MacBook Pro 9.2 breaks down after 2 years
Hello
I bought a Macbook Pro (13-inch, mid 2012) 9.2 on June 6, 2014. After almost two years, he froze one night. After restart, it showed a gray/white screen with an exclamation mark in a folder. After a visit to the store where I bought and a diagnosis of HARD drive, it appeared that the HARD drive was broken. So far so good.
I replaced the HARD drive, but the problem persisted.
That's how the problem was revealed: I managed to launch several times and it worked like a charm for several hours, then again: freeze (spinning beachball), the mouse will not move, the system is totally insensitive.
Strange thing: the Apple Hardware Test showed no problems.
Another strange thing: once, I was streaming music on the internet. He continued to play and he always did it for 30 minutes. Then, I held the power button for the shutdown of the system.
After reboot, I had a gray screen with question mark or a sign of ban folder or the symbol of apple with a spinning wheel. After leaving "rest" for a few hours, it starts again. I performed this ritual for several days. So far: the laptop computer is unbootable. It seems it's broken for good.
The real question is: If there is a hardware problem (motherboard or memory card), how was the system able to work several times for long hours. It may not be a software problem. With the new HARD drive, I reinstalled the system.
I googled HARD drive cable might be vice and that this could be the source of the problem. As something bad connection. But how can you be sure? Everyone knows about similar problems with his Macbook pro 9.2 (13 inch, mid-2012)?
I am very disappointed. It's the second Macbook Pro abandons him on me. The first one (15-inch Macbook Pro 4.1) broke after four years due to a faulty graphics unit.
Thank you for your suggestions.
To test a possible cable fault, remove the HARD drive, plug it into the MBP via USB and start the MBP with the OPTION key down. The HARD drive icon should appear, click on it. If it works normally, then that is an indicator that the SATA cable is defective or has a bad connection.
Ciao.
Tags: Notebooks
Similar Questions
-
I need to reinstall photoshop elements 8 after having problems with my hard drive. I use MacBook Pro and a timemachine. After restoring the program of the Time Machine, I got the error 6 code: a license for this product has stopt working. How can I cancel it?
See here:
-
MacBook Pro keeps freezing and timing after update to El Captain 10.11.15
I have a MacBook Pro, which was previously executed on SCF 10.11.14 2013. I began to see problems before my laptop even turned on! When it is restarted after installation, I got about 60% of the way down the front loading apple bar it has completely stopped. I waited quite awhile (maybe 20 minutes) but no progress on the charge. I did a reboot hard twice before he finally finished (sidenote: both times I restarted, instead of starting at the beginning of the load bar as it should, the load bar would start in the place of 60% that he is stopped at the first time).
It finally comes and I had to open iTunes, Photoshop and Safari so it was very laggy. After working on my laptop for five minutes, the song that I had started doing these breaks, and Photoshop as well froze upwards. I tried to go on Safari, and that's where the beachball replaced my mouse arrow. I tried to use my MB with the only window open (photoshop), but even force weren't no longer works. It just seems to be freezing for longer periods of time.
I ended up doing a hard reboot once again and only with the help of Safari, but this does not work. Hard restart once again tried only using Photoshop and encountered the same problem. This last time, I have Photoshop open, but for some reason, the tools are not answer at all. For example, when you use the Paintbrush tool, you will see a circle in the placement of the classic mouse arrow when you are in the photoshop window. Well, the arrow of the mouse remained and everything I clicked on, as well as two fingers/output action zoom did nothing. Nothing does in Photoshop anyway.
Could someone please, please help me? I'm a photographer and I have a project due to my clients in the morning, and I can't afford this issue right now. I write this on my MB Air, which runs on CBS 10.11.13. I'm afraid to try an install of update on this one!
If nothing can help, can someone tell me how easy and on an empty stomach to downgrade to the previous version of El captain? Thanks a bunch!
There is no easy way to downgrade. He must erase the drive and then reinstall OS X. First, you need a good backup. Or you can try the following:
Try these in order to test your system after each see if it is back to normal:
1. a. reset the PRAM and NVRAM on your Mac.
b. Macs with Intel processors: reset of the controller (SMC) system management
2. restart the computer in Safe Mode, and then restart again, normally. If this does not help, then:
Boot to HD recovery: restart the computer and after the buzzer, press on and press and hold the
Command and R keys until that Menu Utility screen appears.
3 repair the hard disk and permissions: restart the computer and after the buzzer, press on and hold down the command and R until the Menu Utility screen opens.
When the Utility menu, select disk utility, and then press the continue button. After loading disk utility select it
indented (in general, Macintosh HD) entry of the list to one side. Click first aid button in the toolbar. Wait for the operation
is over, then quit disk utility and return in the Utility Menu.
4 download and install updated Combo OS X El Capitan 10.11.5.
5 reinstalling OS x: reboot of HD recovery Select reinstall OS X in the Utility Menu and click on the continue button.
[Exclusive to use the foregoing authorization to theratter by khati.]
