MacBook Pro opens to the screen and progress bar gray, freezes when the progress bar ends. Have tried several options to get into safe mode and suggested strikes, but can't. Any suggestions?
MacBook Pro opens to the screen and progress bar gray, freezes when the progress bar ends. Have tried several options to get into safe mode and suggested strikes, but can't. Any suggestions?
Here are some links from Apple which may help
How to choose a boot on your Mac - Apple Support drive
On the screens, you see when you start your Mac - Apple Support
Tags: Notebooks
Similar Questions
-
As mentioned above, this is a new system, but with a more older IDE hard drive with windows xp pack 2 service (I think). When you first start, it says that windows is not stopped correctly and asks me to choose whether to start it normally or without failure or last known working configuration. When I choose to start windows normally, it will load up to a point. The screen of Windows Xp will come with the slide bar. It will then restart. When I choose to start in safe mode, a bunch of 32 file system scrolls upwards on the screen. I don't remember if it of normal or not. He takes over in SafeMode but. I went to the event viewer and got the following errors.
Event type: error
Event source: Service Control Manager
Event category: no
Event ID: 7026
Date: 21/01/2011
Duration: 01:18:54
User: n/a
Computer: CLEAR-ZONE of the
Description:
The next (s) starting or starting system could not load:
AFD
Avgldx86
AvgMfx86
Avgtdix
FIPS
IPSec
MRxSmb
NetBIOS
NetBT
Processor
Rdbss
Rdbss
Tcpip
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Event type: error
Event source: Service Control Manager
Event category: no
Event ID: 7001
Date: 21/01/2011
Duration: 01:18:54
User: n/a
Computer: CLEAR-ZONE of the
Description:
The IPSEC Services service depends on the IPSEC driver service which failed to start because of the following error:
A device attached to the system does not work.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Event type: error
Event source: Service Control Manager
Event category: no
Event ID: 7001
Date: 21/01/2011
Duration: 01:18:54
User: n/a
Computer: CLEAR-ZONE of the
Description:
The Hello Service service depends on the service protocol driver TCP/IP which could not start due to the following error:
A device attached to the system does not work.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Event type: error
Event source: Service Control Manager
Event category: no
Event ID: 7001
Date: 21/01/2011
Duration: 01:18:54
User: n/a
Computer: CLEAR-ZONE of the
Description:
TCP/IP NetBIOS assistance service depends on the AFD service which failed to start because of the following error:
A device attached to the system does not work.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Event type: error
Event source: Service Control Manager
Event category: no
Event ID: 7001
Date: 21/01/2011
Duration: 01:18:54
User: n/a
Computer: CLEAR-ZONE of the
Description:
The DNS Client service depends on the service protocol driver TCP/IP which could not start due to the following error:
A device attached to the system does not work.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Event type: error
Event source: Service Control Manager
Event category: no
Event ID: 7001
Date: 21/01/2011
Duration: 01:18:54
User: n/a
Computer: CLEAR-ZONE of the
Description:
The DNS Client service depends on the service protocol driver TCP/IP which could not start due to the following error:
A device attached to the system does not work.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
I did find something online that contains all the system boot or start specific drivers. Windows and harddrive was working in another computer just before he was switched. Let me know if you need other information.
Thank you.
First of all you are missing probably a number of device drivers, particularly the network card driver and the driver of the motherboard. Use your XP disk to perform a repair installation. This should go a long way toward you're going to get. If your new box has a driver disc that should help a lot. You can't port XP perfectly the way you did. It usually requires a repair installation to fix the hardware abstraction layer. Colin Barnhorst
-
I tried a few things to get my sound. am in safe mode and can't find a way to go back to normal mode, I fixed my sound
I have no sound. I have an emachine that less old of one year here I tried Click START TYPE MSCOFIC HIT ENTER ON BUTTON EDGE WENT to UNCHECK SAFE MODE click APPLY & OK there is no having worI
I have fixed my sound I restored in eight days and it worked
A moderator has moved this thread to the music and its Forum.
Hi, James.
Try this:
In the box to start the search , click Start .
- Type msconfig and press ENTER.
If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.
Click on the Startup tab
If secure boot option ensure that you do not have checked (no options must be checked)
If you, uncheck the box
Click on apply (you can then restart windows or go to the next step)
- On the general tab, click Normal Startup - load all drivers of devices and services, and then click OK.
- When you are prompted, click restart.
http://support.Microsoft.com/kb/331796
Edit: No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
-
Running dual core intel 1.83 cpu with 1 GB of memory. tried to update windows and microsoft security essentials.
in the middle of windows update... firm pc... would not go to the office re-boot (got symbol very small windows sidebar)...
in Windows Update safe mode would not search for updates, has given > [error number: 0x8007043C]
What can I do to solve this problem and start successfully for win xp pro sp3?
