Maintenance of printhead HP Photosmart 6510/replacement?

Similar Questions

• Photosmart 6510 fine print until the replacement of the black print cartridge

  Same problem frustrating as others have reported. 6510 worked very well. Replacement ink cartridge black (HP 564) how low ink level (did not wait until the ink was out) and now black doesn't print do not. New registered as full of ink cartridge. Seen in the previous post a solution that worked for someone involving a reset that included a secret which has not have been posted by HP employee. Please... can I get these steps to try or suggestions in addition to clean the print head, etc. ? (Crossed all recommended steps HP.)

  Warranty expired about 6 months there (in the United States). Bought the second new cartridge in the cartridge case was bad... nothing has worked and am at my wit's end. Thanks in advance for any help that will make this printer usable again!

  Hi mak-86.

  Welcome to the Forums of HP Support! I see that you are facing some print quality problems on your HP Photosmart 6510, you cannot print black ink after changing the cartridge.

  I would like to continue you here: printer does not print black ink or color of ink or prints blank Pages, I understand, you may have made some of these steps already but I need you to complete all the steps in order to solve the problem of the missing black, you encounter.

  If you are unable to print in black ink, I think that the issue may be the printer and not the cartridge. I sent a private message on the Forums, go to your userpage to the right of your username.

  I hope hear from you soon.

  Thank you

• Photosmart 6510 does not print in black

  My photosmart 6510 does not print in black. I presume that it was the cartridge but I replaced the cartridge and it still does not print. I cleaned the print heads and the cartridge ink levels are full.

  The printhead, cleaning of the screen failed touchscreen printer running.  But when I sat down at my computer and used the program utility printing, he did.  I ran an initial print head cleaning my computer and then clicking the button indicating that the print heads were NOT clean.  He then ran a deep cleansing process.  Then I lined up the printheads of the same print utility program.  Now it works!

• Photosmart 6510: photosmart 6510 prints blank pages

  Printer was working fine.  Had to change the cartridge. First of all, I didn't have black and now I don't have much color either.  The printer says I had no real HP though now it shows that I do. I never bought my cartridges anywhere but the staples.  Printing October 2012 have changed many cartridges before you buy.  Followed everything I could find.  Still not printing.

  Hi @mjohns390,

  I read your post and see that you can not print in black or color now. I would like to help you today. If this helps you to find a solution, please click on the button "" accept as Solution"" down below this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Please, try the following steps to see if it will help solve the problem.

  Printer cannot print black ink or color ink or prints blank Pages.

  This document is for the cleaning of the cartridge and the contacts, check the tab on the cartridge and the printer reset. "Incompatible cartridge" or "indicated ink cartridge needs to be replaced" message on the c...

  If the problem persists, perform a power reset. A alphanumeric Code (example: ' 0 x 'r' C2...) ") displays on the front panel when printing. Do not take into account the title.

  This model has a permanent print head, this video shows you how to access the print head, so you can manually clean the printer and soak the printhead, it's my own personal recommendation, not one of HPs, is to use the solution proposed in the following videos.  I suggest only doing this if the printer is out of warranty.

  Once you get to the clock at 3:20 minutes, you can stop this video.

  Разборка HP Photosmart 6510 (disassembly Photosmart HP 6510)...

  This video is for a different model but it will provide the steps to move the print head and cleaning, also if you continue the video it will provide measures to remove the print head and soaking. Play video 01:24 minutes. HP 5510 will not print black and color - print head removed and cleaned.

  If you have completed all the above steps and your product still has a problem, service the product.

  I hope this helps. Let me know how make you out. Thank you.

• Photosmart 6510: lines horizontal and top and bottom of page when scanning

  Hello

  Scans of the bucket of my Photosmart HP 6510 leave a horizontal line at the top and bottom of the page.

  I tried to adjust every page that I scan to align as straight as possible on the glass and this sometimes helps a bit.

  I am able to bypass the lines in culture to, but would prefer to find a real solution.

  Any help would be appreciated because I don't know a lot about the scanners, thanks!

  I've included a sample page below (the mark on the right side is not dirty glass, it has been a staple in the page):

  

  Welcome to the HP community @lgilb01,

  I wanted to tender hand to respond to your message on the lines that you notice when you scan to scan in your Photosmart 6510 bed. It seems to me that there could be some light enter when performing the analysis, causing lines. If you are only scanning one page at a time, the lines should not appear as they are now.

  Here is a troubleshooting guide for you to try. If the lines do not fade, contact HP directly to see about a replacement printer.

  HP Photosmart 5510, 6510 and 7510 e - all-in - One Printer Series - vertical stripes, lines or scratches in Copies or scans

  Tip: Make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on.

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

  I hope I helped!

  Contact HP:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number are displayed.

• Photosmart 6510 print with only black print cartridge?

  Hi, can printing Photosmart 6510 in black & white (not gray, but b & w only) when the black ink cartridge is not empty, but all the other cartridges are? If the color cartridges are not already installed, it will always show b & w?

  Hello

  The 6510 PS will not work if the color cartridges are empty but the black ink.

