MacBook Pro, watch or stop?

Similar Questions

• MacBook Pro does not stop.

  My MacBook Pro will be stop or restart.

  Hello, Steve840!

  Thank you for joining the communities Support from Apple! Looks like you have a problem closing the Mac. I know how it is important to be able to stop and restart the computer as well. Here are a few troubleshooting steps that you can try. Go through each of them at a time and see what step fixes the problem:

  • Try to determine if a particular application is the source of the problem. If an application always crashes when you stop and cancels the process then update or remove and reinstall the application. There could be a message that is displayed by saying that an app has cancelled the restart or shutdown. Read this article toForce an app to close on your Mac.
  • Perform a software update (open the App Store, then click on updates > update all).
  • Update any software that you have installed outside of the App Store. In general, open the app and choose Help > update > update software.
  • Make sure you have FileVault disabled (System Preferences > Privacy & Security > FileVault > turn off FileVault).
  • Open disk utility. Choose the main hard drive and click on check the disc. If there is no problem, click Repair disk.
  • Follow these steps to reset the management system (SCM) controller on your Mac. This removes the startup items and conduct audits to see if something in the background can cause the problem. Don't forget that you can always press and hold the power button on the MacBook, until it stops to completely power off to restart.
  • Follow these steps on How to reset the NVRAM on your Mac.

  See you soon!

• MacBook pro retina start/stop

  After installing OS X 10.11.6 my macbook pro retina spontaneously restarts or stop.

  Any ideas?

  Thank you

  m

  Mine breaks down several times in mobile mode.   However it never crashes when I use the HDMI port connected to a monitor

• MacBook Pro will not stop manually, must force closure every time

  My Macbook Pro (bought in 2013) does not stop. It remains just to the screen with all the folders and the bar of the upper screen went. Bottom Dock remains. It shows that the Finder is still open but I can't leave the program, even when I try to force to leave. I had to force close to the bottom of my computer for a while now, because of this problem and I think that its starting to take its toll on the performance of the computers when it is started.

  What is Wacom software installed on your Mac? If so, upgrade to the latest version. If it does not help uninstalling the Wacom software, including possible elements of Wacom/Bamboo in System Preferences > users and groups > Login.

  http://www.Wacom.com/en-us/support/FAQs/drivers-software/how-do-i-uninstall-a-Dr iver-on-mac-os-x

  You can also reset the printing system can help:

  https://support.Apple.com/kb/PH18614?viewlocale=en_US & local = nl_nl

• Random stops of Macbook Pro with "cause stop:-128.

  My Macbook Pro 15 "mid-2014 A1398 will stop randomly.
  Console shows "cause stop:-128.
  I have zero SCM and NVRAM until reinstalled OS X.
  Apple Diagnostics showed no questions.

  A negative stop code may indicate a hardware problem. The precise meaning of the codes is not publicly documented.

  An appointment of 'Genius' to an Apple Store, or select another authorized service provider. You may need to leave the machine there for several days.

  Back up the data on the internal disks before you turn on your computer to anyone. There are ways to back up a computer that is not fully functional - ask if you need advice.

  If privacy is a concern, delete the partitions of data with the ability to write zeros * (do it only if you have at least two backups complete, independent, and you know how to restore on a blank disc from any one of them.) Do not delete the recovery partition, if it is present.

  Keep your data confidential and secure during the repair of the equipment.

  Apple recommends that you remove permission to a device in the iTunes store before serving.

  * One SSD has no need to be set to zero.

• The CTRL key on my macbook pro has suddenly stopped working, but only for

  Hello

  I have a Macbook Pro with Yosemite, and suddenly today the ctrl key stopped working but only when it comes to special characters, not to do a right click. I have accidentally set something off the coast, or what happened? I write a lot in Swedish on this computer (that I bought in the USA where I live too), I need these special characters, so is there an easy way to solve this problem?

  See you soon,.

  Leo

  Special characters would be the key to the default

• Etrecheck shimming macbook pro / can't stop

  Here is a copy of my report to etrecheck.  MacBook Pro info in the report. Have you tried a second Etrecheck and he's basically freezing my computer where I have to stop and restart manually. Thanks for any help.

  EtreCheck version: 2.6.4 (224)

  Report generated on 27/11/15, 01:57

  Duration 02:55

  Download EtreCheck from http://etresoft.com/etrecheck

  Click on the links [click for support] to help with non-Apple products.

