MacOS Sierra of misreporting of space available?

Similar Questions

• My hp LaserJet 1022nw fails to analyze the download of the printer driver after that macOS Sierra upgraded.

  After switching to macOS Sierra, my printer (hp LaserJet 1022nw) WiFi does not print work orders, even if the printer seems to be to receive the order of work and how to complete it in the work queue.  Connect the printer to my MacBook Pro via USB, I am able to print without problem.  Other computers on the network continue to be able to print wireless.  When I connect via USB and try to scan a updated driver, download cause analysis a software fault message.  Any ideas on how I could proceed to continue to connect and use my printer wireless with the new OS?  The 1022nw is detectable as a printer available (wi - fi) and can normally be added to the list of printers, but doesn't have the print queue even thought that they seem to have been dealt with, and then disappear from the queue.

  Open System Preferences > Printers and Scanners and select the print tab.

  Then the right or control click on the printer on the left then click: reset the printing system

• macOS Sierra alternative text

  I upgraded to macOS Sierra of El Capitan, at the end of September and now my list of replace text does not appear in system preferences > keyboard > text.  The list is available and works on my iPhone 7 (iOS 10.0.2).

  I have repopulated actually manually list on my Mac yesterday and today, the list is completely empty (once again, completely intact on my iPhone).

  I tried to switch and system preferences > iCloud > iCloud drive > Options > Preferences.app system on my Mac without success but also by ensuring that this edition > Substitutions > click on the replacement text 'on' in applications where the replacement text is frequently used (Safari, Messages, etc.).

  For any help or suggestion would be greatly appreciated!

  macOS Sierra

  Version 10.12

  MacBook Pro (13-inch, mid-2012)

  2.5 GHz intel Core i5

  16GB 1600 MHz DDR3

  399 GB of available storage

  Next time you go to the trouble to put them manually, export them by following the instructions in

  How to export and import substitutions of text on your Mac - Apple Support , then you can at least re - import them, rather than the tedious process of re - to manually enter their new.

• How to scan a document multi-page with preview in macOS Sierra with Scanner and printer Dell network?

  Hello, I know that macOS Sierra had a big problem with PDF / scanning due to an update to the pdf engine. Here we have Dell printers / scanners Dell C3765dnf Color MFP. We usually scan with Preview app (import of the device). But with macOS Sierra, the scanner scans all pages but the first page is available after the scanning process. Maybe can someone help?

  Have you tried scanning with Capture of Image?

• How to remove the cache of mail under macOS Sierra?

  I was not able to clear my cache of mail to update the web images. I tried to empty as I did in Mavericks and it does not work. In Mavericks, I rarely had even do like everything. In the Sierra I can't erase?

  Hello

  There is a very useful tool built into macOS Sierra for free space, including mail cache: sierra.html http://www.iphonehacks.com/2016/09/analyze-storage-get-rid-unwanted-files-macos-

• Controls horizontal volumen in macOs Sierra

  Hello

  With the new volume control available under macOs Sierra (horizontal slider) now you can't click and drag the volume control that I used to do! Was perhaps than me, but I used this technique (click and drag) a lot of time for speed and simplicity.

  If it's a matter of UI design, I think it's pretty easy to keep the cursor in the vertical volume with a list of outputs available on the right side like this:

  

  So please! go back to the vertical!

  FWIW. the horizontal slider works for me.

  

  I doubt that the problem you are experiencing has nothing to do with the orientation of the slider.

  It is a technical user support site, Apple isn't here. You can let them know here...

  http://www.Apple.com/feedback/

• Reset home folder permissions and the default ACL on macOS Sierra?

  A tool that I've used in the past to troubleshooting doesn't seem to be available in macOS Sierra.

  There was a procedure in el captain to reset the permissions of file and ACLs in start in recovery mode, by running the command terminal, resetpassword.  This command pulls up a GUI in Sierra as el cap but the "reset the user permissions and ACLs" option is no longer there.

  This article describes the procedure to el captain

  http://appletoolbox.com/2016/07/fix-corrupt-user-accounts-MacOS/#For_El_Capitan _ andmacOS

  Is there another way to reset the permissions of the user and the default ACLs on macOS Sierra?

  If you are looking for in the forums on the topic and limit to messages by Linc Davis, he posted a script that will reset everything.

• macOS Sierra - press and hold the power button to enter the mode 'sleep'

  I recently updated my MacBook Air (13 inch, early 2015) model of El Capitan macOS Sierra 10.12. Before the update, hold down the power button / stop for 2-3 seconds, put the machine in standby mode. It does not properly after the update. Release the power button to switch to sleep mode works only once after each time you start the machine.

  I know he has an option to set the mode of sleep using Ctrl + button / stop and by selecting one of three options to restart, sleep and Shutdown, but who needs 3 more click click and is not fast. Also, independently of any application that is open, pressing the button walk / stop worked fine before the update, but now I need to be on the desktop even do Ctrl + Power button work.

  All patches available for it? Miss me the old way of put my Mac to sleep I do not remember if I did some tweak in my Mac, or was it a default feature...

  Greetings jainam2209,

  Thank you for using communities of Apple Support. It seems you want to put the Mac to sleep, but it does not always work.
  I would recommend read you these articles, the first article explains the ways that macOS Sierra is supposed to go to sleep.
  The second article can help if the computer won't sleep when you're trying to sleep.
  

  macOS Sierra: put your Mac to sleep

  macOS Sierra: If your Mac won't go or stay asleep

  Take care.

