MacBook Pro 2015. Safari got locked. How to unlock?

Mac Book Pro 2015.  10.10.3 than Safari OS got locked. How to unlock?

Force Quit Safari. Hold down the SHIFT key during the re-loading of it.

In the future, be more specific. I'm just guessing the cause. See writing an effective communities of Apple support question.

Tags: Mac OS & System Software

Similar Questions

  • The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

    The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

    The problem is most likely an attempt to update a system malfunction prior it is probably a problem with your computer, not the El Capitan.

    Start by:

    Reset the PRAM and NVRAM on your Mac.

    MacIntel: Reset of the controller (SMC) system management

    Start in Safe Mode , and then re - start normally. It's slower that a normal start, so be patient.

    If you are unable to start;

    Reinstall El Capitan without erasing the drive

    Please make sure that you back up.

    1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
    2. Select disk utility, then click on the continue button.
    3. Select the withdrawal (usually Macintosh HD) entry of the volume in the list aside.
    4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
    5. Quit disk utility and re-enter the Utility Menu.
    6. Select Reinstall OS X and click on the continue button.

    Also, see this tip for user: basic steps for the OS X upgrade.

    If this doesn't get you;

    Install Yosemite or El Capitan, from scratch

    Backup if possible before proceeding.

    Restart the computer. Immediately after the chime hold down the command and R buttons until the Apple logo appears. When the Utility Menu appears:

    Select utility disc in the Menu Utility, then click the continue button.

    When loading disk utility, select the volume (entered into withdrawal, usually Macintosh HD) from the list of devices.

    Click Delete in the main window of disk utility. A panel will fall.

    Define the type of Format Mac OS extended (journaled).

    Click on the apply button, then wait for the done button to activate and click on it.

    Quit disk utility and re-enter the Utility Menu.

    Select reinstall OS X and click on the continue button.

  • I have a Macbook Pro 2015 retina and I wonder how the cycles of battery are calculated?

    I have a Macbook Pro 2015 retina and I wonder how the cycles of battery are calculated?

    If I load to 100% and then run it down on battery to 0% of course it counts as a battery cycle.

    If I recharge to 90% and run up to 5% or 10%, which count as a battery sprays?     Between what % are there?

    The reason I ask is that I try to keep the cumulative battery cycle count down.

    Thank you

    http://www.Apple.com/batteries/why-lithium-ion/

    Whenever he finishes a full charge, it's a cycle.  If you charge 70% one day, then 30% another day, it's a cycle.

    The Apple site, I posted above, it explains very clearly.

    A cycle is counted when the battery has completed a 100% charge, not a discharge.

  • MacBook pro 2015 Diode, heating problems

    Hello

    I just bought a MacBook pro 2015, one with 2.8 GHZ, 16 GB RAM and ITB Flash. [old just four days]

    The question being, the first day of the machine as well as the charger were burning Red hot when I loaded for the first time, in subsequent attempts, heating got sorted out by itself.

    Nevertheless, I had installed the temperature gauge in the machine, I look one only a few videos YouTube youtube and navigation.

    Once in every two hours a message like

    The led O GPU temperature is 106 degrees, closing applications.

    Once I click on the tool, the temperature is now reset to 30 ° C. It seems that the temperature of the Diode is to reach 106 degrees, some app is closed (no one knows the tabs I have open in Safari are works well) and then it resets.

    Is it really a problem with the thermal conductive paste or a faulty diode.

    I go to the Apple store this Saturday? Can I return the laptop and request a new or a full refund.

    Can someone please advice?

    If you bought Apple with the last 14 days, you can return it for a full refund.

    http://store.Apple.com/us/help/returns_refund
    Then you can buy a new one.

    What about Apple and they can exchange it without having to go the way of reimbursement.

  • Fans of 0 RPM MacBook Pro 2015 retina

    I know that the new MacBook Pro 2015 idling retina have fans at 0 RPM.

    My MacBook pro retina early 2013 have fans idling about 1500 rpm, they are always on.

    Is it normal that my MacBook pro retina 15 inches?

    Thank you

    I don't know where you got information about a speed of 0 RPM. The good idle speed is 1500 rpm, and the fans are still running. This is what cools the machine. If you see a 0 RPM fan; then, there's a major hardware problem.

