Mail will not work after Migration Wizard from the old to the new iMac

Similar Questions

• Acrobat will not work after CS5 moved to the new computer

  I moved my CS5 Suite, as well as the rest of my info to a new MacBook Pro, OS 10.10.4 using SuperDuper.  Photoshop, Illustrator worked immediately.  But for some reason, when I tried to launch Acrobat 9 Pro, I got an error saying that it had been installed as part of a suite and that I should launch Photoshop or another program to activate Acrobat.  I tried that several times, using PS or Illustrator, but no luck.  Has continued to get the same dialog box.

  I went to Adobe cat, and the person told me delete the Cache.db file, and then try again.  This does not work while he had me uninstall Acrobat. Given that new MacBook Pro do not have a hard drive, I copied the Acrobat disk to a flash using a laptop drive older, then that allows to install on the new machine.  Now, when I try to launch Acrobat, I get a dialog box saying "license for this product has stopped working. You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contact your administrator or Adobe... "I did once, but had the same results.  The agent told me that I have to uninstall all of the following, and then try again.

  I would like to have a different opinion here.  The agent attempted to the cat down earlier when things did not work, and I had to ask a supervisor before he agreed to continue to help.  But this last outing, he signed off I could contact support again.  Very disappointed, and now I'm suspicious regarding if uninstallation of Photoshop, Illustrator, etc. will do the trick.

  Any suggestion would be appreciated!

  Hello Allen Birnbach

  We're really sorry for the inconvenience posed for you.

  Please use the Adobe cleaning tool to remove all traces of Creative Suite on your computer:

  The Adobe Creative Cloud Cleaner tool allows to solve installation problems

  Then, download the installer for CS5 from the below mentioned link:

  Other downloads

  Let us know how it goes.

  Kind regards

  Ana Maria

• Tecra A9 - network does not work after wake up from the sleep/hibernation mode

  I have TECRA A9 and it works fine, but I found that when computer portable GB extended standby/sleep mode and after the return to work on the laptop to the network not working not.
  Keep it light, but there is no network and to solve it, I need to restart the laptop.

  Any help please.

  Kind regards.

  This is a known issue so take a look at this site:
  http://APS2.toshiba-tro.de/KB0/TSB8902FC0000R01.htm

  Updated the BIOS, and then it will work.

• Apple Software Update will NOT work after upgrading to Windows 7

  Apple Software Update will NOT work after upgrading to Windows 7

  flyboy340 wrote:

  Apple Software Update will NOT work after upgrading to Windows 7

  More information is needed.

  Which machine you use, OS X are you running?

  Windows 7 running in BootCamp?

  The OS X app store is not present at all?

  AppStore is present but the update tab does not?

• My CD-ROM/DVD-Rom drive & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.

  My readers Optiarc DVD - RW AD-7530 ATA Device DVD/CD-ROM & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.
  Although of course, the CD-ROM drive worked during the upgrade.
  I noticed that when I turn firstly on the laptop, the last two lines of the front entry from Windows 7 are the following.
  PXE - E6i:Media Test Failure, Check Cable
  PXE - MOF: Exit PXE Rom
  During the audit of each Properties in Device Manager devices", I learned that they both work correctly.  In the list in the printers and the @Devices the only Webcam shown is also a "USB 2.0 Camera"
  Can someone help me please?
  Best regards
  John

  Besides what abdelhak says:

  The message of PXE boot that you receive when you start your computer has nothing to do with your CD/DVD-Rom drive. Your computer uses a PXE boot method to attempt to load Windows from a location on your network. Since you do not have this configuration, it is safe to ignore it. If it slows down the startup time of your system, contact your manufacturer and ask them for instructions on how to "disable PXE Network Boot of the BIOS.

  Hope this helps,

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Photosmart C4280: Photosmart Essential 3.5 will not work after the Win 10 update

  The Photosmart Essential suite, which includes the scanning software will not work after the upgrade to Windows 10.   There is no message error that pop up or are listed in the event log.  Printing continues to function properly.    If the s/w is not compatible with Win 10 there the other scanning software free that I can use?

