Main Office XP problem
If your XP desktop is giving you problems. Number 1 thing to check is the power supply. The power supply is designed to not work so many thousands of hours. My XP computer made me think of viruses, disk hard ect. Finally checked and found power + 12V to + 9 Volts. It works, but it's not fair. fix of $ 60 million.
Seems that most of the problems on this forum is feeding problems. Headache for all
Tags: Windows
Similar Questions
-
Establish a IPsec VPN connection, but remote site can't ping main office
Hi, I set up connection from site to site IPsec VPN between cisco 892 (main site) router and linksys router wrv210 (remote site). My problem is that I can ping network router wrv210 lan of my main office where is cisco 892 router, but I cannot ping the main site of linksys wrv210 lan (my remote site).
My configuration on the cisco 892 router:
type of class-card inspect correspondence sdm-cls-VPNOutsideToInside-1
game group-access 103
type of class-card inspect correspondence sdm-cls-VPNOutsideToInside-3
game group-access 106
type of class-card inspect correspondence sdm-cls-VPNOutsideToInside-2
game group-access 105
type of class-card inspect correspondence sdm-cls-VPNOutsideToInside-5
game group-access 108
type of class-card inspect correspondence sdm-cls-VPNOutsideToInside-4
game group-access 107
type of class-card inspect correspondence sdm-cls-VPNOutsideToInside-7
group-access 110 match
type of class-card inspect correspondence sdm-cls-VPNOutsideToInside-6
game group-access 109
type of class-card inspect correspondence sdm-cls-VPNOutsideToInside-9
game group-access 112
type of class-card inspect correspondence sdm-cls-VPNOutsideToInside-8
game group-access 111
type of class-card inspect entire game SDM_AH
match the name of group-access SDM_AH
type of class-card inspect entire game SDM_ESP
match the name of group-access SDM_ESP
type of class-card inspect entire game SDM_VPN_TRAFFIC
match Protocol isakmp
match Protocol ipsec-msft
corresponds to the SDM_AH class-map
corresponds to the SDM_ESP class-map
type of class-card inspect the correspondence SDM_VPN_PT
game group-access 102
corresponds to the SDM_VPN_TRAFFIC class-map
type of class-card inspect entire game PAC-cls-insp-traffic
match Protocol cuseeme
dns protocol game
ftp protocol game
h323 Protocol game
https protocol game
match icmp Protocol
match the imap Protocol
pop3 Protocol game
netshow Protocol game
Protocol shell game
match Protocol realmedia
match rtsp Protocol
smtp Protocol game
sql-net Protocol game
streamworks Protocol game
tftp Protocol game
vdolive Protocol game
tcp protocol match
udp Protocol game
inspect the class-map match PAC-insp-traffic type
corresponds to the class-map PAC-cls-insp-traffic
type of class-card inspect correspondence sdm-cls-VPNOutsideToInside-10
game group-access 113
type of class-card inspect all sdm-service-ccp-inspect-1 game
http protocol game
https protocol game
type of class-card inspect entire game PAC-cls-icmp-access
match icmp Protocol
tcp protocol match
udp Protocol game
type of class-card inspect correspondence ccp-invalid-src
game group-access 100
type of class-card inspect correspondence ccp-icmp-access
corresponds to the class-ccp-cls-icmp-access card
type of class-card inspect correspondence ccp-Protocol-http
match class-map sdm-service-ccp-inspect-1
!
!
type of policy-card inspect PCB-permits-icmpreply
class type inspect PCB-icmp-access
inspect
class class by default
Pass
type of policy-card inspect sdm-pol-VPNOutsideToInside-1
class type inspect sdm-cls-VPNOutsideToInside-1
inspect
class type inspect sdm-cls-VPNOutsideToInside-2
Pass
class type inspect sdm-cls-VPNOutsideToInside-3
Pass
class type inspect sdm-cls-VPNOutsideToInside-4
Pass
class type inspect sdm-cls-VPNOutsideToInside-5
Pass
class type inspect sdm-cls-VPNOutsideToInside-6
inspect
class type inspect sdm-cls-VPNOutsideToInside-7
Pass
class type inspect sdm-cls-VPNOutsideToInside-8
Pass
class type inspect sdm-cls-VPNOutsideToInside-9
inspect
class type inspect sdm-cls-VPNOutsideToInside-10
Pass
class class by default
drop
type of policy-map inspect PCB - inspect
class type inspect PCB-invalid-src
Drop newspaper
class type inspect PCB-Protocol-http
inspect
class type inspect PCB-insp-traffic
inspect
class class by default
drop
type of policy-card inspect PCB-enabled
class type inspect SDM_VPN_PT
Pass
class class by default
drop
!