  Click on the links [click for more details] for more information on this line.

  Hardware Information: (Does that mean?)

  MacBook Pro (13-inch, mid-2012)

  [Click for plug technique]

  [Click here for the User Guide]

  MacBook Pro - model: MacBookPro9, 2

  1 2.5 GHz Intel Core i5 CPU: 2 strands

  4 GB of RAM expandable

  [Click here for upgrade instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 739 - SN = W02284XG6D3LC

  Video information: (Does that mean?)

  Graphics Intel HD 4000

  Color LCD 1280 x 800

  Software: (Does that mean?)

  OS X El Capitan 10.11.1 (B 15, 42) - since startup time: less than an hour

  Disc information: (Does that mean?)

  HTS545050A7E362 disk HARD APPLE disk0: (500,11 GB) (rotation)

  EFI (disk0s1) : 210 MB

  HD (disk0s3) [recovery] recovery: 650 MB

  Macintosh HD (disk 1) /: 498,88 (Go 387,35 free)

  Storage of carrots: disk0s2 499.25 GB Online

  HL-DT-ST DVD - RW GS31N)

  USB information: (Does that mean?)

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Lightning information: (Does that mean?)

  Apple Inc. Thunderbolt_bus.

  Guardian: (Does that mean?)

  Mac App Store and identified developers

  Launch officers: (Does that mean?)

  [loading] com.adobe.AAM.Updater - 1.0.plist [click to support]

  Launch demons: (Does that mean?)

  [loading] com.adobe.fpsaud.plist [click to support]

  [operation] com.fitbit.galileod.plist [click to support]

  [loading] com.microsoft.office.licensing.helper.plist [click to support]

  User launch officers: (Does that mean?)

  [loading]   Fozhand.AppRemoval.plist [click to support]

  [loading]   Fozhand.download.plist [click to support]

  [loading]   Fozhand.ltvbit.plist [click to support]

  [performance]   Fozhand.Update.plist [click to support]

  [loading]   Manroling.Update.plist [click to support]

  [loading]   Otwexplain.download.plist [click to support]

  [loading]   Otwexplain.ltvbit.plist [click to support]

  [performance]   Otwexplain.Update.plist [click to support]

  [loading]   Perfetnight.AppRemoval.plist [click to support]

  [loading]   Perfetnight.download.plist [click to support]

  [loading]   Perfetnight.ltvbit.plist [click to support]

  [loading]   Perfetnight.Update.plist [click to support]

  [loading]   Portsayd.AppRemoval.plist [click to support]

  [loading]   Portsayd.download.plist [click to support]

  [loading]   Portsayd.ltvbit.plist [click to support]

  [performance]   Portsayd.Update.plist [click to support]

  [loading]   Swissfist.AppRemoval.plist [click to support]

  [loading]   Swissfist.download.plist [click to support]

  [loading]   Swissfist.ltvbit.plist [click to support]

  [loading]   Swissfist.Update.plist [click to support]

  [loading] com.adobe.AAM.Updater - 1.0.plist [click to support]

  [loading] com.adobe.ARM. [...]. plist [click for support]

  [operation] com.amazon.music.plist [click to support]

  [loading] com.citrixonline.GoToMeeting.G2MUpdate.plist [click to support]

  [loading] com.extensions.updater69337.agent.plist [click to support]

  [operation] com.spotify.webhelper.plist [click to support]

  Items in user login: (Does that mean?)

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Dropbox application (/ Applications/Dropbox.app)

  Canon IJ Network Scanner selector application hidden EX (/ Applications/Canon Utilities/IJ Network Scanner selector EX / Canon IJ Network Scanner selector EX.app)

  Hidden AdobeResourceSynchronizer Application (/ Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)

  The messages application (/ Applications/Messages.app)

  Fitbit connect Menubar Helper Application (/ Applications/Fitbit Connect.app/Contents/MacOS/Fitbit Connect Helper.app of the menu bar)

  Hidden Spotify Application (/ Applications/Spotify.app)

  Other applications: (Does that mean?)

  [operation] com.adobe.PDApp.AAMUpdatesNotifier.15392.1954061E-E630-4023-AC9B-3331CB5EAAFE

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000002.EtreCheck

  [ongoing] com.fitbit.GalileoMenubar.91552

  [ongoing] com.getdropbox.dropbox.48672

  [ongoing] com.HP.devicemonitor

  [ongoing] com.spotify.client.65312

  [ongoing] jp.co.canon.ij.CNSSelectorAgent.92192

  Plug-ins Internet: (Does that mean?)