  Hello

  Thank you for using the forum.  Think that you are facing the same problems as others with Win 10 updates.

  Try this solution:

  http://h30434.www3.HP.com/T5/inkjet-printing/HP-Solution-Center-fails-to-launch-cannot-open-solution-here/m-p/5424438/highlight/true#M515792

   

  Hope that helps.

  Please click on "Bravo Thumbs up" as an encouragement and "Accept as solution" if it helped to solve your problem.

• Sleep mode will not work after sleep said she sleeps for 2 seconds then the computer boots back on its own.

  Original title: "sleep" mode

  Sleep mode will not work after sleep said she sleeps for 2 seconds then the computer boots back on its own

  Hello

  See if this information helps you, Vista and 7 work the same:

  "How to restore the default power Plan settings in Vista"

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  "How to solve a problem of Mode Vista or Windows 7 sleep"

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  See you soon.

• My norton 360 will not work after reinstalling. error 104 8504

  My norton 360 will not work after reinstalling. error 104 8504 norton crossed the settings there and said it was a problem of microsoft framework. any suggestions?

  Cannot be said with certainty, I do not use Norton, but a google found many reports like this, see - http://www.google.co.uk/search?hl=en&q=%22norton%20360%22%20%22error%208504%20104%22 for example.

  Usually like - http://community.norton.com/t5/Norton-Internet-Security-Norton/Error-8504-104/td-p/790378 or http://community.norton.com/t5/Norton-360/Norton-360-v6-Error-8504-104/td-p/672815

  If not, sorry, but after back with a little more information like the version of Norton 360, what OS W7 (starter home, home premium etc., 32 or 64-bit) and other clues that people Norton gave you as that "framework"? (For example .NET). The more information the better. So I hope someone can help.

  Good luck.

• MiFi will not work unless that plugged into the computer... Verizon no help at all it explains a vista problem... He used to work, but I think that an update did something to it and now it does not work...

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: hours on the phone with verizon... nothing is ready to throw the Verizon mifi and go to TMobile... forums looking for answers but not help there... seems a lot of people have this problem... someone at - it help him?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  A Beyschau of Annette

  Hello

  Quote: ' MiFi will not work unless plugged in to the computer.

  Where it has been plugged in before?

  If you are using to connect via Wireless, then it might be that your wireless connection has a problem.

  ----------------------------

  Wi - Fi in general.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• short cuts on the desktop for the URL will not work. Try to connect the browser when rises the address has not been transposed, it's all just white

  short cuts on the desktop for the URL will not work. Try to connect the browser when rises the address has not been transposed, it's all just white

  There may be some problems that repair tools are not picking up. It may be preferable to a repair facility. This can help with any corruption of the registry, which could happen by the deletion of these programs. http://support.Microsoft.com/kb/917964

  Keep in mind when running all that modifies the system it is always a good idea to have your data and backup programs (it's general advice for any system its always good to have a backup in case of possible failure of material/virus)

• HP 6520 will not work after changing the black ink cartridges

  Changed the cartridges and now black ink will not work. This is the second or third time only to change the cartridges - did not have a problem before, but of course, it is while the printer was still under warranty. It is now about a year and a half.

  I used all the suggested diagnosis - head cleaned, head aligned, etc, etc, etc, and nothing has helped.

  The black cartridge worked after the swap, but with a few lines do not print or missing--now produces almost nothing.

  Cartridges color was wonderful at the beginning of the troubleshooting process, but now they're starting to not look right - with spare no effort to correct the print head, he seems to be making it worse.

  Suggestions?

