main volume of clip volume vs

When I apply a limiter, the volume of the video clips but the volume does not work. I don't hear any sound distortion (I use only my iMac speakers...). Is this right? What happened when clip is "yellow"?

Rely on the counters, not the waveforms.  Waveforms are a general representation, is not that precise.  The level of a simple clips is specific level of this clip.  But, when you have other clips playing at the same time, even if they are all limited to the same peak decibel level, the overall volume will increase.  Audio is cumulative, as in a source at-6 dB is - 6db.  Two clips at-6 DB will be around in 3db(-ish) or in this neighbourhood.  So if you have two or more audio sources playing at once, the two must be pulled down a bit below what you want the Pb of the resulting overall to be art.  Also, for some reason, I find the limiters within FCPX to act oddly, unlike what is happening inside Logic Pro and other audio applications that use Audio plugins.

Tags: Professional Applications

Similar Questions

  • Main volume changes of levels with noise levels of the music/videos

    My main volume change volume everytime I listen to what it is video/music with the volume or the softness of music video and possibly up to 0. It's basically alleviate other sounds on my computer but I never manually changed anything and may not know how to solve this return to normal. Help, please!

    Hi Mtyre4269,

    Method 1: Run the fixit available in the link below and check

    Diagnose and automatically repair audio playback problems

    http://support.Microsoft.com/mats/NO_SOUND

    Method 2: Put the computer to boot and then check if the problem persists

    Follow step 1 in the link below,
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

    Continue with the remaining steps to pin-point on the third party service.
    After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

    Important: n ' forget not to put the computer to follow normal start-up step 7 in the link.

    Thanks and greetings
    Ajay K

    Microsoft Answers Support Engineer
    ***************************************************************************
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Is there a way to make the snap windows volume mixer all volume of requests to match the main volume?

    I noticed that windows likes to change my settings of volume for some applications, probably in an effort to help me, but it seems to create more problems than it prevents. For example, when I start a game, my itunes volume is lowered. The way I calculate it, this often leads to a variety of different volume levels for different applications after awhile, and if I turn up the volume with my volume key (which increases the overall volume) they only rise proportionally. So if the volume of Chrome is 50% and iTunes' volume is 10% and I increase the volume to maximum, iTunes volume only goes up to 20%, forcing me to manually open the mixer volume and level everything. I noticed the overall volume take a gray line in the whole of the mixer, is there a way to force all applications to align on this gray line and does not move unless I change myself in the mixer? Uncheck everything in the volume control options didn't fix it.

    Thank you.

    The way I did earlier was to move all the sliders up to 100% (look at your ears, however, if you have headphones on - the "bong" sound system is going to be quite noisy!).  After that I did, all volume settings have been aligned on the line grey and synchronized with the master volume.

  • How to reduce the volume of output

    I hope I can explain my question correctly... IM editing a video on my laptop, the volume on my computer is as low as I can go. I use headphones and the volume is still too strong and starting to hurt my ears are an extended period. Is there a way to simply turn down the volume of production in the body? I don't want to lower the volume or gain of each clip. Thank you

    Solution of prejudice will reduce the actual volume of the media, including exports.  From your post, I got the impression you wanted to just turn down the volume when editing.

    There is no way to do this in Premiere Pro.  It is made out by the volume of the speaker or the main volume of the computer.  Because this goes all the way up to dumb, it's just not possible that you have the volume turned down and it is still too strong.

    Then it turns more.

  • A problem of speaker and silence at the master volume

    Hi I have a problem with the speaker. I can't hear the voices, with the earphone.there are a Mute check at the front, rear, subwoofer in the main volume. The microphone does not work as well. In the Control Panel, sound devices seems OK.

    Hello Tukangcomputer,

    Thank you for your message.  We will ensure that you have the latest audio driver for your computer.  Go to the website you computer manufacturer and download/install the latest audio driver for your device.
    Please let us know if this is or is not to solve your problem.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • How can I record audio programs that run through Windows 7 on the sound recorder? Where is the master volume.

    How to record audio programs in windows 7? -in previous versions of windows, I could use the main volume control to select "wave" and that way save audio playing on other programs playing through windows and using windows as a simple sampling devicem - I have a relatek 11 hd audio device/card's directx - in audio devices ControlPanel / / / / material/sound/manage / I see only selection of recording for the microphone or line - how can - record sound through windows 7 - can I buy a cable and put it in the headphone and microphone - I'm trying to address the problem in a way that is now not in windows - I want to play things and recording in a small way - could you provide an answer on how audio intgrates of hardware and software with windows - I can't believe really wanting I could do on the previous windows versions - please help

    Start - All Programs - Accessories - Sound Recorder will launch the utility. You can easily find it by running aid and entering "sound recording."

    Right click the speaker icon in the system tray, select recording devices and set the desired default entry.

