MacBook screen is not unique to the wide

Similar Questions

• My 2009 macbook pro will not load.  The technician said that the motherboard must be replaced.  Is there a less expensive repair?

  My 2009 macbook pro will not load.  The technician said that the motherboard must be replaced.  Is there a less expensive repair?

  Apple has set the rates, price around $300 repair program.  I don't think you can get a price of paste elsewhere.  However, there are third-party sites that provide repairs, parts and helpful videos.  Google is your friend.

• MacBook Pro will not play on the old stereo amplifier

  I'm playing together stereo music from Spotify or Youtube on an old.  I have my Macbook pro connected to speakers Audio Engine A2 (with integrated DAC) via the USB port.  Then form of the output of the A2s RCA cables go into my old fisherman amplifier CA-876 connected to NHT 2.5I speakers.  Music comes from the A2s but not the NHTs.  The counter on the sinner is not moving, it seems that the amp is not picking up the signal.  Thank you very much for the help!

  If you play other audio such as system sounds or local audio files it works there? If you connect the outputs of A2 to something that works? If you connect something else in the entrance of the Fisher does it work?

• Superior 1/4 screen does not respond to the mouse - cannot disconnect sites when Logout button is in this area, IE. Facebook, banks, etc.. This does not happen with IE. I reinstalled Firefox without result.

  Menu bar, tabs, history, research, etc. work fine, but in this area, I am unable to access anything whatsoever. For example, on the Firefox help screen the area on the right side of the screen that shows my user id - Sign Out - Inbox - and other applications will not respond to the mouse. Therefore, I will be unable to sign using Firefox. This is true for every Web site I have access. Fortunately, at least one of the banks that I use has an additional journal on area at the base of the screen that can be used.

  Recently, the extension of the Yahoo! toolbar and the extension of Babylon have been reported to cause a problem like that. Disable or uninstall the modules.

     * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
  

• I don't know but its all white: my tablet screen does not light, but the sounds and touch are ok. Please help me!

  I dropped it and now the screen does not light, but sounds like the notifications are on.

  Hi!, Sensei:

  Welcome to Forum!

  To help you, is necessary that you enter make, model (without serial number) and operating system.

• Screen does not light after the start, but after standby on Satellite M100

  Hello
  I have some experience with computers and laptops, but this problem exhausted all of my knowledge.
  My girlfriend has a Toshiba Satellite M100, PSMA1E. He currently works on Windows XP, SP3.
  The laptop has always had problems closing/stand bye. He would stand bye and the screen would not. She would usually be manually turn off (holding the power button) and restart.

  Same thing happened last week, but with me. I turned off the power button but when I turned it on the screen was completely black. After a few attempts, I realized that everything worked; I could hear the usual audio files and XP Boot, but there was no way I could get the job of the screen.

  The strangest thing is that the CMOS/BIOS, one with the Toshiba logo settings screen, also does not appear. If it's an OS problem, I thought that I would be able to access the BIOS at least, but it does not work. FN + F5 does not work.

  Then, strange yet something happened. I was turning it on and off with keyboard shortcuts and I realized that if I put on stand bye using shortcuts and then go back on the screen turns on perfectly well (there is a cause of adjustment resolution icons are irrelevant, but it works perfectly fine).

  From that on I tried everything I know. Update the BIOS, all Windows XP updates, all Toshiba QuickFix, cleaning the registry with different tools, uninstall and reinstall the video driver (ATI Radeon X 1400) utility, shortcuts keyboard, power saver, tools hardware Toshiba, looking to start up programs, services, everything I could possibly think off.

  What intrigues me is that the Toshiba start screen will not be displayed. I can't access the BIOS, but I tried to restore the standard values of the BIOS with Toshiba hardware tools. It did not work. I don't even know if reinstalling XP will work because whenever I turn it on it is all black and I have to make the stand bye / Tower on Tower.

  When I have it plugged into an external monitor, I could see all starting the process (initial screen of the BIOS and Windows). I then tried to access the video driver display configuration but it would show only the external monitor. It would only detect the laptop screen after a stand bye / turn back on, and then it worked perfectly: the screen two screens simultaneously, extended, everything. Ah, changing BIOS selection automatic the LCD + external monitor does not work.

  I am really puzzled here and I can't understand it. I really don't think it's a hardware problem, because the screen works 100% after the stand bye. I guess that XP is do something during the closing down that completely 'stops' my screen, even after starting, and then I can only turn it on with the thing stand bye.

  Any help would be really appreciated!

  Best,

  Hi guys

  I had a similar problem on a series of Satellite A200 and I could solve works to update the BIOS and update the graphics driver.
  In addition, you must make sure that all available MS fixes and patches have been installed.

  Unfortunately, but that's all I can suggest. If the problem persists and you would not be able to solve update components then an ASP needs to check.

