macOS Sierra no longer supports monitors ultra wide angle?

Similar Questions

• 29 "monitor ultra-wide angle and a Macbook of 2015?

  Someone tried to drive an Ultrawide 29 "monitor with the Macbook 2015 12" (more precisely the m3). I have a Dell U2913WM monitor and I was using the multipart Minix Neo C USB - C adapter, which claims to support up to 4K. However, when I plug all together, the screen flickers and it seems like the laptop is fighting for a signal on the display and then give up every two seconds or more. As the OS X desktop will be displayed on the screen for a second, and then it is up to the laptop. The mouse is difficult to use.

  The only thing I could think tried the official Apple adapter? Y at - it all the parameters that I missed? Nothing else to try?

  Same thing here. Got a Mo (Early 2015) and a LG 21:9 screen. I use the hub Hootoo Shuttle which also supports 4K HDMI. But when I plug it in, nothing happens. Before this, on my MBP of 2009 HDMI wasn't too and I had to use a Displayport cable to make it work. I doubt if the Macbook can handle resolutions 21:9

• Samsung Ultra wide angle (S29E790C) Compatibiblity

  Hello

  I have a laptop USPHL-LT-1238RG and wishes to buy a monitor Samsung ultra wide, specifically the model S29E790C.  My laptop is useful with this model?  Would there be problems?

  Best regards

  Samantha

  DisplayPort is a specific type of interface for the transport of signals from a computer to a monitor. I know that this monitor has a Displayport connection for the input signal. The reason why I need to know the model of the laptop is to see if it supports Displayport out.

  The cable looks like this:

  

  https://en.Wikipedia.org/wiki/DisplayPort

  And your laptop has a displayport on it. See page 2 item 2 of the plug here:

  http://WWW8.HP.com/h20195/v2/GetPDF.aspx/c04472796.PDF

  Samsung also provides the software for monitors ultra wide angle that is useful.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Software monitors ultra-wide desperately need to change!

  I just bought 2 x U2913WM. I must say they are very good (I need a lot of space on the screen for my work and I used 3 monitors to cover what I need, the 2 ultra-wides do same work as the 3 regular monitors for me). I must say that Dell has done a very good job by jumping into this trend. I'm almost happy. There is however a small problem and I hope that Dell will fix it up soon (given that it's very new range of monitors and hard to get the stock to the United Kingdom-, I waited 2 weeks to receive). The question is in ease of use. Obviously a normal person cannot use such a wide screen as a regular monitor (most of the time, for me it is 99% of the time) - when you need a few windows on the same screen and you would not bother to try adjust sizes whenever you jump a high window - to keep do not overlap and beautiful and tidy... Right... This is the display Dell Manager... It was a great job for you help organize your desktop. You can pin your windows in small spaces of customizable virtual display... Which is what is needed! However, there is a hiccup I want Dell to resolve as soon as possible... The problem is that whenever you take a window of the header - display Manager starts working and there is no way to avoid once the window is caught. So - you can not move a window without being pinned as soon as you release (maximized in the closest of the virtual screen). It's _very_ counterproductive because there are a lot of small windows that must remain the size they are, and if you want to move them they must leave with this size... I would like that someone from Dell support to spread my comments to team development as soon as possible. I don't know that this can be resolved very easily (for example if you add a keyboard stokes in this image, you can simply have for example Ctrt + Window_Grab to mean - do not pin the window etc.). I use Windows 7 x 64. Thank you

  maxima120

  I... whenever you take a window by the header - display Manager starts to work and there is no way to avoid once the window is caught...

  Now try the SHIFT key while dragging the window.

• macOS Sierra does not support some MIDI controllers

  Because I downloaded the new macOS sierra, my midi keyboard no longer works. The midi controller is no longer recognized by Logic Pro X.

  Thanks in advance!

  But it is recognized by the computer, Garageband sees the keyboard?

  Go to utilities/Audio-MIDI settings...

  With the keyboard plugged in, look on the MIDI tab, everything is listed.

  After update for Sierra have you disconnected the keyboard, stop and restart the computer, allow to settle and then reconnect the keyboard.