-
10.2.3 FCPX breaks down after 10.12
I have Final Cut Pro X 10.2.3 and after the update for Sierra 10.12 had an accident no matter what I do in trying to open the application. I tried:
Remove THE Plugins accordingly to this site
http://www.Sweetwater.com/sweetcare/articles/uninstall-waves-plugins-Mac/
Tried to remove FCPX with a full out through
FCS Remover
Remove all deleted files
Restart
Reinstall from scratch
Downgraded to 10.2.2 alsoRepeat this at least twice
System
MacBook Pro (retina, 13 inches, early 2015)
2.7 GHz Intel Core i5 processor
8 GB 1867 MHz DDR3 memory
Graphics Intel Graphics Iris 6100 1536 MB
Process: Final Cut Pro [666] Path: / Applications / Final Cut Pro.app/Contents/MacOS/Final Cut Pro Identifier: com.apple.FinalCut Version: 10.2.3 (276640) Update information: ProEditor-27664000056000000 ~ 1 Code type: X 86-64 (native) Parent process: ??? [1] Responsible: Final Cut Pro [666] ID of the user: 501 Date/time: 2016-09-21 22:50:51.226-0300 OS version: Mac OS X 10.12 (A 16, 323) Report Version: 12 Anonymous UUID: C62DC6AF-EE76-994A-F130-8AD374A91D6F Time since started awake: 570 seconds
Integrity of system protection: enabled
Discussion crashed: 0 dispatch queue: com.apple.main - wire Exception type: EXC_BAD_ACCESS (SIGSEGV) Exception codes: KERN_INVALID_ADDRESS at 0x00005070771bbec8 Note the exception: EXC_CORPSE_NOTIFY Signal endpoint: Segmentation fault: 11 Reason for termination: Namespace SIGNAL, Code 0xb Termination process: Manager exc [0]
VM regions near 0x5070771bbec8:
__LINKEDIT 00000001198a 0000 - 00000001198f5000 [340K] r-/ rwx SM = COW /System/Library/Frameworks/PubSub.framework/Versions/A/PubSub ->
MALLOC_NANO 0000600000000000-0000600000800000 [8192K] rw-/ rwx SM = PRV My first suspicion is that there may plug-ins that need to be updated.
Even if you have uninstalled and reinstalled, plug-ins that you have in the folder models of animation will be intact (AFAICT); and I guess that even for FxFactory plugins.
If you have FxFactory plugins, maybe updated FxFactory and check for versions updates to these plugins as well.
FWIW, reported several of FCP X works well in the Sierra (apart from the return of the timecode display glitch), so he owes something in your installation. Could also be a conflict with other software apparently unrelated.
-
My macbook pro could not start even after various combinations of keys
After referring upgrade to the macbook pro mid 2011 for OS X 10.11.15, I have to do a lot to restart, as well as the different key combinations in order to get mac (even that becomes difficult to solve the problem now!) I tried the diet, Ctrl + R, Shift + Ctrl + S, Shift + Ctrl + R + P, etc.. Although this may work from time to time, I am particularly concerned when I do school work timely.
What is responsible for this and how can it be solved?
When your Mac "not getting", what exactly do? What told you it does not work properly?
-
MacBook Pro not completing the update after reboot
Hello!
I have need help and need some advice. It has been more than 3 months now that this has not been resolved. My Macbook Pro will not perform updates on the App Store after the reboot. I restarted to complete the update, but the message keeps popping up that I need to do the same thing. The software update that needs to be updated is Mac EFI Security Update 2015-001 1.0. I have a Macbook Pro 2012 OS X Lion Mountain 10.8.5. Help, please!
the message keeps popping up that I need to do the same thing.
Whence this message pop up?
Update App Store problems See Linc Davis response.
Go to the menu with the option/alt key is pressed and select the first item. Then, go to the software/facilities the report part and see if the update is listed as installed.
-
MacBook Pro key does not not after spraying.
Hello! Other keys + keys arrow of my MAcBook Pro has stopped working after I sprayed accidenly guarantee directly to the Board of Directors. Clean under the key and the key, but it did not help. Any Suggestions? Thank you! (With the help of the external keyboard)
Turn off, leave it off. It takes the Apple Store. Fluid + electronic = electronic fried, too often. Assessment is free, however.
Prepare a backup, you may need it.
-
MacBook Pro Late 2011 Lion slow after new mem SSD and 16G
I'm under Lion (10.7.5) on a MBP late 2011. Replaced the original 750 GB HDD with a 1 to Samsung SSD 850 EVO and store Crucial 2x8G; to replace the battery with one of Lizone. (Restore own Internet) installation of Lion on the SSD in an external enclosure, software update, then exchanged the SSD for the migration of Bay assistant and used internal drive with the old HARD drive in the external box. OnyX to clear the caches and other cleanup. Basic response (keystrokes, menus, scrolling, select the element and application launch and quit smoking) is stutteringly slow and delay - but sometimes, after a reboot, all right (with dynamic performance, I expected to the SSD upgrade) for awhile. I have disabled Spotlight and invoke TM only manually.
I've ran out of ideas and would appreciate advice on what could be causing the slow response! Thank you.