  Good luck

• Bug: The screen does not sleep when the phone is plugged in / recharge

  The screen is not automatically timeout if the phone is connected via USB - it doesn't seem to be an option to change this.

  Looks like the screen is activated by default when loading, which means that it takes more time to load.

  Go into the settings of-> Applications-> development-> stay awake (uncheck)

• How to retrieve info from my i5c if the screen does not work and the warranty has expired?

  My iphone 5 c screen does not work and my warranty has expired there is 138days. I visited my carrier (AT & T) and contacted the Apple support.

  I want just the information of contact at least if nothing else my phone. What can I do?

  Have you tried to backup with iTunes on your computer?

  Are you also the timing or the iCloud backup device?

• Pavilion 500-449: monitor screen does not work with the new HP Pavilion 500-449

  Not sure if 64-bit or 32-bit.  More HP vs 19 flat screen LCD monitor or new monitor LG Flatron E2242 will appear with new HP Paviion 500-449.  Both will be lit.  Monitor says HP VGA No. imput and goes to sleep.  LG monitor says it's to enter the mode, same thing, I guess that energy saving.  The two appear on older HP Pavilion a1430n.  Store support suggests the problem lies in the monitor menu options but they do not display with a try monitor.

  Abandoned and reduced to store.  When they were scuffered too until they tried a second monitor in the back and noticed that it connected to a different place in the back!  Seems a converter is needed for old VGA monitors and then he plugs into a completely different place.  Originally, the husband plugged the power cord VGA of my screen instead of ONLY on the back, he could go, the marked spot VGA.  No, the converter is a big plug and can only fit above in a place with NO Label at all.  On top of that, everything IS there a converter plug supplied in the box with the computer, but there is absolutely NO mention of what to do with it, or where it goes.    I feel better that the store did not know that either; Clips by the way, where the young man was very nice.    He only discovered by accident because the store had two monitors with different plugs on the end.

  Short Stort of long, if yours doesn't receive will check that plug that goes to the tower.  You may need a converter and it can even be provided.

• The screen does not appear under the eyes

  original title: I use a screen flat tv for my monitor & for some reason, I don't see all of the screen. He cut all half an inch around the edge of the screen. Is anyway to fix this?

  I am running XP, I have a NVidia GeForce GT 240 video card & I run it via a HDMI cable.

  Hello

  This could be due to installed the wrong display drivers or a bad resolution that has been put in.

  Method 1: change the resolution of your screen
  1. open the screen resolution by clicking on the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.
  2. click the menu drop down next to the resolution, move the slider to the desired resolution, then click on apply.
  3. click on keep to use the new resolution, or click back to return to the previous resolution.
  Click the mentioned link which will help you to change the resolution of the screen below.
  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  Method 2: refer to this article below mentioned which may help you in the matter of fixing.
  Troubleshoot Windows display the text on the monitor is not readable
  http://support.Microsoft.com/mats/Windows_Display_Quality_Diagnostics/

  Get the best display on your monitor
  http://Windows.Microsoft.com/en-us/Windows7/getting-the-best-display-on-your-monitor

  If the problem persists you can also try to download the latest display drivers on the manufacturer's Web site and try to install then check.
  Here is the link to download the NVidia drivers for the video card NVidia GeForce GT 240
  http://www.nvidia.com/object/WinXP-301.42-WHQL-driver.html

  Hope this information helps.

• Loading screen is not animated, during the operation, but after

  Hi all!

  Here's my problem: I am display a gif animated using the class presented here.

  It is used in a specific class loader that perform an action, while the gif is displayed (the gif is a spinner). Only once the operation is completed, the LoadingScreen came out of the screen.

  Here's my class loader:

  public class LoadingScreen extends MainScreen {
  
      /**
       * The action to be processed during the loading.
       */
      Runnable action = null;
  
      private AnimatedGIFField _image;
  
      /**
       * Default constructor.
       *
       * @param action the action to manage.
       */
      public LoadingScreen(Runnable action)
      {
          super(FIELD_VCENTER);
          this.setTitle(CommonTools.initTitleBar());
          this.action = action;
  
          displayAnimation();
  
          if(this.action != null)
          {
              UiApplication.getUiApplication().invokeLater(this.action);
          }
      }
  
      /**
       * Display the animation during the loading process.
       */
      private void displayAnimation()
      {
          EncodedImage encImg =
              GIFEncodedImage.getEncodedImageResource("loading.gif");
          GIFEncodedImage img = (GIFEncodedImage) encImg;
  
          _image = new AnimatedGIFField(img);
  
          getMainManager().setBackground(BackgroundFactory.createSolidBackground(Color.BLACK));
  
          LabelField label = new LabelField("Connect..."){
              public void paint(Graphics g)
              {
                  g.setColor(Color.WHITE);
                  super.paint(g);
                  }
          };
  
          HorizontalFieldManager containerSpin = new HorizontalFieldManager(FIELD_HCENTER);
          HorizontalFieldManager containerLabel = new HorizontalFieldManager(FIELD_HCENTER);
          containerSpin.add(_image);
          containerLabel.add(label);
  
          containerSpin.setPadding(Display.getHeight()>>2, 0, 0, 0);
  
          this.add(containerSpin);
          this.add(containerLabel);
  
          KasualApplication.isLoading = true;
      }
  }
  

  The problem is that the gif is not animated, while the action runs. But if I have a popup appears at the end of the action to let the loading screen, I see that the gif is animated. As well as the animation starts when the action is complete.

