MacBook Pro screen brands

Similar Questions

• How to keep the Macbook pro screen and cin on position?

  How to keep the Macbook pro screen and computer in position 'on '.  I don't want the computer shuts down or cut unless I ask him to...

  If you talk to keep your machine to fall asleep, take a look at the caffeine.

• Melted white MacBook Pro screen

  Hello

  I'm having a problem with my MacBook Pro Retina 2015, the screen freezes and fades to white! IV ' e only had it since December 2015! has anyone seen this problem before? If I have him take it back to Apple they will repair it or offer me a new?

  If you make an appointment at the genius bar, they will try to solve this problem, if possible.  What this at startup or after it starts on the desktop? Things you can do. Reset the PRAM.  https://support.Apple.com/kb/ph18761?locale=en_US reset SMC.  https://support.Apple.com/en-us/HT201295 go to the recovery (command + R to start) and reinstall the operating system. You should not loose and personal files that it installs only the OS. If you still experience the problem, the brand and the appointment a genius bar.  Must make a backup of the drive using time machine, if you can, before go you to apple. Just in case they erase the disc.

• MacBook pro screen does not light

  Hi, I have a macbook pro 13 inch edition at the beginning of 2015. A few days when I tried to turn on my computer, screen not turn on including the lamp to the rear logo. but I heard the startup sound with the keyboard backlight on. I plugged the computer to an external monitor, then I saw in this computer monitor works fine. I tried to make configurations LANDAU and SMC. screen still does not work. but sometimes laptop screen lights up, then when I restart the computer, the screen will come up again. help me guys what should I do? Thank you

  If you're lucky, the connection to the screen is not correctly connected or must be replaced.  If you are unlucky, the display needs to be replaced.  Make an appointment at an Apple store genius bar for a FREE evaluation.

  Ciao.

• MacBook pro screen flashing external display connection

  Whenever I connect a display remotely on DVI (tried both Apple DVI-> Adapter Mini DisplayPort customized DVI-> HDMI adapter), my Macbook pro display blinks for a long time, like 1-2 minutes before you succeed. This does not happen with VGA (I tried Apple VGA-> Mini DisplayPort adapter). He is shown here:

  https://www.YouTube.com/watch?v=dLmI82DDvXw

  It's annoying as *. For example: whenever I visit the coffee machine or the bathroom, I have to wait 1-2 minutes until I can get back to work, because the screen was turned off until I can come back. And don't suggest me to extend the period of closure, which is not a viable solution. It happens every morning so when I get to work and turn on the computer.

  Any help would be greatly appreciated!

  See you soon

  Hi ColonelKermit,

  I understand that you have a problem with your screen when attaching it to an external monitor. You can try to fix it by resetting your NVRAM memory on your computer, which is explained in the following article:

  How to reset the NVRAM on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204063

  You can also start your computer Safe Mode, which can help to influence the situation:

  Try safe mode if your Mac does not end commissioning - Apple Support

  https://support.Apple.com/en-us/HT201262

  Thanks for being a part of the communities of Apple Support!

• Sort the macbook pro screen problems?

  MacBook Pro 15 inch end 2011, 2.2 GHz Intel Core i7, 4 GB 1333 MHz DDR3, AMD Radeon HD 6750 M 512 MB.

  El Capitan 10.11.3 OSX

  So a week ago, I got my board logik replaced under the scheme where Apple do for free and when I got back that I updated the OS to El Capitan, and since then, my macbook was restart itself after the screen messes up, as there lines horizontally will go across the screen, the screen turns blue with vertical lines or he'll usually scrambled and the right part of the screen is on the left and the left side is on the right. This happens usually when I watch shows online, I bought a new external hard drive yesterday to replace my old and I did a full backup time machine, which took about 6 hours, I left alone and did not touch my MacBook all the time so he was backing only, and so it didn't plant once then when I look at something online it could crash a couple of times in an hour. It happens on safari and chrome.
  Guidance on how I can resolve this issue? I plan to do a clean install of El Capitan, I know that it is usually a last resort, I already have the stick bootable installation, I was wondering if anyone had any idea what to do?
  Thank you very much

  Bring the MBP and checked it.  It is indicative of hardware problems, not software.

  Ciao.

• MacBook pro screen turns off randomly?

  My 15 inch Macbook Pro 13 (obtained in new end 14 h & B, started using it at the beginning of the 15) has a screen which turns off at random (dim backlight is - I can see a slight difference when I actually turn off the laptop), in addition to the programs (audio abruptly stops, etc.). The computer is still on 'on' (Hum, backlight on) and it will overheat after a bit. I have to hold the power to restart. Resolutions of potential problems?

