macOS Sierra hangs after startup

Similar Questions

• My Disk Defragmenter Hangs After startup

  My Disk Defragmenter Hangs After startup.  I tried to use the microsoft fix it Center automatic troobleshooter for the maintenance of the system determine the cause and got an error code 0 x 80040154.  He only "worked" on windows update and the update to fix issue still exists.  I'm trying to find out what means error 0 x 80040154 and how to solve the problem.

  Hope that gives you enough information.

  Hello

  (1) operating system do you work?

  (2) which Fix - it applied?

  (3) what is the exact full error message?

  Try the following methods and check the status of the issue.

  Method 1:

  Run a scan of the file system checker and check if it helps.

  http://support.Microsoft.com/kb/929833

  Method 2:

  Check a drive for errors.

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  NOTE: This task might cause loss of data on your computer. It is recommended that you back up all data and files before performing this.

• hangs after startup

  Dell Studio laptop computer with Windows Vista Home Premium.  Whenever I bootup, & it gets the main office, the computer hangs after about 1 minute.  If I log in safe mode it freezes after about 3 minutes.  And if I connect normally or in safe mode the box PROPERTIES of the SYSTEM (the one w/computer name, hardware, advanced, remote tabs) always appears. Help please.

  Hello

  Run diagnostic Dell builtin software:

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=266787

  And if that gives you advice on what is the problem, contact Dell or you could ask their Support Forums:

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• Hangs after startup (10-15 minutes), after update to Sierra

  After the upgrade to Mac OS sierra, every time when I start my MacBook Pro (retina, 15 inch, mid-2015). After the OS boot completed, my MacBook freezes around 10-15 minutes (can not do anything). But after that BONE back to normal, everything seems Ok (functions does not work correctly).

  Can someone tell how to fix this?

  Check your connection points in System preferences - users and groups - login items. And also check the CPU usage in activity monitor.

• Photoshop cc 2014 hangs after startup

  Retina pro Mac Book 2014, osx 10.9.5, creative cloud for the team;

  (1) launch Photoshop cc 2014

  (2) Photoshop CRASHES (cannot open or work or save images)

  (3) "application not nice."

  (4) creating a new account on mac; Photoshop works in the new account;

  (5) in order to work with my classic account, what can I do to fix this? Is it a good idea to software disinstall/reinstall?

  Thank you

  Command: Photoshop

  Path: / Applications/Adobe Photoshop 2014/Adobe Photoshop 2014.app/Contents/MacOS/Adobe Photoshop 2014 CC CC CC

  Version: 15.2.2 (15.2.2.310)

  Parent: launchd [143]

  PID: 793

  Event: hang

  Duration: 1.27 s (it was insensitive for 14 seconds before the sampling process)

  Steps: 13 (sampling of 100 ms interval)

  Photoshop is busy doing something - it looks like he's probably trying to restore some of the police.

  Try disabling the font previews in Photoshop, then leave then to restart.

• AE CC 2014.2 hangs AFTER startup - crash accident MSVCR110.dll module

  Since yesterday morning (Wednesday 4 Feb 15) AE CC 2014.2 hangs shortly after it starts.

  Projects can be opened and images that may be imported or played inside a mockup, but a few seconds explore warns of the same lack of accident every time.

  Ideas, ideas or solutions would be greatly appreciated in this time - Jonathan S.

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: AfterFX.exe

  Application version: 13.2.0.49

  Application timestamp: 54816501

  Fault Module name: MSVCR110.dll

  Fault Module Version: 11.0.51106.1

  Timestamp of Module error: 5098826e

  Exception code: 40000015

  Exception offset: 00000000000740da

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 2057

  Additional information 1: 3b7c

  More information 2: 3b7c1a01106e59da7831bf551db78835

  Additional information 3: 428d

  Additional information 4: 428dabe23420e869f79bdc2d71421a26

  Running 64 bit Windows 7 on a CPU E5 - 2665 HPZ820 2.4 GHz (x 2) 128 GB of RAM (95 GB reserved for After Effects)

  Have you installed any other software? An updated driver? If so, you may need to reinstall AE so the correct versions of MSVC libraries installed or you will have to undo everything you did change. Also check your cache settings, maybe the cache is full or damaged and causing these crashes whenever you try to add more pictures to the top of the pile.

  Mylenium

• Terminal Windows 2008R2, 17.01 Firefox server hangs after startup for all users

  We have 2 servers RDP with Windows Server 2008R2, we recently updated firefox since version 9 version 17.01 because of flash plugin crashes. After that the firefox update blocks very regular for each user.