Thank you.
Charlie
Hello
I suggest you to follow the steps in this link and check if it helps:
http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/error-number-0x8007043c-the-website-has/55899f79-0cc2-4A10-b4f8-8de2b5e8de40It will be useful.
-
Blue screen stop: error 0 x 00008086 cannot even get into safe mode
Hello
I have a huge problem with my laptop. Whenever I have load it I get a blue screen and the "technical information" STOP: 0 x 00008086. I saw answers to this when it is suggested that you go in safe mode and then follow the steps from there, but when I press F8 I get a loud beep and the computer carries its load before coming with the same blue screen.
I am able to enter the configuration utility (F2) and the Boot Manager (F12), but that's all.
Help would be massively appreciated
Thank you
Hello
The lower part of this statement for Mary a troubleshooting tool an ERD
who can help. These must of course be made on another computer with a
CD burner that can run XP, Vista or Windows 7 as the process uses
No files from the host computer.Here is another method.
How to create a Vista recovery disk - free
http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html===============================
Toshiba - Forums
http://laptopforums.Toshiba.com/Toshiba - Contacts
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contactToshiba - drivers - access your model
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=downloadToshiba - Support
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jspI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">
-
Whenever I try to open Firefox, it only open the crash reporter. When I press "Restart Firefox", it just opened another journalist to crash. I use a PC.
I tried all of the following characteristics, does not:
1. reboot the computer
2. system restore
3. Uninstall and reinstall (done this several times)
4 remove the Firefox installation folder
5. try to create a new profile / use the Profile Manager using "C:\Program Files\Mozilla Firefox\firefox.exe" - P, firefox.exe-p and firefox.exe - profilemanager - and all of this was, once again, open the crash reporter
6 safe mode - literally impossible even to open Firefox so I don't know how I could do thatI am at a loss. Any help would be greatly appreciated.
OK, if %AppData% does not lead you in the right place you can also manually navigate to the folder with incident reports (you may need to turn on the display of the first hidden files). It is located in C:\Users\ < your user name > \AppData\Roaming\Mozilla\Firefox\Crash Reports\submitted...
-
What is the error code 646? I get this when I try to install the update KB977304. I tried to install this update several times.
Look at the point previously addressed in http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/30624d26-942d-49ad-88b2-250514e92a9a/ I hope this helps.
Good day. -
Juice spilled under MacBook pro 13 "early 2011 a1278 and he died. Can I still save it.
at about 19:00 2 days ago, I spilled juice on my MacBook, and I freaked out so I deleted for awhile and then hurried to dry off the coast. I then continued turning power on and off until it dies eventually completely. I know now that all the mistakes I made so what I did after he died was I opened the back and let dry. After more research I found some guides on how to clean the contents of the folder correctly, but all the stores have already closed at that time so I waited until the next day to buy all the tools and denatured alcohol and proceeded to disassemble the product and clean following the guide. I then waited until about 2 hours before now to go up the MacBook and the battery showed 1 green light but nothing else has worked, not even the light on the charger lights up. I opened and found that a partbof map logic heated very quickly when I plug the charger. So my main question is whether or not my MacBook still salgeavable or not. Help, please.
Where I am right now 19:40
-
Restart Windows xp continues and in the end, the blue screen of death leaves the following error: 0X0000007B (0XF78D2524, 0XC0000034, 0x00000000, 0x00000000) can anyone help?
If your machine is blue-screening after booting from the XP installation disk, it suggests that your problem is with the hardware rather than auto-run.
I recommend taking your machine to a local service shop, unless you are confident enough rooting in the bowels of your computer.
Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers
-
No signal when start and can't get into safe mode.
So, I have an E machine with microsoft xp on it. And last night I lost the signal of the monitor. But I just restarted it and she came back. But he started for about every five minutes after re boot. I put it in save mode, and he continued to do so. And then when I started again, there was a "serious error of microsoft" and I sent the error to microsoft, as well as something active desktop. Showing all the reasons of what can happen. My computer is really slow so I decided to just drive with flash reprogramming CD, I put in and restart it and I don't get any signal constantly even now when I reboot... Please help, thanks.
Hi andreasburlet,
· You see a message on the screen?
· Have you checked for fine connections?
· Do you want to say that you tried to reinstall Windows XP?
Method 1: Ensure that all connections on the monitor are tight.
Method 2: Connect and disconnect a RGB cable can help them as well and that could ensure a good signal. Look at the end of the cable to see if you have all the appropriate pins.
Method 3: You can also try with another monitor, if possible. It could also be your video card. See if it is connected. If you are not comfortable doing so, communicate with a known person.
-
Computer laptop blue started upward, can't get into Safe Mode. A way to recover the files?
