MacPro will not connect to I-phone 6 via AirDrop WINE, Mac Pro (early 2009), OS 10.10.5. Phone is IOS 9.2.1

Similar Questions

• Why my iPhone 5s will not connect to my iMac (2011) via bluetooth?

  I have an iMac running El Capitan 2011 and I have never been able to connect my iPhone 5 s using bluetooth. I get all the way to the part where the computer sends the pairing code. When I accept the code on the phone, the computer says it connects for a fraction of a second then says she failed. Any ideas?

  If you are trying to connect for file transfer purposes, it won't work, because it is not a supported protocol.

  iOS: supported Bluetooth - Apple Support profiles

• Why my phone will not connect to my wifi

  Why my phone will not connect to my wifi

  If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network

• iPhone 7 will not connect to iTunes - request for the new version, but everything is up-to-date

  My new phone will not connect to iTunes on my computer windows laptop. It is said that it requires a newer version of iTunes but the latest version is all ready to date

  Is your "new version" iTunes 12.5.1.21? If this is not the case, your 'windows' laptop running Windows XP or Vista?

• HP 7520: HP 7520 will not connect to the wireless network

  There is some additional information to

  http://forums.Xfinity.com/T5/home-networking-router-WiFi/HP-7520-will-not-connect-to-wireless-networ...

  on this issue.

  Have several APs for a single wireless network allows the printer foolish law.  (Not a Repeater, a second AP connected to the local network with the same configuration of network for security, etc.).

  I solved this problem.  In accordance with the discussion on the link, the problem is that the printer cannot connect to a wireless network if there is greater than 1 for a wireless network (SSID) name wireless access point.

  This thread has had several useful suggestions, but what finally solved the problem, it's the second point has access to a mode where I can create a 'virtual' access point and, above all, a SSID associated.

  Note that not all access points or routers support virtual APs, but this function seems to be more common over time.  Older models is not able to do that.  However, a new access point is sometimes cheaper than a new printer.

  If you do not understand the jargon in the procedure below, I recommend that you find someone who does, then they can do it for you.

  Solution:

  1. On one of the wireless access on the network, create an a new virtual AP with a slightly different name SSID (for example < name of the network - > _1), on the same VLAN (usually VLAN 1).  You may need to put the AP in "multiple AP mode" or something similar, and then restart the AP.  All other settings (DHCP, security, mixed mode b/g/n, etc.) must be the same for the new SSID.
  2. Run the printer Wireless Setup and connect it to this new SSID
  3. Confirm that the printer can be seen by other devices on the network

  Tips:

  • Check the security is the same as the original SSID, Alternatively you can create a vector of insecurity in your network.  Do not WEP-128 when the other SSID uses WPA2 AES, for example.
  • The AP I had had several resets to make it work because of the mode and parameter changes.
  • If you connect the SSID but cannot connect to or be seen by anything on your network, check the new SSID/AP is in the same VLAN as the original.
  • Because the printer is not roaming, and the speed is not a problem for me, I used the access point that could support this solution, which is deeper and slower than my primary AP.  I have not noticed any problems.

  The printer has been reliable on the wireless now on the new SSID, 48 hours.

  I have not upgraded any software on a client of the printer (PC, Mac, phones).

  I think that it is a positive confirmation that the problem is with the implementation of the printer of the stack of network and not with the driver or client software on remote devices.  The 802.11 protocols provide for a network name (SSID) wireless with several access points using different MAC addresses.  I suggest this HP look into this as a potential bug with their network printer for the 7520 protocols stack.

• My laptop Sony VAIO with Vista will not connect and stay connected to my wireless internet.

  My laptop Sony VAIO with Vista will not connect and stay connected to my wireless internet.  All other laptops in the House are perfectly.  Internet disconnects, says local only, then reconnects constantly making internet hard work.

  Hi Tinkerbellfancolorado,

  1. When is this last work fine?
  2. Do you receive an error message or error codes?
  3. Recent changes on the computer?

  There could be several causes for this problem.

  Try starting with these methods.

  Method 1

  Step 1

  1. Open Network Diagnostics by right-clicking the network icon in the notification area, and then click diagnose and repair.
  2. Make sure that all cables are connected (for example, make sure that your modem is connected to a working jack or cable phone connection, either directly or through a router).
  3. Reset your modem and router. Remove the power cord from the modem or router, wait at least 10 seconds, then plug in the modem and/or router back.