  @scrdagain

  I will send you a private message (departure from the envelope at the top on the right)

• I use Mac OS 10.4.11 and after downloading firefox 4.0, I get a circle + bar symbol oblique covering the logo of firefox - and it will not work after copy in my applications folder. What is the problem? Had to reinstall 3.6

  I followed the instructions on the screen to download firefox 4.0. After the launch of the dmg image in the window of firefox dmg is the symbol of firefox with a "do not go" symbol on it (for example as a sign of the universal movement for "don't go this way" - red red circle with a diagonal line). "

  Copied on ANYWAY - which was stupid - and he says: "Cannot open the application"Firefox"because it is not supported on this system."

  I couldn't find documentation saying my OS has not been supported by firefox 4.0.

  Is there away around this problem?

  Firefox 4 will not work on OS X 10.4, it requires at least OS X 10.5 and an Intel Mac.

  There is an accumulation of third party that runs under OS X 10.4 and Mac PPC, for more details, see http://www.floodgap.com/software/tenfourfox

• Windows Update service will not work after upgrading the hard drive

  I'm running Windows Vista 64 bit, Home Premium SP2 with 8 GB of ram. I recently cloned my hard drive OEM of 500 GB, 5400 RPM Toshiba MK5055GSX via a standalone, dual drive bay dock for upgrade to a 750 GB, 7200 RPM, Western Digital WD7500BPKT. Since the clone/upgrade, Service Windows Update does not work and gives the message: ' Windows Update cannot currently check for updates, because the service is not running. " You may have to restart your computer. "And Yes, I checked and everything related to Windows Update seems to be 'turned on' or well defined, but the service will not work. Notes; Windows Update still works with the player "OEM", it is only the new WD drive that has the problem. Thanks in advance for any help or suggestion on getting this problem is resolved.

  This fixes my laptop http://www.realworldrobotics.com/troubleshooting-help/windows-7-64bit/windows-update-service-not-running-after-upgrading-drive

• HP C7280 solutions Center will not work after the upgrade to Windows 7

  I was running Vista and connected the C7280 wired and wireless. The last month or so has been wireless without any problem.

  I've upgraded to Windows 7, reinstalled the driver I had, and now when I try to scan I get an error that says: "an unsupported operation was attempted" which appears twice, then I get an error that says "an invalid argument has been detected.

  A window pop up gives then a few measures to try to resolve the problem.

  I downloaded and installed the driver PS_AIO_02_Net_Full_Win_WW_130_140.exe which did not work.

  I deleted the printer of the material then uninstalled the Software Solution Center

  Driver package driver re-installed PS_AIO_02_Net_Full_Win_WW_130_140.exe C7200 and

  dot4patch_reboot.exe installed,

  Stop the printer, it unplugged for a few minutes, restarted the computer, and

  the same errors.

  The driver is a year old, and I can't find a newer version.

  Exit the:		2009-10-20
  Version:		13.1.0

  The patch is the latest of a few months, but it did not help either. " Print Patch HP software when upgrading from Vista to Windows 7

  2009-12-06, version 1.0, 1.22 M

  This Windows 7 fix corrects some of the features of the printer after upgrading Vista to Windows 7. For networked printers, go to www.hp.com for more support information.

  Any help is appreciated.

  Finally, you have this problem fixed. With the support of HP no.

  I installed the software for a HP Photosmart Premium C410 series and it fixes some problems I had with the HP Solution Center, analyses the problems in the C7280 printing software.

  Go figure...

• CS4 will not load after migration to the new imac

  I've migrated just of my older iMac to a new iMac.

  When I try to load photoshop I get an error: 150:30

  Apparently my license has been affected and is not recognized for the new computer.

  I have the CD; However, the new iMac do not have a reader of DVD player.

  Can I download it from the adobe site?  If Yes, should I completely remove my old program CS4?

  Migration does not work for the Adobe programs.  Uninstall everything first, then use the cleaning tool before installing.

  Adobe Creative Suite cleanup tool

  helps resolve installation for CS3 thru CS6 and creative cloud problems

  http://www.Adobe.com/support/contact/cscleanertool.html

  CS4 - http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html