security of the area outside the area
safety zone-to-zone
zone-pair security PAC-zp-self-out source destination outside zone auto
type of service-strategy inspect PCB-permits-icmpreply
zone-pair security PAC-zp-in-out source in the area of destination outside the area
type of service-strategy inspect PCB - inspect
source of PAC-zp-out-auto security area outside zone destination auto pair
type of service-strategy inspect PCB-enabled
sdm-zp-VPNOutsideToInside-1 zone-pair security source outside the area of destination in the area
type of service-strategy inspect sdm-pol-VPNOutsideToInside-1
!
!
crypto ISAKMP policy 1
BA 3des
md5 hash
preshared authentication
Group 2
lifetime 28800
ISAKMP crypto key address 83.xx.xx.50 xxxxxxxxxxx
!
!
Crypto ipsec transform-set ESP-3DES esp-3des esp-md5-hmac
!
map SDM_CMAP_1 1 ipsec-isakmp crypto
Description NY_NJ
the value of 83.xx.xx.50 peer
game of transformation-ESP-3DES
match address 101
!
!
!
!
!
interface BRI0
no ip address
no ip redirection
no ip unreachable
no ip proxy-arp
penetration of the IP stream
encapsulation hdlc
Shutdown
Multidrop ISDN endpoint
!
!
interface FastEthernet0
!
!
interface FastEthernet1
!
!
interface FastEthernet2
!
!
interface FastEthernet3
!
!
interface FastEthernet4
!
!
interface FastEthernet5
!
!
FastEthernet6 interface
!
!
interface FastEthernet7
!
!
interface FastEthernet8
no ip address
no ip redirection
no ip unreachable
no ip proxy-arp
penetration of the IP stream
automatic duplex
automatic speed
!
!
interface GigabitEthernet0
Description $ES_WAN$ $FW_OUTSIDE$
IP address 89.xx.xx.4 255.255.255.xx
no ip redirection
no ip unreachable
no ip proxy-arp
penetration of the IP stream
NAT outside IP
IP virtual-reassembly
outside the area of security of Member's area
automatic duplex
automatic speed
map SDM_CMAP_1 crypto
!
!
interface Vlan1
Description $ETH - SW - LAUNCH INTF-INFO-FE 1 to $$$ $ES_LAN$ $FW_INSIDE$
IP 192.168.0.253 255.255.255.0
no ip redirection
no ip unreachable
no ip proxy-arp
penetration of the IP stream
IP nat inside
IP virtual-reassembly
Security members in the box area
IP tcp adjust-mss 1452
!
!
IP forward-Protocol ND
IP http server
local IP http authentication
IP http secure server
IP http timeout policy slowed down 60 life 86400 request 10000
!
!
IP nat inside source overload map route SDM_RMAP_1 interface GigabitEthernet0
IP route 0.0.0.0 0.0.0.0 89.xx.xx.1
!
SDM_AH extended IP access list
Note the category CCP_ACL = 1
allow a whole ahp
SDM_ESP extended IP access list
Note the category CCP_ACL = 1
allow an esp
!
