MacBook trackpad scrolls

JJust brought a new MacBook from the store, and the trackpad scrolls. Someone at - it see or heard of this happening? Y at - it software solutions n? Leaving town tomorrow and here really this operational b

It is possible (although very unlikely, unless done on purpose) for turn off the scroll in System Preferences > accessibility > Trackpad options.

Your settings should look like this:

Tags: Notebooks

Similar Questions

  • On my trackpad scrolling does not work after the upgrade to 12.0

    On my trackpad scrolling does not work after update Firefox from version 3.6.28 to version 12. It normally works in Thunderbird, and other applications. It is a Lenovo T61 with XP Service Pack 3 and all drivers up to date. Version 3 seems to have bad memory leaks so I would like to upgrade, but I can't do it without scrolling. I would appreciate any advice.

    Try to change the pref ui.trackpoint_hack.enabled on the topic: page default config-1 to 0 or 1 to see if that makes the work button.

    Close and restart Firefox after changing the ui.trackpoint_hack.enabled preferably.

  • Portege Z35-AST3N06 - Alps Trackpad scrolls in the opposite direction

    Hello, my ALPS trackpad scrolls in the opposite direction. In other words, when I want to scroll down a page I have to start at the bottom of the trackpad and scroll upwards and vice versa.

    Is there a way to get the mouse pad to scroll properly?

    Open please Synaptics settings for the touchpad and click the scroll option. You will find option Enable reverse the direction of scrolling

    Disable it and I hope your problem will be solved.

  • MBP trackpad scrolling is NOT possible

    Since I installed my iMac to my time Machine backup on my MacBook Pro for five years, the Act of scrolling (with two fingers - scroll direction: finger movement natural tracks / content) on the trackpad of the MBP does NOT work! Are all the other gestures on the trackpad. What wrong here and how can I fix?

    Without a doubt, take a look in the category of settings for Trackpad system preferences. The gesture can be disabled. Looks like you have already done this, but

  • On the trackpad scrolling direction

    Hi guys,.

    Has anyone tried to reverse the direction of scrolling in browser windows?

    that is down 2 fingers on the trackpad and the pages scroll

    I was wondering if this could be achieved by using a normative action, or if there was some sort of third-party app for this?

    Thank you.

    2011 MacBook Pro 13 "

    OSX El Capitan

    appzenny wrote:

    Hi guys,.

    Has anyone tried to reverse the direction of scrolling in browser windows?

    that is down 2 fingers on the trackpad and the pages scroll

    I was wondering if this could be achieved by using a normative action, or if there was some sort of third-party app for this?

    Select the scroll and zoom options (depending on the Mac you use, you see some of these options):

    • Direction of scrolling: natural: Select this option to move the contents of a window in the same direction as your fingers.
  • Mac book trackpad scroll BUG - summer autour forever - please fix IT!

    Hi all
    This message is intended for representatives of adobe

    I'm talking about the bug in external scrolling on trackpad MacBook and Apple trackpad

    Of course, there is workaround buggy JS, but they do not cover the scenario that we need

    Our application is a flex application, with a major scroller for the app, which is unusable on Mac

    Guys, this bug has been around for years

    last mention, I fell on that is here-

    and that's about it when it comes to Googling for a solution.

    I asked in many forums - flash, flex, Starling, feathers etc...

    all pointed to the flash drive

    If you do not open sourch execution of flash player

    Can you please fix this nasty bug?

    It is essential, and the fact that we can only wait for your priority surface lists makes your users feel powerless

    Please answer

    Please give priority to this bug

    It is at the base and cuts to a whole new market that will not be able to use our product because of this

    I erge you considered this criticism

    Thank you

    Sorry, I was just poking at this meetings yesterday.  I am coming into this cold and seemed to be a pretty big deal that I should have to hear about it at some point.

    I asked around with a couple of experts of Safari and made a more thorough search of the bugbase this morning and was able to understand what is the shading.

    Apparently, cela used to work, but stopped with the release of Safari 6.  The developer assigned the problem says that we get is more the NPCocoaEventScrollWheel event from the browser.  Indeed, we have no way to detect the activity of the scroll wheel.  This applies to both the multitouch trackpads and actually a USB mouse with a scroll wheel.

    There is a public bug tracking this issue here:  We did take it seriously, and he gave an appropriate level of attention.  In response, we have filed bugs for Safari with Apple regarding this issue on two separate instances over the past months, but we have not been able to get traction.

