MAIL UPGRADE 10.11 fails

After upgrade to El Capitan in Yosemite, a popup labelled 'Mail Upgrade' kept appearing, disappearing and reappearing.  A text read, by turns "redevelopment of library" and "data migration" accompanied by a warning tone whenever he disappeared and reappeared.

What can I do to get the Mail application to open?

JM

The new version of Mail stores its database in a different format that the old, so the database must be converted before Mail can use it. Sometimes, the conversion fails because the old database is damaged, or because of a bug in the conversion code.

What you should do depends on what type of e-mail accounts you have. The first step is to back up all data, if you don't have a current backup.

A. Si you know that you have IMAP or Exchange only e-mail accounts

The easy way to recover is to delete the old database and start over. You can do this without losing all the messages, provided that:

☞ All your incoming mail accounts are on an IMAP or Exchange Server

☞ You store messages sent on the server

☞ You have no mailboxes "on my Mac".

Independent mail services the best-known as iCloud and Gmail are inspired by the IMAP. On the other hand, hosted by ISP e-mail services often use pop. If your ISP is one of your providers of mail services (or the only), you cannot use this procedure. See the section below in this case.

If you know that the above conditions are met, please continue to do so.

Quit Mail runs. Back up all data.

Open your home folder's library folder by pressing the option key and selection

Go ▹ library

in the Finder menu bar. Inside, it is a subfolder named "mail". Move this folder on the desktop. You do not move the e-mail application; you move a folder named "mail".

Launch of Mail. Your mailbox should be restored automatically. The messages will be downloaded from the servers, so it can take a long time if you have very large mailboxes. Some people have mailboxes in the gigabyte range, and which can be a problem if your bandwidth is measured.

If the mailboxes are restored successfully, you can delete the folder that you moved to the desktop. You may have to re-create your rules, signatures and custom stationery Mail. While it is very important for you not to have to do these things, ask for instructions before you delete the folder.

B. Si you have a POP or "on my Mac" mailbox store, or if you don't know what you have

Move the folder of mail on the desktop as in the part has and open.

Press the key combination command + F to search. In the line of chips to search along the upper part of the window, select "Mail". Below, defined as the search criteria

The name ends with mbox

Results of the research will be a list of folders with a name ending with '.mbox '. Each of them represents a box the letters.

Launch of Mail. All mailboxes will be empty at the beginning, but if you have any IMAP or Exchange mailbox (including iCloud), they should fill in automatically after a delay, as in part A. If you have now all the messages you want to keep, you can stop here. Otherwise, import from mailboxes in the search results. You'll probably want to skip those with names such as "Deleted Messages", "Junk", "Spam", or "Trash". Some may be duplicates of what you already; those that you can remove.

In some cases, a mailbox may fail with an error to import. If this happens, thanks for posting your results.

If all the mailboxes imported successfully, you can delete the mail on the desktop folder.

Tags: Mac OS & System Software

Similar Questions

  • RAC 11.2.0.3 to 12.1.2.0 upgrade - root.sh failed on the 2nd node

    Hi all

    We are being upgraded CARS 11.2.0.3 to 12.1.2.0 upgrade - root.sh failed on the 2nd node

    We found that GI is down for the phase of script root.sh on the 2nd node, node 1 it went successfully.

    End the command output

    2016-01-18 15:08:29: cmd running: /u01/app/12.1.0.2/grid/bin/clsecho Pei a f clsrsc m 4003

    2016-01-18 15:08:29: output of the command:

    > CLSRSC-4003: patched Oracle Trace Analyzer (TFA) Collector File successfully.

    > end of command output

    2016-01-18 15:08:29: cmd running: /u01/app/12.1.0.2/grid/bin/clsecho Pei a f clsrsc m 4003

    2016-01-18 15:08:29: output of the command:

    > CLSRSC-4003: patched Oracle Trace Analyzer (TFA) Collector File successfully.

    > end of command output

    2016-01-18 15:08:29: CLSRSC-4003: patched Oracle Trace Analyzer (TFA) Collector File successfully.