EtreCheck:
Hardware information: (does that mean?)
MacBook Pro (15 inch, late 2011)
[Click for plug technique]
[Click here for the User Guide]
MacBook Pro - model: MacBookPro8, 2
1 2.5 GHz Intel Core i7 CPU: 4 strands
16 GB OF RAM
BANK 0/DIMM0
OK 8 GB DDR3 1600 MHz
BANK 1/DIMM0
OK 8 GB DDR3 1600 MHz
Bluetooth: Old - transfer/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery: Health = Normal - Cycle count = 2 - SN = 0123456789ABC
Information about this video: (does that mean?)
AMD Radeon HD 6770M - VRAM: 1024 MB
Apple Cinema Display 1680 x 1050
Intel HD Graphics 3000 - VRAM: 512 MB
Software system: (does that mean?)
OS X Lion 10.7.5 (11G 63) - since the starting time: 3 hours
Disk information: (does that mean?)
SAMSUNG SSD 850 EVO 1 to disk0: (1 TB) (Solid State - TRIM: No.)
disk0s1 (disk0s1)
: 210 MB Chapin SSD (disk0s2) /: 999,35 go-go (800,87 free)
HD (disk0s3)
[recovery] recovery: 650 MB HL-DT-ST DVD - RW GS31N)
USB information: (what does this mean?)
Apple Inc. FaceTime HD camera (built-in)
Apple Inc. BRCM2070 hub.
Apple Inc. Bluetooth USB host controller.
Apple Inc. Apple keyboard / Trackpad
Computer, Inc. Apple IR receiver.
Lightning information: (does that mean?)
MacBook Pro from Apple, Inc..
Kernel Extensions: (does that mean?)
/ System/Library/Extensions
com [loading]. Cycling74.driver.Soundflower (1.5.2) [click here to support]
[no charge] com.marvell.kext.USBGenericPrinterClass (1.0.0) [click here for support]
Startup items: (does that mean?)
ChmodBPF: Path: / Library/StartupItems/ChmodBPF
Startup items are obsolete in OS X Yosemite
Demons of launch: (does that mean?)
[loading] com.bombich.ccc.plist [click here for support]
[loading] com.microsoft.office.licensing.helper.plist [click here for support]
Launch User Agents: (does that mean?)
[loading] com.google.keystone.agent.plist [click here for support]
User Login items: (does that mean?)
iTunesHelper hidden Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Other applications: (does that mean?)
[performance] [0 x 0-0 x 25025].com.microsoft.Word
[performance] [0 x 0-0 x 27027].com.microsoft.autoupdate.fba
[performance] [0 x 0-0 x 38038].com.microsoft.Office365Service
[performance] [0 x 0-0 x 39039].com.etresoft.EtreCheck
com.Adobe.fpsaud [loading]
Internet Plug-ins: (does that mean?)
FlashPlayer - 10.6: Version: 19.0.0.245 - 10.6 SDK [click here for support]
net.juniper.DSSafariExtensions: Version: unknown [click here for support]
AdobePDFViewerNPAPI: Version: 10.1.4 [click here for support]
Flash Player: Version: 19.0.0.245 - SDK 10.6 obsolete! Update
AdobePDFViewer: Version: 10.1.4 [click here for support]
LogitechHarmony: Version: 2.0 - SDK 10.7 [click here for support]
QuickTime Plugin: Version: 7.7.1
SharePointBrowserPlugin: Version: 14.4.3 - 10.6 SDK [click here for support]
GarminGpsControl: Version: 4.2.0.0 - 10.8 SDK [click here for support]
Silverlight: Version: 5.1.20513.0 - 10.6 SDK [click here for support]
JavaAppletPlugin: Version: 14.3.0 - version SDK 10.7 check
The internet user Plug-ins: (does that mean?)
ZoomUsPlugIn: Version: 3.5.11039.0317 - SDK 10.10 [click here for support]
WebEx64: Version: 1.0 - 10.6 SDK [click here for support]
WebEx: Version: 1.0 [click here for support]
Safari extensions: (what does this mean?)
UTM Stripper
ClickToFlash
iMedia Converter Deluxe
Ghostery
3rd party sous-fenêtres preferences: (does that mean?)
Flash Player [click here for support]
Time Machine: (what does this mean?)
Information of Time Machine requires OS X 10.8 "Mountain Lion" or later.
Top of page process CPU: (does that mean?)
9% safari
4% WindowServer
1% Microsoft Word
0% process Web
0% of mail
Top of the process of memory: (does that mean?)
Process Web 229 MB
Mail 180 MB
180 MB Safari
98 MB Microsoft Word
WindowServer 82 MB
Virtual memory information: (does that mean?)
13,00 GB of free RAM
Used 2.81 GB RAM
Used Swap 0 B
Diagnostic information: (does that mean?)
December 14, 2015, 15:57:22 self-test - spent
Disk information: (does that mean?)
SAMSUNG SSD 850 EVO 1 to disk0: (1 TB) (Solid State - TRIM: No.)
If you are using an SSD, you use TRIM.