  I think something is wrong in the clock of my son, but I don't see that.

  Could you please help me?

  Thanks in advance.

  It's ok, the solution is described here.

• Windows 7 splash screen will not change after the vista update

  After updating vista 32 bit to windows 7 32 bits, the splash screen will not change and he showed the vista boot. I read a lot of forum and the web page, but this solution:

  «.. . the dummies and bad start screen for Windows 7 is due to the locale entry in the startup folder, which could not be set when editing or rebuilding the BCD. When the locale is not found, Windows boot loader doesn't know what local startup folder to look for the animated bootscreen. Thus, in order to fix the boot screen so that the splash screen can be re-established, restored or reset to original animated Windows 7 boot screen, just run one of the following commands at the prompt with administrator rights:

  bcdedit/set {current} settings regional en-US

  or

  BCDboot % WinDir % / l en

  Change the US to the language version of Windows 7 installed, as ja - JP, en - us, es - ARE, pt - BR, zh - CN, zh - TW, fr - FR, fi - FI and etc.

  Restart the computer after running the command to see the new boot UI (user interface) be used again. To check if the locale has been entered properly, just run the bceedit command in the command prompt that is running as an administrator... »

  not solved my problem and also know for many users... after updating vista in windows 7 splash screen stay the same...

  Thanks for your help
  Hispanico hispanico

  Hi hispanico,

  Thank you for visiting Microsoft Answers.

  I suggest you do a repair from WinRE (Windows Recovery Environment) system using a Windows 7 installation disc. Follow these steps:

  1. turn on your computer, insert the Windows installation DVD, and then restart your computer.

  2. Press any key when prompted to do so and follow the instructions that appear.

  3. when the Windows Installer page, click repair your computer to access system recovery options.

  4. follow the instructions.

  Please visit these links for more information on the Startup Repair:

  1. http://windows.microsoft.com/en-us/windows7/Startup-Repair-frequently-asked-questions

  2. http://windows.microsoft.com/en-US/windows7/What-are-the-system-recovery-options-in-Windows-7

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• laptop screen does not light and the system does not start most of the time.

  my hp g62 lptop started not starting and the monitor not turns sometimess even if it lights. with the time he had this problem more frequently. now it does not start and the monitor turns at all.  It will fuel yet but it's going to be okay. Ive tried a recovery disk, but it does not start the machine or be the monitor lights. im a beginner so any help will be appreciated.

  Hello

  This may be a trial outcome disply to connect an external monitor to your laptop and see if you get display it.

  You can connect to an external monitor via VGA or HDMI connection.  The usual process to transfer the video output to an external source is to press and hold the fn key and press f4.  Use the arrow keys to select "Projector" only and press ENTER.

  http://support.HP.com/us-en/document/c02013758

  and I also found some links that may help you

  http://support.HP.com/us-en/document/c01884928

  http://support.HP.com/us-en/document/c01443371

• HP Officejet 6700 Premium: Scan function screen does not come to the top when selected

  After updating Windows 10, the scan function when selected in the application wizard does not come to the top. Installed the driver updated, no effect.

  Hello

  Thank you for using the forum.

  You have downloaded and installed the FULL features of HP software?

  Here is the link for convenience:

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-6700-premium-e-all-in-one-printer-series-H711/4322971/model/4323605#Z7_3054ICK0K8UDA0AQC11TA930O2

  We suggest that you uninstall the current drivers before reinstalling the software downloaded full of features.

  Hope that helps.

  Please click on "Bravo Thumbs up" as an encouragement and "Accept as solution" if it helped to solve your problem.

• Touch screen does not work on the old Portege M400

  I'm trying to restore an old Toshiba Portege M400. I have WIN XP Tablet 2005 installed and which, according to me, are all the drivers. Everything works perfectly except the touch screen.

  I've been all over the web, downloaded and installed some drivers WACOM Vigneau suggested in another thread here - still no luck.

  Anyone have any ideas or experience on how to solve this problem?

  > I would not be able to use my fingernail or or a pencil eraser to type with (I don't have any kind of pen) just to test?

  To my knowledge, you have the pen in order to use the touch screen.
  As far as I know there are two pens in the portege M400.
  The reserve pen located at the bottom of the unit that there should be a slot that the second pen.