    I talked to the Safari team a lot lately.  I'll drop an email to the team I worked with at the surface of the issue, but it's really the extent of what we can do on our side.

    Our bug notes reference also workarounds that you pulled in the discussions as the best solution account required circumstances.

  • BlackBerry Pearl 9105 smartphones - Trackpad scrolls but will not select... Help please

    On Wednesday of this week, he was running with rain and my jeans got soaked through and the BB 9105 was front jeans pocket. Later that day, the select function of the trackpad (ie pressing down to select something) has stopped working. I assumed it was water damage as devices nowadays are sensitive to all that. The time of it all made sense. I waited until Saturday (today) and there was no change.

    I'm a student, so buy an old replacement phone wasn't an option, I need the phone, so I went to a high street phone repair shop who put a new trackpad in I think, or tight it upward (I don't know exactly). I thought this would be the end of my problems. This cost £25 to get fixed. Bottom line is, it was fixed, the trackpad worked perfectly. I asked the guy at the shop what was wrong with her, he didn't know, so I asked if he thought it was water damage, and he said he has found no sign of him but says he can be difficult to see. So, about 3 hours ago I upgraded to V6 of the software. From 15 minutes there is the same problem started with the trackpad. The store is closed tomorrow where I got the fixed phone and from Monday to Friday work hours of trash for my summer job (I wake up at 06:00 and home at 19:00 am) which means that I can't visit the shop or find someone else I know until next Saturday. I can barely afford to pay another £25 for the problem get fixed-re and guess that the guarantee has been cancelled because of that be tampered with to get fixed.

    I don't know what to do, I tried posting on other forms with sections of BB, but still had no answer. Please if you can give me any advice in regards to security, or how I can fix the trackpad problem without paying a large sum of money he would be really appreciated.

    Sorry if I went on a bit, but I appreciate reading you my thread.

    I don't want to get into an issue with you here. Have the phone in your pocket when it rains, and drop your phone in the Toilet or bath or water in general is two different things. I wouldn't be on here if it happened because it is completely my fault, but if a mobile phone is unable to manage on a daily basis, then I think that the manufacturer is responsible. Or do I buy a jacket for rain for my phone

  • Mac OsX trackpad scrolling?

    It seems that whenever I try to scroll upward in a Flash/Flex application, the content gets automatically scroll down...

    I use a Mac to date under OsX Lion with the latest version of Flash Player th!

    Anyone have an idea what is wrong?

    We did some research more into our code base to achieve ship an old library of a previous project, dated 2008, in which we faced problems of scrolling on the Mac computers: (ExternalMouseWheelSupport - nalMouseWheelSupport.html)

    We have removed and here!

  • Trackpad MacBook Pro late 2011 does not not after upgrade

    I just update the OS in my MacBook Pro (late 2011) which worked perfectly well 'El Capitan' to 'Sierra '. Everything went, smooth and pleasant. but now, the trackpad is completely erratic, is in itself (such as move and open programs like possessed). I tried several suggestions from apple such as checking for updates, check the settings, delete all the gestures, etc. I'm assuming that the material is very well that was perfectly fine yesterday... any suggestions please help.   -Note; I have to use an external mouse, and the latter is very well.

    Hello Med_,

    Thank you for using communities of Apple Support. It is my understanding that after upgrading to Sierra, your MacBook trackpad has become erratic. I know that my trackpad is an important part of my daily use, I can certainly understand your concern. I'm here to help get this resolved with you.

    You did an excellent job so far! Then I recommend the system management controller (SMC) reset. This system can solve some unexpected behaviors. Follow the steps below:

    1. Stop the Mac.
    2. Unplug the MagSafe from Mac power adapter.
    3. Remove the battery. (Learn about removing the battery in the MacBook and MacBook Pro computers).
    4. Press and hold the power button for 5 seconds.
    5. Reconnect the battery and the MagSafe power adapter.
    6. Press the power button to turn on the Mac.

    The LED on the MagSafe power adapters could change State or temporarily disable when you reset the SMC.

    Reset the management system (SCM) controller on your Mac.

    If the problem persists, test this problem in safe mode. This will allow you to exclude the software as the cause. To help get started in safe mode and additional steps, use the steps and the link below:

    1. Start or restart your Mac.
    2. As soon as you hear the startup tone, hold down the SHIFT key.
    3. Release the SHIFT key when you see the logo Apple appears on the screen.

    After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

    To leave safe mode, restart your computer without pressing any keys during startup.

    Try safe mode if your Mac does not end commissioning

    See you soon!