    2016-01-18 15:08:29: cmd running: /u01/app/12.1.0.2/grid/bin/sqlplus v

    2016-01-18 15:08:29: output of the command:

    >

    > SQL * more: Production of the version 12.1.0.2.0

    >

    > end of command output

    2016-01-18 15:08:29: CRS got version: 12.1.0.2.0

    2016-01-18 15:08:29: ckpt: ckpt - oraclebase - / u01/app/grid-chkckpt-name ROOTCRS_STACK

    2016-01-18 15:08:29: invoking '/u01/app/12.1.0.2/grid/bin/cluutil ckpt - oraclebase - / u01/app/grid-chkckpt-name ROOTCRS_STACK.

    2016-01-18 15:08:29: trace file=/u01/app/grid/crsdata/alhijaz8/crsconfig/cluutil1.log

    2016-01-18 15:08:29: user oracle: /u01/app/12.1.0.2/grid/bin/cluutil ckpt - oraclebase - / u01/app/grid-chkckpt-name ROOTCRS_STACK

    2016-01-18 15:08:29: s_run_as_user2: currently running/bin/su oracle-c ' echo CLSRSC_START; /U01/app/12.1.0.2/grid/bin/cluutil - ckpt - oraclebase/u01/app/grid-chkckpt-name ROOTCRS_STACK '

    2016-01-18 15:08:29: deleting the file/tmp/file6rMePM

    2016-01-18 15:08:29: file deleted successfully: / tmp/file6rMePM

    2016-01-18 15:08:29: direct exit code: 0

    2016-01-18 15:08:29: / bin/su executed successfully

    2016-01-18 15:08:29: invoking '/u01/app/12.1.0.2/grid/bin/cluutil ckpt - oraclebase - / u01/app/grid - chkckpt-name ROOTCRS_STACK - pname VERSION.

    2016-01-18 15:08:29: trace file=/u01/app/grid/crsdata/alhijaz8/crsconfig/cluutil2.log

    2016-01-18 15:08:29: user oracle: /u01/app/12.1.0.2/grid/bin/cluutil ckpt - oraclebase - / u01/app/grid - chkckpt-name ROOTCRS_STACK - pname VERSION

    2016-01-18 15:08:29: s_run_as_user2: currently running/bin/su oracle-c ' echo CLSRSC_START; /U01/app/12.1.0.2/grid/bin/cluutil - ckpt - oraclebase/u01/app/grid - chkckpt-name ROOTCRS_STACK - pname VERSION '

    2016-01-18 15:08:30: deleting the file/tmp/fileMYEj5K

    2016-01-18 15:08:30: file deleted successfully: / tmp/fileMYEj5K

    2016-01-18 15:08:30: run the exit code: 0

    2016-01-18 15:08:30: version1 is 12.1.0.2.0

    2016-01-18 15:08:30: version2 is 12.1.0.2.0

    2016-01-18 15:08:30: version status match is 1

    2016-01-18 15:08:30: setting the TRUE isRerun

    2016-01-18 15:08:30: invoking '/u01/app/12.1.0.2/grid/bin/cluutil ckpt - oraclebase - / u01/app/grid-chkckpt-name ROOTCRS_STACK-status ".

    2016-01-18 15:08:30: trace file=/u01/app/grid/crsdata/alhijaz8/crsconfig/cluutil4.log

    2016-01-18 15:08:30: user oracle: /u01/app/12.1.0.2/grid/bin/cluutil ckpt - oraclebase - / u01/app/grid-chkckpt-name ROOTCRS_STACK-status

    2016-01-18 15:08:30: s_run_as_user2: currently running/bin/su oracle-c ' echo CLSRSC_START; /U01/app/12.1.0.2/grid/bin/cluutil - ckpt - oraclebase/u01/app/grid-chkckpt-name ROOTCRS_STACK-State

    2016-01-18 15:08:31: deleting the file/tmp/filezMRowL

    2016-01-18 15:08:31: file deleted successfully: / tmp/filezMRowL

    2016-01-18 15:08:31: direct exit code: 0

    2016-01-18 15:08:31: / bin/su executed successfully

    2016-01-18 15:08:31: the status of 'ROOTCRS_STACK' is the SUCCESS

    2016-01-18 15:08:31: oracle Clusterware has already been configured successfully; That's why out...