recording of debug trap
Note access-list 1 INSIDE_IF = Vlan1
Note category of access list 1 = 2 CCP_ACL
access-list 1 permit 192.168.0.0 0.0.0.255
Access-list 100 category CCP_ACL = 128 note
access-list 100 permit ip 255.255.255.255 host everything
access-list 100 permit ip 127.0.0.0 0.255.255.255 everything
access-list 100 permit ip 89.xx.xx.0 0.0.0.7 everything
Note access-list 101 category CCP_ACL = 4
Note access-list 101 IPSec rule
access-list 101 permit ip 192.168.0.0 0.0.0.255 192.168.7.0 0.0.0.255
Note access-list 102 CCP_ACL category = 128
access-list 102 permit ip host 83.xx.xx.50 all
Note access-list 103 CCP_ACL category = 0
Note access-list 103 IPSec rule
access-list 103 allow ip 192.168.7.0 0.0.0.255 192.168.0.0 0.0.0.255
Note access-list 104 CCP_ACL category = 2
Note access-list 104 IPSec rule
access-list 104 deny ip 192.168.0.0 0.0.0.255 192.168.7.0 0.0.0.255
access-list 104. allow ip 192.168.0.0 0.0.0.255 any
Note access-list 105 CCP_ACL category = 0
Note access-list 105 IPSec rule
access-list 105 allow ip 192.168.7.0 0.0.0.255 192.168.0.0 0.0.0.255
Note access-list 106 CCP_ACL category = 0
Note access-list 106 IPSec rule
access-list 106 allow ip 192.168.7.0 0.0.0.255 192.168.0.0 0.0.0.255
Note access-list 107 CCP_ACL category = 0
Note access-list 107 IPSec rule
access-list 107 allow ip 192.168.7.0 0.0.0.255 192.168.0.0 0.0.0.255
Note access-list 108 CCP_ACL category = 0
Note access-list 108 IPSec rule
access-list 108 allow ip 192.168.7.0 0.0.0.255 192.168.0.0 0.0.0.255
Note access-list 109 CCP_ACL category = 0
Note access-list 109 IPSec rule
access-list 109 allow ip 192.168.7.0 0.0.0.255 192.168.0.0 0.0.0.255
Note access-list 110 CCP_ACL category = 0
Note access-list 110 IPSec rule
access-list 110 permit ip 192.168.7.0 0.0.0.255 192.168.0.0 0.0.0.255
Note access-list 111 CCP_ACL category = 0
Note access-list 111 IPSec rule
access-list 111 allow ip 192.168.7.0 0.0.0.255 192.168.0.0 0.0.0.255
Note access-list 112 CCP_ACL category = 0
Note access-list 112 IPSec rule
access-list 112 allow ip 192.168.7.0 0.0.0.255 192.168.0.0 0.0.0.255
Note access-list 113 CCP_ACL category = 0
Note access-list 113 IPSec rule
access-list 113 allow ip 192.168.7.0 0.0.0.255 192.168.0.0 0.0.0.255
not run cdp
!
!
!
!
allowed SDM_RMAP_1 1 route map
corresponds to the IP 104
--------------------------------------------------------
I only give your router cisco 892 because there is nothnig much to change on linksys wrv210 router.
Hope someone can help me. See you soon
You can run a "ip inspect log drop-pkt" and see if get you any what FW-DROP session corresponding to the traffic you send Linksys to the main site. Zone based firewall could be blocking traffic initiated from outside to inside.
-
Open applications automatically to the left of the main office
Hello world!
I am looking for a way to automatically open to the left of my main office applications in OSX El Capitan. The ideal scenario would be to automatically open one of them in this configuration at startup.
It's also nice to make the app go whenever it is open!
In my view, it is possible to be reached using Apple Script, but I couldn't find the necessary blocks around forums.
Can someone help with directions to the solution?
Thanks ():
AppleScript would complicate things (I think that GUI scripts would be required to switch to a specfic desktop computer), but:
You can select applications that are configured to open, each time that you log on your computer, follow the link:
OS X El Capitan: items open automatically when you connect
Mission Control allows you to add several desktops, if you need it, follow the link:
Use the control mission on your Mac - Apple Support
And, you can assign an application to a specific office, please follow the link:
-
(desktop) computer main and two other laptops running windows xp
all computers are connected to a common wireless network
two external hard drives are connected to the main computer
No laptop computer connected to the wireless network will recogniae
external hard drives
the hard drives are configured as shared
What version of XP (Home, Pro, Media Center) and what service pack is installed?
If you have XP Pro or XP Media Center, is simple file sharing on or off?