  Other things-

  1. It happens in bursts, which happens once and if I do the reboot thing and continue to use it, it will probably happen again in about 10 minutes, and if I continue to do, at some point it will extinguish almost immediately after I connect (but never before!...)
  2. Looks like CPU-consuming tasks cause this happens more frequently: However, I've never had it happen once during a vidchat on Skype or Hangouts, so I don't know? iTunes, it is more likely to occur while
  3. Seems to happen more often on the recharge of battery/no lower, but has recently been happening sometimes at 100%/plugged in.
  4. It is probably the material - I 10.9 update (question began, then like 2 months ago) to 10.11 and issue continue to occur.
  5. I suspected the battery, so I went to the Apple Store and the initial diagnosis found nothing at the edge of any
  6. He has been doing worse and worse - more frequently and (as mentioned) to high battery %s. Now I can almost guarantee an ooccurrence once every 3-4 hours of use.
  7. No, turning and the new does not help.

  Any help would be appreciated! Thank you: c

  Reset the PRAM.  http://support.Apple.com/kb/PH18761

  Reset the SMC. Choose the method for "on Mac Laptops with non-removable battery.

  https://support.Apple.com/en-us/HT201295

• MacBook Pro screen automatically fades everything I do

  I use a 12 inch end 2012 MacBook Pro, running OS X 10.11.1

  My screen keeps dimming after a minute or two despite not controlled "automatically adjusts brightness" under the preferences panel to display and unchecked all the settings on the tabs of the battery and the power adapter in the energy saver preferences. This happens if I use the computer (actively entry) or if I'm on battery or AC adapter. 2 I even moved my computer sleep well view forward and to "Never", just to test the problem, in which case the dimming was linked to the "dim before sleep" option that is no longer available. I also tried to install the software of caffeine that is supposed to prevent the screen from dimming. Even caffeine does not work. Work on my macbook is requires constant adjustment to the top of the brightness of the screen with the f2 key. It works for awhile, then it fades again! Also has anyone seen this problem? He drives me crazy. Would appreciate a lot of suggestions. I read all the previous threads on this and it is not a system of preferences screen or saving energy in question.

  If you have not already tried resetting SMC, try it.

  Reset the SMC.    Choose the method for "on Mac Laptops with non-removable battery.

  https://support.Apple.com/en-us/HT201295

• My MacBook Pro screen is deformed, then restarts

  After that 30 seconds, the screen become distorted my Mac automatically restarts. He comes to the Apple with the loading bar but then once more the screen begins to play up. Join pictures of what looks like on the screen. Sometimes it allows me to connect, but still the screen plays up. Can someone help me?

  It's even worse than the photo shows - just couldn't upload the 2nd photo from my phone for some reason any

  What MBP model please?

  To identify your own read How to identify MacBook Pro - Apple Support patterns

• connect the 20 inch from 2002 to 2012 macbook pro screen

  How can I connect my apple cinema 20 inch display to 2002-3 of my 2012 model 13.3 "MacBook Pro?

  You need an adapter Mini DisplayPort to DVI (it plugs into a Thunderbolt on Mac port)

  http://www.Apple.com/shop/product/MB570LL/B/mini-DisplayPort-to-DVI-adapter

  If the display uses ADC (Apple display Connector)

  https://upload.wikimedia.org/Wikipedia/Commons/thumb/0/09/AppleDisplayConnector. jpg/220px - AppleDisplayConnector.jpg

  you will also need an adapter DVI to DVI

  http://www.Amazon.com/Apple-DVI-ADC-display-adapter/DP/B00011KHT2

• MacBook Pro screen turned white rose areas

  I use a Macbook 2009 end Pro 15 ", 4 GB of ram, 2.8 GHz Intel Core 2 Duo. Everything is fully updated. Yesterday, I started getting intermittent flashes of rose on the white areas of the screen. Affected programs were Pages (old and new versions), Safari, Mail, numbers and Quickverse. I have tried a reboot and everything seemed fine, but he reappeared briefly to the waking from sleep.

  Today the same programmes on each screen, including white ares of my desktop image. I can read the material, but it's distracting. The best way I can describe the pink areas are thin vertical lines as fabric. The area directly below the words is mainly white.

  I searched the forums and tried to reset the Pram and go through all the steps for the MSC. I started using the safe, but the rose remained. I ran the disc with no found error utilities. I tried to run the apple hardware test, but nothing happened. [The instructions said close then turn on by holding down the button D. I tried 3 times, but the icon never appeared].

