Magic Mouse 2 crashing MacPro end of 2013

Recently bought a Magic Mouse 2. Whenever I try to connect to the Mac Pro end of 2013, it it connects moves a little bit and then block the Mac - goes to black screen and the crash report.

Also have a MacBookPro running fine (on El Capitan).

Anyone with similar problems?

Model name: Mac Pro

Model identifier: MacPro6, 1

Processor name: 6-Core Intel Xeon E5

Processor speed: 3.5 GHz

Number of processors: 1

Total number of hearts: 6

(By heart) L2 Cache: 256 KB

L3 Cache: 12 MB

Memory: 32 GB

Boot ROM version: MP61.0116.B16

Version of the SCM (System): 2.20f18

Version of lighting: 1.4a6

El Capitan 10.11.2

State requirements system 10,11 or later version.

The Magic Trackpad 2 - Technical Specifications

Tags: Mac OS & System Software

Similar Questions

  • MacPro end of 2013

    Hello

    I use a MacPro specs are:

    Processor: 3.7 GHz Quad Intel Xeon E5 cord

    Memory: 12 GB 1866 MHz DDR3 ECC

    Chart: AMD over-pants D300 2048 MB

    OS X Version of Yosemite 10.10.5

    Monitors: Dell U2312HM screen 23 '' x 2

    251 GB of storage: free 57.5 GB Flash memory

    I worked on my work, and I must admit I'm not to save my work all the time and I thank God that have taken up some of the Adobe Applications. But almost every day my MacPro crashes / freezes.

    I mainly these open applications Spotify, Microsoft Outlook, Adobe Illustrator, Adobe Photoshop, Adode Indesign, Firefox and sometimes Adobe Acrobat. Mainly sound when I use Illustrator that goes up the spinning wheel, but my Spotifty is still to play the tracks but does not move the playback bar.

    I tried to click around the screen, clicking on the desktop and sometimes it works, but the spinning wheel is still there. I tried to force it to quit smoking, but most of the time it does not work, so I have to restart the MacPro using the power button.

    When it restarts any applications that I had opened back, some mode of recovery other not. Then my Wacom tablet is so slow he only works on a single screen and must use the mouse to go to the screen in system preferences to get the two screens for work or reboot the computer because my tablet is not recognize.

    I did a full cleaning and reinstall and it seemed to work at first, but now has slipped to his old ways. I thought it might be Adobe apps the cause because I used to get the error messages and is a journal of my crashes, but its getting boring. Also, I delete large files, junk files, empty the trash when it's possible. It seems that other colleagues do not go there as much as I do and we all use MacPro.

    Can someone shed light on this case I am confused because I have never been more troble with my previous G4?

    Thank you

    Alison

    The Mac maintains a record of all messages, good or bad, issued by the system. This journal is kept in power outages and reboots. It contains clues to why your Mac no longer responds. But it's a huge file and it is almost impossible to dig through without additional clues on where to look.

    Next time you have such a problem, not the exact time, hour, minute, second.

    After you restart your Mac, open Console.app (in the folder/Applications/Utilities). Huge scroll to the date and time of the problem. The next restart will begin with "BOOT_TIME", so the stuff right before that it's the key. Opening of the forum and start a response. Cut and paste a full screen of messages whose BOOT_TIME line, but nothing after.

    People who read this are all volunteers. More lines is usually just more difficult to navigate.

  • iMac 27 inch end of 2013 - constant beachballing, leading to the freezing and then crashing a

    EtreCheck version: 2.9.12 (265)

    Report generated 2016-05-26 22:17:37

    Download https://etrecheck.com EtreCheck

    Time 04:15

    Performance: good

    Click the [Support] links to help with non-Apple products.

    Click the [details] links for more information on this line.

    Click on the link [check files] help with unknown files.

    Verify the signatures of Apple: enabled

    Problem: Beachballing

    Description:

    Intermittent beach balling, followed by gel applications and then crashing one at a time, until the whole system crashes. Must be restarted by holding down the power button. It happens 1 - 2 times a day.

