MacBook Pro can't see hotspot USB iPhone

I regularly use the iPhone to create a WiFi personal hotspot to feed my MacBook Pro. It works fine over WiFi but not via the USB port. Says 'the cable is unplugged,' which is not true. I tried different cables to eliminate the thread as the problem.

The Mac does not generally consider USB to be a network protocol.

You have a reason why you think it should work?

Tags: Notebooks

Similar Questions

  • MacBook Pro can't see not camera in USB, El Capitan.

    My Macbook Pro doesn't detect USB camera, I see using the information system.  Other items in the USB ports are detected correctly.  It worked with 10.6.x (I think it was certainly pre - 10.6.8 10.6.4,), then I tried and failed to install 10.6.8 and stopped computer detection camera.)  Then I could to 10.6.8 then 10.11.1 upgrade, but it still doesn't detect camera.  Any ideas?  Thank you.

    One of them will solve your problem of camera:

    (1) If your Mac restart does not solve the problem,

    (2) use http://support.apple.com/kb/HT2090 from Apple.

    (BTW - troubleshooting section called an "iSight" camera.  However, after that article was published, Apple has changed the name of the built-in camera on the recent "iSight" Macs "FaceTime", then "FaceTime HD."  Whatever the name of your built-in camera, the same info and troubleshooting applies.)

    Be sure to test several Apple app (photo booth, FaceTime, iMovie, QuickTime Player, etc.) in more than one user account.  Do NOT use the 'Guest' for this test account.  If you don't have more than one user account for testing, create one now.  If you need help, how is explained in http://support.apple.com/en-us/HT201754.

    A 'Standard' user account is all you need for the tests.

    (3) If your camera will work correctly even with Apple applications, use OS X Recovery to completely reinstall your Mac OS since system recovery stored on your startup disk.  Don't bother test Skype or other 3rd party apps until you have your camera works with applications Apple.

    (4) If none of the suggestions above resolve your issue, contact Apple or one of the Apple-Authorized Service Provider to have your Mac professionally repaired. Don't forget to back up your Mac and Deauthorize iTunes before the call for tenders for the service.

    Post edited by: Jim EZ

    Mac OSX 10.11.1

  • MacBook Pro mid-2012 has a USB 3.0?

    Hi, I was wondering if my MacBook Pro mid-2012 has a USB 3.0 port. I wanted to connect a flash 3.0 player. If you can let me know that would be great thanks.

    Yes, he does.

    (142023)

  • Why should I pay $ 28 on the App Store for Pages on my old MacBook Pro when I have it for free on my new MacBook Pro on my iPad on my iPhone?

    Why should I pay $ 28 on the App Store for Pages on my old MacBook Pro when I have it for free on my new MacBook Pro on my iPad on my iPhone?

    And I could ask the same question for the calculator on the iPad?

    Something I don't understand here...

    Nice day!

    Yanick

    If you have used any other processor of professional quality (for example, Microsoft Word), and then just go ahead and use the current culture of free (financially) applications on devices you mention. It will not take too long before you understand point Apple of giving them. No application in the world can open documents Pages but the most recent version.

    Free will begin to erode when Pages for Mac forget how to open a perfectly fine document that you saved an hour or two ago. Or you realize you have to press the SHIFT key every time you want a first word in a sentence. Or you can not bind the text boxes to the text layout advanced stream. Or you can't do data merge / e-mail. Table of contents page links or comments will not export to PDF.

    Pages is not a clone of Word, and you'll quickly realize that Pages input/export deal with the translation. Open a blank document. Type the letter "A". Export to Word .docx. It will be 494KO in size. Do the same thing in LibreOffice or MS Word and it will be 8 KB.

  • ITunes on my old MacBook Pro does not recognize my new Iphone

    ITunes on my old MacBook Pro does not recognize my new Iphone... but apparently I can't download the new version of Itunes to this model of MacBook Pro? (according to the message that I get)... So I can't transfer my photos / apps / data, etc., for my new phone... Does anyone have advice?

    Thank you

    It is not so much the Macbook Pro model as what operating system your help, for example, if you're running Lion and trying to download Itunes for El Captian. Impossible to run your operating system which. Updates for your system come from apple. Ether through a software update or the Apple app store. Generally, you will receive a notification if an update is available. What operating system you're running and what Iphone model? IPhone 6plus has for example need OS 10.7.5 or newer.