    2016-01-18 15:08:31: cmd running: /u01/app/12.1.0.2/grid/bin/clsecho Pei a f clsrsc m - 456

    2016-01-18 15:08:31: output of the command:

    > CLSRSC-456: the Oracle grid Infrastructure has already been configured.

    > end of command output

    2016-01-18 15:08:31: cmd running: /u01/app/12.1.0.2/grid/bin/clsecho Pei a f clsrsc m - 456

    2016-01-18 15:08:31: output of the command:

    > CLSRSC-456: the Oracle grid Infrastructure has already been configured.

    > end of command output

    2016-01-18 15:08:31: CLSRSC-456: The Oracle Grid Infrastructure has already been configured.

    in the trace file, I could see some errors related to ASM or aslib (see below)

    ---------------------------------------------------------------------------------

    2016-01-18 14:18:24.992593: OCRASM: proprasmo: ASM instance is down. Move forward to open it in dirty mode.

    2016-01-18 14:18:28.360087: OCRRAW: kgfo_kge2slos error of the kgfolclcpi1 cell: UESA-00200: cannot read [32768] bytes of the N0008 drive to offset [140737488355328]

    UESA-00201: Disc N0008: 'ORCL:OCR_VD '.

    UESA-00407: asmlib error! function = [asm_close], [0] = error mesg = [i/o Error]

    UESA-00200: cannot read [32768] bytes of disk N0005 to offset [140737488355328]

    UESA-00201: Disc N0005: "ORCL:FRA."

    UESA-00407: asmlib error! function = [asm_close], [0] = error mesg = [i/o Error]

    UESA-00200: cannot read [32768] bytes of the N0002 drive to offset [140737488355328]

    UESA-00201: Disc N0002: "ORCL: DATA".

    UESA-00407: asmlib error! function = [asm_close], [0] = error mesg = [i/o Error]

    UESA-00200: cannot read [32768] bytes of disk N0001 to offset [140737488355328]

    UESA-00201: Disc N0001: "ORCL:ASM_DATA1."

    UESA-00407: asmlib error! function = [asm_close], [0] = error mesg = [i/o Error]

    2016-01-18 14:18:28.360087*:kgfo.c@947: kgfo_kge2slos to kgfolclcpi1 error stack: UESA-00200: cannot read [32768] bytes of the N0008 drive to offset [140737488355328]

    UESA-00201: Disc N0008: 'ORCL:OCR_VD '.

    UESA-00407: asmlib error! function = [asm_close], [0] = error mesg = [i/o Error]

    UESA-00200: cannot read [32768] bytes of disk N0005 to offset [140737488355328]

    UESA-00201: Disc N0005: "ORCL:FRA."

    UESA-00407: asmlib error! function = [asm_close], [0] = error mesg = [i/o Error]

    UESA-00200: cannot read [32768] bytes of the N0002 drive to offset [140737488355328]

    UESA-00201: Disc N0002: "ORCL: DATA".

    UESA-00407: asmlib error! function = [asm_close], [0] = error mesg = [i/o Error]

    UESA-00200: cannot read [32768] bytes of disk N0001 to offset [140737488355328]

    UESA-00201: Disc N0001: "ORCL:ASM_DATA1."

    UESA-00407: asmlib error! function = [asm_close], [0] = error mesg = [i/o Error]

    2016-01-18 14:18:28.360087*:kgfo.c@2269: kgfoOpenDirty dg = OCR_VD diskstring = ORCL: * filename = / u01/app/grid/crsdata/alhijaz9/output/tmp_amdu_ocr_OCR_VD_01_18_2016_14_18_25

    2016-01-18 14:18:28.360324: OCRRAW: kgfoOpenDirty: dg = OCR_VD diskstring = ORCL: * filename = / u01/app/grid/crsdata/alhijaz9/output/tmp_amdu_ocr_OCR_VD_01_18_2016_14_18_25

    2016-01-18 14:18:28.360394: OCRRAW:-dump to trace to the error output.