    Hardware information: ⓘ

    iMac (27 inch, at the end of 2013)

    [Technical details] - [User Guide] - [warranty & Service]

    iMac - model: iMac14, 2

    1 3.4 GHz Intel Core i5 CPU: 4 strands

    8 GB of RAM expandable - [Instructions]

    BANK 0/DIMM0

    OK 4 GB DDR3 1600 MHz

    BANK 1/DIMM0

    OK 4 GB DDR3 1600 MHz

    0/DIMM1 BANK

    Vacuum

    BANK 1/DIMM1

    Vacuum

    Bluetooth: Good - transfer/Airdrop2 taken in charge

    Wireless: en1: 802.11 a/b/g/n/ac

    Video information: ⓘ

    NVIDIA GeForce GTX 775M - VRAM: 2048 MB

    iMac 2560 x 1440

    System software: ⓘ

    OS X El Capitan 10.11.5 (15F34) - since startup time: less than an hour

    Disk information: ⓘ

    ST1000DM003 disk HARD APPLE disk0: (1 TB) (rotation)

    EFI (disk0s1) < not mounted >: 210 MB

    Macintosh HD (disk0s2) /: 999,35 go-go (640,11 free)

    Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

    USB information: ⓘ

    Apple Inc. BRCM20702 hub.

    Apple Inc. Bluetooth USB host controller.

    Apple Inc. FaceTime HD camera (built-in)

    Mitsumi Electric Apple USB optical mouse

    Information crush: ⓘ

    Apple Inc. Thunderbolt_bus.

    Goalkeeper: ⓘ

    Mac App Store and identified developers

    Unknown files: ⓘ

    / Library/LaunchAgents/edu. Emory.oracle_java_whitelist.plist

    SH /Library/Scripts/Emory/oracle_java_whitelist.sh

    /Library/LaunchDaemons/com.deploystudio.lkdc_fix.plist

    / usr/libexec/configureLocalKDC

    2 unknown files found. [Check files]

    Kernel Extensions: ⓘ

    /Applications/Boxcryptor.app

    [no charge] com.boxcryptor.BCFS.filesystems.bcfs (3.1.0 - SDK 10.9-2016-02-12) [Support]

    / Applications/Toast Basic.app

    com.roxio.BluRaySupport [no charge] (1.1.6 - 2010-03-05) [Support]

    [no charge] com.roxio.TDIXController (1.7-2010-03-05) [Support]

    / System/Library/Extensions

    [no charge] com.m - audio .driver .firewire (1.10.2 - 2016-05-18) [Support]

    [no charge] com.m - audio .midisupport .driver .usb (M-Audio USB MIDI support 1.1 - 2016-05-18) [Support]

    com.paceap.kext.pacesupport.master [no charge] (5.9.1 - 10.6 SDK - 2016-05-18) [Support]

    com.palm.ClassicNotSeizeDriver [no charge] (3.2.1 - 2016-05-18) [Support]

    com.Tascam.usb2audio.driver [no charge] (2.10 - SDK 10.7 - 2016-05-18) [Support]

    tc.tctechnologies.driver.TCNear [no charge] (4.1.3 - 10.6 SDK - 2016-05-18) [Support]

    /System/Library/Extensions/PACESupportFamily.kext/contents/plugins

    com.paceap.kext.pacesupport.Leopard [no charge] (5.9.1 - 10.4 SDK - 2013-10-07) [Support]

    [no charge] com.paceap.kext.pacesupport.Panther (5.9.1 - SDK 10.-1-07-10-2013) [Support]

    [loading] com.paceap.kext.pacesupport.snowleopard (5.9.1 - 10.6 SDK - 2013-10-07) [Support]

    com.paceap.kext.pacesupport.Tiger [no charge] (5.9.1 - 10.4 SDK - 2013-10-07) [Support]

    /System/Library/Extensions/TASCAM_US1xx.kext/contents/plugins

    com.Tascam.usb2audio.driver_TIGER [no charge] (2.10 - 10.4 SDK - 2012-09-21) [Support]

    Startup items: ⓘ

    ciscod: path: / System/Library/StartupItems/ciscod

    ARD: path: / Library/StartupItems/ard

    EmagicA26A62mFirmwareLoader: Path: / Library/StartupItems/EmagicA26A62mFirmwareLoader

    M-audio FireWire Audio Helper: path: Library/StartupItems/M-Audio FireWire Audio Helper

    M - Audio Firmware Loader: path: Library/StartupItems/M-Audio Firmware Loader

    PACESupport: Path: / Library/StartupItems/PACESupport

    Startup items are obsolete in OS X Yosemite

    Launch system officers: ⓘ

    [operation] com.apple.Finder.plist (2015-08-23) - invalid signature!

    [loading] com.apple.FollowUpUI.plist (2015-08-23) - invalid signature!

    [loading] com.apple.ScreenReaderUIServer.plist (2015-08-24) - invalid signature!