Laptop was not load its on the inside before, after a week, I've sorted the problem. but somehwere an along the line of this week, that my windows 7 ultimate decided he wanted me messing around. laptops left on now but does not boot to windows. I tried a system restore, I want to avoid a clean sweep of windows if possible because it is files that I need on my hard drive. Is it possible for me to access my files? If this is not what is the easiest way to sort my laptop?
Luqman > what is the easiest way to sort my laptop? >>>
OK, you ready for the big guns now. First of all, turn your machine so that you can read the SNID. Then, pull out your credit card. Thirdly, connect on http://us-store.acer.com/rcd/ 8 ^)
Jack E/NJ
-
Problems with windows update, run sfc/scannow and boot into safe mode. (Vista Home Premium)
Hi all
Please bear with me here that I try to explain all the questions I have with my computer right now. I'll try to explain everything that self-organization as possible, but if you need more information or file papers to provide a solution more precise, do it me know.
To start, I use a HP Pavilion dv6000 series (dv6748us to be exact) with Windows Vista Home Premium (32 bit) installed. (Service pack 2). About 6 months ago I got this laptop from what I believe was the conflicker virus (kept forwarding pages, arrested updates and antivirus programs, etc.) and I managed to get Windows Update works again. My help and Support did not work well, it only worked in Mode without failure, so I did some research and tried a bunch of suggested corrections (update the registry, etc.) and got it work yet once again. I don't know if one of the tools that I used all by setting the Help & Support could have caused problems that I now (as I literally tried everything under the Sun until I got to work), but my Windows Update does not work properly again.
A few weeks ago, I installed some updates and restarted the computer, but updates did not finish install on reboot. He said the usual "Configuring Updates, do not turn off your computer", but never showed percentage complete or whatever it is. It restarted, and when I open Windows Update, he said the last time I checked the updates has never been (obviously not true), and when I tried to check the updates, it jumped right to the message telling me I have to restart my computer to complete the installation of updates. She continues to do everytime I open Windows Update. From time to time, I try to restart it, just to see if it will work, and he never does.
I spent hours trying all the solutions I could find in Google. I tried to run system update readiness tool, which seemed to run correctly (but does not solve the problem). I then tried the difficulty it for Windows Update, and it does not solve the problem. (It might be important for me to mention that I also have problems with the difficulty It Center itself, too. Individual tools like that for Windows Update is running, but the difficulty It Center program keeps giving me the error message that "a problem is preventing the troubleshooting tool to start.") I also tried to rename the pending.xml file, and then later I deleted it, after reading in another forum that you rename the file could cause system instabillity or something like that.
Unfortunately, I can't use system restore to solve all my problems, because all my previous restore points have disappeared (I don't know if the virus wiped out them, or if the computer removed on its own) but restore points only I checked are those that have been created recently, during the time I had these problems.
I tried running sfc/scannow nothing helped, as he continues to tell me that there is a pending repair, but repair pending never ends. I tried to use the command of /revertpendingactions of dism.exe/image:C\/cleanup-image in the command prompt of recovery center to stop it pending repairs, and that has not worked because it claims that dism.exe that does not exist / is not a valid command. No matter what I try, I can't have this pending repair or my updates to complete pending.
I tried to boot mode safe several times as well and he hung up on crcdisk.sys when starting every time.
Being that I can't use sfc/scannow, System Restore, or get into Safe Mode, I'm really lost as to what I should do next. I'm honestly not sure if the problems are related, but I just thought it would make sense to list them all in one place.
Please note that I don't want to re - install Windows Vista, or don't I think I need, because the computer works very well for most. (I use it for typing this right now). I had much rather bring all the features on mine, which I believe can be achieved with the help of the right person.
If someone could provide me with suggestions/solutions, it would be greatly appreciated! Certainly, it would relieve a lot of stress for me!
DISM is a thing of Windows 7. First test the hardware.
Standard hardware troubleshootingFirst to test we can the material. Material defects can appear as many software defects, that's why we need to test the material first...Follow these steps in order. Defects of memory can cause disk corruption, disk failures can cause corruption of the disk. Damaged disc causes corrupted files (which SFC may be able to fix). If you get a stop error and after return. Do not run chkdsk with faulty memory.