  • Buttons of passport camera blackBerry - much too strong and necessary to decrease the volume

    The volume of the tone to hit the keys behind doors closed to take a photo or a video start and end is up and I want to lower.  The volume at settings-> main Volume control has no effect.  There is no volume for buttons in camera setting and the user manual does not address this issue directly.  I spent a few hours searching forums and site Web de Blackberry and can't find answers.

    Could someone tell me please how to turn down the volume button in camera?  I prefer not to distract or startle a room full of people, when I want to take pictures or video.  Thanks in advance!

    NSwanson wrote:

    The volume of the tone to hit the keys behind doors closed to take a photo or a video start and end is up and I want to lower.  The volume at settings-> main Volume control has no effect.  There is no volume for buttons in camera setting and the user manual does not address this issue directly.  I spent a few hours searching forums and site Web de Blackberry and can't find answers.

    Could someone tell me please how to turn down the volume button in camera?  I prefer not to distract or startle a room full of people, when I want to take pictures or video.  Thanks in advance!

    Switch to Silent Mode.

  • Volume Q5 ringtone for blackBerry

    I have a Q5, model SQR100-1, 10.3.2.2474 OS

    I would like to adjust the volume of the ringer specifically for the phone.  Is this possible?  Thank you.

    Ross

    Hello

    Yes...

    Settings > Notifications

    Slide the switch to ringtone for the volume you want.

    You can from this screen, select each profile and in those put in different volumes for the ringer for each profile, which will replace the first main volume control.

    Good luck!

  • BlackBerry Z10 more low volume low enough

    Has anyone else noticed that the the lower volume for listening to music with headphones is not low enough?  I want the possibility of lowering one or two steps more silent, but it does go OFF from the level low.

    I was hoping that the main volume control was a master, but it seems to be the exact same as the command buttons on the side.  The main volume is back completely to the left (less a step).  I don't have any headphones with their own volume setting thus at the mercy of the BB controls (whether on the coast or on the screen).

    Y at - it any other ideas?

    tracee3 wrote:

    Yes, I have this option value.  Still not bring enough calm music as music makes earache when it is too strong, I quickly got it to FF :-/

    I tested mine with 3 different tips, one that came with the phone. Multimedia of BB (a separate volume controls) and a standard game without a microphone. All satisfactory work with music for relaxation (5 points) mid-term.

    If the next update to OS 10.3 does not fix the problem then send in repairs.

  • BlackBerry Smartphones Master Volume

    OK got my blackberry last night - love - the very easy.

    However, for some reason I can't find where to turn the main volume.  I actually want my key convenience to be able to switch between vibrate, silent and more.  Can someone please help?  Thank you very much.

    OK I didn't know that there was more than one curve.  I guess I need to move my phone is the 8330.

    I don't think you can set it that way. However, you can change your key con of "profiles". Menu, Options, screen/keyboard. Do con scroll keys, hit enter and select in this group.

  • My computer volume gets quiet, even at maximum volume, without apparent reason.

    Sometimes without reason tanks of volume on my computer and I cannot understand why. I'll change the main volume up, but nothing changes, and I will increase the volume of what I'm listening (it is more than a program, it does so it is not question of the program, but I mostly listen to Netflix or talking on Skype).

    Finally, it corrects itself, but it's very, very quiet to the point where I can't hear who I'm talking about and turn on the subtitles on Netflix.
    I don't know much about computers, this could be my sound card is going bad or something?

    Hello

    1. have you made changes on the computer before this problem?

    2. do you get any error code or error message?

    This problem usually causes due to driver problems. I would suggest trying the following methods and check if it helps.

    Method 1:

    Run the utility of game audio troubleshooting and check.

    Open the Audio playback troubleshooting utility:

    http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

    Method 2:

    Try the steps in the following Microsoft Help article and check if the problem persists.

    No sound in Windows:

    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

    Please respond with more information so that we could help you more.

  • Volume controls Windows 8.1 does not

    I have known problems with control of volume with Windows 8.1. I have noticed, regardless of which player media I use, that the volume in the drive control does not affect the output up to what he gets 10 or less (out of 100). When you do that, it falls drastically to where I imagine the volume level of 10 would be properly. This happens even when my main laptop volume is defined.

    I do not use any kind of volume normalizer limiter/compressor in one of these programs, nor I use all Windows Communications volume reduction options (mine is set to "Do nothing"). I also use not all enrichment equalization loudness on this sound card, since she is not even in development options. It is native to the Windows OS.

    I use the programs include: Windows Media Player, GOM Player, and VLC Media Player.

    The main volume of the laptop still work correctly, but I would like to have control of the audio volume and individual programs. It is of course apart from the fact that it should operate correctly regardless of how I want to use them.

    Has anyone else noticed and lived this glitch? Can anyone offer any advice that might explain or correct this problem?

    Thanks in advance.