    2016-01-18 14:18:28.360424: OCRRAW: error [kgfolclcpi1] [kgfokge] to kgfo.c:2287

    2016-01-18 14:18:28.360446: OCRRAW: UESA-00200: cannot read [32768] bytes of the

    Hello

    The root.sh 2A failed because of problems with the ASM.

    It fixed the issue by updating asmlib.

    restart the /etc/init.d/oracleasm

    or

    stop /etc/init.d/oracleasm

    /etc/init.d/oracleasm start

    /etc/init.d/oracleasm scandisks

    /etc/init.d/oracleasm listdisks

  • Unusable since the Sierra mail upgrade

    When first, I upgraded my iMAC to Sierra (10.12), Mail would crash whenever I tried to select the "Sent" folder Most of the other cases could access fine; some would also Mail crashing. Sierra of re-installed, no luck.

    Today, mail started crashing on a few other issues. Then, finally, he crashed altogether and will reopen; whenever I try to open the application, I get a "Mail quit unexpectedly" dialog and dump. I think it's the most relevant information:

    Crashed thread: 6 dispatch queue: com.apple.root.default - qos

    Exception type: EXC_CRASH (SIGABRT)

    Exception codes: 0 x 0000000000000000, 0 x 0000000000000000

    Note the exception: EXC_CORPSE_NOTIFY

    Request for clarification:

    Reason for termination due to an untrapped exception "NSInvalidArgumentException" app,: '-[NSNull length]: unrecognized selector sent to instance 0x7fffb4d7cf10'

    Abort() called

    ending with an exception uncaught of print type

    Once more, I reinstalled Sierra, but still cannot open the Mail at all. Any thoughts?

    Hi PTDiMarzio,

    Thank you for using communities Support from Apple.

    You can correct Mail Mac OS X 10.12 Sierra does not ("Mail quit unexpectedly") by removing the folder container "com.apple.mail.savedState." Mac OS X saves the locations of the window and documents open most programs to restore them when the program is started after you quit smoking. Sometimes after upgrading from Mac OS X to the latest version, there may be some problems of manipulation with the prior consent of the State of the mail which could lead to Sierra registered mail is not an answer and crashing.

    How to remove the Mail from the saved state:

    1. Force quit Mail app ('Application is not responding do not"question!).
    2. Go to the Finder.
    3. Hold the Option key and select 'library' in the menu 'go. '
    4. Go to the folder 'containers > com.apple.mail > data > library > state saved application' and move the folder called "com.apple.mail.savedState" to the trash.
    5. Empty the trash.
    6. Restart your Mac.
    7. Mail recovery.

    Hope this will help.

    See you soon!

  • Stuck to the "Mail Upgrade" status window

    Hello

    After upgrading to Mac OS Sierra, when I tried to open Mail.app, it shows me the upgrade message window and that's it. Nothing happens here. I've had this window for almost a day now; all buttons-'continue', 'Quit' is also grayed out. I tried to leave mail and stimulus but no difference. Also have restarted the MBP as well.

    Hope someone can get an idea.

    Thanks in advance

    Everything on this forum: suggestions about Mail.app?

    Even to this day, when I try to open, it is still stuck at the upgrade window.

  • HP 8000 Elite USFF: upgrade Windows 10 fails HP 8000 Elite USFF

    Got Windows Update to upgrade and decided to move to 10 Windows on a PC here in the office.  Attempted of the implemented installation of download, but it has failed, then downloaded the multimedia authoring tool and downloaded and burned to DVD a .iso for installation.  Returned to the place in the upgrade, but once again, he failed.  The message is "installing Windows 10 failed".  It is in a small white box.

    What are the options here? I tried the BIOS updates after reading that an older BIOS could be the source of the difficulties, but I can't make heads or tails of what exactly is the update of the BIOS it if there is one.  There are 5 downloads under the heading of the BIOS.