Diagnosis of memoryIf you have not run a diagnosis of memory, please do. Click on Start - Control Panel - choose Classic view in the left pane - choose Administrative Tools - then memory diagnostic tool.S.M.A.R.TStart - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).Disk in Windows drives monitor for impending failure. The function is called S.M.A.R.T. It detects an imminent failure, 30% of the time. In a type elevated command prompt (it's a single line)WMIC PATH MSStorageDriver_FailurePredictStatus /namespace:\\root\wmi get active, predictfailure, reason ListIf it is on will be true, otherwise on enable in the BIOS of the computer.Predict the failure must be False if everything is ok.In Vista and later if SMART failure predicted Windows prompts the user to run the backup.Run chkdskIn computer all your drives right click and choose Properties, then the Tools tab, and then click check now. Check the TWO boxes and then start. Reset. This will take from one day to the next.SFCCheck the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).sfc/scannowHeatHeat can lead to problems of this kind, and sudden restarts without crashing. Make sure that your fans are not clogged with dust.For memory diagnostic resultsClick on Start - Control Panel (and select Classic view in the left pane), select Administrative Tools and then Event Viewer , and then look in the event (Local) - Applications and Services - Microsoft - Windows - MemoryDiagnostic-results Viewer entered.Look for EventID is 1201 or 1101 and Source is MemoryDiagnostic-resultsDouble-click the entry for more details on this entry.For results of Chkdsk
Click on Start - Control Panel (and select Classic view in the left pane) choose Administrative Tools and then Event Viewer , and then look at the Application and the System will connect (under Windows logs) for entries.Look for EventID is 7 and Source disk
Look for EventID is 11 and the Source disk
Look for EventID is 50 , and the Source is disk
Look for EventID is 51 and Source disk
Look for EventID is 52 and Source disk
Look for EventID 55 and Source is NTFS
Look for EventID is 130 and Source is NTFS
Look for EventID is 134 and Source is NTFS
Look for EventID is 137 and Source is NTFS
Look for EventID 1001 and Source is Autochk
Look for EventID 1001 and Source is Winlogon
Look for EventID 1001 and Source is WinInit
Look for EventID 1001 and Source is Chkdsk
Look for EventID is 26212 and Source is ChkdskLook for EventID 26213 and Source is Chkdsk
Look for EventID 26214 and Source is ChkdskDouble-click the entry for more details on this entry.PS 7 and 55 are auto repair codes where windows repair disk errors silently on the fly. 52 is the SMART warning.For the results of the SFCStart - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "It will be able to see which files are corrupted.To see if therefindstr/c: "[SR] repair" %windir%\logs\cbs\cbs.log|moreThere are often false positives for small text files that Windows uses like settings.ini and desktop.ini. Ignore these. -
Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is agitated and it is not difficult to work with him because I like and what I should I do?))
Serial number C02FD2CPDF8V
-
MacBook Pro 13 "is the gel and the trackpad
Hello
I have a problem with my new Macbook Pro 13 ", sometimes, the screen completely freezes and I can't move the arrow. The trackpad freeze too and I can't push on it, it's like it was lock. I can't do nothing except restart my macbook by holding the power button.
I'm still on the store guarantee two weeks where I bought it. But this problem happened before, I bought a macbook a month ago, I had this problem as they went the macbook to another, but I have a problem with a new. That's happened? Is this normal? I can solve this problem?
Thank you
- Note the time of the next involuntary reboot. After the reboot, open the Console app in Finder > Applications > utilities and look for entries of the log at the time of reset. Suspicious message here.
Search before the journal entry that begins with BOOT_TIME since it is the first line of a startup
-
I have problems with my view i camera on my Mac Book Pro. Suddenly the video camera does not work (no green light on) FT or Photo Booth. The screen is black, if I restart it, it works but after closing the lid it stops and I have to restart the computer. I use V10.11.3. An idea about what is happening
Hello mpm068,
Thank you for using communities of Apple Support.
Since your iSight webcam works up to the time that your Mac goes to sleep, I would like you to start please help desk trying to replicate this problem then to reboot in safe mode:
Choose the Apple menu > shut down.
After your Mac stops, wait 10 seconds, then press the power button.
As soon as you hear the startup tone, hold down the SHIFT key.
You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.
Release the SHIFT key when you see the gray Apple logo and progress indicator.
To exit safe mode, restart your Mac, but no press during the startup.
OS X El Capitan: start in safe mode
Take care.
Maybe you are looking for
-
How can I get an upgrade for my Satellite 4010CDT?
How can I get an upgrade for my laptop S4010CDT / 4.0 NL TOSHIBA?
-
Can I copy and paste on the document I formula with a note?
Can I copy and paste on the document I formula with a note?
-
I installed El Capitan. Now the e-mail program crashes. Suggestions?
I installed El Capitan. Now the e-mail program crashes. Suggestions?
-
Keep them from flashing "setting current auto" and not shut down completely... stay in power saving mode. What should I do? * original title - Dungeon of flashing "auto adjust in progress" help *.
-
Well, I have this camera called the sharper image. Its a digital camcorder combo. Problem is, I record videos, but it will not play on windows media player. I can hear the sound but can't see the video. Pictures work fine however. C:\Documents and