This allows to Spotlight and Time Machine runs automatically will not cripple your Mac. But ignoring the TRIM.
in 10.7.5, you can download the activation free utility TRIM.
-
Cannot print or scan from MacBook Pro to Officejet 6500 E709n after Firmware upgrade
I have-
MacBook Pro; OS X 10.5.8
JO HP 6500 E709n: Firmware RBP1FN0935AR connected by Ethernet to my network.
Also several XP and Vista machines machine.
I have most of my printing and scanning of MBP. I've updated the firmware the week last version (above) found under the XP software and drivers for this printer. I thought more recent firmware is always better. In any case, after that, I can no longer print or scan from the MBP. I've uninstalled and reinstalled the software on my MBP 2 times. And I followed the instructions on this forum for posts with similar problems.
I can see the printer in the Systerm preferences > Print & Fax. He is registered and has a green light. I can navigate to the printer and connect. I can not state of ink.
BUT when I run the Setup Wizard, the printer is not listed in the window "select the device".
When I do 'add devices by IP' and enter the IP, I get a message saying that it could not connect to the printer.
I can print from my XP and Vista machines. The XP machine is a virtual machine on VMWare Fusion on my MBP. So I now transfer that I want to print my XP VM just to print it. Is NOT IDEAL, but that market. Hoping to solve this problem.
1. I try to downgrade the firmware to the previous version. Is anyway to do this? How can I get the previous version of firmware?
2. I would like to know what ports are used to connect to the printer? If anyone can let me know, I'll see if my MBP has those blocked or not.
3. If anyone can offer a solution, I would appreciated it.
OK, I finally found this thing. What happened was that my wireless connection does not (for reasons unknown at this point) my Mac to connect to the printer. Even if I can get to the Web page. Hello may not cross.
Anyway, on a whim, I disabled the airport and used an ethernet cable to connect to the same switch the 6500 was conducting and reinstalled the software. And whaddaya know. I was able to install the printer, then did a scan and printing and a jig around the room.
I disconnected the cable and turn on the wireless connection, once again, and wouldn't you know, HP Scan Pro can not connect to the 6500. Is returned to the thread and it works. Hmmm.
I am due for an in new wireless access point. The DLink and my Verizon FIOS Actiontec router sometimes do strange things.
I'll still give you, PrintDoc, 1 kudo for loans to help. And the uninstalling of 3 keys; It was new to me.
I may be the only one who has never fallen on this, but it may be useful to say, do NOT take your connection Wireless for granted. Always test everything.
Thank you
-
MacBook pro 2012 Middle slowed down and the battery capacity decreases.
I have a macbook 2012 pro who is running before the El Capitan 10.11.I reasonable speed, but recently it has become very slow. It takes 30-40 sec to open an app like browser. Also my current battery capacity is 78% and over 340 cycles. My battery is defective? I have attached my report to etrecheck, any help would be appreciated!
EtreCheck version: 2.6.6 (226)
Report generated on 12/12/15, 21:25
Time 02:53
Download EtreCheck from http://etrecheck.com
Click on the links [click for support] to help with non-Apple products.
Click on the links [click for more details] for more information on this line.
Hardware Information: (Does that mean?)
MacBook Pro (13-inch, mid-2012)
[Click here for the User Guide]
MacBook Pro - model: MacBookPro9, 2
1 2.5 GHz Intel Core i5 CPU: 2 strands
4 GB of RAM expandable
[Click here for upgrade instructions]
BANK 0/DIMM0
OK 2 GB DDR3 1600 MHz
BANK 1/DIMM0
OK 2 GB DDR3 1600 MHz
Bluetooth: Good - transfer/Airdrop2 taken in charge
Wireless: en1: 802.11 a/b/g/n
Battery: Health = Normal - Cycle count = 340 - SN = W05020397D3LC
Video information: (Does that mean?)
Graphics Intel HD 4000
Color LCD 1280 x 800
OS X El Capitan 10.11 (15A 284) - since the start time: 8 hours
Disc information: (Does that mean?)
HTS545050A7E362 disk HARD APPLE disk0: (500,11 GB) (rotation)
EFI (disk0s1)
: 210 MB HD (disk0s3)
[recovery] recovery: 650 MB BOOTCAMP (disk0s4) / Volumes/BOOTCAMP: 40,00 (GB 10,09 free)
Macintosh HD (disk 1) /: 458,89 (Go 47.00 free)
Storage of carrots: disk0s2 459.25 GB Online
HL-DT-ST DVD - RW GS41N)
USB information: (Does that mean?)
Apple Inc. FaceTime HD camera (built-in)
Apple Inc. Apple keyboard / Trackpad
Computer, Inc. Apple IR receiver.
Apple Inc. BRCM20702 hub.
Apple Inc. Bluetooth USB host controller.
Lightning information: (Does that mean?)
Apple Inc. Thunderbolt_bus.
Mac App Store and identified developers
Kernel extensions: (Does that mean?)
