Magic Jac Skype open or not answer
I tried to open these two programs for 4 hours now, but I received no response
I did try disconnecting / close, still no response.
can you please identify the source of the problems?
Hello
1. have you done any change in software on the computer lately?
Method 1.
You need to perform a clean boot to find the program that is causing and then disable or remove.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353/en-us
Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.
Method 2.
Also try to uninstall and reinstall the programs and check out them.
I hope this helps.
Tags: Windows
Similar Questions
-
LR CC 2015 only opens after (not answer) and delay
I have a recurring problem with LR being slow to open. I almost always get a (LR does not) message and then I let stand opens, but not all the time.
Help please. On the time limit.
Hello
It's ok if you are using Mac
You can follow these steps
Open Lr
Go to Lightroom-> preferences-> file handling and change the size of the cache for at least 30 GB.
Please press purge cache as well.
Click OK
Release of Lr and re - open that
~ Jitendra
-
Install Skype and client not answer and late development - Win7
Whenever I open the installation of Skype or the client program, it takes about 15 minutes to even begin to answer. After that, I managed to work through the installer, the customer takes on another 40 mins tom pass the login, after this point it continues to accuse an extremely.
I've had no problems before and have not installed all the weird programs recently.
I tried also to disable ads via the internet options, uninstall, delete temp and appdata folders.
Looking for tanks next to "format your pc."
Thanks for your help, it seemed that all I had to do was run CCleaner and that fixed the IE and Skype with her.
-
Mac Pro 2013 become hot, not answer and stop.
Hello
I have a 2013 Pro Mac, I bought as used before 5 months and he was well, before 3 days, the weather was warm (approx. 28 °) and under normal conditions, use my Mac Pro start freezing and not answered every 15-30 Minutes and automatically stop or I have to disconnect the power cable.
I started looking on the problem, I checked the bodies of the Mac Pro and I found it very hot, the fan worked but slow, I searched on Google on a tool or a command I can do the fan faster and I found an application called SMC FanControl, this app showing me that Mac temperature of 48 ° also with this app, I was able to turn the fan to Max speed, I heard the noise of the fan, it worked perfectly with this app. The Mac Pro early to work perfectly also with in normal and hard jobs.
Yesterday, I decided to clean all of my Mac Pro material, maybe that this solves the problem, it was dirty, and I did as new as you can see in this picture:
I also used for better CPU and GPU thermal compound I found on the market.
BUT the problem came with the first video editing, 48 ° c, closing down and not be able to turn it on for 5 Minutes.
The question is: why my Mac Pro not control the fan automatically? is it a software or a hardware problem? If the material someone we know exactly?
Best regards
Which component was 48 c?
What was the hottest component?
It's not hot at all.
From now on my MP 2013 with base CPU, CPU ITPP and CPU sensors 1-4 are about 100 ° C and speed of 84CFan two GPU time 1750
• Record the time of the next frost. After the reboot, open the Console app in Finder > Applications > utilities and look for entries of the log at the time of freezing. Suspicious message here.
Search before the journal entry that begins with BOOT_TIME since it is the first line of a startup
Apple cannot help you because you have disassembled the Mac.
You already reset the SMC to take part. try resetting NVRAM/MRTP memory
-
Skype desktop will not connect
The application was working fine yesterday and when I went to turn on my computer and load the program, it does not connect after I try to open a session, there is nothing wrong with my computer, or other programs, it's just Skype works do not, I uninstalled the program several times and reinstalled it and its still does not. I'm not sure how he's going to leave one day being fine to the next does not... suggestions?
http://heartbeat.Skype.com/2016/10/skype_connection_issue.html
-
my computer guard saying (not answer) and mix web pages (display both parts). start and stop is extremely slow.any help will be highly appreciated.
Hello
Use the methods in the answer above for IE issues and those below, if there is General
performance issues.What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
"" > Tap to open sticky notes ' command would not work.
"> Tap to open sticky notes ' command would not work. I try to use sticky notes & I think it's the way to get to sticky notes. It is a command line in windows section 'help '. Nothing is more fundamental than that. Is there a work around?
