MacBook pro starts the process but stop before midway lights

HI -.

My MacBook Pro starts the boot process but stops and stops before reaching the point to halfway. This can be the result of something that I did yesterday, I disabled my MacBook during a software update. I don't know what has been updated.  (I've left for a few hours and would not leave my computer on while I was out.)

Is there something at home, I can do to fix this?

Thank you!

If you do not know what has been updated, nor do we. Could have been a critical system component. Try to start in Safe Mode and see if that clears up the problem. If this is not the case, start in Recovery Mode, select disk utility and make a disk first aid. If that doesn't work or you can't get into Recovery Mode, then try Internet Recovery Mode, while the Mac is connected to the Internet (press Command + Option + R) so it starts off Apple servers and reinstall OS X. If all goes well, you won't lose too much data.

Tags: Notebooks

Similar Questions

  • XI (11.0.09) drive sometimes starts the process but does not appear in applications or open on desktop

    On windows 7 64 bit. Sometimes reader XI (11.0.09) begins the process but does not appear in the applications. In this case however the application is started for example start menu, double-click on pdf, double-click AcroRd32.exe. He

    11.0.09 is put on hold for us - supported by 11.0.08 solves the problem

  • XP starts the sequence but stops at a black screen before the end of startup.

    When I start my PC's of tracks through the boot sequence but evaporate hangs on a white, black screen. Then I plant sequence and re-boot into Safe Mode. I tried to restore to a previous point, but have always had the same problem. The company I bought the PC from was wound up some time ago and I don't have a recovery disk. I can only work in safe mode and cannot access the net, emails or anything other than the basics. Any ideas gratefully received.

    Hello

    As you can connect to the computer in safe mode, I suggest you perform a clean boot to verify if a third party startup application or service prevents the computer
    to boot the system.

    Refer to this article for more information about how to perform a clean boot:

    How do advanced clean boot troubleshooting in Windows XP:
    http://support.Microsoft.com/kb/316434

    Also see this article:

    Advanced Troubleshooting for General startup problems in Windows XP:
    http://support.Microsoft.com/kb/308041

    Kind regards
    Afzal Taher-Microsoft Support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • My email is unable compact my mails, it starts the process and then stops.

    My email is unable compact my mails, it starts the process and stops, any help

    Try to manually compact with my Windows Mail utility (www.oehelp.com/WMUtil/) and see if it works.  Also check interference antivirus (see www.oehelp.com/OETips.aspx#3).

    Steve

  • MacBook pro stolen the question, 'Find my mac' still works to erase personal information if I put it before changing the icloud/itunes account password?  or is my phone app stop working when I change the password?

    MacBook pro stolen the question, 'Find my mac' app still works to erase personal information if I put it before changing the icloud/itunes account password?  or is my mac app stop working when I change the password?

    Unless you fully active 'find my Mac' BEFORE that your mac has been stolen, it can't do anything for you now. It is not active, and there is no way to make it active after the fact.

  • How can I get my menu bar on my macbook pro? The dock also disappeared. I know I have to take my pointer upwards (or downwards), but it's a waste of time and that bothers me. Its only happens on Safari, and not on other applications.

    How can I get my menu bar on my macbook pro? The dock also disappeared. I know I have to take my pointer upwards (or downwards), but it's a waste of time and that bothers me. Its only happens on Safari, and not on other applications.

    You could try starting in safe mode:

    • Try safe mode if your Mac does not end commissioning - Apple Support

    Which can allow additional troubleshooting.

    Also, sometimes there may be a hardware problem which may help a SMC reset with

    Depending on the cause:

    • Reset the management system (SCM) controller on your Mac - Apple Support

    You can try the test equipment to see what appears in the results:

    • With the help of Apple Hardware Test - Apple Support

    Other options include an appointment with a genius of Apple Store or a

    service provider authorized Apple for the device inspected, diagnostic tests, etc.

    There may be system software or hardware problems, in order to solve the problems with the aim

    to see what the cause, can take time. If you have a backup in Time Machine &

    end by using OS X Recovery to see OS X Utilities usage, disk utility or

    other functions, be aware that this can make the more advanced features; It may not need.

    Because this question appears as a symptom in Safari, which makes it more curious.

    • Stop the pop-up ads and advertising on Safari - Apple Support

    http://etrecheck.com/ http://www.adwaremedic.com/index.php   

    There may be a weird extension in Safari that may relate to some adware or other

    elements, so this is another issue to consider. a report of Etrecheck may tell you if

    some candidates are there; but maybe not. I do not primarily use Safari

    so, my other two browsers work slightly differently.