/ Applications/VMware Fusion.app
[no charge] com.vmware.kext.vmci (90.6.3) [click for support]
com.VMware.kext.vmioplug.14.1.4 [no charge] (14.1.4) [click for support]
[no charge] com.vmware.kext.vmnet (0277.92.24) [click for support]
[no charge] com.vmware.kext.vmx86 (0277.92.24) [click for support]
[no charge] com.vmware.kext.vsockets (90.6.0) [click for support]
/ Library/Application Support/VirtualBox
[loading] org.virtualbox.kext.VBoxDrv (5.0.10) [click for support]
[loading] org.virtualbox.kext.VBoxNetAdp (5.0.10) [click for support]
[loading] org.virtualbox.kext.VBoxNetFlt (5.0.10) [click for support]
[loading] org.virtualbox.kext.VBoxUSB (5.0.10) [click for support]
/ System/Library/Extensions
com [no charge]. ZTE.driver.ZTEUSBCDCACMData (1.3.42) [click for support]
com [no charge]. ZTE.driver.ZTEUSBMassStorageFilter (1.3.42) [click for support]
[no charge] com.zte.driver.cdc_ecm_qmi (1.0.31) [click for support]
[no charge] com.zte.driver.cdc_usb_bus (1.0.31) [click for support]
~/Library/Application Support/DAEMONToolsAgent/DAEMONToolsAgent.app
[loading] com.disc - soft.DAEMONTools.VirtualSCSIBus (1.0.2 - 10.8 SDK) [click for support]
Launch officers: (Does that mean?)
[loading] Swapper.plist [click to support]
[failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist [click for support] [click for more information]
[loading] com.google.keystone.agent.plist [click to support]
[loading] com.maintain.LogOut.plist [click to support]
[loading] com.maintain.PurgeInactiveMemory.plist [click to support]
[loading] com.maintain.Restart.plist [click to support]
[loading] com.maintain.ShutDown.plist [click to support]
[loading] com.maintain.Sleep.plist [click to support]
[operation] com.maintain.SystemEvents.plist [click to support]
[loading] com.teamviewer.teamviewer.plist [click to support]
[loading] com.teamviewer.teamviewer_desktop.plist [click to support]
Launch demons: (Does that mean?)
[loading] PPPMonitord.plist [click to support]
com [loading]. BlueStacks.AppPlayer.bstservice_helper.plist [click to support]
[loading] com.adobe.ARMDC.Communicator.plist [click to support]
[loading] com.adobe.ARMDC.SMJobBlessHelper.plist [click to support]
[operation] com.disc - soft.DAEMONTools.PrivilegedHelper.plist [click to support]
[loading] com.github.GitHub.GHInstallCLI.plist [click to support]
[loading] com.google.keystone.daemon.plist [click to support]
[loading] com.macpaw.CleanMyMac3.Agent.plist [click to support]
[loading] com.maintain.CocktailScheduler.plist [click to support]
[loading] com.maintain.HideSpotlightMenuBarIcon.plist [click to support]
[loading] com.malwarebytes.MBAMHelperTool.plist [click to support]
[loading] com.teamviewer.Helper.plist [click to support]
[loading] com.teamviewer.teamviewer_service.plist [click to support]
[loading] org.virtualbox.startup.plist [click to support]
User launch officers: (Does that mean?)
[loading] com.bittorrent.uTorrent.plist [click to support]
[operation] com.disc - soft.DAEMONTools.DAEMONToolsAgent.plist [click to support]
[failure] com.jdibackup.JustCloud.autostart.plist [click for support] [click for more information]
[failure] com.jdibackup.JustCloud.notify.plist [click for support] [click for more information]
[failure] com.lastpass.LastPassHelper.plist [click for support] [click for more information]
[loading] com.macpaw.CleanMyMac3.Scheduler.plist [click to support]
[loading] com.spotify.webhelper.plist [click to support]
[loading] org.virtualbox.vboxwebsrv.plist [click to support]
Items in user login: (Does that mean?)
Hidden AdobeResourceSynchronizer Application (/ Applications/Adobe Acrobat Reader DC.app/Contents/Helpers/AdobeResourceSynchronizer.app)
Other applications: (Does that mean?)
[ongoing] com.Apple.XPC.launchd.oneshot.0x10000003.AdobeReader
[ongoing] com.etresoft.EtreCheck.164512
Plug-ins Internet: (Does that mean?)
QuickTime Plugin: Version: 7.7.3
AdobePDFViewerNPAPI: Version: 15.009.20077 - SDK 10.8 [click for support]
AdobePDFViewer: Version: 15.009.20077 - SDK 10.8 [click for support]
Default browser: Version: 601 - SDK 10.11
nplastpass: Version: 3.1.89 - 10.10 SDK [click for support]
Web of Google Earth plugin: Version: 7.1 [click for support]
JavaAppletPlugin: Version: 15.0.1 - 10.7 to check the version of the SDK
User Plug-ins internet: (Does that mean?)
Kkkkk Install detector: Version: unknown
Safari extensions: (Does that mean?)