  • MACBOOK PRO 2015 WIFI UNPLUG SLEEP YOSEMITE EL CAPITAN HELP :/

    Hello, I recently bought a new macbook pro 2015 13.3 inch edition last month and when I close the lid of the screen or put my laptop to sleep and wake up the display of my network settings says that my wifi is connected but webpages in safari and other features of the internet do not work and I need to activate the wifi and turn it back on and it works again. I tried absolutely everything already to try to solve the problem as reseting; Landau, MSC, deleting of plist files, remove and reset pefferred adding new location and reset service order, pure networks install of El Capitan 10.11 and upgrade 10.11.2 and even get my card replaced airport and macbook pro replaced shorty after. Until I replaced it, it ran from El Capitan. And now the replaced macbook pro is running Yosemite 10.10.5 and the problem is still there.

    I found has temporarily solution which was to download nosleep Yosemite version extension program that disables the function sleep at all times, but eventually it will damage my screen. I would like to know if anyone finds a solution for this problem? My wifi works fine on all my other devices such as my: 2 pc, chrome book, iPad and iPhone. It gives just problems on my macbook pro only. Everyone knows about this problem? And did you find a good solution that I have not mentioned? also I have Time Warner Cable and I have a 2 in 1 router modem by model Arris DG1670A which has 2.4 and 5 G-banding and the problem occurs on both frequencies. I have also the 300/20 DL / plan UL which allows to connect more devices to the internet if that helps. I tried my macbook pro on a neighbors WiFi and on connecting wifi apple store it does not disconnect and worked correctly, but I did not try it long determine if it worked well.

    IM thinking of buying an other internet router modem but I don't want to spend the money if its will not solve the problem and that this problem cannot be resolved it would be wise to return my macbook pro?

    Hello NYFAME,

    Thank you for using communities Support from Apple!

    I understand that you have unexpected drops wireless connection when your Mac wakes up from sleep. It seems that you are connected, but you cannot connect to the internet.

    To begin troubleshooting of this situation, I suggest to use Wireless Diagnostics to help you identify and resolve any potential problems.

    Use Wireless Diagnostics helps you troubleshoot Wi - Fi on your Mac - Apple Support

    See you soon!

  • MacBook pro 2015 stuck in Bluetooth Setup mode after commissioning, recognizes on the keyboard and track pad. SMC reset does not work.

    My Macbook Pro 2015 stopped periodically (and now permanently discontinued) responding on keyboard and touch pad Board. This seemed to start at the same time, I got a Bluetooth headset; When I turn on the computer, he's stuck in Bluetooth Setup mode. I tried to reset the SMC, and it does not work. I don't have a Bluetooth keyboard to even try with it. Also, I can't start in safe mode. It seems completely blocked. Any help you might be able to offer would be great!

    Hello rad trp,.

    Thank you for using communities Support from Apple!

    From your post, I understand that your keyboard and trackpad on your MacBook Pro are unresponsive and now you see the Bluetooth set up screen on the computer. I also see that you tried to reset the SMC, but that doesn't seem to work because the built-in keyboard do not respond.

    I know that you do not have a bluetooth keyboard, you can connect, but you have a USB keyboard? Even a USB keyboard for a computer Windows will work. If you do, I would say connection that the keyboard and you use these keys to perform an SMC reset, but reset the PRAM as well. Instructions on both of these resets can be found in the links below if you need.

    Reset the management system (SCM) controller on your Mac - Apple Support

    OS X Yosemite: reset PRAM your computer

    See you soon!

  • MacBook pro 2015 bootcamp error

    Hi all

    I have a MacBook pro, 2015, with 10 Windows boot camp on it (300 GB Mac, PC 200 GB)

    Windows and Mac have been working fine, until yesterday

    I tripped over the cable and disconnected the device (no problem, right?) but it off instantly, even if it had a decent amount of battery left and noticed a time of incredibly long boot, but Windows (which was what it was defined on) seemed fine, so I don't think about it

    But today I tried to use the side mac and I have serious problems

    -Incredible Lag (I pressed the H key, as a test and it came 2 minutes later)

    -Controls unresponsive (keys don't line up with what has been typed)

    -The mouse move (he jumped to a place randomly after trying to move)

    I did not connect, so I don't know anything about the problem

    If anyone has had this problem or knows something about it, I'd be delighted to hear your advice

    Thank you!

    Stop

    Disconnect all external devices

    Reset SM

    Reset the management system (SCM) controller on your Mac - Apple Support

    start in safe mode

    Try safe mode if your Mac does not end commissioning - Apple Support

    check the operation of your system

    with deleted devices, restart normally.