  After you open a site, we see it for a fraction of a second, then
  The error message depending on whether we get:
  "Firefox has stopped working".

  This is the case for most sites, some sites work however, as www.google.nl
  Sites that do not work for example:
  www.YouTube.com
  www.nu.nl
  www.UNOX.nl

  I thought it would be flash again.
  What we tried:
  -Firefox to uninstall and reinstall again.
  -Uninstall Flash player and install it again.
  -Disabled all add-ons
  -tried save mode
  -tried this one: https://support.mozilla.org/en-US/questions/922902?esab=a & as = aaq
  -tried this: https://support.mozilla.org/en-US/kb/profile-manager-create-and-remove-firefox-profiles?redirectlocale=en-US & redirectslug = Managing profiles #os = win7 & browser = fx17
  -Firefox default factory reset
  -Old version 16.02 (after uninstalling 17.01)

  I'm a little short on options.
  Any help would be much appreciated!

  Kind regards

  Joost

  Luckily a colleague of me figured it out!

  It turns out that the cause of the firefox crashes came from a security layer installed with the ESC Secure Layer that uses an application called Manager of funds
  The dll that the accident was referring is used by this program. Find that out was the hell google is now filled with the nonsense of 'check your PC for malware' stupid on a search for the dll.

  After removing the application, FF works fine again without crashing.
  So it seems a compatibility issue with Firefox and Money Manager

  Thanks for the help and I hope that someone in the future will have something on the solution we have found.

  Cheers!

  Joost

• Tecra 8100 hangs after startup

  Hello
  My Tecra 8100 has the same problem as described some time ago: the memory locations of MB were broken and doesn't have a connection properly. Even when I put paper or anything else between the cover and the memory module, it did not work and often my laptop has not yet started.

  I bought the new MB and now the laptop still start (I can see BIOS etc.) BUT crashes after Windows XP logo with notice: windows cannot start because the pci.sys file is damaged... The names of 'corrupt' are different, not only from pci.sys.

  When I portable computer boot from CD Win (to save the system) it blocks (crashes after 2-3 minutes). I tried to boot from Ultimate Boot Cd to detect the problem, but I can't do anything - always crashes after a short period of time - never start to run tests or Tools CD.

  I think that there is a problem of memory - I have 2 modules Kingston KTT-SO100/256, I tried to place them in different locations, together and alone, but nothing changes.
  These modules have worked with my old MB all the time.

  Any ideas?
  Radek

  I read on other forums that this error can appear if the modules of memory are corrupt or not compatible or the memory on the motherboard slot is faulty.

  Well, you have replaced the Board but do you use 100% identical to that of first?
  Perhaps modules of memory are not compatible with the new Board of Directors.

  "I found this Microsoft document that describes the Pci.sys is missing or corrupt" Error Message:
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;319136&FR=1&PA=1&SD=HSCH

• Satellite M45 hangs after startup

  Hi people,

  I got by Satellite M45 and it's almost 3 years, I use it. Now he started to gel after starting. So I formatted using the recovery DVDs, even now he kick survey and if I click on the start menu it freezes.

  Someone has this kind of situation? Is this hard drive problem? What would be the best solution to do this, change the HD, RAM?.

  Thanks in advance.

  Hello

  > Is this hard drive problem? What would be the best solution to do this, change the HD, RAM?.

  You must understand that no one will be able to say exactly what's wrong.
  Several tests are needed to find the fault.

  If you reinstalled the operating system on the HARD drive and then I n t think that the HARD drive would be malfunctions.
  I had a similar problem on my 6 year old laptop. Laptop computer frisotté after 2 min.
  After a long investigation, I discovered that one of the memory slots would be defective, because the two modules worked correctly in another location.

  Of course, in your case, it could be a failure of memory but it's only a suggestion or suspicion. You know

• Photoshop CC 2015 trial hangs after startup

  Hello. I had just downloaded a trial version of photoshop. I try to re - open every time it crashes after opening. I tried signing out creative cloud and signature in and uninstall/re-installing but nothing helps, it crashes after opening. I use this on my windows 7 Home premium desktop.

  It seems that your AMD display card drivers cause a Photoshop crashing.

  Please update the graphics to the Web site of the manufacturer driver

  Download drivers

  I hope this helps.

  ~ UL

• Illustrator CC hangs after startup

  I saw that questioned more than times that I can count and I tried more bugs than that. I saw not a single solution for this on the forums.