PanicButton
BB for Google and Safari toolbar
Betwext remind
Add to the list of Amazon gift
Cleaner - YouTube
Reload button
WOT
Incognito
Turn Off the Lights
LastPass
Button bar
3rd party preference panes: (Does that mean?)
Jitouch [click to support]
Time Machine: (Does that mean?)
Time Machine not configured!
Top of page process CPU: (Does that mean?)
6% WindowServer
5% com.apple.Safari.SafeBrowsing.Service
3% kernel_task
1% fontd
0% safari
Top of page process of memory: (Does that mean?)
519 MB kernel_task
471 Mo com.apple.WebKit.WebContent (3)
Safari of 332 MB
Mdworker (15) 229 MB
WindowServer 94 MB
Virtual memory information: (Does that mean?)
159 MB free RAM
3.84 GB used RAM (1.10 GB being cached)
Used Swap 0 B
Diagnostic information: (Does that mean?)
12 December 2015, 13:05:50 self-test - spent
December 12, 2015, 09:43:55 /Library/Logs/DiagnosticReports/TeamViewer_2015-12-12-094355_[redacted].hang
December 12, 2015, 08:25:34 ~/Library/Logs/DiagnosticReports/Activity Monitor_2015-12-12-082534_ [redacted] .crash
If you haven't done so already, please try first this simple step .
-
General purpose is simply slow. Even typing this message is a pain because of the intermittent freezing. No idea how to solve this problem? Here are my stats from EtreCheck:
EtreCheck version: 2.6.6 (226)
Report generated on 09/12/15 13:30
Duration 31:08
Download EtreCheck from http://etrecheck.com
Click on the links [click for support] to help with non-Apple products.
Click on the links [click for more details] for more information on this line.
Click links [click to remove] for help to remove the adware.
Hardware Information: (Does that mean?)
MacBook Pro (13-inch, mid-2012)
[Click here for the User Guide]
MacBook Pro - model: MacBookPro9, 2
1 2.5 GHz Intel Core i5 CPU: 2 strands
4 GB of RAM expandable
[Click here for upgrade instructions]
BANK 0/DIMM0
OK 2 GB DDR3 1600 MHz
BANK 1/DIMM0
OK 2 GB DDR3 1600 MHz
Bluetooth: Good - transfer/Airdrop2 taken in charge
Wireless: en1: 802.11 a/b/g/n
Battery: Health = Normal - Cycle count = 1532 - SN = 9G22004D3D3MB
Video information: (Does that mean?)
Graphics Intel HD 4000
Color LCD 1280 x 800
OS X El Capitan 10.11.1 (B 15, 42) - since startup time: less than an hour
Disc information: (Does that mean?)
Disk0 APPLE drive HARD TOSHIBA MK5065GSXF: (500,11 GB) (rotation)
EFI (disk0s1)
: 210 MB HD (disk0s3)
[recovery] recovery: 650 MB Macintosh HD (disk 1) /: 498,88 (Go 68.00 free)
Storage of carrots: disk0s2 499.25 GB Online
MATSHITADVD-R UJ - 8À8)
USB information: (Does that mean?)
Apple Inc. Apple keyboard / Trackpad
Computer, Inc. Apple IR receiver.
Apple Inc. BRCM20702 hub.
Apple Inc. Bluetooth USB host controller.
Apple Inc. FaceTime HD camera (built-in)
Lightning information: (Does that mean?)
Apple Inc. Thunderbolt_bus.
Any where
Genieo, InstallMac Adware! [Click to remove]
Kernel extensions: (Does that mean?)
/ System/Library/Extensions
com [no charge]. ManyCamLLC.videodevice.driver (2.0.11 - 10.7 SDK) [click for support]
/System/Library/Extensions/ManyCamVideoDeviceDriver.kext/contents/plugins
com [no charge]. ManyCamLLC.videodevice.userclient (2.0.11 - 10.7 SDK) [click for support]
Launch officers: (Does that mean?)
[loading] com.adobe.AAM.Updater - 1.0.plist [click to support]
[operation] com.adobe.AdobeCreativeCloud.plist [click to support]
[loading] com.divx.dms.agent.plist [click to support]
[loading] com.divx.update.agent.plist [click to support]
[loading] com.oracle.java.Java - Updater.plist [click to support]
Launch demons: (Does that mean?)
com [loading]. ManyCamLLC.videodevice.daemon.plist [click to support]
[loading] com.adobe.SC.FPFeedbackService - 1.0.plist [click to support]
[loading] com.adobe.fpsaud.plist [click to support]
[loading] com.macpaw.CleanMyMac3.Agent.plist [click to support]
[loading] com.microsoft.office.licensing.helper.plist [click to support]
[loading] com.oracle.java.Helper - Tool.plist [click to support]
User launch officers: (Does that mean?)
[loading] InstallMac.download.plist [click to support]
[loading] InstallMac.ltvbit.plist [click to support]
[performance] InstallMac.update.plist [click to support]
[loading] com.adobe.AAM.Updater - 1.0.plist [click to support]
com.apple.CSConfigDotMacCert [fail]-[...] @me.com - SharedServices.Agent.plist -/System/Library/Frameworks/CoreServices.framework/Frameworks/OSServices.framewo rk/Versions/A/support/CSConfigDotMacCert: Executable not found!
