MacBook pro disk filled in or not? Also have the battery flat.

Similar Questions

• To Word on MacBook Pro photo collage, photo is not displayed, but the cursor moves to the bottom of the page. Tried rebooting already

  I try to copy and paste a picture of Word on a MacBook Pro, but it does not show. The cursor moves to the right distance to the bottom of the page and by positioning the mouse on the space shows that it is there, just invisible. I tried to reboot twice.

  Thanks for any help!

  It is the forum Pages.

  Have you tried Microsoft Word for Mac forum?

  Peter

• MacBook Pro won't feed - need to disconnect/reconnect the battery.

  I have a 'early 2011' MacBook Pro 17 "which does not illuminate when the power switch is pressed.    He worked normally in the last time it was used.

  I'm a PC I / specialist t so I did some fault finding.  Here are the results and measures, I tried:

  1. Power button and no indication button has been pressed.
  2. Button on the side and he said fully charged battery.
  3. Adapter a/c and LED power connector attached LED lights up in green as it is supported.
  4. You press the power button - still no indication of any attempt to power on.
  5. Let Reset SMC pressing SHIFT, control, Option, and power switch.  All released.   You press the power button - still no indication of any attempt to power on.
  6. Power button which is held down for 15 seconds, released, then no hurry once - no change.
  7. Disconnected a/c power.
  8. Removed the back cover.
  9. Battery disconnected from the system board connector.
  10. Connected a/c adapter and power button pressed - no change.
  11. Disconnected the a/c adapter.
  12. Back in the connected battery system board connector.
  13. Joint a/c adapter and the system performed a reset, then IPL upward and ran normally.
  14. System "Shut down" and then press the power button - would not be back.
  15. Removed the a/c adapter and pressed the power button - still wouldn't back off.
  16. Disconnected a/c adapter, disconnected the battery, battery reconnected to the system board.  Power button - will not turn on.
  17. Repeat the procedure which worked previously - a/c offline, disconnected battery system board, connected a/c, press button power (no signs of activity), disconnected a/c, battery reconnected to the governing body of the system, reconnected a/c and it reset and power!
  18. Let system and then "reset" (instead of closing) - it restarts correctly.
  19. Shut down the system and then I tried to power - will not turn on.
  20. Bottom line: it seems that the procedure which will get the system starts, after it is closed: disconnected a/c, disconnecting the battery system board, connected a/c, press power button (no signs of activity), disconnected a/c, reconnected battery to the system board, reconnected a/c and it resets and starts.

  OK, so you MacBook Pro experts out there... what seems to be the problem and what measures would you recommend I take?

  THX,

  Jeff

  Hi Jeffrey,.

  Welcome to Apple Support communities.

  Looks like you did some troubleshooting while trying to solve the problem with your MacBook Pro turns is not on. The article below provides some additional troubleshooting steps that should help you further isolate and resolve service installation or question.

  If your Mac will not turn on - Apple Support

  See you soon.

• I have a Macbook pro (2011 model). It gets stuck on the start screen on to half way through commissioning. This happens whenever the mac turns on. The problem is solved when I reinstall Yosemite to boot to Recovery Mode disk utility.

  I have a Macbook pro (2011 model). It gets stuck on the start screen on to half way through commissioning. This happens whenever the mac turns on. The problem is solved when I reinstall Yosemite to boot to Recovery Mode disk utility. However, the next time you start, the startup process is blocked to halfway to new (on the screen with the toolbar and the status of apple). I want a more permanent solution to reinstall the operating system every time. Would appreciate someone's suggestions and thanks in advance.

  Replace your hard drive.

  You have a backup of trust? If not, buy a disc of exterrnal for that as well.

  The progress bar from the left end at the beginning of the commissioning indicates that your drive has been so damaged, it could not be mounted. Five minutes of progress bar is shown as it does the equivalent of disk utility (ERD [Directory]). If you have reinstalled several times and the problem is not fixed, your drive is in solid form.

• Hello! I've got CS3 Design Standard - real records and certificate of software license. It was installed on my laptop that crashed and could not be uninstalled. I have now installed on my new MacBook Pro, but can't get it registered with the

  Hello! I've got CS3 Design Standard - real records and certificate of software license. It was installed on my laptop that crashed and could not be uninstalled. I have now installed it on my new MacBook Pro, but can't get it registered with the serial number. Is it because it has not been uninstalled on the previous laptop? What should I do now? THX!