  FlashPlayer - 10.6: Version: 19.0.0.245 - 10.6 SDK [click for support]

  QuickTime Plugin: Version: 7.7.3

  AdobePDFViewerNPAPI: Version: 11.0.13 - 10.6 SDK [click for support]

  AdobePDFViewer: Version: 11.0.13 - 10.6 SDK [click for support]

  Flash Player: Version: 19.0.0.245 - 10.6 SDK [click for support]

  EPPEX plugin: Version: 10.0 [click for support]

  Default browser: Version: 601 - SDK 10.11

  RL Secure Layer plugin: Version: Unknown - SDK 10.5 [click for support]

  SharePointBrowserPlugin: Version: 14.5.8 - 10.6 SDK [click for support]

  Silverlight: Version: 5.1.30514.0 - 10.6 SDK [click for support]

  iPhotoPhotocast: Version: 7.0

  User Plug-ins internet: (Does that mean?)

  CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [click to support]

  UploadManager: Version: Unknown - SDK 10.5 [click for support]

  ContentManager: Version: Unknown - SDK 10.5 [click for support]

  RocketEngine: Version: Unknown - SDK 10.5 [click for support]

  Safari extensions: (Does that mean?)

  HoverSee

  3rd party preference panes: (Does that mean?)

  Flash Player [click for support]

  Time Machine: (Does that mean?)

  Skip system files: No.

  Mobile backups: OFF

  Automatic backup: NON - automatic backup disabled

  Volumes to back up:

  Macintosh HD: Disc size: 498,88 GB disc used: 111,53 GB

  Destinations:

  Time Machine [Local] backups

  Total size: 499,76 GB

  Total number of backups: 15

  An older backup: 24/08/12, 11:41

  Last backup: 01/11/15 16:02

  Size of backup drive: adequate

  Backup size GB 499,76 > (disc 111,53 GB X 3)

  Top of page process CPU: (Does that mean?)

  40% mdworker (16)

  11% com.apple.iCloudHelper

  4% WindowServer

  3% kernel_task

  2% spotify Helper (2)

  Top of page process of memory: (Does that mean?)

  Kernel_task 559 MB

  270 MB mdworker (16)

  246 MB Spotify Helper (2)

  Com.apple.WebKit.WebContent 238 MB

  111 MB messages

  Virtual memory information: (Does that mean?)

  104 MB free RAM

  3.90 used GB RAM (993 MB cache)

  Used Swap 0 B

  Diagnostic information: (Does that mean?)

  27 November 2015, 01:34:11 /Library/Logs/DiagnosticReports/galileod_2015-11-27-013411_[redacted].crash

  27 November 2015, 01:19:53 /Library/Logs/DiagnosticReports/galileod_2015-11-27-011953_[redacted].crash

  27 November 2015, 01:08:24 Self test - passed

  26 November 2015, 01:34:26 /Library/Logs/DiagnosticReports/galileod_2015-11-26-013426_[redacted].crash

  26 November 2015, 01:15:21 /Library/Logs/DiagnosticReports/galileod_2015-11-26-011521_[redacted].crash

  November 25, 2015, 20:25:13 /Library/Logs/DiagnosticReports/galileod_2015-11-25-202513_[redacted].crash

  November 25, 2015, 19:50:37 /Library/Logs/DiagnosticReports/galileod_2015-11-25-195037_[redacted].crash

  November 25, 2015, 16:41:09 /Library/Logs/DiagnosticReports/galileod_2015-11-25-164109_[redacted].crash

  November 25, 2015, 14:05:35 /Library/Logs/DiagnosticReports/galileod_2015-11-25-140535_[redacted].crash

  November 25, 2015, 12:08:56 ~/Library/Logs/DiagnosticReports/AppAS_2015-11-25-120856_[redacted].crash

  November 25, 2015, 12:08:56 ~/Library/Logs/DiagnosticReports/AppRP_2015-11-25-120856_[redacted].crash

  November 25, 2015, 01:58:18 ~/Library/Logs/DiagnosticReports/AppRP_2015-11-25-015818_[redacted].crash