[loading] com.divx.agent.postinstall.plist [click to support]
[loading] com.facebook.videochat. [entrenched passage] .plist [click for support]
[loading] com.google.keystone.agent.plist [click to support]
[loading] com.macpaw.CleanMyMac3.Scheduler.plist [click to support]
[operation] com.spotify.webhelper.plist [click to support]
[loading] com.valvesoftware.steamclean.plist [click to support]
Items in user login: (Does that mean?)
CleanMyMac 3 Application Menu (~ /.) Trash/CleanMyMac 3.app/Contents/MacOS/CleanMyMac 3 Menu.app)
Other applications: (Does that mean?)
[ongoing] com.Apple.XPC.launchd.oneshot.0x10000005.EtreCheck
Plug-ins Internet: (Does that mean?)
JavaAppletPlugin: Version: 8 Java 66 update build 17 check version
OVSHelper: Version: 1.1 [click for support]
Default browser: Version: 601 - SDK 10.11
Unity Web Player: Version: UnityPlayer version 4.6.2f1 - 10.6 SDK [click for support]
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [click for support]
FlashPlayer - 10.6: Version: 20.0.0.235 - 10.6 SDK [click for support]
DivXBrowserPlugin: Version: 2.2 [click for support]
Silverlight: Version: 5.1.10411.0 - 10.6 SDK [click for support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 20.0.0.235 - 10.6 SDK [click for support]
SharePointBrowserPlugin: Version: 14.5.8 - 10.6 SDK [click for support]
DirectorShockwave: Version: 12.0.2r122 - 10.6 SDK [click for support]
User Plug-ins internet: (Does that mean?)
Web of Google Earth plugin: Version: 7.0 [click for support]
3rd party preference panes: (Does that mean?)
DivX [click for support]
Flash Player [click for support]
Java [click for support]
Time Machine: (Does that mean?)
Time Machine not configured!
Top of page process CPU: (Does that mean?)
3% WindowServer
1% SDM
1% creative cloud
1% kernel_task
0% SystemUIServer
Top of page process of memory: (Does that mean?)
Kernel_task 485 MB
Com.apple.WebKit.WebContent (4) 360 MB
172MO Safari
160 MB ocspd
Finder 82 MB
Virtual memory information: (Does that mean?)
577 MB of free RAM
used 3.44 GB RAM (1.39 GB being cached)
Used Swap 0 B
Diagnostic information: (Does that mean?)
December 9, 2015, 12:59:23 ~/Library/Logs/DiagnosticReports/AppSO_2015-12-09-125923_[redacted].crash
December 9, 2015, 12:46:43 Self test - passed
December 9, 2015, 03:25:46 /Library/Logs/DiagnosticReports/Mail_2015-12-09-032546_[redacted].hang
December 9, 2015, 01:50:30 ~/Library/Logs/DiagnosticReports/AppSO_2015-12-09-015030_[redacted].crash
8 December 2015, 16:14:54 ~/Library/Logs/DiagnosticReports/AppSO_2015-12-08-161454_[redacted].crash
8 December 2015, 15:15:44 ~/Library/Logs/DiagnosticReports/fontd_2015-12-08-151544_[redacted].crash
8 December 2015, 11:27:18 AM/Library/Logs/DiagnosticReports/VTEncoderXPCService_2015-12-08-112718_ [redacted]. cpu_resource.diag [click for more information]
8 December 2015, 11:18:10 ~/Library/Logs/DiagnosticReports/AppSO_2015-12-08-111810_[redacted].crash
8 December 2015, 10:03:51 ~/Library/Logs/DiagnosticReports/fontd_2015-12-08-100351_[redacted].crash
December 3, 2015, 02:35:28 /Library/Logs/DiagnosticReports/Kernel_2015-12-03-023528_[redacted].panic [click for more information]
November 20, 2015, 18:34:12 /Library/Logs/DiagnosticReports/Kernel_2015-11-20-183412_[redacted].panic [click for more information]
get rid of clean my mac - we know crapware. If you paid, because he wants a refund.
Remove genieo following these instuctions
http://www.thesafemac.com/arg-Genieo/
In addition, 4 GB of RAM is not a bunch of work with 10.11, if you use Chrome as browser was expecting the serious bottlenecks in the system even on a factory install.
Apple says that the max RAM is 8 for this computer, other independent reports say it will work with 16 (8GB PC3 12800 DDRL3 as two chips, but not simple a 16GB chip)
-
MacBook Pro wifi hardware not installed after update of El Capitan
Hello
I connected my macbook this morning to find that I had a gray wifi symbol with an x through it saying ' wifi: no hardware installed '. I'm taking in the Apple Store to be looked at in a few days, but only I was wondering if anyone in this community has experienced a similar issue that has an easy solution so that I can return to the top and run. It worked all fine until this morning.
Ive updated to El Capitan - 10.11.1
I have a Macbook Pro 13 inch retina end 2012
Thanks in advance
This means that the two Wi - Fi drivers are damaged or that your wireless card has stopped working.