    [loading] com.apple.powerchime.plist (2015-08-22) - invalid signature!

    [loading] com.apple.quicklook.32bit.plist (2015-08-22) - invalid signature!

    [loading] com.apple.quicklook.plist (2015-08-22) - invalid signature!

    [loading] com.apple.quicklook.ui.helper.plist (2015-08-22) - invalid signature!

    [loaded] 8 tasks Apple

    [loading] 151 tasks Apple

    [operation] 79 tasks Apple

    Demons of launch system: ⓘ

    org.Postfix.master.plist [failure]

    [loaded] 46 tasks Apple

    [loading] 153 tasks Apple

    [operation] 90 tasks Apple

    Launch officers: ⓘ

    [no charge] com.adobe.AAM.Updater - 1.0.plist (2016-05-15) [Support]

    [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2016-05-10) [Support]

    [operation] com.adobe.AdobeCreativeCloud.plist (2016-02-24) [Support]

    [loading] com.adobe.CS5ServiceManager.plist (2011-11-11) [Support]

    [loading] com.cisco.anyconnect.gui.plist (12 / 12/2013) [Support]

    [operation] com.eastwest.server.plist (2010-06-10) [Support]

    [loading] com.mcafee.menulet.plist (2013-09-30) [Support]

    [loading] com.mcafee.reporter.plist (2013-09-30) [Support]

    [loading] com.oracle.java.Java - Updater.plist (2015-11-14) [Support]

    [loading] edu.emory.oracle_java_whitelist.plist (2014-01-16) [Support]

    [loading] org.macosforge.xquartz.startx.plist (2014-08-11) [Support]

    Launch of the demons: ⓘ

    [loading]    PACESupport.plist (2013-02-01) [Support]

    [loading] com.adobe.ARMDC.Communicator.plist (2016-05-10) [Support]

    [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-05-10) [Support]

    [loading] com.adobe.SwitchBoard.plist (2013-12-14) [Support]

    [operation] com.adobe.adobeupdatedaemon.plist (2016-04-12) [Support]

    [loading] com.adobe.agsservice.plist (2016-04-12) [Support]

    [loading] com.adobe.fpsaud.plist (2016-05-09) [Support]

    com.Apple.aelwriter.plist [loading]

    [ongoing] com.Apple.Qmaster.qmasterd.plist

    [loading] com.boxcryptor.BCFS.KextLoaderHelper.plist (2016-05-22) [Support]

    [operation] com.cisco.anyconnect.vpnagentd.plist (12 / 12/2013) [Support]

    com.deploystudio.lkdc_fix.plist [no charge] (2009-03-10) [Support]

    com.LANDesk.broker.plist [no charge] (2010-01-20) [Support]

    [operation] com.m - audio .firewire .helper .plist (2011-07-28) [Support]

    com.McAfee.VirusScan.fmpd.plist [no charge] (2013-09-26) [Support]

    [loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

    [loading] com.oracle.java.Helper - Tool.plist (2015-11-14) [Support]

    com.Quark.quarkupdate.plist [no charge] (2013-12-21) [Support]

    [loading] com.sibelius.sari.plist (2010-03-25) [Support]

    [loading] com.wdc.WDPrivilegedHelper.plist (2016-04-14) [Support]

    [loading] org.macosforge.xquartz.privileged_startx.plist (2014-08-11) [Support]

    tc.tctechnologies.TCNear.plist [no charge] (2013-07-16) [Support]

    Launch User Agents: ⓘ

    [loading] com.adobe.AAM.Updater - 1.0.plist (2011-11-15) [Support]

    [loading] com.adobe.ARM. [...]. plist (2012-04-16) [Support]

    [loading] com.apple.SafariBookmarksSyncer.plist (2011-11-10) - /Applications/Safari.app/Contents/SafariSyncClient.app/Contents/MacOS/SafariSyn customer: Executable not found!