  However, I think that it would be possible to print using only black ink but to do ink in the cartridges of colour as well because in case of maintenance color cartridges to do little ink in the print head maintenance routines.  When the head is friendly if there was no colour ink this part of the print head could heat upward too or overheat.

  Anyway, back to print in black only.  You mention that you do not want t p rint in black and white so you know where to look in the driver to get to this option. Then in Word, Excel or any program, go to the print function.  Click on properties. Click Advanced. You should see where you have levels of gray.  If you clock in the option box should reveal the other options will be "Black Only". Select this option.

  As I said you should be able to print using only black, but you will need the color cartridges ink.

  Hope this helps.

• PHOTOSMART 6510: Photosmart 6510 e all in one series, how can I get the driver?

  Hello. Can anyone help please.

  We had to replace the hard drive in our Dell laptop. The technician said that we would lose programnes. We are unable to connect to our printer via our connection wireless home.

  We need to install a driver?  Where can I get it?  The HP site says that the driver is not put at my disposal?

  any help appreciated

  Welcome to the community of HP @NICKM10,

  I hope that you do well

  I saw your post about how you cannot connect your Photosmart 6510 to your home network wirelessly, with your Windows 7 system, and I hope I can help you.

  To reinstall the drivers and software for printers, you can run the HP printer install wizard for Windows, that will find and install the appropriate drivers for you.

  Let me know what's happening and if you encounter any problems please let me know! Also I would like to know how you decide to connect the printer to your computer (WiFi, Ethernet, USB).

  If you want to say 'Thank you' to my answer to help today, click on the thumbnails below, and if one of my suggestions helped to bring about a solution, click on the button "Accept as Solution" please and thank you!

  

• Photosmart 6510 prints graphics but no text

  Photosmart 6510, SN [edited by Moderator], Firmware Version ESP1CN1244AR, 22093 ID Service, IK number 964, Version of the 028.000.1315 software. 000, Printer Driver Version 09.84.00.1173, Windows 7 X 64 operating system on 2 computers, Windows 8 X 64 on the third computer.

  OK, now for the problem. I tried to print a PDF doc. The graph at the top of the doc printed on the light side, but the text does not print at all. I noticed that the ink levels were low, then bought new carts. Installed the carts, run printhead cleaner, good result mine. tried to print same doc, with the same results. A run the print head alignment. Alone cyan print and error appeared on the printer "failure of the alignment, you can continue, but cartridges are not calibrated for optimal print quality. Press OK to continue', then I tried scanning and printing a photo. the reproduction was excellent, crisp with no descernible color change.

  tried to print a couple of JPEGs from each computer, all good. Now it gets more strange. A ran the doctor Scan and printing of difficulty.

  print the page, the colors are good, anignment box looks good, but missing text at the top of the page. I tried printing doc, txt, pdf files of all 3 computers with no difference. If the pdf file has graphics, print, but not the text. But xls docs will be printed. I tried to print the reports ststus fom and the quality of the front panel of the printer, I me am colored boxes described and filled with color boxes, no text. Reinstalled the software on all computers, no luck.

  Hi Allandane,

  From what you described, it seems to me that the black ink is not working. All black, you can see on pages that are feeling is probably a composite black made up of 3 colors. I can help you with this.

  Please use the solutions proposed in the following document; Printer cannot print black ink or color ink, or prints blank Pages.

  I hope this helps.

• Photosmart 6510 - not applications registered

  I just bought a Photosmart 6510 & web services installed, but when I select from the page ePrintCenter Apps none are listed? I tried this on my Macbook (Safari) so much & my wife Windows 7 laptop (IE) with the same result. I also tried to delete & reactivation of services web, but this did not work, either? Everything else seems fine so don't think that there is a problem with the network connection. I know that this printer has simply been replaced by the 6520 but probably I should still be able to install apps?

  Tpyical - as soon as I posted the message that I found the solution. For anyone else having the same problem, I had put the region of Europe rather than the UK. Once changed, I re-activated the web services & apps appeared!

• HP Photosmart 6510 e - all-in on: print a picture

  I want to print on paper photo of android (Samsung Galaxy S6 edge).

  The printer is set to ask what tray. Nevertheless, it prints only on plain A4 of android.

  I used the build-in print function the and place paper 4 x 6 inches, the papertray photo value and finally used the application e-print and paper Photo Paper Type value!

  Any help would be appreciated!

  As I mentioned in the op, I tried the HP e-print application.

  But I found a solution, instead of choosing the Photosmart HP 6510 directly (with ip address), I chose Photosmart 6510 with l'[email protected].

  Apparently printing via hp service it does not accept the chosen paper size (4 x 6).

  It works:

  

  But it does not work:

  

  Any other suggestions?

• How can I create custom with the Photosmart 6510 printers paper sizes

  I want to use paper sizes personalized with Word or Photoshop.

  I have a Photosmart 6510 printer all-in-one.

  While I can find the custom size tab layout in Word and can set this size, I don't seem to be able give the new size a name or save it.

  Is it possible with this printer, or is there a workaround to avoid the message 'paper mismatch '.