Can you share other files and printers among the 3 computers?
You try to share the directory root of the external drives (for example, E:\ and F:\)? Note that "computer administrators can only share the root of the drive. See http://support.microsoft.com/kb/304040
All computers are in the same subnet? On each computer, open a command prompt window and type
ipconfig {press Enter}You will see something like this (if the office is wired rather than wireless, the output so that it will display something like 'Card Ethernet connection to the Local network'):
Ethernet adapter wireless network connection:
Connection specific DNS suffix. :
... The IP address: 192.168.1.102
... Subnet mask: 255.255.255.0.
... Default gateway. : 192.168.1.1.All 3 computers should have the identical "default gateway". Each computer must have an IP address that has the same 3 initial bytes as the default gateway. In the example above, this means that everyone should have an IP address that resembles 192.168.1.xxx.
See this old but still relevant to old MS MVP Malke networking advice:
File sharing / print
Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:
http://TechNet.Microsoft.com/en-us/library/bb727037.aspx
For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).
Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.
A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus with "Internet Worm Protection" (like Norton 2006/07) which acts as a firewall, you're fine. With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.
(B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.
C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this. The instructions on this link work for XP and Vista:
Set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm
D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).
E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.
F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.
-
You need 2 TB 2nd hdd on Pavilion hpe h8 - 1380t so I can clone main drive. Problems?
I need to spend my second hdd to a 2 TB drive, so I can clone main drive. Are there compatibility issues, that I need to know?
It should not be. A 2 TB drive is an option on this model. If it will not be the main disk where the OS is installed, then the only real problem in that you should have to run is to find an additional SATA cable.
-
Error in Update window 7 646 with office updates problem
I was see this problem a lot and recently one of my friends started having this problem after doing a new install of Windows 7 home what is causeing this issue with the office 2007 updates so far I had to manully get downloads and install them that starts to become annoying now is there a fix for this problem that seems monitoring Windows vista to Windows 7?
You may have missed: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e716883-7af4-4a9f-8665-2f4dd57eee8d ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Update WIndows 7 Office 2007 problems
I am usng Windows 7 Ultimate and Office 2007 Enterprise, and whenever I try to install updates for Office 2007, I get "WindowsUpdate_00000646" "WindowsUpdate_dt000"
Also, when I try to update manually, I get 'and not the expected version '.
Any help would be welcomeHello
References to Vista also apply to Windows 7.
Try this 1st to see if it helps, and it should:
Description of the Patch registration cleanup tool
http://support.Microsoft.com/kb/976220/------------------------------------------------------
If necessary :
Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
or the update itself - double click a view more information (or click top then discovers on the right)Those who will take you to a page where you can download the update.
Or go here and the KBxxxxxx number to download it.
Download Center - mount the KBxxxxxx.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to where you put them - click on - RUN AS ADMIN
Then you can right click on the update in the updates Windows and HIDE.
If you get an error Installer install this version:
Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en----------------------------------------------------
Then run this:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821------------------------------------------------------------
Because these are all Office updates you might get more information if necessary in the Agency of those groups that
may have experienced the same problem.Office newsgroups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspxMicrosoft.public.office.misc discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us------------------------------------------------------------
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Registration code - class main absent signature problem
My boss bought a blackberry online certificate signature code and we have received a set of .csi there are files by e-mail, with the following instructions:
The following attachment will allow the BlackBerry SignatureTool to register with the Signing Authority. Please ensure that the BlackBerry Java Development Environment or BlackBerry Java Development Environment Component Package has been installed onto the workstation that will be used to sign your BlackBerry Java applications. To register the attachment, please follow the instructions below: 1) Double-click on the attachment
Double click on the files just gives error message box at the following address:
Java Virtual Machine Launcher: "could not find the main class. Program will exit! »
I have installed 4.7.0.41 JDE, have also tried to install the 4.6.1 components.
