Main memory for Tecra A11 - 11G

Similar Questions

• Re: Memory video Tecra A11 - 10 d

  Hi all

  I have a Tecra A11 - 10 d and in windows it show that my graphics card uses the 1200 MB of RAM as shared video memory. I didn't need as much memory for my graphics card, I think 256 MB is enough tacking into account that the onboard card has 64 MB of memory dedicated video.

  Now, on all computers, I know that in the bios, there is an option to set the RAM to the video card, but I don't see this option in the BIOS of my computer. I think / hope that an updated bios gives me this option. On the drivers download section I see a new BIOS, but I don't want to flash until I see the BIOS updated specifications.

  Can someone point me to such a document?
  Has anyone had this problem and resolved?

  Thank you
  Dan.

  Hello

  as I know, the video card will automatically if capture the amount allocated portable RAM. I doubt that you can make adjustments yourself. In the Bios of the Pc desktop, you can do as there is an option for the allocation of memory video card. Reflash the bios will not help you.

• Keyboard backlit for Tecra A11

  Hi people!

  I am looking for a backlit keyboard for my Toshiba Tecra A11 E19.

  Was a visionary, a product for my series? Maybe another suits you?

  Thanks for the tips.

  Best regards
  0815

  Illuminated also AFAIK Tecra A11 was not designed and delivered with keyboard so I'm pretty sure you such keyboard does not exist for this Tecra A11.

• Beginner looking for the best upgrade memory for Tecra 8000

  Hello - I am currently looking to upgrade the memory on my Tecra 8000 the current 96 of at least 256.

  Is it possible that I can't find info on 256 MB extensions that are compatible

  I also want to upgrade my hard drive of at least 20 Gb, but I think it will be easier

  Any advice would be much appreciated

  Hello

  In my opinion, you should contact the Service partner and ask them what a memory module is compatible with your laptop. I found that PC100 128 MB (PA3005U) is certainly usable for Tecra 8000.

  Please be careful because all modules may not be recognized by BIOS correctly.

  It is possible that 256 MB RAM PA3069U - 1 M 25 is compatible but I'm not sure about this. Pick up information by the Service partner before buy you one.

• Extension memory for Tecra M5 PTM50E-07H02M1D

  Hello

  Can someone tell me if memory 2 GB PC2 DDR2 (667 MHz), PA3513S-1M2G, is suitable for Tecra M5, Model No.. PTM50E-07H02M1D?

  Thanks in advance

  Hello!

  Tecra M5 can be upgraded up to 4GB with DDR2 RAM to 667 MHz.

  You can buy a RAM with these specifications of each production.

  Good bye

• Upgrade memory for Tecra CDT 550

  I have a toshiba tecra 550 CDT laptop with 64 MB of RAM.

  I want to migrate the RAM.

  Memory expansions I could install and what is the maximum size of the memory?

  Thanks for any help.
  Jochen

  Hello

  Well, as I know you can upgrade memory for max 160 MB.
  I found information on this module and it is compatible with your laptop:

  16 MB RAM Part number: PA2039U
  32 MB RAM Part number: PA2043U
  64 MB RAM Part number: PA2044U
  128 MB RAM Part number: PA2054U

  Good bye

• External audio device for Tecra A11 - 11H

  Although the Tecra A11 - 11 sound better than most laptops, I would definitely come back to the full sound quality.
  Without any audio output the possibilities seem very limited.
  USB speakers seem to be either very low powered or high-powered, expensive, or boom-box.

  My daughter, a Windows user, has one of those gadgets
  http://www.cclonline.com/product-info.asp?product_id=57743&TID=gsearch
  with its 5.1 speakers and the result is really good (and I already have the same set of 5.1 speakers, currently unused).
  The problem is of course that Creative do not cooperate with the world of SILK.

  Does anyone know of a similar product that works well with Linux?

  There is in alsa:
  EDIROL UA-1000 and UA - 101
  Tascam USB Audio/MIDI ?
  ? interfaces or controllers US-122, US-224 and US-428
  Native Instruments RigKontrol2 ?
  ? * Native Instruments RigKontrol3 ?
  ? * Native Instruments Kore Controller ?
  ? * Native Instruments Kore Controller 2 ?
  ? * Native Instruments Audio Kontrol 1 ?
  ? * Native Instruments Audio 2 DJ ?
  ? * Native Instruments Audio 4 DJ ?
  ? * Native Instruments Audio 8 DJ ?
  ? * Native Instruments Guitar Rig Session IO?
  ? * Native Instruments Guitar Rig mobile ?
  ? * Native Instruments Traktor Kontrol X 1
  all this must work well...

• Upgrade memory for Tecra A5

  Hello, if anyone can help, I would be very grateful.

  I have a Tecra A5 that I bought a few years ago and recently it has become quite slow. On the suggestion of a colleague, I rebooted the machine, remove a lot of unused programs and it seems to have improved.

  However, I would like to upgrade the RAM. Currently, the task manager tells me I have 1 GB of available, and I read that the Tecra A5 can handle 2 GB, which seems likely to boost performance.

  However, looking at the manual and at the bottom of the laptop, it only seems to be a slot to expand memory. Looking at websites selling RAM upgrades, there only seems to be 128, 256, 512 and 1024 MB memory upgrades.

  Here's the question. Should I buy two memory upgrades 1 GB (and if so, where did I put the other?)