• Sierra reports "not enough space".

  Hello

  Sierra reperted lack of space, where 112 gig were available, and then goes in a reboot cycle.

  Wait for 2 hours and it is only three quarters facts.

  I can't break the cycle, even if I invoke the MODE without FAILURE, or Stertup Manager or a CD installation.

  Gray screen, logo naked apple for 2 hours.

  Help please.

  Right out of the above typo...

  My problem has been postponed.

  9 hours and several failures, usually time in nanoseconds, and then stop, I managed to break the cycle and not the iMac.

  Tried to start in safe mode, CD Diagnostic etc etc, which all failed.  Then scrape the barrel of my brain, I tried...

  A solution of 4 keys to start

  Command-Option-P-R reset the NVRAM. Release the buttons after hearing the sound of starting again.

  A coupla reboots and no Sierra, but an iMac for work.

• macOS Sierra download stops with the error to 2.15 GB every time

  I'm currently under OS X El Capitan 10.11.6 and I try to download and install macOS Sierra.  I tried several times and whenever the download stops at 2.15 GB with the message macOS that Sierra could not download use the purchases page to try again.  When I go to the shopping page I see a category for other purchases that lists the Sierra macOS.  However, the button has the text in red next to it indicating that an error has occurred and the button has no text.  By clicking the button does nothing.  I restart and remove partial downloading of applications to try again.  See screenshot below.

  

  I have enough free space on my hard drive.

  

  Here are the details of the machine.

  

  I tried using wired and wireless network card and get the same result be it.  This could be the cause of this problem?

  Same thing happens for me only that I had as much as 4.22 GB.  I've been downloading since yesterday night, market.  It started quickly with about 30-40 minutes for the download, then it begins to rise.  He stood as far as 17 to 18 hours.  Now it gives me this error failed.  It seems to be widespread, however.

• MacOS Sierra could not download

  I tried more than a dozen times, download the installation program from the App Store for macOS Sierra.  It fails every time with a message that "sierra macos download failed. Use the shopping page to try again "."  The download speeds are very good, and in 20 minutes, it will exactly Download 4.23 4.77 GB.  Then it will stall at 4.23 GB and indicate 'calculate '.  Stalls at 4.23 GB every time.  I have a lot of space (+ 134 GB), uses the latest version of El Capitan on mid 2010 macbook pro, 8 GB of memory.  Ideas for this problem?

  I added the Debug menu to the appstore and tried to reset the application as people wrote.  Nothing seems to work.

  Along with your MacOS download, try to download any free app at the same time before dropping out.

• Downloaded the new MacOS Sierra, but cannot install it

  Hello!

  The morning I downloaded the new OS Sierra from AppStore. The download is complete, I started to install. Amidst this, a message appeared and he said I don't have enough hard disk space. Well, fortunately I managed to start the previous operating system and everything works normally.

  The problem is the following- I always update the operating system more recent. I open AppStore, OS Sierra search and it says downloaded. But I can not start the installation process in any case .

  In the finder, I noticed that there are new 'macOS Install Data' folder under Macintosh HD. Should I delete this, so I can re-download from AppStore new OS and then install? Or how can I start the installation again process?

  Thank you!

  Look in your Applications folder for "Install macOS Sierra." This is where the installer is placed when it is downloaded. It is normally deleted once the update is complete, but may still be there.

  I would also say that you look through the problems on this forum other users have experienced so you can decide if you want to join them.

• Language on macOS Sierra switch problem

  I just upgraded to macOS Sierra and I have a problem with switching languages.

  I have both English and Russian, but I just need to do the Cmd + space to more than an hour to change language and when I do, I can get the American icon in the status bar, but the language is passed to the Russia and vice versa.

  Any thoughts on how to solve this problem?

  Is this another discussion help:

  input source indicator does not

• I have an iMac 27' 2012 with macOS Sierra and Apple Watch with watch OS 3, I can use the function "Log?" in Apple Watch

  I have an iMac 27' 2012 with macOS Sierra and Apple Watch with watch OS 3, I can use the function "Log?" in Apple Watch

  Hi John 2078 Tito.

  I understand that you have updated your iMac and Apple Watch and now you're curious about unlock your iMac using your Apple Watch. I know that it is a nice feature to be able to quickly and safely unlock your computer, so I'm happy to help you.

  This feature is available on 2013 iMacs and later versions, which means that your iMac won't be compatible. You can see more info on this feature here:
  Unlock your Mac with Apple Watch - Apple Watch user's Guide

  Thank you for using communities Support from Apple. See you soon!

• macOS Sierra is a buggy and crap OS

  The worst OS that apple has ever made. Model of MacBook Pro (Early 2015) is not close properly without a hard stop, after the installation of macOS Sierra. Still, it shows a window saying that there is a problem in my MacBook and should be stopped. Where can I get the OS X El Capitan? After the installation of macOS Sierra, my MacBook has become slower than before. Could you guys please fix the BONES of crap and buggy that come out?

  Which MacBook Pro mode

  What OS version you had before?

  El Capitan is available in the section of the purchase of your Mac App Store

  You have a backup TM you can restore from?

  Can you post the error message you received?

  Open the Console application in the Finder > Applications > utilities and look for entries of the log at the time of the problem.

  Have you tried:

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204904

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x