    [loading] com.google.keystone.agent.plist (2016-03-02) [Support]

    [operation] com.spotify.webhelper.plist (2016-05-21) [Support]

    User login items: ⓘ

    Application of database Microsoft Daemon (/ Applications/Microsoft Office 2011 / Microsoft/Office Database Daemon.app)

    Dropbox application (/ Applications/Dropbox.app)

    Hidden AdobeResourceSynchronizer Application (/ Applications/Adobe Acrobat DC/Adobe Acrobat.app/Contents/Helpers/AdobeResourceSynchronizer.app)

    WDDriveUtilityHelper Application (/ Applications/WD Drive Utilities.app/Contents/WDDriveUtilityHelper.app)

    Boxcryptor application (/ Applications/Boxcryptor.app)

    Other applications: ⓘ

    [ongoing] com.adobe.CCXProcess.231712

    [operation] com.adobe.acc.AdobeDesktopService.98912.A116CE4F-AB75-400E-AFF5-CE9A00F2A0B8

    [ongoing] com.Adobe.accmac.232032

    [ongoing] com.apple.AmbientDisplayAgent

    com.apple.BKAgentService [loading]

    com.apple.MailServiceAgent [loading]

    [ongoing] com.getdropbox.dropbox.48032

    [ongoing] com.HP.devicemonitor

    com.LANDesk.broker [loading]

    com.McAfee.VirusScan.fmpd [failure]

    [ongoing] com.westerndigital.WDDriveUtilityHelper.182112

    [ongoing] org.Mozilla.Firefox.148512

    tc.tctechnologies.daemon.TCNear [loading]

    [loading] 409 tasks Apple

    [operation] 214 tasks Apple

    Internet Plug-ins: ⓘ

    AdobePDFViewerNPAPI: 15.016.20039 - SDK 10.11 (2016-05-15) [Support]

    Flash Player: 21.0.0.242 - SDK 10.6 (2016-05-18) [Support]

    iLokClientHelper: 3.1 (2008-05-26) [Support]

    AdobePDFViewer: 15.016.20039 - SDK 10.11 (2016-05-15) [Support]

    Scorch: 6.1.0 (2010-04-23) [Support]

    iPhotoPhotocast: 7.0 - 10.8 SDK (2013-04-18)

    DirectorShockwave: 11.5.8r612 (2010-08-18) [Support]

    QuickTime Plugin: 7.7.3 (2016-05-18)

    FlashPlayer - 10.6: 21.0.0.242 - SDK 10.6 (2016-05-18) [Support]

    PDF Browser Plugin: 2.4.4 - SDK 10.6 (2012-03-13) [Support]

    AdobeAAMDetect: 3.0.0.0 - SDK 10.9 (2016-04-12) [Support]

    F5 VPN SSL Plugin: 7091.2013.1208.1 - SDK 10.8 (2014-06-09) [Support]

    MeetingJoinPlugin: Unknown - SDK 10.6 (2014-11-20) [Support]

    Musicnotes: 1.18.8 (2010-09-21) [Support]

    Silverlight: 5.1.41212.0 - SDK 10.6 (2016-02-11) [Support]

    Default browser: 601 - SDK 10.11 (2016-05-18)

    Flip4Mac WMV Plugin: 3.2.0.16 - SDK 10.8 (2013-12-13) [Support]

    SharePointBrowserPlugin: 14.6.4 - SDK 10.6 (2016-05-11) [Support]

    JavaAppletPlugin: Java 8 update 91 build 14 version Check (2016-04-21)

    OfficeLiveBrowserPlugin: 12.3.0 (2011-08-03) [Support]

    Audio plug-ins: ⓘ

    DVCPROHDAudio: 1.3.2 (2010-10-21)

    TASCAM_US1xx: Unknown - SDK 10.7 (2012-09-21) [Support]

    3rd party preference panes: ⓘ

    Flash Player (2016-05-09) [Support]

    Flip4Mac WMV (2013-03-29) [Support]

    Java (2016-04-21) [Support]

    Time Machine: ⓘ

    Skip system files: No.

    Mobile backups: OFF

    Automatic backup: YES

    Volumes to back up:

    Macintosh HD: Disc size: 999,35 GB disc used: 359,24 GB

    Destinations:

    Helen backup [Local]

    Total size: 2.00 TB

    Total number of backups: 40

    An older backup: 10/18/15, 20:39

    Last backup: 15/05/16, 01:47

    Size of backup drive: adequate

    Size of backup 2.00 TB > (disc 359,24 GB X 3)

    Top of page process CPU: ⓘ

    14% kextd

    6% McAfee Reporter

    4% WindowServer

    com.HP.devicemonitor 2%

    kernel_task 2%

    Top of the process of memory: ⓘ

    Kernel_task 725 MB

    614 MB mdworker (34)

    Firefox 418 MB

    180 MB mds_stores

    Dropbox 147 MB

    Information about virtual memory: ⓘ

    2.91 GB of free RAM

    5.08 used GB RAM (2.67 GB being cached)