    Good luck & happy computing!

  • Vista System Restore does not work. I disable Norton Antivirus before you start the process. What can I do else?

    Vista System Restore does not work. I disable Norton Antivirus before you start the process. What can I do else?

    1. try SR in safe mode:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    2 Malware will stop at the system restore:

    If necessary, do all the work Safe Mode with network.

     

    To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

    http://www.Malwarebytes.org/MBAM.php

    Malwarebytes is as its name suggests, a Malware Remover!

    Download the free Version from the link above.

    Download, install, upgrade and scan once a fortnight.

    See you soon.

    Mick Murphy - Microsoft partner

  • I am trying to install Windows XP and during the process, a message appears with the title "RUNDLL__Error in iesetup.dll Missing entry: IEAccessSysInst. The process then stops and I cannot make progress.

    I am trying to install Windows XP and during the process, a message appears with the title 'RUNDLL '.
    "Error in iesetup.dll Missing entry: IEAccessSysInst.  The process then stops and I cannot make progress.

    Do not install an operating system is usually caused by (in order of probability):

    1. you are trying to install with other devices connected to the computer. Unplug them before trying to make an installation.

    2. "" "" defective installation media. "" Check the CD/DVD installation for scratches, tasks. Try another machine.

    3. bad optical drive. Test with another CD/DVD bootable or Exchange for a well-known work.

    4. faulty RAM. Test with Memtest86 + www.memtest.org . You will download the .iso image file to create a bootable cd. Burn the file with the third party burning software *-as an image, not in the form of data. Then start with the media that you did (you may need to change the boot priority in your BIOS so that the optical drive is the first boot device). The test runs immediately. The test run for an hour or two--at least that errors are seen immediately. If you get any errors, replace the RAM.

    * It is not necessary to have a third party burning software in Windows 7 since Win7 natively allows to burn an .iso. Other operating systems require it. A good free choice ImgBurn comes from www.imgburn.com .

    5. bad hard drive. Test with a diagnostic utility downloaded from site of the disc mftr... You create a bootable CD with the files you download. Burn the file with the third party burning software *-as an image, not in the form of data. Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it.

    * It is not necessary to have a third party burning software in Windows 7 since Win7 natively allows to burn an .iso. Other operating systems require it. A good free choice ImgBurn comes from www.imgburn.com .

    6. other hardware components are faulty. MS - MVP - Elephant Boy computers - don't panic!

  • Sound is gone on my Macbook Pro. The icon is grey after trying to download a password security app Help!

    Sound is gone on my Macbook Pro. The sound icon went gray. This followed two downloads of password security applications and then deleted. The third I have kept and entered my password. If I go into the Time Machine to restore the system will delete the security of password I put in place after the last Time Machine backup?

    Thank you for your willingness to get out me of trouble!

    Hi Vincent,.

    I understand that you are no longer able to control the audio output on your Mac after installing a few different security applications. If you want to use Time Machine to back up or restore your Mac at one point before installing these applications, it is absolutely an option. However, keep in mind that this kind would remove, indeed, any changes made after the point of this backup, including installation and configuration of said software.

    Alternatively, you can consider having a look at the article in the link below for steps that can help to restore the functionality of audio output on your MacBook Pro.
    Troubleshooting for any audio speakers on Macs

    https://support.Apple.com/en-us/HT203186

    Sincerely.

  • The Sierra of MacOS will propose for the Mid 2009 MacBook Pro in the near future?

    I have a model Mid 2009 MacBook Pro and when I try to upgrade the software of OS systems to the Sierra, he refused my request to download because it "cannot be downloaded to this computer." I noticed other Mac computers, for example, iMac Mid 2009 or newer and MacBook Mid 2009 or more recent systems only one are close to mine are candidates to download the software, but the MacBook Pro is the only one that is not on this list for availability. So, my question to my question is, will be available Mid 2009 MacBook Pro updated to day for Sierra anytime soon? And if not, why?

    Please let me know what your answer is as soon as possible.

    Thank you!

    My answer is no.

    However, as long as I and everyone here, do not work for Apple, my answer is certainly not authoritative.

    However, as I've used Apple computers for more than 30 years, he never had a case when they released an additional OS that works on previously excluded material.

