MacBook Pros overheating because Mac OS Sierra

My end of 2014 MacBook pro 13-inch has been overheating since the installation of Sierra. 10 minutes, it's warmer than normal, 20 minutes, too hot to get on your knees. Open and run a partition with el capitan don't cause overheating after about an hour. Does anyone else have this problem? Fan control SMC said it is running at 137 degrees fahrenheit.

The problem is related to the old system that you updated, no Sierra. A possible problem is if SMC fan control is compatible with the Sierra.

Activity Monitor to kill Runaway processes

Use the monitor activity on your Mac.

Vity applications of Runaway can shorten the battery life, affect performance, and increase the heat and fan activities.

Tags: Notebooks

Similar Questions

  • If I buy the photographer package, can I install on my macbook pro and my mac mini desktop. Where can I get this twice, one for each?

    If I buy the photographer package, can I install on my macbook pro and my mac mini desktop. Where can I get this twice, one for each?

    Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

    -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

    -Windows or Mac has no importance... 2 on the same operating system or 1 on each

    -Two activations on one account CAN NOT be used at the same time (to be noted in the link above of the license)

    -An individual account is for one person and may not be shared with anyone else

  • MacBook Pro hangs after upgrade to Sierra

    Hello

    I got no internet related topic by Googling on the subject.

    Basically, my mac has worked fine before updating the operating system most recent.

    Now when I use my Safari to surf on Internet, 9 of 10 times the laptop breaks down.

    Can anyone suggest solutions?

    Please notify.

    Thank you.

    TIG

    Hi cocomalully,

    Welcome to the communities of Apple Support!

    We understand that your unexpected Mac restart after update to Mac OS Sierra. This sounds like a frustrating situation, but we are here to help.

    To begin troubleshooting unexpected reboot, we propose first of all read and working with the suggestions in the following article:

    OS x: when your computer spontaneously restarts or displays "your computer restarted because of a problem." - Apple Support

    See you soon!

  • MacBook Pro crashed after loading the Sierra

    Charge of Sierra (September 22, 2016) on my MacBook Pro (early 2011) and now it crashes.  The computer was working fine before the update.  Can I cancel the new operating system or how can I fix the problem?

    Difficulty installing Sierra

    Try each of them in order. A test to see if the computer works properly:

    1. Reset the PRAM
    2. Reset the controller (SMC) system management
    3. Start the computer in Safe Mode, and then restart normally. It's slower than a standard home.
    4. Repair the disk by booting to the HD recovery immediately after that the chime press the command and R keys until the Utility Menu appears. Choose disk utility and click on the continue button. Select the withdrawal (usually Macintosh HD) volume entry of the list to one side.  Click first aid button in the toolbar. Wait the fact button appear. Disk utility and return in the Utility Menu. Restart the computer from the Apple Menu.
    5. Reinstall OS X by booting from the Recovery HD using the command and R keys. When the Utility Menu appears, select reinstall OS X and then click on the continue button.
  • Slow MacBook after updating to mac os sierra

    Mac book is very slow after updating to mac os sierra. I try to open an app and its very slow, or finder

    How can I fix it?

    I already rebooted it but no luck

    I have a mac book pro end 2011 version 10.12

    Back up your Mac if you have not already done so. Read https://www.apple.com/support/backup/to learn how to do this please. To learn how to use Time Machine read to use Time Machine to back up or restore your Mac.

    Then, shut down your Mac and restart in 'Safe Mode '. To learn how to do it please read: try safe mode if your Mac does not start-up. Compare works your Mac in Mode for how safe it was.

    Then restart normally. If the same problem comes back, please read the section If a problem does not occur in safe mode for actions recommended to Apple.

    Finally, you can temporarily create a new user account and log into this account to determine if the problem also exists when connected to this account. To learn how to do read how test a question in another account on your Mac - Apple Support. When you are finished troubleshooting, you can remove the temporary user account by following these instructions: OS X El Capitan: remove a user. Before you delete, confirm that you have not need of all the files that you have possibly set in this account.

    Let me know what you decide.

  • MacBook Pro 13 inch: Mac Pro does not connect to 5510 e printer

    I have problems connecting with one of my printers.

    My iMac will connect with my printer (an HP Photosmart 5510e and Photosmart 7280) wireless without any problem.  My 13 inch (2009) MacBook Pro connects to the 7280 wireless but does not connect to the HP Photosmart 5510e device.

    I recently had to restart my MacBook and reconnected it to a printer without any problems.  I can't find the driver for a printer so I don't know if the 5510's could not reload when I did the reboot.

    Any suggestions as to what I should have fact/do to recover from the situation?