  November 25, 2015, 01:58:18 ~/Library/Logs/DiagnosticReports/AppAS_2015-11-25-015818_[redacted].crash

  November 24, 2015, 14:08:28 ~/Library/Logs/DiagnosticReports/AppRP_2015-11-24-140828_[redacted].crash

  November 24, 2015, 14:08:28 ~/Library/Logs/DiagnosticReports/AppAS_2015-11-24-140828_[redacted].crash

  November 24, 2015, 02:01:06 ~/Library/Logs/DiagnosticReports/Adobe Photoshop Elements Editor_2015-11-24-020106_ [redacted] .crash

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.7 ("Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

  2. If you have already a current backup backup all data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, so any person with the required competence can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site of thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  Another indication that the test is safe in this threadand this onecan be found, for example, where the comment in which I suggested it was recommended by one of the specialists of the communityApple, as explained here.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy a particular line of text to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin.") The title of the page is 'Diagnostic Test'. Under the title is a text box, headed by three small icons. The right one represents a Clipboard. Click on this icon to select the text, then copy to the Clipboard of your computer by pressing Control-C key combination.

  If the text is not highlighted when you click the icon, select it in triple - click anywhere inside the box. Do not select the whole page, just the text in the box.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you see an error message in the Terminal as "Syntax error" or "Event not found", enter

  exec bash

  and press return. Then paste the script again.

  10. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  11. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

  [Process started]

          Part 1 of 4 done at … sec        …        Part 4 of 4 done at … sec

          The test results are on the Clipboard.

          Please close this window.

  [Process completed]

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final "Process complete" message. If you don't see it in about 15 minutes, the test probably won't be all within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something. If you close the window of the Terminal, while the test is still running, the partial results will not be saved and you have to start over.

  12. when the test is finished, or if you have stopped it because it was taking too long, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see, but rather to see a mass of gibberish, you don't expect the "Completed" message is displayed in the Terminal window. Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  13. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but what're told you to do maybe not. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  ______________________________________________________________

  Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the "Test of diagnosis" referenced), I reserve all rights except as provided in the terms of use agreement for the site of Apple support communities ("CSA"). ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• MacBook Pro slow and stop, memory or HARD drive or motherboard?

  These last few months my Macbook Pro medio 2012 begins to slow down. I was thinking of a resettlement but has not had the time yet.

  Last month, he really slow started to freeze and stops instantly. It reboots and then I get a gray screen saying with the icon (a card with a questionmark in there) that it cannot find the boot disk drive. I close it again with the button and restart, then it starts normally. This would have me believe it has something to do with my HARD drive or the motherboard, but then again I'm not a tech guy so I guess just really. Then I got the idea to do a test of material, with this error as a result: 4MEM/62/40000000: 0x81d97590

  After searching the Web, it would mean that my memory would be bad/broken. I read in another post to download an app called 'Remember' which tests your RAM. I tried yesterday and it worked fine, nothing was wrong. But today I did once again when my Macbook was slow functioning again and went to do some other stuff. When I came back my Macbook has a black screen, a Word to insert a boot disk. I just stopped and restarted again and started normally. It is a little slow to clear grey screen with the apple logo.

  So my question is, does anyone know where the shoe pinches, RAM, HARD drive or the motherboard? Will also contribute to a reinstall? Can I check if my RAM is always placed properly or is maybe dirty? I use an application called memory monitor for clean working memory from time to time. I'm updating to El captain, wanted to do it instantly when I want to do a clean install on my mac, but I think I'll wait with that I know where the problem lies.

  Really hope someone can help me!

  Kind regards

  Mike

  This was the report on closing down:

  accident report

  Anonymous UUID: 2DD0FAD1-4D38-B739-F019-9F395B5DB6AD

  Sam Nov 28 17:54:55 2015

  Panic report *.

  panic (cpu 0 0xffffff80037c127e appellant): "launchd died\nState to the last Exception:\n\n"@/SourceCache/xnu/xnu-2782.50.1/bsd/kern/kern_exit.c:363.