  Step 2

  Another reason may be windows disable your network adapter to save power. Turn off the power saving option in the properties of the network (wired network only cards) card:

  1. Open network connections by clicking the Start button, clicking Control Panel, clicking network and Internet, click network and sharing Center, and then clicking manage network connections.
  2. Right-click on the connection and then click Properties. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. On the Networking tab, click Configure.
  4. On the power management tab, clear the allow the computer to turn off this device to save power option, and then click OK.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Method 2

  Temporarily disable the firewall, and check the status.

  NOTE: To re-enable the firewall after check you the status. If you are connected to the Internet or a network during the time that your /firewall antivirus software is disabled, your computer is vulnerable to attacks.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Hope that was heloful.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Bluetooth does not connect to the phone Moto G

  Bluetooth not connect to the phone of MotoGP

  How can I get there?

  Original title: bluetooth does not connect

  Hello

  Please contact Microsoft Community.

  I understand that you are unable to connect to the Bluetooth.

  I will definitely help you with this.

  1. Do you receive an error message when connecting?
  2. Are you computer connection to phone with Bluetooth or other device?

  I suggest you go through the below methods:

  Method 1: Run the hardware troubleshooter, and check if the Bluetooth works.

  Open the troubleshooter of material and devices by hitting on any fly in the right edge of the screen, quilting search (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), recording equipment and devices in the search box, type by clicking on settings and then by typing or clicking on find and fix problems with the devices. You may be prompted for an administrator password or to confirm your choice.

  Method 2: activate Bluetooth Support Service.

  Follow these steps and check if the Bluetooth support Service is started.

  (a) press the Windows key + R, type services.msc and press ENTER.

  (b) make a right click on the service named Bluetooth Support Service.

  (c) check if it is started, otherwise click Start.

  Download and install the latest Bluetooth drivers on the manufacturer's Web site.

  Method 3: To add a Bluetooth device, see the following steps:

  Once you have verified that a Bluetooth adapter is installed on your computer and the device that you want to connect with can be discovered, you can add more than compatible Bluetooth devices to your computer. Here's how:

  1. press the Windows key, it will appear on the start screen, tap Add a device, click settings, click Add a Bluetooth device

  2. click on the compatible Bluetooth device, you want to add to your computer, and then click Next. If you do not see the device you want to add, make sure that the device is turned on and discoverable. If you turned right on the device, it may take Windows several seconds to detect.

  Windows might ask you to enter a pairing code (sometimes called a PIN or pass). Most Bluetooth enabled devices had to be paired with your computer before that they can exchange information between them. To do this, they must exchange protected pairing codes. This means that only wireless devices, you authorize can connect with your computer.

  See also the link below:

  https://support.Microsoft.com/en-us/help/15290/Windows-connect-Bluetooth-device

  I hope this helps. Please post back with the State of the question and we will be happy to help you further.

• iPhone 6 will not connect to iTunes

  Hi all!

  Here's my problem: my iPhone 6 (iOS 10.0.1) does not connect to my iTunes (11.4) on my Macbook Pro (2008) 10.6.8 running. The message I get is: "iTunes could not connect to the iPhone 6 because an invalid response was received from the device."

  The steps I did:

  1 - uninstall iTunes and reset the folder (/ var/db/lockdown) reinstall iTunes (11.4). When I connect my phone iPhone and iTunes asks if I want to trust each other. I click ok and trust on both.

  .. .and that's it! Still does not work.

  Any idea?

  Thank you!

  CiberBob

  You are right. An iPhone with iOS 10.0.1 requires the latest version of iTunes, 12.5.1, which requires OS X 10.9.5 or above. Your version of iTunes is too old, just like the OS X version to support.

• How is it that my iPod Shuffle will not connect to my radio?

  How is it that my iPod Shuffle will not connect to my radio?

  Don't understand the question...  How you expect an iPod shuffle to connect to a radio?

• iPad will not connect to internet

  Hello

  Recently I replaced my router wireless with an old faithful that d-Link DSL - 502T cable modem as I have now 2 extreme airport to handle a Wi - Fi. I have now a much faster internet access on my Macbook Pro, but my iPad 2 now will not connect to internet.

  Airport utility on the iPad shows that the internet is disconnected, but I don't know how to solve this problem.

  The two airports are configured in Bridge mode. Help someone?

  If you have LAN - 502T running as the main router.