  In any case, my Adobe Illustrator CC closes / crashes just after opening. I have to display the dialog box indicating what is new and it will be is not broken until after I hit very well, then in a few seconds, it crashes.

  I have Windows 8.1, all needed fonts, I tried to remove my preferences and reinstall several times.

  I contacted Adobe and they said maybe it's a registry error and that they'll fix it for more than $200 so I don't not done because it is absurd and I don't think it is a mistake to register. I have Photoshop CC and it works perfectly.

  I'd really like to hear from anyone who wants to help, it's really frustrating.

  Thanks in advance

  I finally fixed it!

  For anyone else having this problem this is how I fix

  C:\Program Files (x 86) \Common Files\Adobe\SLCache

  C:\ProgramData\Adobe\SLStore

  Find these two folders and move SLStore and SLCache folders to another location. Illustrator automatically generates them and then it worked!

  * C:\ProgramData is hidden, you should see and exploit the hidden files.

• Satellite A500 - hangs after startup

  My A500 is about 18 months old and just recently, it has started to freeze within 5 minutes of commissioning. It runs in safe mode for as long as I want. I run PC - Doctor drive external HARD in this mode and found no problem.

  Next, I'd like to try is restore back to the factory of the hidden partition settings, I know how to do. Before I do that I have a few questions please.

  1A everyone has had this problem and solved?
  2. is my computer likely to freeze during the re-instillation of the system and get stuck in some kind of loop to instillation or turn into a brick.

  Any comments would be much appreciated.

  Thank you

  Running Windows 7 32bit.* *.

  Hey,.

  > It runs in safe mode for as long as I want.
  That would mean he s a software problem or driver and reinstalling Windows using disk HARD recovery would help to get rid of it.

  No doubt someone else has solved the problem, but don t forget that different people using different software/drivers, so no one can tell you exactly what is causing the problem. With the installation of recovery you do nothing wrong because it will restore the settings prétestées from Toshiba.

  An accurate description on the recovery of HARD drive, you can find here:
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

• The computer hangs after startup - operating in Mode safe

  "My computer doesn't meet not what whatsoever once home page is pulled to the top. However, it works fine in safe mode. Please help. »

  Alternatively, you can remove your phone number. It is never wise to post personal information on a public forum; you might be contact by people who aren't very nice.

  Please start with the basics and the post back with results of additional assistance. Do not skip the preparatory work.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). If possible, have all your data backed up before taking the machine into a shop.

  MS - MVP - Elephant Boy computers - don't panic!

• KKKKK hangs after startup

  Hello everyone, I don't know what happened, but last night when I was using whatsapp by Karl, my pc stops suddenly, screen not closed or anything, it just went off the coast, I turned back on it and then when I tried to start kkkkk, it loads for 5-10 sec and then automatically closes, I checked it in the Task Manager and when I run the application , it is the process called HD - Frontend.exe would take approximately 50 000 KB and more RAM and then the kkkkk window closes and the HD... Process ends also. I restarted kkkkk so many times, but the same thing happens. Please help as soon as possible.
  My PC Specs:
  Windows 7 Home Basic
  4 GB OF RAM
  NVIDIA Geforce 310, (update v. 331.56) not updated

  Please help me and please don't say I reinstall kkkkk, because I run on it, and then if re-installed, all my cats Whatsapp whatsapp and everything would go, and in the new facility, the whatsapp register my number againit wouldn't say that it's already register. Help advocacy as soon as POSSIBLE. Thank you.

  AP

  Since this isn't an OS problem but rather a question of kkkkk.  You must contact the (or whatapp) for support.  Basically, they know their best products.

  The only thing we can really tell you is to re - install.

• PSE13 hangs after startup

  I use PSE13 on a labtop Windows 10 and have the following problem:

  recently, I tried to import photos from a USB but the stick crashed (dead) so I couldn't complete the import. Of course, I removed the stick and restarted PSE13.

  When you restart PSE13 recognizes that an import of foto has been previously interrupted and try to read files. I wonder if these photos should appear once the import is complete. But as soon as I continue the program (by clicking Yes or no that makes no difference) PSE13 matter a few photos and then crashes (closed program). I repeated several times and it always blocks read the same image.

  The main problem is that I start the import procedure so the crahses of program until I can do something else. In this way, I'm not able to do anything with PSE13 - I'm cought in an infinite loop :-(

  Can you help me?

  Thank you very much

  Wolfgang

  I found the fotos which makes the termination of the program and deleted. Now PSE13 starts up normally and I can use it again.

  Problem solved :-)