    Used Swap 0 B

    Diagnostic information: ⓘ

    26 May 2016, 22:16:24 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221624_[redacted].crash

    / usr/local/McAfee/FMP/bin/pgme

    26 May 2016, 22:16:14 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221614_[redacted].crash

    26 May 2016, 22:16:04 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221604_[redacted].crash

    26 May 2016, 22:15:54 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221554_[redacted].crash

    26 May 2016, 22:15:44 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221544_[redacted].crash

    26 May 2016, 22:15:34 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221534_[redacted].crash

    26 May 2016, 22:15:24 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221524_[redacted].crash

    26 May 2016, 22:15:14 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221514_[redacted].crash

    26 May 2016, 22:15:04 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221504_[redacted].crash

    26 May 2016, 22:14:54 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221454_[redacted].crash

    26 May 2016, 22:14:44 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221444_[redacted].crash

    26 May 2016, 22:14:34 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221434_[redacted].crash

    26 May 2016, 22:14:24 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221424_[redacted].crash

    26 May 2016, 22:14:14 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221414_[redacted].crash

    26 May 2016, 22:14:04 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221404_[redacted].crash

    26 May 2016, 22:13:54 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221354_[redacted].crash

    26 May 2016, 22:13:44 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221344_[redacted].crash

    26 May 2016, 22:13:34 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221334_[redacted].crash

    26 May 2016, 22:13:24 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221324_[redacted].crash

    26 May 2016, 22:13:14 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221314_[redacted].crash

    26 May 2016, 21:59:09 /Library/Logs/DiagnosticReports/rpc.net_2016-05-26-215909_[redacted].crash

    /usr/sbin/RPC.NET

    26 May 2016, 21:57:13 self-test - spent

    24 may 2016, 22:00:26 /Library/Logs/DiagnosticReports/rpc.net_2016-05-24-220026_[redacted].crash

    24 may 2016, 21:44:36 /Library/Logs/DiagnosticReports/rpc.net_2016-05-24-214436_[redacted].crash

    24 may 2016, 21:15:13 /Library/Logs/DiagnosticReports/rpc.net_2016-05-24-211513_[redacted].crash

    24 may 2016, 21:04:21 /Library/Logs/DiagnosticReports/rpc.net_2016-05-24-210421_[redacted].crash

    May 23, 2016, 22:25:42 /Library/Logs/DiagnosticReports/rpc.net_2016-05-23-222542_[redacted].crash

    Uninstall the McAfee software according to the manufacturer's instructions, to see if this brings improvements.

  • Upgrade of RAM MacPro (end 2013)

    I have a MacPro renovated (end of 2013), and I'll update the RAM.  If I 2x16GB of RAM, does it matter which of the four slots I put them in?  And, is there an advantage to get 4x8Go instead of 2x16GB?  My thought is that if I get two sticks of 16 GB, I can always add two more down the road if I think that I need.

    Thank you

    Ed

    Yes, BUT:

    To date, 16GB DIMMS for these Macs is registered DIMM (they have an extra buffer registry on their products so that they will not overload the memory Bus).

    DIMM not Exchange and "friendly game with others. If you choose ANY DIMMs recorded, you will be forced to remove all DIMMS not saved to get everything working properly.

    The United States, OWC/MacSales has a program where they will allow you to sell a limited number of your old DIMMS for a little money when you buy them new.

    http://eShop.MacSales.com/tech_center/support/rebates/memory.cfm

    --------

    The traditional way of installing DIMMs has been to put the largest DIMMS in slots more small number. This Mac Pro (end of 2013 dark cylinder) requires no pairs, gets a slight edge of pairs in adjacent locations (i.e., 1 and 2 or 3 & 4), but the differential gap is very, very small and should not influence what you buy.

  • Magic Mouse to scroll or drag

    Hi all, need your help.

    I have a Macbook Pro (retina, end 2013) with Yosemite 10.10.5. I just got a Magic Mouse (A1296 3VDC) with new batteries. I've matched with no difficulty to my Mac. Standard features are perfect (cursor autour, by adjusting its speed and standard single, double or triple click). However, but no matter what I do, the features do not work (hit button scrolling, secondary, zoom, swipe...).

    I already checked System Preferences > mouse and System Preferences > accessibility, without success.

    I also tried to reset the SMC.

    Any suggestion?

    Thank you

    If you are still running Yosemite (as indicated in your profile) then you must go to 10.11.3 El Capitan.   It is the operating system required for the use of the new Magic Mouse 2.

