unavailable.

  Normally you get invited to register immediately after installation is complete.

  It's a Web page that can help you know if the printer is listed, or as aid re-register once the number of available service - Registration Question Index.

  The term of defective kernel is used which means that the defective part you are replacing is the same part that you send back.

  When you select the option to change the replacement part is usually repaired or refurbished, is why there is such a difference in price between the parties. It seems that if the defective part is not returned within the specified time. 'faulty base tax' is loaded.

  I can't say for sure 100% that the problem will be resolved to the replacement printhead. If the printer was in warranty, it would be the normal order of operations.

  Please click the "accept as Solution" and the "thumbs up" button up on top of my first response above and other similar issues may find the easiest solution.
   
  Thank you!