  News of the UUID:

  uuid = 0x7fff61d7e000

  uuid = 0x108fa1000

  uuid = 0x108ff1000<4396b358-725e-3ec0-bcbb-e4bf75fe1fb0>

  RAX: 0 X 0000000002000001, RBX: 0000000000000006 RCX 0 X: 0X000000010A2800E8 RDX: 0 X 0000000000000000

  RER: 0X000000010A2800E8, RBP: 0X000000010A280190, IHR: 0X000000010A27FF40, RDI: 0 X 0000000000000001

  R8: 0 X 0000000000000000, R9: 0X0000000108FE09F0, R10: 0X00007FFF91399B02 R11: 0 X 0000000000000206

  A12: 0 X 0000000000000000 R13: 0X00007FFF9688D7E0, R14: 0X000000010A2805D0 R15: 0X000000010A280790

  RFL: 0 X 0000000000000206, RIP: 0X00007FFF9139795A, CS: 0 X 0000000000000007, SS: 0 X 0000000000000023

  Wire 0xffffff8021e8a970

  0x00007fff9768fdab

  0x00007fff9768fec8

  0x00007fff976893b4

  0x00007fff9c109a6c

  0x0000000108fcf907

  0x00007fff96a7de73

  0x00007fff96a80dc7

  0x00007fff96a80a1c

  0x00007fff942c5a9d

  0x00007fff942c33dd

  0 x 0000000000000000

  Wire 0xffffff80220c1798

  0x0000000108fb8c91

  0x00007fff96a7de73

  0x00007fff96a815cd

  0x00007fff96a81030

  0x00007fff96a80bef

  0x00007fff96a80a1c

  0x00007fff942c5a9d

  0x00007fff942c33dd

  0 x 0000000000000000

  Wire 0xffffff8021e8a000

  0x00007fff96a8226e

  0 x 0000000000000000

  Wire 0xffffff8021fb15c0

  0x00007fff96a81925

  0 x 0000000000000000

  Wire 0xffffff803a4bd000

  0x00007fff96a8a4e6

  0x00007fff96a8293b

  0x00007fff96a813bc

  0x00007fff96a81030

  0x00007fff96a80bef

  0x00007fff96a821a3

  0x00007fff942c605a

  0x00007fff942c5fd7

  0x00007fff942c33ed

  0 x 0000000000000000

  Wire 0xffffff8037edb2e0

  0x00007fff8fbeaf1a

  0 x 0000000000000001

  0x00007fff61d8a475

  0x00007fff907537b5

  0x00007fff9765e648

  0x00007fff9688d7e0

  0x00007fff9688fddf

  0x00007fff96a7de73

  0x00007fff96a7e8ca

  0x00007fff9688e0a7

  0x0000000108fcc393

  0x00007fff96a7de73

  0x00007fff96a815cd

  0x00007fff96a81030

  0x00007fff96a813bc

  0x00007fff96a81030

  0x00007fff96a80bef

  0x00007fff96a80a1c

  0x00007fff942c5a9d

  0x00007fff942c33dd

  0 x 0000000000000000

  Wire 0xffffff8025fd2e28

  0x00007fff942c33dd

  0 x 0000000000000000

  Mac OS version: 14F1021

  Kernel version: kernel in Version 14.5.0 Darwin: kills Sep 1 21:23:09 PDT 2015; root:XNU-2782.50.1~1/RELEASE_X86_64

  Kernel UUID: 06D286E3-A8A1-3BE7-A7EB-EAC6E0C69758

  Name of system model: MacBookPro9, 1 (Mac-4B7AC7E43945597E)

  an application called 'Remember' which tests your RAM. I tried yesterday and it worked fine, nothing was wrong.

  This is not the right way to think about memory problems. When the test of the RAM ALL said that there is a problem, it's the truth. RAM problems are very difficult to isolate, and a diagnostic runs, but can't find the problem, if NOT "nothing was wrong" which is "he cannot find the problem immediately."

  This isn't a mystery. DIMM RAM, not another thing is more likely to fail. Then you could try Rember running all night, you could try to remove one of your DIMMs and see if chess stops, you can try to get a new DIMM and see if they work better.

• Mid-2012 retina Macbook Pro does not stop

  My mid-2012 retina Macbook Pro running El Capitan (v 10.11.5) won't shut down or restart. Taken to the Apple store where they ran diagnostics on it and can't find anything wrong. Suggested I have reinstall the OS. I reinstalled, then backed up with Time Machine. The problem persists.

  I think I can get a report of incidents which may be helpful, although I've never shared before. To include or omit any information would be helpful.

  Especially the crash report reads "identifier" and "responsible" as: "com.apple.AmbientDisplayAgent". Type 'Exception' is ' EXC_BAD_ACCESS (SIGSEGV) "and the" subject crashed ' reads ' queue 5 sending: DispEventQueue "."