  • After the update of Sierra: not to Disable Trackpad with Magic Mouse connected

    Hello

    After that I updated to macOS Sierra on my MacBook Pro the Trackpad is not disable mouse connected with Magic.

    Feature: MacBook Pro retina 15 inches (end of 2014) on macOS Sierra.

    Since the update, I noticed that my stays compatible with my Magic Mouse connected after built-in trackpad window connection.

    In system-> accessibility-> mouse and Trackpad preferences, I have not "ignore the built-in trackpad when mouse or trackpad wireless is present". If I switch it off and on again once again, the parameter will be.

    However, once I lock the device (user name right-> connection... window) and reconnect, the trackpad works. You must pass the parameter each time.

    Is this a bug of Mac OS Sierra (can't find anything) or am I missing something? I am aware that the trackpad is reactivated at the login window, but before it will deactivate after logging in.

    I don't use Magic Mouse, but I have USB Wired mouse and I have the same problem since installing Sierra.

    I have the box ticked, but I must go and clear the check box and then save.

    I have to use a mouse all the time because my trackpad goes haywire and I wasn't able to find a solution for this. It moves its own and open stuff on its own.

  • Magic Mouse works only with the latest el capitan

    Why Apple is not the problems with El Capitan (10.11.6) and it's Magic Mouse? The only way is connected to my MacBook Pro is to remove the com.app.bluetooth.plist at the end of each session and even that does not always work. When it is finally connected, the mouse connects and reconnects constantly during the session. The mouse is an Apple product, and Apple does not seem to recognize the problem or give anyone a viable solution.

    Determine that the problem is inherent in the software is an act of faith (there is no batches of messages here with the same problem).

    Try resetting the SMC and the NVRAM.

    Barry

  • Magic Mouse Lag and disconnection

    10.11.5 MacPro 5.1 mid-2010

    The offset of the mouse and the disconnection is so bad that I had to go back to a mouse that is causing a problem in my production. I'm a graphic designer and the need that the mouse. I tried all of the solutions I've read here and on the web without success. I'm going to buy a bluetooth adapter to see if that helps at all. Any suggestions on this dongle/adapter or if someone found a solution to this problem of bluetooth. I have new usb 3.0 devices and cables to come this week and as I read disconnection worsens with usb 3.0.

    Anyone, please help before I have no hair left!

    If your using a first generation Magic Mouse, the disconnection problem is sometimes caused by faulty battery contacts. Here's a solution:

    How to fix the magic mouse disconnect problems

    Tracking errors can be fixed by simply cleaning the lens: Year Easy Fix for a Magic Mouse Tracking problem

    And some bluetooth connection problems are caused by a corrupted preferences file: How to fix the OS X Bluetooth Wireless problems

    Tom

  • the magic mouse 2 must remain always on?

    I have an iMac nine of the end of 2015. Y at - it recommendations to maintain in good condition the keyboard mouse Magic 2 and magic that comes with it?

    I tried to find answers in the documentation of the iMac, but cannot find anything. So my question is: should I turn off my magic mouse 2 everytime I turn on my computer? Or should it remain always on? (same question goes for the magic keyboard)

    Thanks in advance for your answers!

    Zhinyuu,

    https://manuals.info.Apple.com/manuals/1000/MA1739/en_US/magic-Mouse2-Userguide. PDF

    Note: When you are not using your Magic Mouse 2, he falls asleep to save batteries. If you do not use your mouse for an extended period, it goes o to save even more.

    follow https://manuals.info.Apple.com/manuals/1000/MA1738/en_US/magic-keyboard-UserGuid

    Note: When you are not using the magic keyboard, he falls asleep to save batteries. If you do not use your keyboard for an extended period, it goes o to save even more.

  • Last Magic Mouse 2 is not compatible with the Mavericks 10.95 - and that stinks

    It is not so much a question as an expression of stunned disappointment.  My old mouse Magic went kablooey, and so I got a new.  Unfortunately when I the paired with my MacPro 2012, running the Mavericks 10.95 (sorry Apple, you have not matched the Mavericks speed and performance with Yosemite and El Capitan) I discovered that features the touch like scrolling and swiping has not worked.

    After an hour to read the little booklet that comes with the mouse, zap the PRAM, reset the SMC and usually ask myself? *  I watched the Magic Mouse box and found the answer in 3 grey dots on white type: requires OS 10,11 or higher.  All right.  Mea culpa, caveat emptor, blah blah.  I should have read through the entire page of the Magic Mouse on the Apple Store Web site, but I already have the product so don't figure there were many new take into account.