  Maybe this can help someone else...  I had to simply properly uninstall CS3 and reinstall again after that.  I think what he sort!  I also remember having a similar problem with the Mac at work a couple of years back.  Not sure if it is the same for CS5/CS6.  Here is a link on how to properly uninstall CS3 on Windows XP, Windows Vista and Mac OS.  I'm on OS X 10.9.2 but it works beautifully.  Remove from Creative Suite 3 and CS3 products

• Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is restless))

  Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is agitated and it is not difficult to work with him because I like and what I should I do?))

  Serial number C02FD2CPDF8V

• macBook Pro 10.5.8 does not update Safari Firefox Google. Why? What should do?

  macBook Pro 10.5.8 does not update Safari Firefox Google. Why? What should do?

  You need to grade 12 to OS x 10.6.8 via DVD you can get here:

  http://store.Apple.com/us/product/MC573/Mac-OS-x-106-Snow-Leopard

  Full DVD 10.6.3 to 10.6.8 update via software update. Then either update to El Capitan if your hardware allows

  http://www.Apple.com/OSX/how-to-upgrade/?CID=WWA-us-KWG-Mac

  or if your hardware allows go Lion lion

• iMAC and MACBOOK Pro user.  CC for member photographers.  the iMAC in Photoshop CC2015 and LR upgrade went well.  Update of the MacBook is showing that trial versions, not permanent.  How can I fix it?

  iMAC and MACBOOK Pro user.  CC for member photographers.  the iMAC in Photoshop CC2015 and LR upgrade went well.  Update of the MacBook is showing that trial versions, not permanent.  How can I fix it?

  Go to Adobe Creative Cloud

  Hello

  Please check the help below document:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Kind regards

  Sheena

• I downloaded and installed Photoshop elements 11 on my new Macbook Pro.  Why can I not see my scanner (Epson Perfection 3200 Photo) of the file > Import menu?

  I downloaded and installed Photoshop elements 11 on my new Macbook Pro.  Why can I not see my scanner (Epson Perfection 3200 Photo) of the file > Import menu?

  There was no updated driver available (he says that my driver was aware), so I just deleted the scanner and the computer restarted.  When he came, the scanner has already been added again.  With great anticipation, I tried to import Photoshop... but no luck (scan was not visible).  I finally ended up calling Epson (had a lot of difficulty finding a support number) and they me finally there is no update driver for OS X 10.10 and I should like a work around using "Image Capture" application  I tried it and it works very well.

• Why my Macbook Pro boot used place in any mode but the comments?

  My Macbook Pro almost 5 years, worked very well, then the beech ball began to come a lot and programs would take forever to load. I tried to stop him to restart in diagnostic mode, but it would not closed and just hung up for about an hour.  I hit the power button to force a power down and when I went to turn it on again, it does not start in safe mode or diagnosis.  He goes to the login screen and gives me the choice of my log in or invited, but starts if I select my journal going through the motions leading to the top of the load bar, but before he gets to the end, she stops.  I can start in guest mode and access the internet, but I can't do anything from there.  If I click on the Apple, it gives me the opportunity to go to the startup disk, and when I click it, it asks which drive I use, (only one option, HARD drive), but when I select it, there is nothing there.

  I can't really afford a new Macbook for now, and until the last few days it works very well, so I prefer to get it fixed to the top if I can, so any help is appreciated.

  See you soon,.

  Troy

  Hey there,

  I see your message that you are unable to connect to your user account, even in safe mode.  I would like that you try to start your computer in OS X Recovery and then try to repair your hard drive.  If the problem persists after that, you can reinstall OS X.

  To start your computer from recovery, restart your Mac and press the command and R keys at startup.

  

  Hold these buttons until the Apple logo appears. After your computer has finished starting upward, you should see a desk with an OS X menu bar and window OS X Utilities with the above options. If you see a login window or your own office instead of the utility window, it is possible that you do not press command + R early enough. Restart your computer and try again.

  Choose the option you want to use from the utility window or in the Utilities menu.

  OS X: on OS X Recovery

  Take care.

• Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another progr

  Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another program.