  Thanks for the ay help I can get.

  I'm sorry not to come back earlier.  I stumbled across a work around for this problem.  Use a different print driver for the printer.  I'll link the instructions below.  Again, sorry I don't come back with the workaround as soon as possible.

  How to assign other drivers to print in different Versions of Windows

• Cannot scan to the computer. Photosmart 6510

  I have just purchase a photosmart 6510 and I cannot scan to the computer.  The printer tells me that I need to activate this via the printer software.  I know that I have installed all the software from the disc supplied.

  I can't find where I have activate the scan of the computer on my laptop.  Support information tells me to click the icon for the printer to my desktop, I do not have!  I tried going through the control panel and impossible to find something there.

  I go in the HP folder in my Start menu and click on scan HP that I get the following message "the machine HP photosmart 6510 series is not found".  I don't have a problem with printing at all.

  Tried to start printing and scanning of doctor and who did not make a difference. (In fact, the scan option came not on it).

  How can I fix this please?  I'm running Windows Vista Home premium.

  Hello.  Thanks for your reply.

  I've sorted really the problem now.  But let me explain what it was.

  I tried tool doctor who recommended you after browsing these forums, without success.  In fact, when I ran the scanner, he told me that he had no problem with printing, but there was no mention of the scanning anywhere.

  In fact, I uninstalled all HP software, removed the printer from my control panel.  Then reinstalled the software from the disc and then installed the printer again (I did things the opposite of the front walkway).  And the scanner function now works.

• Photosmart 6510 - no computer"found" - "Scan to computer" not activated

  Hello

  With the help of HP Probook, with Windows 7 Professional.  64 bit.

  My Photosmart 6510, I cannot scan documents on my laptop. I think that this only started happening recently when I started to use AVG PC Tuneup software, but I have district check if this may be the cause that the scanner is aunable to detect the computer.  I get the following message:

  "No computer was found - make sure that the printer software is installed on your computer and that the 'Scan to Computetr' is enabled via the printer software.

  I uninstalled the software and reinstalled again.  When reinstall it wonder "Enable scan" I agree.

  Previously, the "Enable scan" message popped up whenever I have rebooted, but that has stopped so I think something may have changed.

  Any suggetsions would be welcome.

  TX, Kurt297

  Hello

  Please, download the following tool and run it on your computer:

  http://ftp.HP.com/pub/softlib/software12/COL50849/MP-135113-1/HPPSdr.exe

  Hope he will give some answers if not reinstall full feature software and drivers from following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&product=5058336

  Kind regards.

• Photosmart HP 6510: Personalized printing HP Photosmart 6510 problem

  I have read through a couple of threads and followed the instructions to turn on 'custom' on my HP Photosmart 6510 all-in-one printing. I loaded the driver of HP Deskjet 450, which finally allows me to select a custom size of 5.5 "x 8.25". I'm trying to print on wedding invitations response cards. Wedding invitations made the same paper 5 X and can be printed without adding a new printer driver for the 6510.

  Now that I can get the printer driver (deskjet 450) to recognize the custom format 5.5 "x 8.25" but I can't print. I use a model of design by Staples and get the following errors.

  Errors - the margins of Section 1 are set beyond the printable area of the page. Do you want to continue? I pushed Yes and the printer tries to print the job abd I get the error "paper mismatch". The printer actually determined the size of the paper when I adjusted the paper tray to accommodate custom size paper.

  Troubleshooting - I tried to adjust the margins, but I have little ability to adjust in the template provided. When I adjusted the margins, I always get the error "paper mismatch".

  Any ideas on how to do more troubleshooting?

  Hello

  Please retry the procedure which should solve the problem below.

  (if the printer is connected with USB)

  Click START > device and printer > add a printer > add a local printer >

  Select "Use existing Port" then Virtual USB from the drop-down menu, click on NEXT, in the production list, select HP / Hewlett-packard and in the right pane, select Deskjet 6980 and finish the wizard

  OR

  (if the printer is networked)

  Click START > device and printer > add a printer > add a local printer > choose "Create a new Port" > type in the printer IP address click NEXT, in the manufacture of the list, select HP / Hewlett-packard and in the right pane, select Deskjet 6980 and finish the wizard

• How can I scan with OCR with my hp Photosmart 6510? I want to scan to a text of the parameter file.

  I got a new Photosmart 6510 all-in-one printer. I have the ability to scan to a .jpg file ot a .tiff or a .pdf file - just like the pictures, no form of text that can be edited. On my old photosmart printer (a 2572) I was able to analyze OCR allows you to place the scanned document in a file with the Edition of the text, how can I do that with this new printer? I thought I was adding features, do not remove them. I use the 6510 wireless on a home network. I am also on the Windows Vista system.

  Thank you

  Hi nawa4,

  Software OCR Iris didn't come included with this printer. If you have OCR software installed on your computer, you should be able to scan using this program. If you do not have an OCR program installed you can check the link below.

  http://www.IRISLink.com/C2-2093-189/IRISCompressor---create-and-compress-PDF-files-in-a-click-.aspx?adwp=SAS-IComp-us