Hi novelty451,
The command used to open sticky notes on the command line is StikyNot.exe. To use this command, try the following steps:
a. Click Start, type cmd and press to enter.
b. in the command prompt, type StikyNot.exe and press ENTER.
c. you should now see a sticky note.There are other ways to open sticky notes, see the following articles for more information.
1. see Sticky Notes open
2. see Notes sticky keyboard shortcutsVisit our Microsoft answers feedback Forum and let us know what you think.
-
I downloaded Skype, but was not able to install the toolbars, for he said: ' there was a problem with the Windows Installer Package and a script was necessary to allow installation runs. "
Also I tried connect to Skype, but Windows has prevented running Skype and "was to find a solution."
How can I download/installation of SkypeIt comes with Vista, upgrade install and activate Forum.
http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads
They will help you with your Skype questions in the Forum Vista programs at the above address.
See you soon. Mick Murphy - Microsoft partner
-
OSITCP_pipe_send: Magic of the pipe is not valid.
Hello!
I have big problems with a six month old SG200 - 50 p. Randomly, the switch stops working, seems to restart without notice. Configure a SYSLOG server to intercept any useful information from the device.
- (Image Active) firmware version: 1.3.7.18
- Start the Version: 1.3.5.06
I have attached a copy of the SYSLOG file. But I want to clarify a specific line, as seems to be the real problem.
% OS-F-CCI: OSITCP_pipe_send: magic of the pipe is not valid. Pipeid - 1702259060, magic - 1634498143 * FATAL ERROR * task Reporting: NCCD. Software version: 1.3.7.18 (date of 12 January 2014 time 18:01:12) 0x16adc8 0x166f34 0x6df974 0x48fd60 490670 x 0 0 x 490890 0x6e785c 0x4c7950 0x4c7d5c 0x1223fc
To be honest, I don't know what that means. And Google seems to be useless in this regard.
I intend to update the firmware of this weekend, because I don't know what to do next. I have the same problem on another switch (SF200 - 48P), but it occurs less often (a perhaps a month).
No information on this error message would be appreciated, as I try to understand what is happening.
Thank you.
Hello
I see this question once only once but reset factory and the manual configuration seems to solve the problem.
If you however still see this error please open ticket with small business to engineering team can look into it:
http://www.Cisco.com/c/en/us/support/Web/TSD-Cisco-small-business-suppor...
Kind regards
Aleksandra
-
my password ive tried signing in Skype.I do not remember that they send me a security code, in which I put that in, then he said: error?
Could someone help me please
It would be best if you contacted Skype support team regarding this issue.They are experts in the field of your request and would be in a better position to answer your concerns. You can contact them through this link:
You can also join the community of users here:
How can I contact Customer support https://support.skype.com/en/faq/FA1170/how-can-i-contact-skype-customer-service?intcmp=SN-Mods
-
Windows Live Mail (not answer)
In windows live mail, when I try to open "contacts" fades the screen and, at the top, it says WLM (not answer). How to fix this?
Hello
I suggest you send the request in Windows Live Forums for assistance on this issue.
http://answers.Microsoft.com/en-us/windowslive/forums
It will be useful.
-
Green key "drag" disappears and can not answer call?
This has happened a LOT recently... When I get the little green dot that dragged you to open a call, I drag, but does not answer the call, the button disappears and I'm just stuck looking at a phone ringing I can't answer and have missed several important calls.
All solutions, another way of answering a call, I have yet to understand?
Thank you!!!
You have restarted your phone lately? http://KB.Palm.com/wps/portal/KB/common/article/23197_en.html if you have this problem, you can also try the indications of partial or total erasing on this page as well.
Except that you can also slide open the keyboard to answer a call.
-
Outlook and Chrome not answer-constantly
I noticed that especially after coming from his sleep, Chrome and Outlook (2011) will not answer. There is no solution but to the family force them. An activity Manager does not show their or their assistants to be processor or memory overload; in fact, my RAM is usually less than half used. Why these software don't like my iMac?