• iMac 5K with ultra wide screen LG

  Hello

  I just ordered a 5K iMac and I currently have an LG monitor ultra wide 34UC87-C I had to connect to the Mac. My question is which compatible cable should I buy given the resolution 3440 x 1440 p of the external monitor. It is not a thunderbolt port, but a display port & 2 HDMI ports.

  I saw a few cables as poster thunderbolt or HDMI port for love at first sight available on Amazon, but I'm not sure that one to choose or provide you with the best image quality.

  Thank you in advance for the clarification.

  http://www.LG.com/us/monitors/LG-34UC87C-B-UltraWide-led-monitor

  You want to use a Mini DisplayPort Connector Display Port cable.

  to see a few examples > http://www.amazon.com/s/?ie=UTF8 & keywords = thunderbolt + to + displayport

• Would be - a lens wide angle work here?

  Hello world! This is my first post and excuse that my ignorance, but I need to see if you guys could help me with something. I just bought a T3i and I have no photography or video production experience but I am really interested in getting my feet wet in these two areas.

  But anyway, I have a tripod and want to shoot my brother and I play tennis. I have always created the tripod at a considerable distance, but if we put in place in the Middle we can only film one side of the Court. A goal wide angle would be able to record both sides of the Court at the same time?

  Watch online examples of photos showing the angle of view.

  You could get a lens fisheye lens 180 degrees and sit right at the net but all objects other than those at the edge of the lens will appear quite small. Fisheye lenses also have effects strong enough curvature. In addition, there are two types of fisheye lenses... a guy makes a full frame, rectilinear image, while the other type restores a round image.

  While appearsimilar focal fisheye lens ultrawide, any given focal length a fisheye gives actually wider than a non-fisheye AOV. Canon now offers a for example 8-15mm fisheye zoom. But since it is designed for cameras full frame, it will be not too wide on your device at sensor crop (I don't have exact specifications for this on a crop sensor camera, only full frame specifications are listed). Tokina offers a zoom 10-17mm fisheye specifically designed for crop sensor cameras, and as such, it can make 180 degrees angle of view of your camera.

  A non-ultra wide angle fisheye will have less curvature distortion, but will always be some extremes and will be also less wide angle of view. For example, the EF-S 10-22mm lens is the widest available Canon, objective: give the AOV 107 in the setting of 10 mm. The wider non-fisheye lens made by any person for the use on your camera is the Sigma 8-16mm, which gives it a degree of 114 AOV is wider. With these lenses ultrawide perspective distortion even exaggerate perspective, more distant objects look very small compared to relatives... even if it is not as extreme as it is with a fisheye lens.

  If it's a one-shot deal and calls fisheye for you, because a fisheye is a rather specialized lens and you can watch in the rental of a lens for this purpose. Ultra wide-angle non-fisheye as the Canon 10-22 mm is often more widely useful, so maybe something you would find much more use for long term and want to buy as rent.

  ***********
  Alan Myers

  San Jose, California, USA.
  «Market softly and carry a great lens.»
  MATERIAL: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
  FLICKR & REPROGRAPHY

• 21:9 (2560 x 1080) ultra wide screen Macbook Air does not work after macOS Sierra

  I have a problem with my LG 29UM58.-p.

  After the installation of macOS Sierra Switchresx (4.5.3) isn't my custom resolution 2560 x 1080 more. I already tried to uninstall Switchresx and took new custom resolutions, but it did not help... First of all, it did not save my custom resolutions and then he said no "installed" or "active - invalid? Also, someone said if you made an additional account on your mac and then define custom resolutions, you can then use it in your normal macaccount, but he also didn't work...

  I tried (almost) everything... before the update of the software it was working fine.  Oh and also I use HDMI to mini displayport.

  Could someone help me out here?

  Thank you very much!

  Hey man, same here. That I'm going through exactly the same thing here. I have a MacBook Air from 2013 and just bought the exact same display. I'm on MacOS Sierra.

• monitors external macOS Sierra + MacBook Pro 15 "+ 3 = gel

  This facility has worked with El Capitan (2 Thunderbolts-> DisplayPort + HDMI 1 = 3 monitors).