  Any help would be appreciated.

  I see now mid-2012 retina Macbook Pro El Capitan (v 10.11.5) running.

  It does nothing?  I think I would resume.

  They run the VST (video-Test systems)?  If this isn't the case, I'll ask for it.

  https://www.Apple.com/support/MacBookPro-videoissues/

• MacBook Pro didn't stop, finder it prevents

  Since the update to the latest version of El Capitan (10.11.5) my macbook can't stop. When I select shut down (or restart or log off) disappears from the bar menu at the top, and nothing else will happen. I can open other apps which causes the menu bar of back, but if I right click on finder, it says it's not answer and stimulus, it does nothing. He stops the fine if I boot in safe mode, but still don't work when I boot normally and I have tried resetting the PRAM that has not changed anything either.

  Any help will be greatly appreicated, thank you

  Hello

  Reset the reset management system (SCM) controller on your Mac.

• Transfer CS4 of Imac to Macbook Pro Indesign has stopped working

  I have Cs4 and recently upgraded to a Mac Book Pro but Indesign no longer works. I want to do a clean install, but do not have a dvd player. Can you provide me with access to a download of CS4 so I can reinstall the software. I assume that it was because the new Mac is on Maverick OS and international standards was not thanks

  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

• MacBook Pro(MID-2012):Issues after Upgrading to El Capitan

  I use Macbook Pro mid-2012 version. After upgrading to El Capitan, I am facing a lot of questions.

  (1) the DMG files does not open. said hdiutil attach has busy resource failed.

  (2) my Macbook Pro will not stop completely.

  (3) my systems updates install completely. They hit each other between installation (had to force quit)

  ' (4) ' about this Mac ' gets hit when trying to access storage tab.

  Any suggestions?

  Your MBP was working perfectly before the update?

• MacBook can not be stopped:

  MacBook Pro cannot be stopped: no display, the trackpad that is unresponsive.

  How to force the quit

  Do you want to say that the usual method of Apple logo (upper-left) and select "Force quit" in the drop down in the drop-down menu, does not work?

• MacBook Pro A1260 replacement HARD drive and reinstall OS

  Hello

  After more than 8 years my Macbook Pro has "finally" stopped working. I discovered the problem is the HARD drive and I wanted to replace it with an SSD, but I don't know if I can? Also to reinstall everything with a new hard drive do I need I know that I need the original DVD with the operating system but my superdrive drive obviously does more centuries ago (bad quality on the right?) and I left the DVD at home (Italy), now I live in the United Kingdom. As I do not think that my Mac has a Mode to retrieve Internet, can I just make a usb bootable with El Capitan (the one I was currently using) or I need a previous operating system? I think the native Mac with Leopard.

  Hope someone can help me.

  Thank you very much

  John

  You can install an SSD in your MBP as long as the form factor SSD 2.5 ".  OWC and Crucial get my nod as the best for Mac compatibility.

  You can get the installation disks in double for your MBP of Service model Apple customer.  Or you can order this Snow Leopard disc:

  http://www.Apple.com/shop/product/MC573Z/A/Mac-OS-x-106-Snow-Leopard

  You can use an external DVD drive or the DVD drive, another Mac connected to yours.

  Ciao.

• MacBook Pro slider is not clicking on things. normal mouse/trackpad

  Hello

  The cursor on my Macbook Pro retina 2012 stopped affecting what I click on.  The mouse and trackpad are normal, the cursor will move normally, but nothing is affected when I click. I tried a USB, mouse, but still does not.

  I turned he walks to the switch, it left overnight, but it still does not.

  Recently he has had a problem one or twice with the warning of problem of sleep/wake, don't know if that is related.

  He carries the original operating system, cannot tell you what it is b/c I can't open the info.

  In addition, my office has had the same problem 2 days ago, which picked up after leaving it and unplugged overnight. Strange coincidence?

  Help, please!

  Hello inafromfitzroy,

  If your Mac does not respond to the commands of your mouse or trackpad, first try to reset the system management controller (SMC) and the LANDAU.  Start safe mode, and then see if you are able to navigate through your system.

  Reset the management system (SCM) controller on your Mac - Apple Support

  OS X Yosemite: reset PRAM your computer

  Try safe mode if your Mac does not end commissioning

  Start in safe mode

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Take care