JRE is 1.6.0_11 - b03
Thank you
Lindsay
I remember that the problem might be the version of JRE, try to uninstall JRE 1.6 and install JRE 1.5 (included in the JDK 1.5)
If it won't help contact [email protected]
-
To access the branches connected to the main office using VPN L2L by RA VPN
Hi all
I am trying to configure access to several remote sites for users that VPN in our main data center. The data center has a 5520, and branches are connected via L2L IPSec VPN. All branches have 5505 or 5510. Remote users use IPSec via the remote Client to Cisco. In our data center works and L2L VPN remote access are perfect... only now that I need remote users access to branches
after remote access VPNing (of support), I can't work the part.
Any help would be appreciated!
Thank you
Vpn client access management office subnet via the main ASA site, you must configure the following:
(1) If you have split tunnel, it must include the branch subnet in the tunnel of split ACL.
2) allow to "permit same-security-traffic intra-interface" on the main ASA site.
(3) configure the pool of the vpn client subnet in the lan-to-lan tunnel to the branch.
On the main site, crypto ACL to one of the branch should say:
ip licensing
On the site of the Directorate, crypto ACL to the main site should say:
ip licensing
(4) on the site of the Directorate, should also include NAT exemption between the branch subnet to the pool of the vpn subnet.
(5) after all the changes above, you need to clear the tunnel, so the ipsec lan-to-lan tunnel recover with the new subnet included.
Hope that helps.
-
Windows 7 Internet on the main office/main screen being blocked please help
For some reason any Windows 7 does not allow programs download from the internet. Programs (Adobe Digital & OverDrive Media are the two main) used to be able to download, but they no longer work. I've placed on the green list to come through the fire wall and I'm not running on a proxy server. I'm at a loss as to why he worked for years and now he's no longer. I tried the two patches that were given for both programs and nothing has worked. For Overdrive Media I get the answer that it is not connected to the internet and to digital Adobe, I get a different error that I looked and it said that the program could not through the firewall, changed cela setting and still have the same error. I also used to get the tab accu-weather on the top of the scree, but now he tells me that I am not connected to the internet. But clearly, I am as I am typing this question. Even gadgets that provides windows that can be placed on the main screen, like a clock and weather report that they are unable to connect to the server, that's why I think that it is not the firewall that is causing this problem I tried to disable the firewall and Windows program and I still have the same question. We did not have any changes made to our Web server or provider and the internet seems to work fine as well. I have also just finished a computer virus scan to determine if there is a problem here and nothing came. I tried to unplug the router to reset my IP address and that did not help. Any suggestion would be great.
Thanks in advance for any help
See you soon
Janine
Oh also note, my utorrent program does not seem to have any get what throughoh transmitter and the main provider of internet if I use Firefox.Hello
A lot of programs in a Windows 7 computer that depends on the connection to the internet are controlled by settings of Internet connection in the computer. We can access these settings by going to Internet Options of Internet Explorer.
You can check if your Internet Explorer is set to work offline?
You can check that by following these steps:
1. open Internet Explorer.
2. Once Internet Explorer is open, press Alt and F together on your keyboard keys.
3. make sure that the work offline option is not selected in the drop-down menu that appears.
If your problem is still there, you can check these settings once:
1. press the Windows and R keys on your keyboard to open the run box.
2. in the run box, type inetcpl.cpl and press enter on your keyboard. This should open the Internet Properties dialog box.
3. click on the connections tab.
4. then click on LAN settings.
5. make sure, none of these options in the local network settings are selected. If none of these three options have been selected, please deselect the and click OK.
Now please check whether or not your gadgets and other programs that had the issue work.
I hope this information helps you. Please respond with the status of the issue so that we can help you further.
-
BlackBerry Smartphones BB 8130 address book and Office Mgr. problems.
I have a BB 8130 with V. 4.5.0.66 software and use BB Desktop Manager V. 4.6. I have been using this combination for several weeks now.
A couple of days, I tried to access my address book and all of a sudden it says it's empty. If I try to use Desktop Manager, it never sees the phone even if my computer knows it's there as soon as I plug in the cable.
If I try to send a text I have to enter the number manually, but as soon as I do and it goes to the screen where I can enter the text, it shows the name of the person that I enter the number.
If I type a 'B' of the main homepage it evokes all the ads of 'B', and I can dial any number in the list of names and numbers. It's as if the info is there in the address book and yet it still says it's empty when I try to open the address book.