    I'm willing to do whatever I have to do to get there, but I don't know what I should try next.  I saved before allowing updates W10 and begin the process, so it's not a problem.  I can Flash the BIOS or something else if necessary, just need advice.

    Any help much appreciated

    I assume you are running Windows 7 Pro desktop 8000 Elite. If so, the latest version of the BIOS is rev 1.14 and can be recovered from http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=4065880 & swItemId = vc_156854_1 & swEnvOid = 4060

    If you download and run the Softpaq BIOS, simply follow the instructions to install and reboot

  • HP Envy 2000: upgrade Windows 10 failed, cannot recover Windows 8

    I upgraded a friends laptop to Windows 8 to 10 of Windows, installing it was downloading on partition recovery and run out of room, I created a USB key from the recovery partition and then formatted recovery disk to see if that would solve the problem. Again, I tried the upgrade, everything went very well with the upgrade until it has restarted to complete the installation, then he projected black. Then I returned to a previous version of Windows but it didn't restore properly, I used the USB recovery that I created and after a diagnosis and try a few things I finally to reset. I then tried the upgrade again after checking that everything was fine, she doesn't have to install again. Now, I can't get Windows 8, I can start Recovery USB but when I choose to update or choose to reset the PC it says it fails, I have does not have this issue before, refreshed and reset without a problem the first time, but it does not work now. I do not have and did not change anything in the whole process, just tried to upgrade, then recovered, then tried to upgrade again, now the recovery does not work.

    Any ideas?

    I solved it by running the clean command on drive C, and then he helped the method Reset PC works, then chose to repartition the disk. Completely restored by now.

  • Webcam Live mail error msg connection failed in the outgoing message

    Whenever I try to send e-mail with windows live mail, I get an error 25 and the connection failed. If I delete the outgoing msg, connects immediately. I see other people with the same problem.

    For problems with Windows Live Mail, please ask your question in the Windows Live Mail Discussion Group at: http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=microsoft.public.windows.live.mail.desktop where this product experts will be happy to help you.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Upgrade Windows 10 failed C190012F

    I post a new topic because I have simply not been able to solve these problems little matter what I tried.

    At this point, I'm thinking a clean installl, but that would require me to reinstall virtually everything (which is a LOT).

    I went through endless discussions on this issue and several other forums and tried everything without success.

    Things like:

    Delete whats downloaded and start again (I partially downloaded W10)

    Remove my HARD drive, so I only have my C SSD drive

    Start in safe mode

    Manipulation of the registry

    etc etc.

    The problem

    I have a partially downloaded W10, the rest is 2.5gig. When I download everything works fine. It restarts the operating system, but then I'm back to where I started. Download the 2.5gig repeatedly. I get this message of failure in windows update

    Fail code C190012F

    Now, I've seen this thread c190012f thread Microsoft

    you want the event logs. However I won't be playing with Live-ID.

    Also why I would replace the Secirity of security Norton, norton is much better. I can however disable for the upgrade.

    I downloaded relevant newspapers and information system

    Dxdiag and events

    Hope you can help.

    While I'm waiting, I'm going to try to continue to update windows

    Kind regards. Martin

    Hi Martin,

    Thank you for the update.

    • How do you have downloaded Windows 10?
    • How are you trying to install?

    Step 1: Download the windows 10 ISO

    Refer to the article below and download Windows 10 ISO using media creation tool.

    Download Windows 10

    Step 2: Make a USB bootable flash drive

    See section to download the Windows USB/DVD download tool to transfer the ISO on a USB flash drive to make it bootable device.

    Windows USB/DVD download tool

    Important: Ensure no data in a USB flash drive before you make it bootable device. If you have any data, save it as a result.

    Now, change the boot priority in the BIOS and then restart the computer, so it would start directly from USB/DVD.

    Important: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    I hope this helps.

  • I bought a 3 system Windows 7 upgrade and activation failed for the 3rd system. How can I fix it?

    I'm fairly certain that only 2 of the improvements have been used to move Windows 7 Vista systems. Now I try with a 3rd system, originally of XP but activation fails.

    If you have the 'Family Pack' for Home Premium, its not uncommon for that to happen. Try to activate by phone.

