Magic Trackpad 2 very good, but too sensitive?

Hello

I just magic keyboard and trackpad, second version two, to use with my mid-2015 15 "MBP 2.8. I am very happy with them, but I was wondering if there is a way to reduce the sensitivity of the magic trackpad. I fly over for a second something it opens, or verified, or...

I checked Sys Prefs, didn't really see something but perhaps to that I don't know what I'm looking for.

Any ideas to make it less sensitive?

The best

Elmer

Hello Elmerlang,

Have you looked at this?   Go to the Apple logo (upper-left) > System Preferences > Trackpad.   At the top are three options.  Choose to point and click.

Then you can play with the click (beginning in middle), then follow-up speed (about three places from the left).

And that still leaves room to go to less sensitive.

Good luck.

Tags: Peripherals

Similar Questions

  • P40-10 X Equuim: Reception of WLan is very good, but extremely slow

    Hello

    I just bought an Equuim P40 - when I connect to wireless broadband, the reception is very good but is extremely slow when it comes to load the pages of the internet - any suggestions on how to remedy this?
    Thank you!

    Hello

    It's not easy to say why the notebook loads page s Web slowly.
    For the most part, Web sites load slowly due to the amount of data.
    If pages use flash animations or there is a big traffic on Web sites, the service could be overworked and loads of slower sites.

    If the antivirus software is activated and control each transfer of data the sites could also loads slowly.

    As you can see, several factors can affect the loading of the page!

  • YouTube plays very good but not Facebook or other videos on the site, it says I'm missing a plugin?

    When I use Youtube videos play very well but on Facebook and some other sites, that the videos will not play. I just get a message indicating that a plugin is missing. Everything works fine on IE. I just download Mozilla last night.

    Hi Brandonacker, you probably need to install adobe flash player plugin for sites to display video content, which you can download from https://www.adobe.com/products/flashplayer/distribution3.html (use the windows exe for plugin installer according to browsers)

  • The audio sounds very good, but when I press ctrl + enter considerably worse: it sounds, how can I fix?

    Refer to title

    You can use the trial of the hearing.

    Available downloadable Setup files:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • my cursor/trackpad too sensitive

    My cursor\trackpad (MacPro) gives me fits.  Much too sensitive.

    Cursor open everything he touches briefly and selects randomly.

    Accessibility settings are to the max "slow".  Any other means of

    setting?  Help for this old retired priest would be much

    appreciated.  He could not swear, but this problem seems to

    were created with the last update.

    There is no parameters. See if this helps:

    If your pointer is nervous when you use a trackpad, Magic Trackpad or Magic Mouse - Apple Support

    This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

  • After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

    After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

    Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

    (1) restart you device.

    (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

    (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

    (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

    (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

    (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

    (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

    (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

    https://support.Apple.com/en-us/HT201252

    (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

    Council: https://discussions.apple.com/docs/DOC-9892

  • My internet speed is good, but the download of firefox is very slow. Why?

    I have a WiFi internet connection shared with 54.0 Mbps speed. Internet high speed is good, but the installer of Firefox download Firefox at very slow speed. It takes about 10 to 15 minutes in the Firefox download. Please correct the problem if it occurs through your side, else do tell me what can I do to feel better. Thank you.

    Full Setup (for Windows) can be found at mozilla.org -> systems & languages under the Green download button link.

  • Pavilion g6-2260sh but slow download speed download is very good

    Greetings!

    I have a HP Pavilion g6-2260sh laptop with Windows 8.1 Pro operating system.

    My problem is that the internet download speed fell from 80 Mbps at 3-4 Mbps. Download speed remained the same as before, the 25 Mbits. My laptop is connected to a router with another laptop and a PC. These 2 computers have excellent internet speeds.

    I reinstalled the operating system, but the problem persists. After reinstalling, the speed was very good, maybe an hour and then she fell to 3-4. I only installed the drivers from hp, nothing else driver finder.

    I tried connecting by cable and wireless with the same results.

    The Device Manager shows 1 unknown device and 1 missing driver for Ralink_RT3290_Bluetooth_01

    Please help me,

    Jandras

    Well, I found the answer in a comment on a youtube video...

     
  • So I recently found my game Age of Mythology. The disc is very good and works, but I have not the case with the number of products to this topic. What should I do?

    So I recently found my game Age of Mythology. The disc is very good and works, but I have not the case with the number of products to this topic. What should I do?

    Hi GuyT6,

    ·         What version of the operating system is installed on the computer?

    I suggest you contact the customer assistance form help and more information.