    @Hahti

    You have installed the driver yet?

    http://support.HP.com/us-en/drivers/selfservice/HP-Photosmart-5510-e-all-in-one-printer-series---B1/5053904/model/5053905

    REO

  • Try to download PS, I, ID CS6 macbook pro laptop for mac desktop monitor. Help!

    I have a macbook pro and I have PS, and ID CS6 but I have lost the serial number... Please help!

    Please go through: https://helpx.adobe.com/x-productkb/global/find-serial-number.html

  • MacBook pro restarts because of the problem.

    My MBP restarts every few minutes. Can anyone help based on my report of panic? Thank you!

    If you don't start and connect to the usual, please try in safe mode.

    At startup, you will see a progress bar and then the login screen, which is displayed even if you normally connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

    Log in as an administrator to perform these instructions. If you have more than one account, you are the administrator.

    If you don't see any report, but you know, there was a panic, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

    Safe mode is slower than normal, and some things do not work.

    Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or the boot volume is a software RAID, you cannot start in safe mode.

    If you are able to connect, launch the Console application in one of the following ways:

    ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad and start typing the name.

    In the Console window, select

    DIAGNOSIS AND diagnostic USE information reports ▹ System

    (not diagnose them and use Messages) in the list of logs on the left. If you don't see this list, select

    List of newspapers seen ▹ display

    in the menu bar.

    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports. A report of panic has a name that begins with "Kernel" and ends with ".panic." Select the most recent. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

    I know that the report is long, perhaps several hundred lines. Please report all this anyway.

    If you don't see any report, but you know, there was a panic, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

    In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

    Please do not post other types of diagnostic report.

    When you post the report, an error message may appear on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

    If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  • USB ethernet does not work after update to Mac OS sierra

    Hello

    I use end of 2014 Macbook pro 15 "running Mac OS Sierra.

    Before the update for sierra, Captain, EL on OS USB ethernet has been working well, but after that the update for Sierra USB ethernet does not work, "showing the cable disconnected.

    Please advise and thanks in advance.

    Do you use the Thunderbolt Apple > Ethernet card?

    -Try to reset memory NVRAM/PRAM and SMC

    MacIntel: Reset of the controller (SMC) system management

    https://support.Apple.com/en-us/HT201295

    Subject of memory NVRAM and PRAM

    https://support.Apple.com/en-us/HT204063

    -Try to start safe mode

    OS x: what is Safe Boot, Safe Mode?

    https://support.Apple.com/en-us/HT201262

    -Start to recovery and repair the startup disk

    OS X: on OS X Recovery - Apple Support

    https://support.Apple.com/en-us/HT201314

    The adapter works in recovery mode?

    This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

  • The Sierra of MacOS will propose for the Mid 2009 MacBook Pro in the near future?

    I have a model Mid 2009 MacBook Pro and when I try to upgrade the software of OS systems to the Sierra, he refused my request to download because it "cannot be downloaded to this computer." I noticed other Mac computers, for example, iMac Mid 2009 or newer and MacBook Mid 2009 or more recent systems only one are close to mine are candidates to download the software, but the MacBook Pro is the only one that is not on this list for availability. So, my question to my question is, will be available Mid 2009 MacBook Pro updated to day for Sierra anytime soon? And if not, why?

    Please let me know what your answer is as soon as possible.

    Thank you!

    My answer is no.

    However, as long as I and everyone here, do not work for Apple, my answer is certainly not authoritative.

    However, as I've used Apple computers for more than 30 years, he never had a case when they released an additional OS that works on previously excluded material.

  • MacOS for MacBook Pro early 2009 Sierra

    I wonder if the MacBook Pro early 2009 to MacOS Sierra at any time in the future
    I have attached a picture of my macbook pro information

    Mac compatible:

    The official list of Mac compatible with macOS Sierra:

    Towards the end of 2009 or later

    • MacBook
    • iMac

    2010 or later

    • MacBook Air
    • MacBook Pro
    • Mini Mac
    • Mac Pro

    Your machine is not compatible Sierra. You are at the end of your life upgrade of OS X.

  • How are they managing storage Flash on my Macbook Pro?

    Hello, I have storage problems with my macbook pro, simply because I miss. I went through and eliminated a lot of my videos and photos because that's mainly what I use this for, but my storage is full. How to clear up the flash storage?

    For the other category in the display of information storage, see this support article. If the display appears to be inaccurate, try to rebuild the Spotlight index of the boot volume ("Macintosh HD", unless you have given it a different name.)

    Empty the trash if you don't have it already done. If you use iPhoto, emptying his trash internal everything first:

    ▹ iPhoto empty the trash

    In pictures:

    ▹ Show of the recently deleted ▹ file delete all

    Do the same thing in other applications like Aperture, with an internal feature of the trash. Then, restart the computer. Temporarily, which will free up space.