    1, windows has never been set to use several media players, he told

    problems with the operating system... In addition, chk this link microsoft on volume control.

    https://TechNet.Microsoft.com/en-us/magazine/2009.05.wincon.aspx

    Also, try to run or cmd, type: DXDIAG run Direct X audio tests

  • Writing has occurred in the primary and replica Volumes in VSA

    In VSA that either wrote occurred in one of the VSA database those are written simultaneously in the main Volume and the replica of this primary Volume or not?

    Yes, from http://www.yellow-bricks.com/2011/09/19/vsphere-storage-appliance-why-i-think-it-is-cool/

    Note that this is a synchronous, so you have an acknowledgment of the active replica of the data store and.

    André

  • Export to PNG sequence exports only main timeline? I can understand everything?

    Hello world

    I have a Flash (CS6) animation animation is mostly in video Clips, although there are a few on the main timeline (which is of 500 images of length).

    When I export to PNG sequence, all that appears in the png's animation in the main scenario - video clips are not read.

    Is it possible to export the entire animation made to PNGs in Flash or should I get some 3rd party use?

    Thank you

    Richard

    Ok thank you. I found a great free Adobe AIR app that does exactly that, in the case where all other readers need to do too: http://swfrenderer.kurst.co.uk/

  • Missing the clip markers (not really, but they might as well be...) solutions? thoughts?

    What a pleasure! Adobe has a new neat way to put the clip markers where I need! (NOT!!!)

    The old clip markers are a thing of the past... SO, how can I work with this client? I made videos of his show at the NY Fringe Festival. Five shows, two casts. Instead of an orchestra or piano, he used an electronic track very carefully designed and registered. OPPORTUNITY! I can take the videos I did with my camera AVCHD (high-end consumers Sony model), slightly change my priority of video for a second (and third) performance with a cast (getting more close-ups of principles in a shootout, for example, and in one case I had a third to shoot what I missed or could add) , and if I have the line to the top of the electronc track I have a fake near-perfect «two cameras shoot» Singers sing in real time, but lip sync problems are surprisingly minimal, especially when you use the audio of the video of closing-priority.

    The problem: how to get the titles lined up on a specific image? The old method of the application of clip to the timeline markers is GONE. Working with Adobe technical support that I find the NEW way to add them by double-clicking the element that makes them appear in the Source monitor Panel. Here, by pressing "M" will add new markers throughout the day. In fact, the markers are added to the element level so that anywhere in the project, this clip is present the marker appear mainly (rather useless or annoying or particularly debilitating). The old clip markers added to the level of the timeline would be present only (with a fixed number - is there some numbers more) in the scenario where the marker was added; the lining to the top of the clips being the main use of clip markers, which made a lot of sense...

    SOOO... What is the problem? I have my workaround, right? BAD! Try the synchronization does not occur the playheads between timeline and source... Use 'GANG source and program'... they move in tandem, but they do not synchronize, so no go. He must be a marker in the source monitor, notice where it landed on the timeline, and take it (in the source monitor, you can not move the markers on the timeline) and move it until it falls on the playhead on timeline. Does anyone have a better way to synchronize the clips? I do not have timecode (could be possible with the workflow Adobe-suggested... but I have SERIOUS problems with that...) so I need to score and synchronize clips. I feel that something good has been taken away. I don't know that the thief thinks that he has done you a favor and give me a great new way to make... it is what, say pray?

    Try the playheads between the timeline and the source of synchronization.

    In the case of the sequence, target the track clip is on, so instead of double-click to open it in the Source monitor, press the F key.

    I feel that something good has been taken away.

    It has been.  Please let them know.

    https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

    Finally, there is a keyboard shortcut to add element marks while in the order, it is not defined by default.  But you can go in the keyboard shortcuts and the search for orders of the element brand and create one yourself.

Maybe you are looking for

  • Can this company unlock iPhone locked?

    OK, so my iPhone 6 was stolen a few days ago As soon as I was aware I have connected on iCloud and then find my iPhone and lost in the mode. I also confirmed that he has been locked through https://www.icloud.com/activationlock/ I'm worried sick that

  • HP Pavilion - 15-p264na: audio beats does not open after a clean install of windows 8.1

    Hello After a clean install of windows 8.1 the audio beats does not open. It appears in the control, but when I click on it nothing happens. I have sound, and everything seems to work ok, but I'm curious to know what happened. When I go to Device Man

  • TD Ameritrade Streamer does NOT WORK with version 4.0

    After you install version 4.0 of the Ameritrade Streamer Firefox did not work. The Streamer was going at the time of the 4.0 download

  • Shortcut keys for bold, underline, italic - how it works?

    Simple question: when I type the command-B the answer is a paragraph symbol that is highlighted. Is this normal? Instead of being able to immediately type in "BOLD", I have to hit once left cursor button so that the paragraph symbol is disabled. If I

  • G62 bios recovery failed

    I have a big problem with my laptop: HP g62-b04SL Series {removed privacy} I deleted all partitions and I installed ubuntu. Due to a problem with the brightness keys, I read on the web that someone tried to upgrade the bios. But without windows (not)