    Recheck the system.

    If the problem persists, you can view a report of etrecheck for more Analytisis

    www.etrecheck.com

  • MacBook Pro 2015, closing the lid!

    If someone can confirm the following:

    When I close the lid on my Macbook Pro 2015 - done just go to sleep or is it all the same set up to close completely?

    Also when he is asleep the battery continues to flow?

    Just goes to sleep.

    It's a little if will not connect to a power source.

    To stop it down click on stop in your menu Apple .

  • Mavericks on macbook pro 2015

    It is possible to install the mavericks in a macbook pro 2015, something?

    Thank you!

    N ° your computer requires the version of Mac OS X it came with or a later version. Mavericks would even boot up the computer.

  • The macbook pro 2015 include facetime or what needs to be bought?

    FaceTime is included as an application on my computer macbook pro 2015?

    FaceTime is included.

  • DeskJet 1510: Macbook Pro 2015 have no usb b female interface for Deskjet 1510

    Hi, Expert, Macbook Pro 2015 do not have usb female interface for Deskjet 1510 b, do I know what cable I can buy to connect? Thank you

    Sorry, I made mistake. I recently to get this product to a friend. When I saw the printer usb cable, I guess that USB Type B male interface must be connect to the MAC and USB Type A is for printer. I was wrong. Thank you for the support.

  • Creative Suite CS5 - HAVE blocks with El Capitan on Macbook Pro 2015

    Hello

    I recently "upgraded" from 2006, one to a Macbook Pro 2015. Illustrator Creative Suite CS5, I bought years ago continues to crash when I try to save files, among others. I have read several forums and still do not have an effective solution. I tired: install Java 2015-001, uninstalled, and reinstalled the Creative Suite, renamed the file manager services with '.bak' and nothing works. I'm a graphic designer with the big upcoming deadlines and need of emergency assistance. Please advise! Thank you. Creative Suites Illustrator Download, installation, setting up

    If El Capitan Mac (or the new operating system of Sierra) read below

    CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

    -which means you are trying to use CS6 and earlier at YOUR risk of having problems

    -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

    -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

    But... If you have an old program, it is only certified to run with an old operating system

  • trying to regenerate in widows 8 message tha my HDD is locked how to unlock it

    trying to regenerate in widows 8 message tha my HDD is locked how to unlock it

    I'm having the same problem. I need to refresh my settings but when I go to restore it tells me that my hard drive is locked and I need to unlock. This happened after my PC froze for an update and now all my apps and the tiles went on the start menu.

  • The cooling fans how are 13 '' MacBook Pro 2015/16 retina?

    Hello

    Sometimes, my mac make noise with its cooling fans, I tried to use some software for the diagnosis and is surprised that a single cooling fan has been detected. Could you please clarify how cooling fans are in my mac?

    My mac is:

    MacBook Pro (retina, 13 inches, early 2015)

    2.7 GHz Intel Core i5 processor

    8 GB 1867 MHz DDR3 memory

    Graphics Intel Graphics Iris 6100 1536 MB

    Serial number C0 * VH5

    Thank you in advance,

    Maksim

    < personal information under the direction of the host >

    This model has a fan

Maybe you are looking for

  • Running 32-bit executables on 64-bit operating system fails

    I'm trying to run a test program compiled on a 32-bit Labview (Labview 2011 running in Windows XP) on a 64-bit Windows 7 environment Home premium. When I open this application, it performs some actions, but there is no accumulation of front panel and

  • print M1522nf problems

    My Laserjet M1522NF HP's all-in-one is having problems printing. When I print there is an empty column in the center of the page that dissects the printed documents. The only thing I've tried so far is to uninstall and reinstall the printer. Thank yo

  • Problem with the microsoft lifecam vx2000 and Yahoo chat display white screen and not my photo

    Hi, I use microsoft lifecam vx2000 for my cat to yahoo, it was working fine for a while. Since a few days there send me a problem. It shows a white screen instead of my image... Help, please

  • Request failed because MSVBVM50. DLL was not found.

    SE MESSAGE "APPLICATION FAILED TO START BECAUSE MSVBVM50. "DLL WAS NOT FOUND".

  • Internal hard disk not found

    If I had some anger management issues and smelled slightly of my laptop. When I tried to turn it on, it says that my internal hard drive is nowhere to be found, and that I should try to reinstall it. But anyway, I tried to make the evaluation of the