  I have a feeling that when I bought the laptop, the seller has provided two upgrades memory of 512 MB.

  Thanks for any advice on this.

  You are right. Your Tecra can be upgraded up to 2 GB. Compatible RAM module has PA3313U-2M1G part number. Are you a location is available downstairs?
  This old Tecra is unknown to me, but what I do know, is that all laptops with a RAM slot at the bottom have an another slot memory under the keyboard.

  If you want to have full access to this slot machine, you must remove the keyboard.

• Compatibility of memory for Tecra A8

  I just got a new Tecra A8 as a replacement for a broken Qosmio. Can someone tell me if I have the chip memory SoDimm 1 GB that I took on my old qosmio G10 is compatible with my new machine? Looks like it should be, but does not seem to want to place - click the 'groove' is about 1 mm in the wrong direction.

  The part number is PA3313U-2M1G, who seems to have been replaced after less than a year! I'll be more annoyed if I buy * an * upgrade.

  According to specification older Qosmio use module 333 MHz (PC2700) and Tecra A8 has (PA3411U-2M1G) DDR2 667 MHz 1 GB memory module. I googled a bit and Tecra A8 is not listed as compatible portable model for this RAM.

• Tecra A11 - cannot start the BIOS update

  Hello

  I downloaded the latest update of the Bios B2.50 - EC1.80 for Tecra A11-127 (PTSE0E. Wenn I start installing, an error occurs: "this computer is not supported", but my laptop is an A11-127 with Partnumber PTSE0E, why it doesn't work?

  Why is he not possibel to download an old Version of the Bios?

  JSpindler

  Hi jspindler,

  The question is why you want to update the BIOS? This update should be carried out only if it of really necessary. In addition, only the most recent update of the BIOS can be downloaded as it fixes most problems.

  In any case, you need to start the BIOS as an administrator and you should decompress all files from zip archive before start you. Also, make sure that the value added package is installed.

  By the way: what operating system is installed?

• Need driver 'Wifi' for my Tecra A11 - 1 9

  Hello

  I have a Toshiba Tecra A11 - 1 9 PTSE1E.

  I need the wifi driver and can not find. The Web of Toshiba site does not recognize my computer with serial number.

  I need help, thank you.

  If you can't find the drivers by using serial number please look for it manually.
  All the drivers, tools and utilities that you can find on http://www.toshiba.eu/innovation/download_drivers_bios.jsp
  I can't get it for you because I do not know what operating system you are using.

• Tecra A11 - 005 00K for SCCM OSD mass storage driver

  I need to know the Tecra A11 mass storage driver so that I can laydown XP WIM of images using the SCCM task sequence. Well, any help would be appeciated.

  I tried the driver Intel ESB2 SATA AHCI Controller but need the correct model in the pilot. (IE. Intel ICH7R/DH SATA AHCI Controller)

  Thank you

  You can get the provider and the device for me id?

  You can get this by going to your device manager, the device in question, right-click, select Properties, click details and select the hardware ID from the drop-down...

  copy beyond what is inside of her and post here and I'll see what I can do...

• Tecra A11 for PA3508E-PRP1 (Express Port Replicator)?

  The Express Port Replicator PA3508E PRP1 can be used with Tecra A11? Given all that I have read the answer would be no, or Advanced Port Replicator or Express Port Replicator II would be necessary. But the port replicators are very similar on the upper side (connectors). Perhaps it is an old item that no one it lists as compatible more precisely?

  is that you must use compatible devices only with laptop Tecra yout and according to specification for your Tecra A11, you can use Express Port Replicator II with PA3680E-1PRP part number.

  This port replicator is designed for latest Tecra and Portege laptop models.

• Need recovery disk or recovery for my Tecra A11 image

  I have a Toshiba Tecra A11 and had a problem with the operating system, so a friend offered to fix it for me, when he said fix what it meant try and install completely wrong Windows 7, but at the same time destroy the removal of the partition, all built in Windows 7 pro installation.

  So now I need a file or a CD specific boot to a USB key. Anyone know where I can get one or download one without having to pay 35 quid for a new Toshiba?

  Thank you
  Tom

  Recovery file cannot be downloaded. Toshiba offer as only recovery disk. Download an iso file won't help you much because you will not be able to start the recovery image installation.

  Either you find someone who has the same Tecra and use its disk or you must order one on https://backupmedia.toshiba.eu/landing.aspx

• Tecra A11 - 11 H - drivers for Windows XP 64-bit

  Hello

  is - anyone know where to find the driver for the wireless card of Tecra A11 - 11: using Windows XP 64 bit, does anyone have a complete list of the hardware models Tecra A11 - 11: using as toshiba support website is not driver for Windows XP 64-bit.

  Thank you very much

  Hey Buddy,

  Windows XP 64-bit is not supported by Toshiba, there is no drivers for this OS. The 64-bit version of XP was not very popular then, probably, you will find all the drivers on external pages. If you want XP I recommend the 32-bit version or Windows 7 professional who has an XP virtualization mode.

  Tecra A11 - 11: 00 a WLAN Intel card in order to check the Intel page directly. Maybe you can find a driver: [www.intel.com]

  In addition, if you install a hardware such as Everest or PC Wizard 2011 diagnostic tool you can check the installed hardware and so you can search for drivers yourself.

  But as I wrote already: choose another OS ;)