    How to activate Windows 7 or Vista manually (activate by phone)
    http://support.Microsoft.com/kb/950929/en-us

    1) click Start and in the search for box type: slui.exe 4
    (2) press the ENTER"" key.
    (3) select your "country" in the list.
    (4) choose the option "activate phone".
    (5) stay on the phone * do not select/press any option * and wait for a person to help you.
    (6) explain your problem clearly to the support person.
    (7) the person must give you a confirmation ID, copy it down on paper,
    (8) check that the ID is correct in reading the support person.
    (9) to enter the ID number, then click 'Next' to complete the activation process.

    ----------------------------  Alternatives -------------------------------------

    To enable the use of the phone

    1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
    then by clicking on activate Windows now. ?

    2. click on show me other ways to activate.

    3 type your Windows 7 product key, and then click Next.

    4. click on use the automated telephone and then click Next.
    If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    5. click on the location nearest you from the drop-down list, and then click Next.

    6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

    7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

    8 Note the confirmation ID the phone system gives you.

    9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

    10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

    How to contact a Microsoft Product Activation Center by phone
    http://support.Microsoft.com/kb/950929

    Microsoft Activation centers worldwide telephone numbers:
    http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
    (This site is for activating Volume License, but if you call, they will help you)

    The phone number is not working:
    Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

    Register Windows 7
    http://Windows.Microsoft.com/en-us/Windows7/help/register
    Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
    filled with tips, creative tips and other information to you help get the most out of Windows 7.
    You also get a subscription to the monthly newsletter of Windows Explorer,
    where you will find other tips and tricks, as well as special offers.

    Activation and registration of a Microsoft product
    http://support.Microsoft.com/?kbid=326851
    Windows activation: (888) 571-2048

    Learn about Activation:
    http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

    J W Stuart: http://www.pagestart.com

  • Anytime Upgrade of Windows failed

    I have windows 7 starter edition and I tried to upgrade to windows Home Premium, but when the upgrade was to halfway through she stated that the upgrade has failed. There is no error code or whatever it is that it gives you just a link to the Microsoft Web site (which is completely useless) I really want this work, then, how to fix

    Windows 7 Anytime Upgrade fails:

    If your getting the following: error: Windows Anytime Upgrade failed
    This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
    See: http://support.microsoft.com/kb/2660811

    = Other reasons and possible corrections.

    Windows Anytime Upgrade fails with the error:
    "every time that the upgrade has failed. Go online to solve the problem.
    http://support.Microsoft.com/kb/2658652

    If Anytime Upgrade still does not work:

    Shut down and restart your computer.

    Make sure that the Windows updates have been installed.

    Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

    If Anytime Upgrade still does not work, turn off the user account control:

    1. go in user accounts in Control Panel

    2 change user account control settings

    3. pull the slider to the level as low as possible

    4. restart the PC

    5. pass by the "Anytime Upgrade" as usual

    Try the following:

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Who should I contact if I have problems installing and / or activation of my product key card?

    Please contact to the: www.windows7.com/getkeysupport.

    If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

    If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
     
    HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  • a windows 7 starter edition on the old drive that I upgraded to Home Premium, got windows 7 starter again on new drive but my upgrade key keeps failing

    You can use key upgrade once, or what I need to get the latest updates to work

    Windows 7 Anytime Upgrade fails:

    If your getting the following: error: Windows Anytime Upgrade failed
    This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
    See: http://support.microsoft.com/kb/2660811

    = Other reasons and possible corrections.

    Windows Anytime Upgrade fails with the error:
    "every time that the upgrade has failed. Go online to solve the problem.
    http://support.Microsoft.com/kb/2658652

    If Anytime Upgrade still does not work:

    Shut down and restart your computer.

    Make sure that the Windows updates have been installed.

    Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

    If Anytime Upgrade still does not work, turn off the user account control:

    1. go in user accounts in Control Panel

    2 change user account control settings

    3. pull the slider to the level as low as possible

    4. restart the PC

    5. pass by the "Anytime Upgrade" as usual

    Try the following:

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Who should I contact if I have problems installing and / or activation of my product key card?