  • two fingers scrolling down does not work

    After the upgrade to OS Sierra my Macbook air (2015) trackpad scroll (two fingers) does not work. Please provide a solution. Thank you

    MacBook Air (13 inch, early 2015), OS X El Capitan (10.11.1)

    It took a little time, but I found a solution.

    1. In System Preferences, open accessibility.
    2. Use your keyboard to scroll down on the left side of the mouse and Trackpad.
    3. Click the Trackpad button.
    4. Uncheck scroll and click OK.
    5. Click the Trackpad button.
    6. Scroll to check again, and then click OK.
    7. Check that this set.

    It worked for me. Good luck to you!

  • Disable scrolling of three fingers

    Is there a way to disable three finger scrolling (while keeping two fingers scrolling) on the MacBook trackpad? I think I can scroll with two and three fingers, but want it only for two.

    You can follow an article from apple: gestures multitouch for use on your Mac - Apple Support

  • Two fingers scrolling does not not in Chrome to the touch screen?

    This seems fine in Internet Explorer, someone may it confirm so I know that's not just my setup?

    The trackpad scrolling is fine in both, just the screen touch doesn't scroll not workingin Chrome for me.

    Thanks someotherguy, it's good enough for me confirmation

    This is my first Thinkpad, only had a few days ago and I wanted to make sure it was nothing that I had done wrong.

  • s230u trackpoint scrolling acting funny in the modern user interface


    I just got my Twist and all using it, I noticed that when you use the TrackPoint scrolling feature in the modern UI or apps from the modern UI that she acts like I'm using the arrow keys, it is more evident in the Startscreen. It works as expected on the desktop and the trackpad scrolling works as expected everywhere. The first thing I did when he got home was to run all updates that everything wanted, so I'm on the latest version of the driver.

    Does anyone else know this and nobody knows how to fix?

    EDIT also since this is my first ThinkPad, is this normal behavior?

    I think it's normal. Frankly, if I use a modern user interface program I'm probably scrolling by touching the screen in any way, so it's not something I often noticed.

  • My screen zoom

    I have a MacBook Air OS X 10.9.5.  All of a sudden I can't zoom in my screen in Safari using my fingers on the mouse pad.  I don't know what I did.

    Click the , click Preferences > Trackpad > scroll & Zoom and make sure that the option to Zoom In and Out is checked.

    See you soon,.


  • El Capitan - quicktime player does not launch

    I have a new Macbook Pro with El Capitan. It has very little software installed on it and I did not fundamental changes. I see the QuickTime Player icon in the Applications, but when I select it, it is to open a new search folder. The application does not start. Google and supportive research show no response to this and I can't download or install QT on the web site, as it is said that it is built in. Ideas?

    Hi loadtester,.

    Sorry for the confusion about QuickTime.  Yes, you are right that a Finder window appears.  If you had a file that you have wanted to play using QuickTime, select you in the Finder window and choose open.   If this is not the case, click done, and then head up to the menu bar in the upper left corner of your screen and next to the word QuickTime, you will see the file.  Choose file, and then click the option you want (new movie recording, etc.).  But before do you, click the help command on the menu bar, to learn how to use QuickTime Player.   The resources below will outline as well:

    How to use QuickTime Player

    Use QuickTime Player (version 10) to play, record, edit and share video and audio files on your Mac.


    Use the playback controls to play, pause, rewind, fast forward, adjust the volume and take other actions. Controls appear when you move your pointer over the QuickTime Player window, and they hide when you move your pointer away.

    To quickly move forward or backward through the timeline, swipe with two fingers on your trackpad, highlight with your mouse, or drag the handle in the timeline panel. You can also, repeatedly click on fast forward or rewind to increase the speed of reading in increments.

    To view a video in full screen, click on the button fullscreen or choose View > enter full screen mode. Beginning with OS X El Capitan, you can also use the screen display shared and videos to Apple TV from QuickTime Player.


    QuickTime Player can record a movie from your camera or record the screen of your iPhone, iPad or iPod touch. It can also record audio , microphone or recording of the screen of your Mac.

    Record a movie

    Video recording works with your built-in camera and many external cameras. If you use OS X Yosemite or later, you can also record the screen of any device iOS (iPhone, iPad, iPod touch with a port of Lightning) and the iOS 8 or a later version.

    1. Choose file > new movie recording.
    2. To change the recording settings, click the arrow next to the record button. Then choose your camera or device iOS, a microphone and recording quality.

    3. To monitor the audio while it is registered, use the volume slider.
    4. Click on the record button to start recording. Click to stop recording.