Model name: iMac
Model ID: iMac10, 1
Processor name: Intel Core 2 Duo
Processor speed: 3.06 GHz
Number of processors: 1
Total number of cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus speed: 1.07 GHz
Boot ROM version: IM101.00CC.B00
Version of the SCM (System): 1.52f9
Serial number (System): ZL0031PG5PC
Material UUID: 71CBB1B3-7993-5D39-818F-222F3CAF4108
If the problem started after you update OS X...? Then, it looks like you will have to perhaps to update or uninstall these third-party App which are the cause of the problem.
-
Buttons to blend into the background. Button menu to open does not have a menu.
Button, button "home" to move forward, back, bookmark this page button, show your bookmarks and open menu buttons are present, but you can not see them. Button menu to open does not have a menu drop-down.
. Hello
Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:
Note: You can print these steps or consult them in another browser.
- Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
- Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
- Remove the Firefox installation folder, which is located in one of these locations, by default:
- Windows:
- C:\Program Files\Mozilla Firefox
- C:\Program Files (x 86) \Mozilla Firefox
- Mac: Delete Firefox in the Applications folder.
- Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
- Windows:
- Now, go ahead and reinstall Firefox:
- Double-click on the downloaded Setup file and go through the steps in the installation wizard.
- Once the wizard is completed, click to open Firefox directly after clicking the Finish button.
More information on the resettlement of Firefox can be found here.
WARNING: Uninstaller or the use of Firefox and not run a third remover as part of this process, because who could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and passwords saved. These can be recovered, unless they have been backed up on an external device!
Please report back to see if this helped you!
Thank you.
-
Hello
When I open firefox (Note: I have firefox version 28.0 and security Karspersky 2014) I get a black screen covering the firefox window around and it looks more lika a large window in firefox. What is it?
Concerning
Jean
Huh, that's news...
You can try Firefox in Safe Mode to see if the problem goes away. I think that it is an extension.
- Run firefox.exe - safe-mode in the search bar in the Start Menu. (Make sure Firefox is closed)
Have you added new extensions recently around the time this started happening? The details of your system displays the following:
- Adobe Acrobat - create PDF 1.2 ([email protected])
- Anti-banner 14.0.0.4917 ([email protected])
- Dangerous sites 14.0.0.4917 blocker ([email protected])
- Kaspersky URL Advisor 14.0.0.4917 ([email protected])
- Troubleshooting 1. 1a ([email protected]) it comes by default, so this isn't the problem.
- Virtual keyboard 14.0.0.4917 ([email protected])
Maybe you are looking for
-
Receiving the message 'Firefox close unexpectedly', but can not reopen.
Get the message "Firefox completely unexpected". I click on "reopening", but it does not reopen. Get the same message every time. Tried to delete and redownloading, but the same thing. I have a Mac. I used Firefox when he leaves suddenly. Now it just
-
Intel WiDi question with my Satellite L750
Hello I bought the new WiFi module on ebay and Intel 7260 supports wifi 867Mbps (in theory) speed and Bluetooth 4.0. WiFi works perfectly but the problem is Bluetooth device is not listed in Device Manager, I tried to install the driver, but there is
-
Transfer the software to another PC
Hello I have a retail copy of Microsoft Office XP on a PC that is defective and must be disarmed to screw up the hard drive. I can reinstall my Office XP on my new machine and, if so, do I need to do to make sure that it is "registered" as a copy is
-
HP computer 1411TX 1000 laptop brightness keys function
HP 1000-14 computer 11TX laptop function keys f2 and f3 does not, how do I adjust the brightness and contrast. Windows 7 Ultimate 32-bit operating system
-
Problems with the Bluetooth device on pc Windows 8.
Original title - microsoft When my sister buy a laptop, she was already a Bluetooth device and has been able to use. but last July 2015 I can't turn on my Bluetooth on my PC device, I checked services.msc and discovered he was not running so I was st