  Bridge the airport should simply pass the DHCP via the Dlink but sometimes it's a failure.

  The two AE connected directly to the modem or the other?

  I would recommend the static method of intellectual property.

  https://discussions.Apple.com/message/25135547?ac_cid=tw123456#

  In this method, you must first AE plugged directly to the Dlink and the second AE connected in the first and bridge... it will dhcp to EI and is often a better configuration with Apple gear. Worth a try.
  

• Printer will not connect via USB

  HP lj1022 printer will not connect not not via the USB port after the installation of the new driver upgrade hp lj1020/1022 for Windows 7 (64-bit). Driver seems to install properly until the moment where he is asked to connect the USB cable. Then he hangs up. HP lj 1020 printer appears in the display to the dashboard as the default printer. Computer recognizes the printer as hp printer lj1022 but in another "device not specified Panel when and only when the printer is on and the USB cable is connected." When printing, nothing ever comes from queue.

  Diagnosis is only that something is stuck in the queue and remove the task from the queue, but does not. Diagnostic shows no problem.

  The lj1022 printer accepts data from two other computers, as well on Windows xP and using the same cables. Three other USB ports have been tested on the new Windows 7 computer without results. The USB ports on the Windows 7 computer accept keyboards, mouse and flash memories wireless dongle without problem. The Windows 7 computer also sends data to a printer wireless with no problems.

  Hi Rmhodgson,

  Run the following utility below.

  http://support.HP.com/us-en/document/c02073861

• HP Officejet 6500 a: printer will not connect to the wireless network.

  I got this HP printer for a while and it worked fine.  Our old router is out and we had to get a new one.  Installed perfectly and printer continued to work properly.  The password for the router was ridiculous, that's why I changed it to something much more simple to remember.  Since then, my printer will not connect to wireless internet.  I have a ~ and reinstalled the printer but still have the same problem.  I thought maybe to try the former password would, but who does not work either.

  Anyone has any ideas that might help before chuck it and go and get a new one altogether?

  Thank you.

  Easy things first.  Turn off the router and the printer.  Turn on the router and wait 3 minutes.  Turn on the printer and see if it connects to your router.  Status?

  If no joy, temporarily disable all security in the router.  Now try to connect the printer to your SSID not guaranteed without password.  Status now?

  If OK, go back and add WPA2-AES with your simple password.  Status now?

• My Ipad mini will not connect with my wifi at home.  Other devices are able to connect with wifi.  I repeatedly entered the wifi password, but this is not ACCEP it.  Worked very well.  I turned the mini ipad market and nothing.  Help!

  My Ipad mini will not connect with my wifi at home.  Other devices are connecting with the wifi at home.  I turned the mini ipad market a few times and nothing. He recognizes wifi but when I touch the password, it continues to request the password.  Help!  It was working fine earlier in the day.

  What has happened with your iPad since earlier today, when it worked? updated App or iOS? nothing at all

  If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network

• iPod Touch will not connect to iTunes

  My iPod Touch will not connect to iTunes. When I connect it to my laptop with the cable my laptop USB recognizes the iPod begins to charge and 10 Windows asks me if I want to open it to view files, but it seems to treat it as a camera and I just want to know if I want to get pictures on it and on the laptop.

  I made sure I have the latest software updates on the iPod and iTunes and thought this would fix the problem, but iTunes still does not recognize my iPod because it never appears on the Panel for me to sync things for her, etc.

  How can I get my iPod to be recognized by iTunes again? Very recently, it stopped connecting.

  If your computer does not recognize your iOS device, follow the steps proposed by Apple.

  https://support.Apple.com/en-us/HT204095

• L850 satellite will not connect to Wifi

  Hi, new here.

  I have a Toshiba L850 which does not connect to wifi,
  Many other devices in the House and the L850 was last week.

  You can see my router but will not connect.
  It is the 'limited access' connection, but not more.
  Said troubleshooting couldn't identify the problem.

  When I try and access the Device Manager, I get a "Explorer.EXE" the specified service does not exist as an installed service?

  Help.

  Paul.

  > He sees my router but will not connect.

  I guess that your router is secured by encryption (WEP or WPA / WPA2)
  Test WiFi connection without the use of WLan encryption settings.
  Turn off in the router settings and test the connectivity.

  Of course you need to do that just for test purposes because it s not advised to use the unsecured WiFi.

  Where you have no problem to connect the laptop to 'open' WLan, I recommend changing the encryption type.