    Record audio only

    Audio works with your built-in microphone, external microphone or other audio device compatible Core Audio.

    1. Choose file > new Audio recording.
    2. To change the recording settings, click the arrow next to the record button. Then choose the quality of your microphone and recording.
    3. To monitor the audio while it is registered, use the volume slider.
    4. Click on the record button to start recording. Click to stop recording.

    Save your screen

    Registration form creates a film of all or part of your Mac screen. To save the screen of your iPhone, iPad or iPod touch, use the video recording function .

    1. Choose file > new registration screen.
    2. To change the recording settings, click the arrow next to the record button. If you do not want record a voice or other audio, choose None as your microphone. If you want to display a black circle for each click on the screen, choose display mouse clicks in the record.
    3. To monitor the audio while it is registered, use the volume slider.
    4. To start recording, click the Record button , and then click anywhere on the screen to start recording of the entire screen. Or drag to select an area to save, and then click the Start Recording button in this area.
    5. To stop recording, click the Stop button in the menu bar, or press command-control-Esc (Escape).


    QuickTime Player offers several options for editing your film, including cut, divide, cut/copy/paste/deleteand flip/rotation.


    Use the TRIM function to remove the unwanted your movie parts.

    1. Choose Edition > cut. Yellow bar appears, with handles at each end.

    2. Drag the handles to select the part to keep. You can also follow these actions:
      • Click the Play button to play the selected part.
      • Move quickly in the article selected by dragging two fingers on your trackpad, scroll with your mouse, or dragging the cutter bar.
      • Choose View > show Audio track to identify quiet sections of the film.
    3. Click on cut. All the video and audio outside cutter bar are removed. To cancel the trim, choose Edition > cancel Trim.


    Use the split function to split your movie into several sections that can be manipulated further.

    1. To the point in the script where you want to split, and then choose the command Edition > Clip from Split.

  • From there, you can take several actions:
    • Drag an item before or after another clip.
    • Move a clip by hitting to swipe with two fingers on your trackpad or scrolling with the mouse. At any point in the timeline panel, you can choose edition > Split Clip split clip selected.
    • Choose View > Trim to cut the clip selected.
    • Choose View > show Audio track to identify quiet sections of the clip.
    • Select an item and choose other editing in the Edit menu commands, such as cut, copy, paste, and delete.
    • Click the play button to play all clips.
  • Click done. To review your clips, choose View > show Clips. To cancel your splits, choose Edition > cancel Split Clip.
  • Cut, copy, paste, delete

    Use cut them, copy, paste them, and remove commands from the Edit menu, when you change to split clips. If you paste an element into another film, you don't have to be changes to clips in this movie: just go to any point in the timeline of the other movie, then paste the clip.

    To quickly join films together end-to-end, open the first film, choose the command Edition > Add Clip at the end, and then select the other movie in the file dialog box.

    Flip, turn

    Use the flip and rotate commands in the Edit menu when you watch a movie or a change in split clips. These commands turn or rotate the whole movie or clip.


    After recording your movie, you can share it by email, Messages, AirDrop, YouTube and other methods:

    • Open the file in QuickTime Player and choose file > share.
    • Or open the file in QuickTime Player and then click on share in the playback controls.
    • Or Ctrl-click the file in the Finder, and then choose sharing from the context menu.

    To learn more

    For more information, open QuickTime Player and choose Help > QuickTime Player Help.

    Last modified: October 19, 2015

    Have a great day!

Maybe you are looking for

  • Restart after a Stop error blue screen

    I got a blue screen on my laptop Toshiba Satellite 5200 Series stop error. I could point out here, in its entirety, if that would be helpful. However, he begins by telling me to restart the machine, but the power button / stop device is not allowing

  • When I change albums on my site of Porta Firefox does not update the site well as do other browsers.

    I have a site of Porta by using 'bystander' and when I update the albums he is generally very good, but today I changed the content in 2 albums and even if they are updates on other browsers, the changes are not displayed in my Firefox. I deleted his

  • Malicious software removal tool?

    I have the malicious software removal tool? installed ANAD get all the update so how can I use this tool that I don't see anywhere to activate it at all


    Running unix on a poweredge 2800 server - after a reboot to cold system loses date and other settings in the bios - I go into bios reset date and put the info on the disks scsi and everything works fine - what is the bios battery? Bill

  • interested in selling items from sony

    Hello my name is Clinton Bryant, I'm owner of CB-three in columbus ohio and im intrested in selling sony, how can I do so that