A good way to find out what the problem is to start up in OS X Recovery in now pressed the command keys so much R during start up your Mac to the top. Once your Mac is turned on, look at the Wi - Fi icon in the upper right and see if you can choose any Wi - Fi network. If so, reinstall OS X.
However, if you can not choose any network, it is probably a hardware problem, so you have to take your Mac to an Apple Retail Store or dealer to get the Wi - Fi card replaced.
-
Satellite L40 breaks down after 5-10 minutes and will not return
I hope someone can help
I have a toshiba Satellite L40. It has not been used for a while, but I need to have stuff on it.
Put it on yesterday and then crashed after 10 minutes and would not go back
.the same thing happened today.I took out the battery and tried just to power / and vice versa, but no joy.
I'm not very technical was so had no idea what to try next.Hello
If I understand your question, the unit stopped automatically.
Such judgment may be related to high temperatures inside the laptop.L40 series is a bit old and probably the cooling vents and grilles are obstructed by dust.
Try to remove the dust using a jet of compressed air. Generally, this lets get removed dust and it helps to keep the temperature low.Of course, this procedure would only if the problem is related to high temperatures.
In the case of the laptop shuts down for other reasons, this workaround would be uselessYou said you need to get something from him in this case you could remove the internal HARD disk and could connect to another laptop computer through SATA to USB controller.
-
Zero wireless breaks down after standby using project Wireless N on Latitude D830 with Windows XP
My Latitude D830 came with Vista installed.
After various irritations with Vista, I downgraded to XP.
I allowed XP through all updates, get on SP2 with all the latest patches.
I downloaded all the latest drivers XP on the dell site, especially the one for the wireless.
I only use Microsoft Zero service wireless and does not run the Dell Wireless utility.
because she added complexity without helping what it is.
The works of wireless perfectly after I boot the system.
If I close the lid, which puts the computer in mode standby
as soon as I get my password, I get a window in the middle of the screen that says:
"Generic Host Process for win32 services has encountered a problem and needs to close."
If I look at the events, I don't see that wzcsvc.dll broke down.
Sometimes I can see the wireless in the status bar, with an x through it.
Usually, this icon disappears and the camera seems to not exist on the computer.
No amount of stopping and restarting from zero wireless facilitates the task.
I can go to Device Manager and disable, then enable the card. Which does nothing.
If I reboot, then all is well again.
I'd like to be able to use the wireless normally without rebooting all the time.
Does anyone have a suggestion?
Thank you
Peter
-
First breaks down after clicking the imported video file
After clicking on one just imported the video file (in this case. MOV to a Nikon 7100) application hangs and displays "Adobe Premiere Pro CC 20141 has stopped working" and the problem, the details are below. I tried to reset preferences but do not know what else to try. First starts up fine and I can import pictures very well but any video file (I tried. MOV. MP4. AVI. WMV) that gets imported hangs the software as soon as I try to do something with it.
Any help would be greatly appreciated!
-Aisha
System details:
Windows 7 Professional, Service Pack 1
Processor: Intel Core i5 - 4570 T CPU @ 2.90 GHz
RAM: 12 GB
Details of the problem:
Signature of the problem:
Problem event name: APPCRASH
Name of the application: Adobe first Pro.exe
Application version: 8.1.0.81
Application timestamp: 5426694c
Fault Module name: devenum.dll
Fault Module Version: 6.6.7600.16385
Timestamp of Module error: 4a5bded7
Exception code: c0000005
Exception offset: 00000000000016a 0
OS version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional information 1: ec5a
More information 2: ec5adb2545b190cc19da7bdfa78d5bf1
3 more information: 52eb
Additional information 4: 52eb6b5eb5247c23714f771b797ebaa7
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288 & clcid = 0 x 0409
If the online privacy statement is not available, please read our offline privacy statement:
C:\Windows\system32\en-US\erofflps.txt
Hello
Create a new project and without importing anything, go to file > project settings > General and change the playback engine Mercury to the GPU acceleration only software and click on remove previews after clicking OK. Then import the media.
Hope this helps,
Regalo
Maybe you are looking for
-
When I try to update Flash it says that Firefox does that block version
-
Export of text Messages on PC readable by form
Hello Sorry if it's a question of relationship, but I have an iPhone 4 and I would like to transfer my text Messages on my PC in a readable (with photos) such as Word, PDF or HTML format. Maybe even have the ability to transfer them to my iPhone (or
-
Just installed Firefox 9.0.1. When you open a new browser session, two tabs will open. One is my home page, and the other is a home page of Firefox. I want to just my home page to open. How do I get there? Thank you.
-
I was wondering if, if I restore my laptop to factory with the recovery partition, windows 7 still is activated when it restarts or will I need to contact Microsoft to reactivate?
-
Started in safe mode (at least, it should be safe mode see run and msconfig start) and I still cannot use the utility uninstall avast. Using Microsoft XP with system updates (I'm not sure complete specifications) My avast shows the AAVM subsystem RPC