  Update of macOS Sierra - as soon as I connect a 3rd monitor (any order) - it freezes the whole system. Two monitors works very well

  If I boot with three monitors connected, the screen goes black and I have to power down manually.

  My system: MacBook Pro (retina, 15 inches, end of 2013)

  Same problem reported by other users on SuperUser.com.

  Someone else had a similar problem? Everyone is running the same configuration without problem? All known resolution?

  There has been a lot of complaints of not being able to use the resolution full screen on 3 monitors of party, who has worked in El Capitan.  I've seen all the problems such as you report.

  However, I guess the graphics driver passed under changes in the Sierra, and it is possible, that this is yet another side effect.

  You may very well be a bug, so that developers know that there is still another problem with the graphics driver Sierra

  BugReporter (account free ADC (Apple Developer Connection) required for BugReporter)

  <http://bugreporter.apple.com>

  Anyone can get a free ADC account at:

• Apple dropped support of Windows 8 in macOS Sierra?

  So I upgraded my MacBook to macOS Sierra and I noticed something different in the BootCamp Assistant.

  As the official macOS page Sierra said, the new BootCamp installations require Windows 8 and 10.

  But when I opened the BootCamp Assistant, he made only 10 Windows or USB later.

  

  So what is the significance of this? Fall of Apple already supported for Windows 8?

  W8.1 must always be supported. If you point to W8.1 ISO, you get error messages?

• support of macOS Sierra.app tool

  When you try to upgrade to Sierra I get a message from macOS sierra.app tries to add a new tool for assistance.  What is this support tool and is it safe?  I know that Java said something along the same line, and it is your browser hijacking.

  Hello

  Find out how to update for Sierra here > http://www.apple.com/macos/how-to-upgrade/

• HP Photosmart 7525: Scanning under MacOS Sierra is no longer working.

  Recently upgraded to MacOS Sierra (MacOS 10.12).  Since then, my HP Photosmart 7525 is no longer allow me to save the scans to the computer.  The "Save" button is gray and impossible to be clicked.  He'll copy, print and scan documents, I just can no longer save to my computer.

  When I enter the HP utility > settings > scan settings > scan to the computer, the software scans my system, then gives me an error message that says:

  "Scan of the computer can not be activated.

  The HP software required for the Scan of the computer could not be located on this computer. Please download and install the latest HP recommended software for your device to http://www.hp.com/supportand then try again. »

  I completely uninstalled the old driver software (which says that HP should run on any Mac OS after 10.6) and reinstalled the latest drivers that it is compatible for the 10.11 and later.  I always get the same answer.  Printer will print, will copy, will scan, but not save to the computer.

  Yes, I already rebooted one device at a time, and Yes, I disconnected and reconnected all devices in separately.

  What can I try next...?

  Hey there.

  EASY SCAN can be installed, use 1.6.0 - works well with SIERRA.

  Kind regards.

• HP Photosmart AIO 7520: Scanning under MacOS Sierra is no longer working.

  Recently upgraded to MacOS Sierra (MacOS 10.12).  Since then, my Photosmart HP 7520 is no longer will allow me to scan or save the scans to the computer.  The "Save" button is grayed out and cannot...  HP must send the updated drivers that resolve the problem very soon.

  Trash the older Scan Utility as he said? Who did it for me. Maybe try to restart after that? And restart the printer too?

• Still is not supported under macOS Sierra!

  Hey,.

  I am trying to import goods of PrPro in CS5.5 Encore and also tried CS6, but I always get this message:

  

  And this happened right after that I improve my system to macOS Sierra.

  Any suggestion? I appreciate your help.

  Yes, I meant dynamic link. and I found it is that prpro CC doesn't support dynamic link to Encore CS6.

  Premiere Pro CC are not dynamic links

  So, I followed the steps described in the link above or just go back with PrPro CS5.5/CS6 or maybe just use Final Cut Pro?

  So bad that Adobe do not support its expensive products.

• macOS Sierra takes so long to download, my computer turns off and the current download is lost.  How can I configure my computer to stay - we more?

  How to set my Imac on stay - we more?  (When downloading macOS Sierra)

  Go to System Preferences and click energy saver.  Slide the computer sleep forever.  Reset you settings after the update is complete.