I pulled the battery 2 times or 3 and nothing changes when it starts up.
Can someone help me with this problem?
Thanks for any help you can provide.
On your BB, open the address book > Menu > filter and uncheck the boxes checked.
Now, check the address book again. A little luck?
-
Oracle IRM Office synchronization problem &; archive
Hello
I installed IRM 11g desktop and trying to connect it to my IRM 11g server. Sometimes it connect, but unable to show context while sealing. Even on restarting the server & reinstall the Office of MRI, its does not work.
Y at - it a bug in Office of MRI or problem with my setup?
I use * "http://172.17.202.121:16100 / irm_desktop" * as my URL of the server. I put the same thing in Enterprise Manager for MRI.
I am able to connect and Synchronize & Irene succesfully from other computers on the LAN.
Can someone understand where is the problem?
Concerning
Vishal Anand
Published by: 843607 on March 15, 2011 23:03Clear credentials in this office. To do this, open the options panel in double-cliocking MRI systray icon. Click the servers tab then select your server. This should allow the clear password button. Click on the button.
After that, try sealing. You should be prompted to authenticate - unless you use Windows NT authentication?
Frank.
-
Hello
I have a problem with my main toolbar in the designer of forms and reports. After the installation it always refreshing all the icons very slow - you can see how each icon is refreshing. It takes place every time when you do something in the designer - open canvas, pl/sql code etc.. When I run report form result works fine, the problem only occurs in the designer. Any idea?Some things to try:
-set the working directory for your shortcut forms in a local directory
-Check the registry (HKEY_LOCAL_MACHINE/Software/Oracle /) for network drives
-try to start your generator of forms with disconnected network. -
Office files problem - please help
Hello world
So I have an iMac 2012 27' office and all the files on my desktop won't seem to load when I click on them. Sometimes the window, but the files are not visible. Also, it freezes and does not allow me to close this window. If I raise my finder, these files will appear. I have to restart each time so that a file appears. I also now notice that I try to copy a file to another folder on my desktop I get the spinning wheel for a while and that he blames the image of the copy of the file when I drag it. When I create a new file on the desktop, the image of this file does not appear. But once I raise the finder, it does. Very strange.
I downloaded a song from iTunes (don't know if that's what caused it) before the start of these questions.
All my software and iTunes are up-to-date.
Can anyone help because it is a work computer and I can not really afford to be without it.
Thanks gang.
To find out if it's the scale of the system or a specific user, try this...
Open system preferences > users and groups, unlock it, click the "smaller", make a new admin account, log on & into the new account.
It works in the new account?
-
Satellite click on mini - Microsoft Office Access problems
I just bought this mini satellite click have registered and installed Microsoft office 365, BUT I can't figure out how to get, how to get a menu which shows the programs on the computer so that you can (a) open to them and use them, and (b) put a shortcut on the desktop.
PS. I'm a long-time Mac user and am lost on a PC.Go to the Windows start screen. Scroll down and you will find listed programs, including Office.
Maybe you are looking for
-
I created a new password. It brought me to this screen. Am I guess that something else. Thank you
-
Repair under warranty in India
I'm from my laptop United Kingdom and me are in India. I triggered a rift with Toshiba, it has taken to the service center in Delhi, they said it was full of dust and just installed real player and went on live messenger etc. I call Toshiba again to
-
I need motherboard for Satellite A100-599
I need a motherboard (V000068860) to Toshiba A100-599. I can't find any MB on ebay. Where can I find this item? You know of any sites with toshiba parts?
-
HP 500K6V69AV: Dual Boot
This HP 500 desktop computer was purchased new directly on the website of HP and delivered may 7, 2015. There is no other choice for Windows 7 Pro, so I accepted the default win 8.1 64 bit. My intention was to use a previously purchased 240GB SDD c
-
Connection Internet grave computer recovery
Hello. I bought a Veriton X4620G last year and it works great. There is only one thing that bothers me. The internet connection drops when the computer sleeps. When I woke up it I have to click several times on the network icon in the toolbar rec