  • Router WRT160N - Macbook Pro can connect but not Internet

    For some reason any my macbook pro can no longer access the internet wirelessly through my WRT160N. It works very well through a cable connected. I can even connect to the wireless router - full signal and get only one ip address, but it does not connect to the internet - via my browser - I get "cannot find server" and "internet connection doesn't seem to work." Or other applications that use the internet don't work.

    My mac has always been able to connect to other wireless routers. My router is the latest firmware.

    I tried a lot of the things I found in various forums - redo manual settings of router configuration on the router, security (WEP, WPA, unsecured) settings and one suggesting same zap the PRAM. Any Suggestions?

    If your MAC can connect to other networks / Wireless Router, it must do something with your wireless network...

    In this case a simple reset can help you solve your problem, you need to reset your router to default and then re - configure the router from scratch...

    To reset the router press and hold the reset button for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

    If your Internet Service is cable follow this link

    If your Internet Service is DSL follow this link

    Adjust the settings on your router wireless-

    Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...
    For wireless settings, follow these steps: -.
    Click on the Wireless tab
    -Here, select manual configuration... Wireless network mode must be mixed...
    -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

    -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
    Please take note of the name of the wireless network (SSID) because it's the network identifier...
    For wireless security: -.
    Click the sub-tab under wireless > Wireless Security...
    Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything...
    Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
    Please note the 1 WEP key as it comes to the security key for the wireless network...

    Click the settings advanced wireless
    Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
    Now let's see if you can locate your wireless network and try to connect...

    If you have a second see computer/laptop wireless if it connects to your wireless network of...

  • Windows XP pro, can not see desktop (just a blank screen) at startup. can access only via the Task Manager. How can I fix? __

    Windows XP pro, can not see desktop (just a blank screen) at startup. can access only via the Task Manager. How can I fix?

    In the Task Manager, click on "File" and select "new task (run).

    Type explorer.exe, and then press the ENTER key.

    If you are able to connect successfully to the windows, scan the entire computer using updated anti-virus software and check the virus.

  • Etrecheck shimming macbook pro / can't stop

    Here is a copy of my report to etrecheck.  MacBook Pro info in the report. Have you tried a second Etrecheck and he's basically freezing my computer where I have to stop and restart manually. Thanks for any help.

    EtreCheck version: 2.6.4 (224)

    Report generated on 27/11/15, 01:57

    Duration 02:55

    Download EtreCheck from http://etresoft.com/etrecheck

    Click on the links [click for support] to help with non-Apple products.

    Click on the links [click for more details] for more information on this line.

    Hardware Information: (Does that mean?)

    MacBook Pro (13-inch, mid-2012)

    [Click for plug technique]

    [Click here for the User Guide]

    MacBook Pro - model: MacBookPro9, 2

    1 2.5 GHz Intel Core i5 CPU: 2 strands

    4 GB of RAM expandable

    [Click here for upgrade instructions]

    BANK 0/DIMM0

    OK 2 GB DDR3 1600 MHz

    BANK 1/DIMM0

    OK 2 GB DDR3 1600 MHz

    Bluetooth: Good - transfer/Airdrop2 taken in charge

    Wireless: en1: 802.11 a/b/g/n

    Battery: Health = Normal - Cycle count = 739 - SN = W02284XG6D3LC

    Video information: (Does that mean?)

    Graphics Intel HD 4000

    Color LCD 1280 x 800

    Software: (Does that mean?)

    OS X El Capitan 10.11.1 (B 15, 42) - since startup time: less than an hour

    Disc information: (Does that mean?)

    HTS545050A7E362 disk HARD APPLE disk0: (500,11 GB) (rotation)

    EFI (disk0s1) : 210 MB

    HD (disk0s3) [recovery] recovery: 650 MB

    Macintosh HD (disk 1) /: 498,88 (Go 387,35 free)

    Storage of carrots: disk0s2 499.25 GB Online

    HL-DT-ST DVD - RW GS31N)

    USB information: (Does that mean?)

    Apple Inc. FaceTime HD camera (built-in)

    Apple Inc. Apple keyboard / Trackpad

    Computer, Inc. Apple IR receiver.

    Apple Inc. BRCM20702 hub.

    Apple Inc. Bluetooth USB host controller.

    Lightning information: (Does that mean?)

    Apple Inc. Thunderbolt_bus.

    Guardian: (Does that mean?)

    Mac App Store and identified developers

    Launch officers: (Does that mean?)

    [loading] com.adobe.AAM.Updater - 1.0.plist [click to support]

    Launch demons: (Does that mean?)