  I also tried 8 Tech tool for video and nothing was found.

  The Apple store nearest is 3 hours away if I'd rather solve this problem without going there.

  The Apple store nearest is 3 hours away if I'd rather solve this problem without going there.

  You did all the good troubleshooting-

  You have a hardware problem.

  GPU, cable, cable connection, LCD or LED

  In or out of warranty you can get for free a 'Apple Service Diagnostics' OTC test and ask specifically for the VST (video systems Test)

  Genius of booking http://www.apple.com/retail/geniusbar/

  Online https://getsupport.apple.com/GetproductgroupList.action

  check the warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

• MacBook Pro screen WHITE white

  Hello

  My Mac Book Pro does not, restart after several restart and safe mode. Apple logo, green line bar proceeds at the end and screen turns WHITE.

  Need help - please.

  Thank you.

  Mac OS X - grey appears during startup

  Address start up your Mac to a gray screen. MacIssues

  Question (?) Mark, record of flashing or a gray screen at startup

  It's related, but not identical questions. Their causes are described in based on Intel Mac-Startup sequence and error codes, symbols. Solutions will be found in:

  A globe or a flashing question mark appears when you start your Mac

  Mac OS X - grey appears during startup

  In most cases problems can be caused by one or more of these:

  a. problem with the computer's PRAM - see reset the PRAM and NVRAM on your Mac.

  b. boot, directory of the drive has been corrupted - repair with disk utility.

  c. critical system files are corrupted or deleted - reinstall OS X.

  d. the hard drive is physically non-functional - replace the hard drive.

  Please note that the information I have provided is what Apple recommends, if other users will suggest different solutions found here, then be sure to what they recommend has no impact on your ability to get the Apple continuous service guarantee, if any.

  Please do not start remove disks or change cables unless you know what you're doing and have exhausted other alternatives non-invasive described here. If you perform all knit yourself which is not approved by Apple, then you will void any warranty you can have and lose any other Apple support.

  Fix the hard disk and permissions

  Boot from your Snow Leopard installation disc. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  If THE reports errors, it cannot be resolved, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you do not have one of them or none of them can fix the disc, then you will need to reformat the hard drive and reinstall the OS X.

  The main difference if you use Lion or Mountain Lion, you must first boot from the boot Recovery HD simply HD recovery to perform the foregoing.

  Reinstall Snow Leopard without erasing the drive

  1 fix the hard disk and permissions

  Boot from your Snow Leopard installation disc. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  If THE reports errors, it cannot be resolved, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you do not have one of them or none of them can fix the disc, then you will need to reformat the hard drive and reinstall the OS X.

  2 reinstall Snow Leopard

  If the disc is OK then leave FROM and return to the installer.  Proceed to reinstall OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a new copy of Mac OS X, the installer will move your Home folder, third-party applications, elements of support and network preferences in the newly installed system.

  Download and install Mac OS X 10.6.8 v1.1 updated Combo.

  Relocation of Lion/Mountain Lion without erasing the drive

  HD recovery start: , restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select the Recovery HD and click on the arrow pointing down.

  Repair the hard drive and permissions: at startup, select in the main menu disk utility. Repair hard disk and permissions as follows.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu.

  Reinstall/Mountain Lion Lion: Select reinstall/Mountain Lion Lion and click on the button continue.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than wireless.

• Cannot use the MacBook Pro screen correctly in the unit

  I have been using Fusion for a few weeks and very happy with it.

  I've just developed a strange problem. I have a Setup dual monitor which was working fine but I can persuade is no longer Windows software to use the second screen (using a dredge or by revealing to show Powerpoint slide shows on the second screen) and I can't the software windows can only use about 3/4 of the MacBook screen. My Mac software works correctly on both screens. Windows Control Panel is pleased that there is two screens configured correctly.

  Any ideas as to what I could have done?

  I have attached a screenshot showing my primary screen screen problem.

  Thank you very much

  It seems that the tools do not work correctly. Access the one-stop unique mode, uninstall tools, restart Windows as needed and install the tools.

• MacBook Pro screen displays a blue screen with the vertical line

  Hi, I have a problem with my macbookpro. When I try to start, the gray screen load with the apple logo and then turn to blue screen with vertical crosshairs.

  It would be useful that you mentioned EXACT model/year of your MBP and the current OSX.

  Ciao.

• MacBook Pro screen turns blue!

  How can I solve this problem?

  If you connect an external monitor and the mirrored display, which is display on the screen?

  This happens to you all the time?