  • Why won't my Macbook Pro start in recovery mode even when I press Cmd and R

    Why don't my Macbook Pro starts in mode of recovery even when I restart and press Cmd and R or also I tried Cmd Alt and R

    Is the EXACT year/model of your MBP a mid-2009 as the current OSX?

    Depending on the circumstances, you may need to use the drives original installation to help you MBP rerun.

    Ciao.

  • Can I connect a new MacBook Pro to my old but beautiful G5 screen?

    Can I connect a new MacBook Pro to my old but beautiful G5 screen?

    I guess you can connect but it won't show anything of your MBP.

    Here are the criteria of target Display Mode:

    https://support.Apple.com/en-us/HT204592

    Ciao.

  • When I install xp sp3, the process is stopped and do nothing more

    Dear Guys,

    When I update windows xp service Pack 3, the process is stopped.

    the detail information show "own performing" then nothing, please help me.

    Thank you

    Steps to take before you install Windows XP Service Pack 3
    http://support.Microsoft.com/kb/950717

    How to troubleshoot an installation fails on Windows XP Service Pack 3
    http://support.Microsoft.com/kb/950718

    http://taurarian.MVPs.org/WU_XP/windowsxp_service_pack_3.html

    TaurArian [MVP] 2005-2010 - Update Services

  • CS5 Design Premium and recently bought a MacBook Pro with the retina display

    I have CS5 Design Premium and recently bought a MacBook Pro with the retina display. everything seems pixelated. Question: if I buy a large external screen for use with the product Adobe will always look pixelated?

    I can't answer that question, but I can say that CS5 is is no longer being updated for the new hardware and operating systems, so as far as I know, if you buy an external with the same kind of screen 'High definition' monitor you have now, you will have the same problem

  • You try to start the process manager in a new installation

    Version 11.2.1.0.3
    Platform: RHEL 5.4

    To configure the Manager process in a machine (which will be a target server), I downloaded GG delivery Setup.
    The installable unpacked to the desired location. Then I created a basis for the manager parameter file and tried to start the process manager. But the process manager is not coming.

    That's what I've done so now after installing GG (by installation, I hear the shearing and Untarring)

    1 set the env for the database variables

    2. created settings for the Manager as shown below.
    $ ./ggsci
    
    Oracle GoldenGate Command Interpreter for Oracle
    Version 11.2.1.0.3 14400833 OGGCORE_11.2.1.0.3_PLATFORMS_120823.1258_FBO
    Linux, x64, 64bit (optimized), Oracle 11g on Aug 23 2012 20:20:21
    
    Copyright (C) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
    
    
    
    GGSCI (stryker179) 1> info mgr
    
    Manager is DOWN!
    
    GGSCI (stryker179) 4> view param mgr
    
    port 7809
    purgeoldextracts /u04/ggData/dirdat/MS/*, usecheckpoints
    dynamicportlist 7840-7849
    
    
    GGSCI (stryker179) 2> start mgr
    
    Manager started.
    
    
    GGSCI (stryker179) 3> info mgr
    
    Manager is DOWN!
    I have not created any gguser at the DB level. But this is not a sine qua non for process manager. Right?


    -Regarding the logging of errors of GG

    Wish I could check some logs to see what is causing this problem?

    Where are the logs (.rpt files) stored? I believe that we must manually create a directory called dirrpt.
    The new facility, the dirrpt directory was created for, not. Only the following directories were found after the installation (détarer)
    $ ls -alrdFt * | grep /
    drwxr-x--- 7 oracle oinstall      4096 Aug 24 07:06 UserExitExamples/
    drwxr-x--- 2 oracle oinstall      4096 Aug 24 07:33 cfg/
    drwxr-x--- 2 oracle oinstall      4096 Aug 24 07:33 dirprm/
    drwxr-x--- 2 oracle oinstall      4096 Aug 24 07:33 dirjar/

    Hello

    1. do you run CREATE subfolders in GGSCI prompt?

    It will create all the folders required such as dirprm, dirrpt, dirdef, dirsql, dirdat... etc.

    DB user level is not necessary for the process of the Boot Manager, but you must create the Bishop under the dirprm folder settings file, to do this you need to run,

    GGSCI > EDIT PARAMS MGR

    in this reference to file the PORT number, it will be generally 7809 ex, PORT 7809,

    Then start the mgr in GGSCI

    GGSCI > MGR START

    Yet once if you get the MESSAGE MANAGER, view the details in the ggserr.log file that is available in the GG base directory where you unpacked the binary files.

    I hope this will help you
    Annamalai.

Maybe you are looking for