    [loading] com.adobe.fpsaud.plist [click to support]

    [operation] com.fitbit.galileod.plist [click to support]

    [loading] com.microsoft.office.licensing.helper.plist [click to support]

    User launch officers: (Does that mean?)

    [loading]   Fozhand.AppRemoval.plist [click to support]

    [loading]   Fozhand.download.plist [click to support]

    [loading]   Fozhand.ltvbit.plist [click to support]

    [performance]   Fozhand.Update.plist [click to support]

    [loading]   Manroling.Update.plist [click to support]

    [loading]   Otwexplain.download.plist [click to support]

    [loading]   Otwexplain.ltvbit.plist [click to support]

    [performance]   Otwexplain.Update.plist [click to support]

    [loading]   Perfetnight.AppRemoval.plist [click to support]

    [loading]   Perfetnight.download.plist [click to support]

    [loading]   Perfetnight.ltvbit.plist [click to support]

    [loading]   Perfetnight.Update.plist [click to support]

    [loading]   Portsayd.AppRemoval.plist [click to support]

    [loading]   Portsayd.download.plist [click to support]

    [loading]   Portsayd.ltvbit.plist [click to support]

    [performance]   Portsayd.Update.plist [click to support]

    [loading]   Swissfist.AppRemoval.plist [click to support]

    [loading]   Swissfist.download.plist [click to support]

    [loading]   Swissfist.ltvbit.plist [click to support]

    [loading]   Swissfist.Update.plist [click to support]

    [loading] com.adobe.AAM.Updater - 1.0.plist [click to support]

    [loading] com.adobe.ARM. [...]. plist [click for support]

    [operation] com.amazon.music.plist [click to support]

    [loading] com.citrixonline.GoToMeeting.G2MUpdate.plist [click to support]

    [loading] com.extensions.updater69337.agent.plist [click to support]

    [operation] com.spotify.webhelper.plist [click to support]

    Items in user login: (Does that mean?)

    iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

    Dropbox application (/ Applications/Dropbox.app)

    Canon IJ Network Scanner selector application hidden EX (/ Applications/Canon Utilities/IJ Network Scanner selector EX / Canon IJ Network Scanner selector EX.app)

    Hidden AdobeResourceSynchronizer Application (/ Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)

    The messages application (/ Applications/Messages.app)

    Fitbit connect Menubar Helper Application (/ Applications/Fitbit Connect.app/Contents/MacOS/Fitbit Connect Helper.app of the menu bar)

    Hidden Spotify Application (/ Applications/Spotify.app)

    Other applications: (Does that mean?)

    [operation] com.adobe.PDApp.AAMUpdatesNotifier.15392.1954061E-E630-4023-AC9B-3331CB5EAAFE

    [ongoing] com.Apple.XPC.launchd.oneshot.0x10000002.EtreCheck

    [ongoing] com.fitbit.GalileoMenubar.91552

    [ongoing] com.getdropbox.dropbox.48672

    [ongoing] com.HP.devicemonitor

    [ongoing] com.spotify.client.65312

    [ongoing] jp.co.canon.ij.CNSSelectorAgent.92192

    Plug-ins Internet: (Does that mean?)

    FlashPlayer - 10.6: Version: 19.0.0.245 - 10.6 SDK [click for support]

    QuickTime Plugin: Version: 7.7.3

    AdobePDFViewerNPAPI: Version: 11.0.13 - 10.6 SDK [click for support]

    AdobePDFViewer: Version: 11.0.13 - 10.6 SDK [click for support]

    Flash Player: Version: 19.0.0.245 - 10.6 SDK [click for support]

    EPPEX plugin: Version: 10.0 [click for support]

    Default browser: Version: 601 - SDK 10.11

    RL Secure Layer plugin: Version: Unknown - SDK 10.5 [click for support]

    SharePointBrowserPlugin: Version: 14.5.8 - 10.6 SDK [click for support]

    Silverlight: Version: 5.1.30514.0 - 10.6 SDK [click for support]

    iPhotoPhotocast: Version: 7.0

    User Plug-ins internet: (Does that mean?)

    CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [click to support]

    UploadManager: Version: Unknown - SDK 10.5 [click for support]

    ContentManager: Version: Unknown - SDK 10.5 [click for support]

    RocketEngine: Version: Unknown - SDK 10.5 [click for support]

    Safari extensions: (Does that mean?)

    HoverSee

    3rd party preference panes: (Does that mean?)

    Flash Player [click for support]

    Time Machine: (Does that mean?)