    However, it seems strange to me that a completely necessary peripherals does not work with a BONE from a few years ago.

    There are loyal customers (30 years of computer science and I have never used or owned a PC) who use your products as professional (I'm a sales manager of creation) and, for reasons that go beyond taste, prefer your earlier and faster OS.  Apple wants to move the herd along for many understandable reasons.  I do advertising.  I get it.  Offers new features and the "improvements" that Miss on users who refuse to put up-to-date is perfectly logical.  But prevents them from having a functional Apple mouse goes too far.  It will encourage strong armament and it stinks.

    In light of Apple's strategy, it seems pretty ironic that the same company that once derided the PC world as thinkers authoritarian group straight out of Orwell is curve at this level to get its users to conform to his version of the future.  What the * happened to "Think Different"?

    Good question, I guess, and I can only opine; as you know, we are here just volunteers.

    The question is... when a company changes its products.   As I see it, different operating systems have developed over the years at a huge pace, such that cannot not could be foreseen four years ago.   So the Magic Mouse 1 was fine for the moment but did not have the ability to adapt to meet the current needs.     So what does Apple?   It must be a new mouse that will respond to current needs and anticipate the needs for some time in the future.

    You can still buy the old MM1, although you might have to go hunting.   And of course, you can take the old one back if it was purchased less than 14 days ago in most countries and 28 days ago in the United Kingdom and most European countries, I believe.

    I hope you get over your troubles.

  • Magic Mouse 2 * new * does not work

    New macbook and new magic mouse 2 but I can't connect via usb or bluetooth, I tried to restart the two and wait for it to load. literally, I don't know where to go from here. need help! Save me

    Note: Magic Mouse2 cannot be used when you are connected to his cable.

    • Setting up your Apple - Apple Support wireless devices

    Follow these steps to configure your Magic Mouse 2, Magic Keyboard or Magic Trackpad 2:

    1. Connect the lightning to the USB cable to the port of lightning on the device and
    2. the other end of the cable to your Mac.
    3. Make sure the switch is in position I. (Green will be visible).
    4. The device appears in the Bluetooth preferences and automatically pairs with your Mac.
    5. The Bluetooth Preferences window indicates the level of status and connection fees of
    6. your device. When the device is charged, unplug it for wireless use.

    There are several opinions and comments about magic Mouse2

    http://www.Apple.com/shop/reviews/MLA02LL/A/magic-mouse-2

    also you might feel free to contribute to them, but also to comment

    Apple feedback • comments support • return of products

    Among the comments, are issues of the user that may or may not help you

    make the best diagnosis of your installation + user experience problem.

    If your product (MM2) is the Thunderbolt port, as it should, it may

    not being able to associate as some suggest it can, through the use of the USB port. Since

    This is not a. The port of loading may or may not be useful to attach

    mouse to the computer during the initial installation; to see if it is recognized.

    You can find it does not help. Or can the gremlin inside the MM2

    self-pity and decide whether to allow a connection in any case. Say what? Please?

    If the mouse was purchased directly from Apple (official, store or online)

    You should have 14 days to return the product. An Apple Store

    Genius can be useful in practice to troubleshoot or to help set up a mouse.

    My mouse are USB & all fasteners; they can't run away + I of good spare parts.

    Sorry your mouse is pointing upwards. I give a talk, no uncertain words.

    Good luck in this case!

  • Can not switch to OSX Recovery Mode: looking for the keyboard and magic mouse

    I'm trying to reset my end 2012 Mac Mini 2.3GHz/i7/16GB to factory settings to try to get the machine a new lease on life.

    However, when I try to enter in Recovery Mode (in now command ⌘ + R when the system starts up), the machine will stop to a screen showing the instructions to turn on a magical keyboard and Magic Mouse.

    I have a trendy apple (USB) keyboard and a USB mouse is connected.

    How can I activate these entries, or how can I pass this screen looking for a keyboard/Magic Magic Mouse?

    [I guess one option is to use a magic mouse or a magical keyboard - I have in my office - but it is not sensible that you need them to access recovery mode].

    Thank you

    Got my Magic Mouse of the office, got into recovery mode. Surprised, you need a Magic Mouse, and who does not have a USB mouse to the recovery mode!

  • Options to load a new magic mouse.