    How and when to contact Microsoft and support Customer Service

    http://support.Microsoft.com/kb/295539

  • Windows 7 does not recognize my 3 Seagate external drives but is very good with Western Digital and other sticks USB Flash. Windows Vista will see them.

    My apologies if this is a query repeatedly, but I can't find a job anywhere and he leads me into the wall.

    I have 3 external Seagate hard drives. All 3 range from about 3 years 11 months old, 1 TB - 3 TB of capacity, and I use them all from time to time to back up my media. In the past months, my Dell XPS ceased to recognize them, 95% of the time. Sometimes they will be Plug and Play and be fine, but otherwise the result when I plug them is coming the power light and the whirring disc fortunately but nothing on the laptop. They recognized themselves on my other machines running Vista. All other Flash memory devices are very good.

    I also have a hard drive Western Digital external powered, almost identical, that Plug and play every time.

    I tried all my ports and various cables and adapters. I tried them on other machines and they are very good, it seems to be just with my Dell and the Seagates. It recognizes everything that I plug in there from the iPhone to Flash Drives. It has all the latest drivers and Windows updates.

    When they're not working, they do not appear in the devices, disk management, Explorer or UVCView Manager. When they do, all settings appear to be well. My laptop runs Windows 7 Edition Home Premium with Service Pack 1.

    I assigned each their own letter drive, disabled power management and they are not protected by Word. The drivers are the standard Windows ones, because these devices do not use their own. I have the latest chipset drivers, everything works perfectly and is completely up to date.

    When I run UVCView (when one of them does not work), it is said there is an error autour MaxPacketSize, current externally is set to 9 and it said "ERROR: low peripheral speed require bMaxPacketSize0 = 8" branded error. I don't know if this is a factor? This may explain why it's slower transfer data to my machine that has USB3.0 it does on another machine, it begins at 130 MB/s and falls to 30 in 10 seconds.

    I tried all combinations of power off.

    I activated the network detection.

    I uninstalled all the USB in the Device Manager and reinstalled after the start.

    All 3 discs work instantly in my older Vista laptop runing.

    I am a loss to understand. I'm pulling my hair out and I don't have a lot to lose these days! There must be a setting in my computer or on the Seagates but I checked all the usual places and some of the more irritable areas.

    Thank you in advance.

    I'm surprised that the removal of the INFCACHE did not work.  Readers (all external references in fact) were cut at the time, right?  With a reboot after and before you plug anything back?
     
    These instructions really come down to:
     
    Unplug all USB devices other than the keyboard and mouse
    Open C:\Windows\System32\DriverStore
    INFCACHE.1 and rename it INFCACHE.old
    Restart the computer
    Reconnect it (one at a time) each USB device - giving the system about 30 seconds per device to 'catch up '.
     
    If you got on the rest as well your system files are good to go.

  • I use upstream, that allowed color spaces are CMYK. When I place a RGB file, preflight reports an error (very good). But when I add the Fx (effect) does not forward flight "Bevel and Emboss", report an error, which is really annoying. How can I fix? I hav

    I use upstream, that allowed color spaces are CMYK. When I place a RGB file, preflight reports an error (very good). But when I add the Fx (effect) does not forward flight "Bevel and Emboss", report an error, which is really annoying. How can I fix? I like to have 'The transparency blend space' on "Document CMYK" and in the preflight profile "Fusion of transparent space" required: "CMYK".

    Interestingly, if I copy and paste your images into a new doc 2 points scored.

    I think that the solution is to assign the CMYK printer profile in the document. In this case, you no longer control upstream for RGB color, because by default it is converted to CMYK space correct on export or print output.

  • Sierra + Magic Trackpad 2 = Force click with a single finger no longer works

    Since the upgrade to Sierra, did someone else, difficulties with the Magic Trackpad 2 and using the force click to pull up definitions? If I turn it back to "tap with three fingers," it works, but is not the "click with one finger. In fact, I'm not sure I can get this intermediate response click at any point that used to be present in El Capitan.

    Hey Lonnie Warpup,.

    If I understand correctly, you are using macOS Sierra and you try to use the power of touch, but it does not perform this action.
    I would recommend that you read these articles, they explain if your device supports the Force Touch, with a setting to enable and disable the Force Touch and how to set the sensitivity and how to turn the Look up feature words.

    The Magic Trackpad and Magic Trackpad 2 supports all available on laptops Apple trackpad gestures.