    Skip system files: No.

    Mobile backups: OFF

    Automatic backup: NON - automatic backup disabled

    Volumes to back up:

    Macintosh HD: Disc size: 498,88 GB disc used: 111,53 GB

    Destinations:

    Time Machine [Local] backups

    Total size: 499,76 GB

    Total number of backups: 15

    An older backup: 24/08/12, 11:41

    Last backup: 01/11/15 16:02

    Size of backup drive: adequate

    Backup size GB 499,76 > (disc 111,53 GB X 3)

    Top of page process CPU: (Does that mean?)

    40% mdworker (16)

    11% com.apple.iCloudHelper

    4% WindowServer

    3% kernel_task

    2% spotify Helper (2)

    Top of page process of memory: (Does that mean?)

    Kernel_task 559 MB

    270 MB mdworker (16)

    246 MB Spotify Helper (2)

    Com.apple.WebKit.WebContent 238 MB

    111 MB messages

    Virtual memory information: (Does that mean?)

    104 MB free RAM

    3.90 used GB RAM (993 MB cache)

    Used Swap 0 B

    Diagnostic information: (Does that mean?)

    27 November 2015, 01:34:11 /Library/Logs/DiagnosticReports/galileod_2015-11-27-013411_[redacted].crash

    27 November 2015, 01:19:53 /Library/Logs/DiagnosticReports/galileod_2015-11-27-011953_[redacted].crash

    27 November 2015, 01:08:24 Self test - passed

    26 November 2015, 01:34:26 /Library/Logs/DiagnosticReports/galileod_2015-11-26-013426_[redacted].crash

    26 November 2015, 01:15:21 /Library/Logs/DiagnosticReports/galileod_2015-11-26-011521_[redacted].crash

    November 25, 2015, 20:25:13 /Library/Logs/DiagnosticReports/galileod_2015-11-25-202513_[redacted].crash

    November 25, 2015, 19:50:37 /Library/Logs/DiagnosticReports/galileod_2015-11-25-195037_[redacted].crash

    November 25, 2015, 16:41:09 /Library/Logs/DiagnosticReports/galileod_2015-11-25-164109_[redacted].crash

    November 25, 2015, 14:05:35 /Library/Logs/DiagnosticReports/galileod_2015-11-25-140535_[redacted].crash

    November 25, 2015, 12:08:56 ~/Library/Logs/DiagnosticReports/AppAS_2015-11-25-120856_[redacted].crash

    November 25, 2015, 12:08:56 ~/Library/Logs/DiagnosticReports/AppRP_2015-11-25-120856_[redacted].crash

    November 25, 2015, 01:58:18 ~/Library/Logs/DiagnosticReports/AppRP_2015-11-25-015818_[redacted].crash

    November 25, 2015, 01:58:18 ~/Library/Logs/DiagnosticReports/AppAS_2015-11-25-015818_[redacted].crash

    November 24, 2015, 14:08:28 ~/Library/Logs/DiagnosticReports/AppRP_2015-11-24-140828_[redacted].crash

    November 24, 2015, 14:08:28 ~/Library/Logs/DiagnosticReports/AppAS_2015-11-24-140828_[redacted].crash

    November 24, 2015, 02:01:06 ~/Library/Logs/DiagnosticReports/Adobe Photoshop Elements Editor_2015-11-24-020106_ [redacted] .crash

    1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

    The test works on OS X 10.7 ("Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

    Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

    2. If you have already a current backup backup all data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

    There are ways to back up a computer that is not fully functional. Ask if you need advice.

    3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

    You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

    In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, so any person with the required competence can check what it does.

    You may not be able to understand the script yourself. But variations of it have been posted on this site of thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

    Another indication that the test is safe in this threadand this onecan be found, for example, where the comment in which I suggested it was recommended by one of the specialists of the communityApple, as explained here.

    However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

    4. here is a general summary of what you need to do, if you decide to go forward:

    ☞ Copy a particular line of text to the Clipboard.

    ☞ Paste into the window to another application.

    ☞ Wait for the test to run. It usually takes a few minutes.

    ☞ Stick the results, which will be copied automatically, in a response on this page.

    These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

    5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

    You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

    6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

    7 load the linked web page (the site "Pastebin.") The title of the page is 'Diagnostic Test'. Under the title is a text box, headed by three small icons. The right one represents a Clipboard. Click on this icon to select the text, then copy to the Clipboard of your computer by pressing Control-C key combination.