    According to the documentation from Apple, you need at least 9 GB of free space on the boot volume (as shown in the Infolog) for normal operation, not the mythical 10%, 15% or any percentage. You also need enough space to allow the growth of the data over. There is little or no advantage in terms of performance to get more free space than the minimum Apple recommends. Storage space you'll never use is wasted space.

    When Time Machine backs up a Mac laptop, some free space will be used to make a snapshots the, who are backups of deleted files recently. The space occupied by the local snapshots is declared as available by the Finder and should be considered as such. In the view of storage of the information system, snapshots appear them as backups. The snapshots are deleted automatically when they expire or when free space becomes less than a certain level. You don't need to usually and should not, remove snapshots them yourself. If you have followed the bad advice to disable snapshots the running a shell command, you may have ended up with a large amount of data in the other category. Ask for instructions in this case.

    See this support article for some easy ways to free up storage space. A common waste of space is old backups iTunes to mobile devices. As shown in this support article, select the devices tab in the iTunes preferences window, select the backup that you want to remove and click on delete the backups. Keep at least a backup of each device you use yet.

    You can, if you wish, use a tool such OmniDiskSweeper (ODS) to explore the volume and discover what is take up space. You can also delete files with it, but not unless you don't know you know what you remove and that all data is stored safely. This means that you have several backups, not one. Note that the ODS only works with OS X 10.8 ("Mountain Lion") and later versions.

    IMPORTANT: This comment is neither a recommendation nor an endorsement of any third party software. You should always do your own research to determine if the unknown software is safe and useful. Don't take the word of anyone, including mine.

    Deletion of files inside a photo library or iTunes will damage the library. Such a library should be changed within the application that created it. It is the same for e-mail files.

    Go further than if the problem is not resolved by the steps above.

    ODS cannot see the whole file system when you run simply by double-clicking; He sees only the files that you have permission to read. To see everything, you must run it as root.

    Back up all the data now.

    Install the application in the Applications folder as usual. Quit it runs.

    Triple-click any where in the text line below on this page to select, then copy the selected text in the Clipboard by pressing Control-C key combination.

    security execute-with-privileges /A*/OmniDiskSweeper.app/*/M*/* 2>&-

    Launch the Terminal application integrated in one of the following ways:

    ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

    ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad and start typing the name.

    Paste in the Terminal window by pressing command + V. You will be asked for your login password.

    The application window opens behind other open windows. When you scan a volume, the window will finally show all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.

    I do not recommend that you make a habit of doing. Do not delete anything as root. If something should be deleted, make sure you know what it is and how it got there, and then remove by safer alternatives. If in doubt, leave it alone or ask for advice.

    When you are finished with the app, he quit and also to leave Terminal.

  • Cannot connect to apple tv for Mac OS Sierra

    Hello

    I upgraded my Macbook Pro (Mid 2012 retina) to Sierra de MacOS. When I am trying to connect to apple tv by clicking on the AirPlay icon and click on my Apple TV it asks me to insert a password! Apple TV displays an access code and I use it but it gives me this error:

    Cannot connect to 'Apple TV'

    I upgraded my Apple TV to the last tvOS (10.0). And it gives me the same error.

    I tried to turn on the access code and password on Apple TV AirPlay adjustment but same error. Off, same error.

    Help, please.

    Thank you

    Hooman

    Did you get anywhere with this? I have the same problem.

  • PowerMac Pro doesn't recognize the MacBook Pro in target disk mode

    I'm trying to restore a disk from MacBook Pro from a backup, but my PowerMac Pro does not seem to recognize the MacBook Pro in target disk mode.  I have a FireWire 800 cable and adapter to the thunderbolt FireWire 800 port.  Is there something more I should do to get the Mac Pro power to recognize the MacBook Pro in disc mode target like an external hard drive?

    There is no "Power Mac Pro;" are you referring to a Power Mac (which would be less than 11 years), or a Mac Pro? You try to migrate data from the MacBook Pro to another Mac, or vice versa?

  • Use the iPad pro as a second screen on a Macbook Pro 2009 with OSX running on it.

    Hello
    I am to buy an iPad Pro and I would like to know if there is a chance that it might be connected as a second monitor on a Macbook Pro 2009 running Mac OS x Snow Leopard 10.6.8.
    Thanks in advance for your help.

    M.

    Hello

    You cannot connect them with wires. You can, however, all these 2 combinations of applications, use using your wifi home network:

    http://Lifehacker.com/the-best-second-screen-app-for-iPad-1706351639

    http://getidisplay.com/

    However, they all need two OS 10.9 (Mavericks) or later, which means that the configuration is not possible under Snow leopard.

    Your Macbook Pro supports the latest OS X (El capitan), you can update, although it will significantly slow down your computer as well unless you add an SSD.

    See you soon,.

    James

Maybe you are looking for