    Please contact to the: www.windows7.com/getkeysupport.

    If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

    If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
     
    HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  • The upgrade to ESXi 4.0.261974 to ESXi 4.1.0 errors with "upgrade package validation failed"

    Hello

    I'm trying to upgrade a host 4, 0.x ESXi 4.1 using the vSphere host update utility WSXi. First, it downloads the patches as expected, I select the host, and select "Upgrade of home", and then I select the file "upgrade - ESXi4.0 - to-ESXi4.1.xxxxxx.zip" I downloaded. After a while, I get the message "upgrade package validation failure (not to read the metadata of upgrade file that is located in a folder temporary users where it was unzipped to)" and the update will fail. I tried with the client installed on an XP and a box of Windows 7 with the same question, and I tried a new download without any positive result. What I am doing wrong?

    Thanks for your help.

    See if that helps

    http://blog.vmpros.nl/2010/07/15/VMware-failed-to-read-the-upgrade-package-metadata-XML-upgrading-to-ESXi-4-1/#more-2953

  • After El Capitan mail upgrade works not

    Last week I weakened and improved el Capitan. What a mistake! The operating system works very well, but the new Apple Mail app is crazy. Whenever I try to send an email, the small window that opens when you dial began to disappear and reappear - flashing "over and out" - as soon as I pressed 'Send'. He never stops. The letter does not and continues to disappear and reappear forever. I don't use icloud.

    I'm at my wit's end. What is WITH Apple Inc.? ! Impossible that they deliver a simple mail program that works every time without these terrible problems. Google does!

    I looked up solutions on Google to find these obscure and complicated solutions 'back room' I don't understand any their.

    Is there a simple solution that does not require a computer degree to understand?

    T /.

    Tdeecy,

    Follow the steps listed in: If you can not send an email in the Mail, because the window application again message disappears and reappears - Apple Support

  • Exchange 2010 upgrade to sp3 failed

    Hi all

    Please inform I am trying to install Exchange 2013, so am migrating from Exchange 2010 SP2 but a sine qua non is SP3.

    So when you try to install SP3, it fails at the level of the organization.

    Below errors

    Wow you're never in the wrong place. You want the Exchange forums in TechNet: http://social.technet.microsoft.com/Forums/en-us/category/exchange2010, exchangeserver

  • Cannot send windows live mail .can get e-mail. send repley postmaster failed

    Unable to send email.

    Hello

    The question you have posted is related to Windows Live Mail and would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the support you want.

    http://www.windowslivehelp.com/product.aspx?ProductID=15

Maybe you are looking for

  • I have a problem with my apple ID

    Initially when I bought my 6 year old odd phone Apple, I had used a specific e-mail address for my apple ID. After a few years, I stopped using the id and changed my email address to another email account. Then I changed my email address on the apple

  • Why is it harder to make a right-click on my magic mouse?

    Here is the situation. I have a magic mouse (and a wireless keyboard). Death of my MacBook Pro, if my company try it swapped for a new (but with less RAM). Before the Exchange, it was easy to make with my magic mouse right click. I would click on the

  • Windows Error VPNC3005 "unauthorized tunneling protocol" L2TP/IPSec

    I'm trying to implement a vpn L2TP/IPSec to a concentrator 3005. Everything seems to work (phase 1 completed, PHASE2 full, updated tunnel, the session began and the user is authenticated with the RADIUS) but then the tunnel fell with the message "una

  • RealtimeClockListener clockUpdated does not

    Hey. Thanks for all help people, maybe it's my last Q for quite awhile, I hope: I implemented a RealtimeClockListener like this, but the clockUpdated method does not work (initially tried to use a Timer, but my past app on startup and exits, so I nee

  • BlackBerry 8800 Smartphone, symbol of the battery with a red line through it. Does not start. Help, please!

    I recently bought a 8800 and when I inserted a battery, I got was a battery symbol with a red line through it, on a dark screen.  I changed the batteries, tried to charge it via the USB port and a wall outlet without result.  I tried cleaning the con