    If the text is not highlighted when you click the icon, select it in triple - click anywhere inside the box. Do not select the whole page, just the text in the box.

    8. start the Terminal application integrated in one of the following ways:

    ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

    ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad and start typing the name.

    Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

    9. If you see an error message in the Terminal as "Syntax error" or "Event not found", enter

    exec bash

    and press return. Then paste the script again.

    10. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

    If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

    If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

    11. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

    [Process started]
            Part 1 of 4 done at … sec        …        Part 4 of 4 done at … sec
            The test results are on the Clipboard.
            Please close this window.
    [Process completed]

    The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

    Wait for the final "Process complete" message. If you don't see it in about 15 minutes, the test probably won't be all within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something. If you close the window of the Terminal, while the test is still running, the partial results will not be saved and you have to start over.

    12. when the test is finished, or if you have stopped it because it was taking too long, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

    At the top of the results, there will be a line that begins with the words «Start time.» If you do not see, but rather to see a mass of gibberish, you don't expect the "Completed" message is displayed in the Terminal window. Please wait and try again.

    If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

    13. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

    If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

    14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but what're told you to do maybe not. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

    ______________________________________________________________

    Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the "Test of diagnosis" referenced), I reserve all rights except as provided in the terms of use agreement for the site of Apple support communities ("CSA"). ASC readers can copy for their personal use. The whole nor any part can be redistributed.

  • MacBook Pro not recognizing the Cougar USB install

    I have a Macbook Pro 5.2-17 "retina display. I replaced the hard drive and I am installing Mountain Lion. The hard drive is not an SSD. It's a 500 GiB Western Digital SATA, partitioned with TPG and JHFS +.

    I started by installing El Capitan, because that's all I had. The installer of El Capitan is on an external USB drive that is partitioned. When I boot using the down Option key, the C key or command-R, the installer of El Capitan is recognized. I installed El Capitan, created an installer of Mountain Lion on a different partition on the same external USB drive and erased El Capitan the internal hard drive. When I boot on the USB setup of Mountain Lion is not recognized. Setup of El Capitan is recognized correctly. Why not available in boot manager during startup? When I got El Capitan installed, the two partitions have been recognized very well when I plugged in the USB. Both were mounted and appears on the desktop. So I know that the problem is not the USB key, or 2.0 or 3.0, or the recovery partition because I erased the disc and the recovery partition is no longer exist. How can I get the installer of Mountain Lion to be recognized at startup?

    I did the command Option P R, NVRAM reset several times. No joy. The only partition recognized at boot time is the installer of El Capitan.

    I want to level back to Mountain Lion because it is less intrusive than El Capitan and will be more familiar to the person who will use this computer.

    Oh, and more than two elements. When I start the installer for OS X from the external USB drive, I gives me three options on where to install TO - install OS X El Capitan, install OS X Lion mountain and Macintosh HD. Therefore the partition setup of Mountain Lion is recognized, but not as an installer to start from. Although when I plugged in the USB port when El Capitan was installed he showed as an installer Mountain Lion.

    Also, there is NO option to choose where to install FROM. If I have two installation programs, I have two choices of installation?

  • A used macbook pro can be saved?

    I have a used macbook pro and do not know to whom it belonged originally. Can she be saved?

    Try entering your serial number here. https://checkcoverage.Apple.com

    Kim

  • Load to the helmets on Macbook pro through the interface audio usb external keyboard outputs to the inputs 3-4

    I'm trying to understand why there is a load on the output on headphones output Macbook Pro external keyboard outputs 1-2 going on 3-4 the corresponding inputs of the audio interface.  I am interested to know if anyone has something similar.

    Default logic on your stereo Out as the default output of your tracks. The inputs of your tracks have nothing to do with it. If the third line above the control Out stereo says Pan, you can click on it and change it. I hope this helps.

  • My 2012 macbook pro mid has a 3 USB port

    my macbook pro has a USB 3 port and if so, what port is it?

    Both are its USB 3.0 ports.

    (137463)

  • HDR Pro, can't see the buttons SAVE or quit SMOKING

    Photo files open and merge to HDR pro, but it seems resizes the window and I can't see SAVE or CANCEL buttons down, do FORCE QUIT to exit. I tried to resize the window, zooming, changing the Prefs system display resolutions. I took my old iMAC from 5 months to the Apple store and they think it's CS5. Any ideas?

    Do you mean cmd/opt/esc to force quit?

    No, I meant to leave the dialog in absence or the Cancel button inavailabilty; But if you followed the issue already you probably all of us who are already trying to anyway.