  Hi rkusa1,

  Thank you for using Microsoft Windows forum

  QuickBooks worked very well under Vista? It should also work reliably on Windows 7.

  However, you may want to follow these steps.

  1. right click on your quickbooks start exe file and open properties.

  2. on the Compatibility tab, select the compatibility mode and run this program in compatibility mode for Windows using the following link: http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows (only if she worked very well with former Windows operating system)

  3. the control privilege level "Run this program as Administrator". Press apply/OK to close properties.

  4. start - devices and printers - add a printer - add a local printer - create a new port - local port and name it QBD_PDF.

  5. Choose install AMYUNI Technologies - Amyuni Document Converter 300 (click the button update windows if it is not on your list).

  6. If windows detects you already have a driver and then choose to replace the current driver. The printer name Quickbooks PDF Converter - do not share the printer - NOT set as the default printer. Finishing

  7. start right click - devices and printers - printer QB, choose printer - properties and go to the Advanced tab.

  8. remove the checkmarks in the 4 elements with square next to them (lower part of the screen) boxes, and then select "Print directly to the printer" press OK to close the window.

  9 restart you computer and open Quickbooks. Open the file - printer installation and make sure of Quickbooks PDF Converter is selected for any operation PDF printer that you use frequently. (on rare occasions, you will see not of Quickbooks PDF Converter on the list, reboot again and you'll get it).

  You can now perform operations of PDF in Quickbooks (works for 32 and 64-bit Windows 7)

  For a similar question, see: http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/2bd30024-0a64-4f6b-a831-8cb7c1e4cce5

  If the steps above do not post your question in this link: http://community.intuit.com/quickbooks

  Kind regards
  Aziz Nadeem - Microsoft Support

• Failure of Adobe Camera Raw 9.3 dmg for Sony RX1RII with MacBook Pro OSX El Capitan 10.11.5 [using the CS6]

  While Adobe says his record the FIRST 9.3 update plug-in for Adobe Photoshop CS6 (Extended) strives to convert directly from the RXRII of Sony camera RAW files, is not. Maybe my MacBook Pro OSX El Capitan 10.11.5 exceeds the 10.11 noticed on the Adobe Camera Raw graph?

  Please notify.

  CS6 can only be updated up to a maximum of ACR 9.1.1 to install cab 9.3 in CS6, attempts fail.  You can check which version you have by any plug-in / Camera Raw (I think on a Mac).

  You can register CC (LR+PS@$120/yr=$10/mo is the least expensive) or use the DNG Converter to DNG for raw files and the DNG, but not the native raws, open in your older software.

  The DNGC is here: http://www.adobe.com/downloads/updates/

• I tried to download Adobe Premier on my Macbook Pro and it says I don't have enough room.  How much room do I need?  If I use the cloud version, how much room do I need?

  I tried to download Adobe Premier on my Macbook Pro and it says I don't have enough room.  How much room do I need?  If I use the cloud version, how much room do I need?

  Mac OS

  • Processor Intel multicore with 64-bit support
  • Mac OS X v10.9 or v10.10
  • 4 GB of RAM (8 GB recommended)
  • 4 GB of disk space available for installation. additional space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
  • Additional space required for preview files and other files to work (10 GB recommended)
  • 1280 x 800 display
  • Hard drive 7200 RPM (multiple fast disks configured in RAID 0 recommended)
  • QuickTime 7.6.6 software required for QuickTime features
  • In option: GPU card Certified Adobe for GPU acceleration
  • Recording and Internet connection are necessary for activation of the software required, validation of subscriptions, online access to services *.

• I've upgraded to the new operating system and now my MacBook Pro is in trouble.  Should I uninstall the new system and if so how?

  I have upgraded to the new operating system, El Capitan 10.11.4, and now my MacBook Pro is in trouble.  Should I uninstall the new system and if so how?

  Restore the backup that you did when you replaced the old system

• Should I upgrade my macbook pro at el capitan 2015? How is the performance on elcapitan? give your opinion! Thank you :D

  Should I upgrade my macbook pro at el capitan 2015? How is the performance on elcapitan? give your opinion! Thank you

  My iMac with 8 GB or RAM 2011 works very well with the 10.11.2 was last updated. It is up to you to decide. It should work perfectly on almost any new machine of 2015.