    Sierra macOS: use a trackpad Apple wireless

    1. In the Apple menu, choose System Preferences.
    2. Click Trackpad.
    3. Click on the tab 'Point & Click '.
    4. Find "Click pressure" and adjust the slider according to your preferences. Note that the sound of the click of Exchange with the click pressure adjustment.

    To turn off the click Force function, uncheck the box 'Force Click and haptic feedback'. This will disable the functionality described in the Trackpad preferences pane.

    With the help of a touchscreen trackpad Force - Apple Support

    • Look up a word: CTRL-click on the word or phrase (in some applications, you may need to select all first), then select find from the context menu. Or type the word or the sentence with three fingers (if the gesture is selected in the Préférences Trackpad).

      If your trackpad supports force by one click, you can set the gesture of looking up to use it instead of a tap. (To force the click, press firmly until you hear a click deep.)

    macOS Sierra: search for words

    Thank you for using communities of Apple Support. Have a good.

  • Click and drag does not work Magic Trackpad 2

    I have a new Magic Trackpad 2, paired to a Macbook Pro (mid-2014). It works for the most part very well, but I have a big problem. Dragging never works well. For example, if I want to move a folder in the Finder to a different location, I used for a click or select, then just drag it to the new location. Now it does not work or works so rarely that it is useless.

    I got the 1 trackpad, and I have no problem.

    Make sure that you are not too much pressure.

  • M6-1035dx Pavilion: Pavilion m6-1035dx touchpad y axis too sensitive after upgrade Windows 10

    I installed my m6-1035dx Pavilion at 10 Windows laptop. Everything seems to work pretty well, except the touchpad. The Synaptics 10 Windows driver is much too sensitive along the y-axis (vertical movement), but it is very well along the x-axis (horizontal movement). If I try to move my cursor in a circle, I get an ellipse instead, and this disparity makes it very difficult to use touchpad. Sensitivity adjustment does not help, because it scales sensitivity times X and Y at the same time.

    I tried these different drivers with varying results:

    1. latest Synaptics touchpad driver for Windows 10 (version 19.0.19.1): Y axis is too sensitive with respect to X axis. Otherwise, this driver seems to work perfectly.

    2 no driver (Windows using the generic PS/2 mouse driver): X / axes are correct, but no other feature of the trackpad works (scrolling, etc..)

    3 last Synaptics touchpad driver driver from HP for Pavilion m6-1035dx (version 16.0.5.1) page: X / axes are correct, but scrolling does not work in many applications. This driver does not officially support Windows 10 (I think that it supports up to 7), but it seems to work correctly in Windows 10, aside from the problems with scrolling.

    I would point out to Synaptics, but they do not seem to support (as far as I can tell), so I'm posting here in the hope that someone would have an idea of what I can try next. There may be a hidden registry setting that I can change?

    Hello @mrbumpy409,

    Thanks for the reply.

    I also looked in the registry, I couldn't find anything that jumped. I speculated with the values of height and width of the corner, but change does not seem to do anything.

    I have no information on the release of driver, but you can try the driver compatible windows 8 rather than windows 7 one.

    Version: 16.2.10.12
    sp58572.exe

    Thanks, I look forward to your response.

    If this post helped you, feel free to click on the thumbs up!

  • BlackBerry Smartphones '0' key too sensitive and he keeps tapping himself

    Hello world

    I need assistance with my Bold 9900.

    The '0' key is too sensitive. Sometimes when I type, I very lightly touch and it keeps typing "0 s" throughout the day. When I use the 'Space' key, the phone type '0 '. Maybe it's the hardware, I don't really know, but it's a nightmare.

    I have already restarted the phone, pulled out battery, etc...

    Thank you!! I'd appreciate any help.

    Felipe

    FelipeArrivabene wrote:

    He got a few drops of rain a few months ago, but he continued to work well and it wasn't heavy rain. Just a few drops.

    Hello

    I'm sorry to say I think it's already too late! If our BlackBerry never am wet then we shouldn't try to turn to see if it works. Must immediately remove the battery and also SIM media card. We should put in a bag of uncooked rice that absorb moisture. Should allow for at least 3 to 4 days unless we are sure that the moisture has been absorbed completely. Then we need to put our BlackBerry over entire surface of output as stabilizing heat, or in the dashboard of a car on a sunny day. Before inserting the battery, we should be sure that it is completely dry.

    When moisture or any substance liquid in our BlackBerry it starts corrosion which leads to the problem like quick battery drainage, by typing problem and many more. You the current problem appears to be for this reason!

    Now, you can visit your Internet access provider to any repair store to see what they can offer.

    Good luck.

Maybe you are looking for