  • Windows 7 Pro Backup can not see my USB external hard drive.

    This seems to be an old problem, maybe someone has a solution:

    I have a Toshiba 150 GB NTFS USB 2.0 external hard drive I used as backup when I had XP, but now I have W7 Pro 64-bit (SP1), and the backup program is unable to see the player.

    It shows in Explorer, it works very well, has write permission, but is not in the list of Backup Options.

    Player is 18 months old. W7 found and installed the USB driver for it.

    It is wired, I don't have a network.

    In addition, Windows cannot format the drive.

    I changed the drive letter of that W7, named F to Z, no go.  All I see in the backup is C and the DVD player.

    It has been suggested that I have uninstall all the drivers USB and reboot and let Windows reload them, but I have a keyboard and a mouse USB, so if I do that has no way to control the computer.

    How can I make the visible external drive for the backup program? Any help is appreciated.

    I use Ghost on my 8 month, Toshiba Satellite L755 and have never seen a conflict.  I also have it on 3 desktop computers.  For antivirus I use AVG free on 3 systems, Symantec SEP on that and Norton Security Suite on the laptop (which I get for free from Comcast).  The only thing related to security, I see in the menu start from Ghost 15 is a small window to give people access to Ghost.  He also built in the feature called Threatcon, which I've never had any message of.  Here's the info of the construction in the help.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    On Symantec ThreatCon

    ThreatCon is threat of Symantec early warning security system. When Symantec identifies various threats, the ThreatCon team adjusts the level of threat. This adjustment gives people and adequate warning systems to protect against attacks and data systems.

    When you activate the trigger of Symantec ThreatCon to a selected backup job, Norton Ghost detects changes in the threat level. Your computer must be connected to the Internet, at the time. If the ThreatCon level is reached or exceeded, the backup operation in which you have enabled Symantec ThreatCon is started automatically. You have then a recovery point to use to recover your data to your computer should become affected by the latest threat.

    Note:

    If your computer is not online, then it is not sensitive to online threats. But if you connect your computer to the Internet at any time, it becomes vulnerable. You don't have to enable or Disable Symantec ThreatCon when you go on or off line. Works if you're online, it doesn't matter if you're offline.

    For more information about Symantec ThreatCon, visit http://www.symantec.com.

    ~~~~~~~~~~~~~~~

    Good luck.

  • MacBook Pro not recognize Flash Drive/USB

    Hi all

    I'm reading the display, but I am still having problems with the connection of external drives directly (to the two USB ports or over the network).

    More recently, I got a new USB Flash drive that can connect to my iPhone, iPad 12 "Pro and even my older laptop Samsung Galaxy AND when connected to a PC, they all read, I even downloaded and installed the app on my iPad and iPhone to read and use the drive (drive Mobile, i-USB-Stocker).

    I have Apple Care and reached out to their troubleshooting why and was advised that if he isn't an Apple drive, unit of time machine, or essentially bought in a store so that they will not support it.

    I use and hub USB external to add other readers USB, and these work fine.  I have looked at the system report and think I found the device, but do not yet appear on finder or display on the desktop like any other.

    Product ID: 0 x 6998

    Vendor ID: 0x0b27 (Ritek Corporation)

    Version: 1.05

    Serial number: FB5BB61E

    Speed: up to 480 Mb/s

    Manufacturer: generic

    Location ID: 0 x 14240000 / 17

    Available current (mA): 1000

    Current (mA): 200

    Additional operating current (mA): 0

    Capacity: 63,44 GB (63,438,848,000 bytes)

    Removable media: Yes

    Removable drive: Yes

    BSD name: disk2

    Partition map type: MBR (Master Boot Record)

    Volumes:

    WORKINGFILE:

    Capacity: 63,44 GB (63,437,672,448 bytes)

    Available: 14.69 GB (14,692,286,464 bytes)

    Writable: Yes

    File system: MS-DOS FAT32

    BSD name: disk2s1

    Mount point: / Volumes/WORKINGFILE

    Content: DOS_FAT_32

    Volume UUID: 102893CC-83F6-324B-AFD1-8233E4579C35

    Any suggestion would be appreciated.  I've been a MAC user for a total of 3 months and having a good time with the passage of PC, but it's very disturbing.

    Thanks in advance for the help.

    If you go to Applications/Utilities/Disk Utility, the fact the drive?

    See article 1 article linked.

    Disc disassemble using Terminal Server

    Fixing strength disk-disk utility

Maybe you are looking for