    OK, I know that you have to plug the usb cable into the bottom of the mouse and the other end into the usb port on the computer to load the thing.  In time waiting... you need to leave the computer on... I don't want to do that... Yes, there is a possibility to plug the usb cable into a usb wall Chargers you can buy? This way I could turn the desk top completely off...

    Hello

    Magic Mouse 2 can also be charged via a USB power adapter.

    More information:

    https://manuals.info.Apple.com/manuals/1000/MA1739/en_US/magic-Mouse2-Userguide. PDF

  • Sensitivity of the magic mouse 2

    OS X 10.11.3 (15 d 21) model name: iMac model identifier: iMac14, 2 name of the processor: Intel Core i5

    I recently changed to a Magic Mouse 2 and it worked perfectly. Recently the sensitivity seems nave has increased as evidenced by the fact that I have to hover over a link to activate it. How to restore to original operation?

    Hi DCRIOW,

    If you want to adjust the settings of your Magic Mouse 2, take a look at the resource below to adjust the settings in system preferences.

    Using system preferences

    Preferences system systemic control ("global" settings) and is available in the Apple () menu in the upper-left corner of the screen. Preferences system allows you to set things like your resolution screen, keyboard, mouse, sound, taken the printer settings, settings, accounts and more sharing.

    Customize your mouse

    The preferences panel mouse look different depending on what type of mouse you are using. These settings allow you to set the mouse sensitivity to control how quickly the pointer moves on your screen when you move your mouse, and adjust your double-click reflexes. Other controls may be available, depending on the type of mouse you are using.

    1. In the Apple Menu, open system preferences.
    2. Choose View > mouse, or click on the mouse icon.
    3. To control the speed of the pointer (cursor) moves across your screen when you move the mouse, click on Point & click and use the tracking slider to adjust the speed.
    4. If double-click speed if poster, you can use the double-click slider to adjust the speed.
    5. To change the action settings, click the tab more moves. You can enable and disable the gestures for blow and the Mission control.

    Configure your Apple wireless devices

    Mouse Magic 2, Magic Keyboard, Magic Trackpad 2

    Follow these steps to configure your Magic Mouse 2, Magic Keyboard or Magic Trackpad 2:

    1. Connect the lightning to USB cable to the port of lightning on the device and plug the other end of the cable to your Mac.
    2. Make sure the switch is in position I. (Green will be visible).
    3. The device appears in the Bluetooth preferences and automatically pairs with your Mac.
    4. The Bluetooth Preferences window shows the status and costs connecting your device. When the device is charged, unplug it for wireless use.

    Note: The Magic Mouse 2 unusable when you are connected to the cable.

    Take care

  • Customize a Magic Mouse 2 run OSX 10.10.5?

    I go to the mouse in system preferences, but I don't get the scrolling options?

    (A) you need to run El Capitan for the Mac to recognize the Magic Mouse 2

    (B) once you have El Capitan, you may need to connect the Mouse via a lightning USB cable 2 Magic initially to get the Bluetooth all straighten.  After that, you can go all Bluetooth.

    I had a similar problem with a Magic Trackpad 2, but it works very well on my El Capitan end 2009 27 "iMac.  But I need both El Capitan and wired USB lightning original to get the thing rolling, now it is Bluetooth all the way.

Maybe you are looking for

  • Sync doesn't show tab by other devices

    I have two computers running Windows 8.1 FF 26: at work and at home. Both are synchronized, however, whenever I want to see the tabs on the other computer (history - tabs from other devices), all I see is a blank tab. sync the two settings are to syn

  • xyboard vzw droid Forum?

    Hello world Does anyone know if verizon has a section on the forums there own to xyboard everything I see is compressed Xoom and the Galaxy, but nothing for the xyboard droid. Is that what you kindly can report the link if not how can we bring to cre

  • Internet on Windows 10 extremely slow

    My Mac Pro has recently been having a strange problem. When I open the boot camp menu by pressing the option key, when I try to select Windows, it displays a BSOD. However, when I leave the default at startup, it works fine... except, however, for th

  • Need graphic driver for the graphics card Radeon

    My laptop has a Radeon graphics card and Windows 7 is installed on my laptop. Please help me find the graphics driver for the Radeon graphics card.

  • Connection diagram DAQ Asst &amp; error 50103

    Hello LabVIEW community. I'm trying to integrate two different screws that require an AIGND on my SCB-100. The SCB-100 has two distinct AIGNDs (pinout of the 1 and 2), but in the two screws of the DAQ Asst I use, pinout 2 asks the circuit diagram for