Make new partitions

Similar Questions

• HP envy m6 w103dx: how to make new partitions?

  The thing is that if I use the disk management software, it does allow me to have my desired partition size, if I do the partition during the installation of Windows and then I have to lose my OS and I read on the so pure support forum, I installed OS, I'd lose software recovery and content of the recovery partition is visible and they cannot be reinstalled.
  
  So I'm always reluctant to do a clean install, because I don't really want to lose the recovery options, but don't really care about OS.

  @Tayyab1

  If you try to reduce the C partition and are not able to reduce beyond a certain point, this is often due to locked file - try turn off windows system restore to the C partition, reboot and then temporarily disable the pagefile.

  I hope that you will now be able to reduce the partition to the size you require - once this done, re-enable the system restore and page file.

  Kind regards

  DP - K

• Creation of new partitions - problem

  Hello

  Two days I bought the HP Pavilion dv7-6b40ew now I want to do a few new partitions on my HDD 640 GB, because it's not safe to have only the C partition

  I downloaded EASEUS Partition Master Home Edition and there is list of partitions:

  

  I can resize the C: partition to size I want:

  

  but when I try to make new partitions in unallocated space, I have error:

  

  I don't know what to do.

  (1) I read somewhere I need to burn DVD Recovery and delete recovery partition and everything will be fine, is it true?

  (2) is there a method to make new partitions without deleting the recovery partition? It is not nice when I need DVD with me when I go to a place.

  Please help how to make new partitions.

  Greetings, Thomas

  Hello

  There is an excellent guide to Daniel_Potyrala to this topic on the link below.

  http://h30434.www3.HP.com/T5/other-notebook-PC-questions/how-to-REPARTITION-HDD-of-HP-notebook-with-pre-loaded-Windows-7/TD-p/742019

  Kind regards

  DP - K

• How to make a new partition on the HARD drive?

  I have 500 GB of HARD drive (internal) in my Notebook.It has only 3 still drives. Among them, drive C = F - 107 .through 226 GB, E - 118 gb disk management, I've seen 2 discs unaccessable, is to saythe recovery-13, & system-approximately 1 GB.
  However there is a recovery partition, I stand by that,that I did earlier recovery disks, unpartition & free space & create a new partition with my senses affected discs.
  How can I do this? Anyone... plzzzzzzzz...

  Another question... Can I make bootable USB drive on this recovery drive? If Yes... How?

  It is a soft, easy to use, tool

  http://www.partition-tool.com/personal.htm

  No need Calculator :)

  Recovery partitions are usually in front of the C drive and should not be tempered with / recovery disk or not.

  http://bitsquad.co.in/2011/05/Windows-7-bootable-USB/

  http://www.SevenForums.com/installation-setup/145498-create-bootable-USB-drive-Windows-7-x64-x86-machine.html

• Problem to make a new partition

  I have a problem when creating a new partition: at the end of the process in the disk utility, may not achieve the partition, error on file system. Can you help me?

  OSX El captain

  First aid can repair the disk, and then try again.

• How to make a new partition on Satellite P850?

  Hello guys

  What program is best to do a new partition without lost my existing?

  And if I do this new partition after recovery, he will be existing or not, and I mean my files on this partition

  THX

  When you buy new laptop it comes preinstalled with recovery image and has factory settings. If long you have factory settings you will be able to install the OS with the help of HARD drive recovery facility.

  If please before do you and change anything create recovery (recovery discs) DVD using preinstalled Toshiba Recovery disk creator tool. It may happen that after that change installation drive recovery HARD structure partitions will not be more.
  > And if I do this new partition after recovery, he will be existing or not and I mean my files on this partition
  After recovery you will absolutely the same structure of partitions as you have now. So be careful with that, and before installing recovery image al backs up your data to an external device.

  Best program? Best program for me has been to Partition Magic.

• recovery system after creating a new partition

  Product number: A6Y43UAR #ABA

  Name: HP Pavilion g6-1d38dx Notebook PC

  OS: Windows 7 64-bit

  My hard drive is shipped with a factory setting of 4 primary partitions. I would like to remove one of the partitions in order to create a new primary partition using this guide (jump to option I content):

  http://h30434.www3.HP.com/T5/other-notebook-PC-questions/how-to-REPARTITION-HDD-of-HP-notebook-with-...

  My goal is to create a new partition D where I store all my data so that something happened to my operating system that is on the C drive (viruses, etc.), all my data will be safe in the drive D. I hope that running the system recovery HP (using the f11 key) will not remove the user created the D partition and the data in it , but that's where my confusion. The guide above says the following on this subject:

  "Remember that if you decide to use the recovery discs or the F11 option to restore the PC to its original state, all partitions that have been created by you will be lost and will also lose all data that was stored on them."

  
  However, another document which is the HP system recovery guide, says the following

  Your computer can have three types of available system recovery, or he might have only two. Use the type of recovery in order to solve your problem without making further changes as necessary.

  If you don't have 3 options in the recovery then Yes, System Recovery Manager will delete all partitions and restore the original configuration.

  To better protect your files an external USB hdd is a good investment of backup. You can also use it to make a System Image of your hard drive that can be used to restore windows and all software/drivers if you need to reinstall. 1 > guide 2 > guide

• How to make Vista partition on the HARD drive as first with recovery CD

  Hello

  I want to format and retrieve information from my 'Vista' (C: / /) partition, which is the first. But when I choose the option "Format and recover to a first partition on your hard disk (without RE) ' the computer began to recover in" Type of Partition: windows NT NTFS (ID: 07) "whose size is only 1.50 GB.

  In the middle of the process, it shows not 'enough space on a disk.

  Question: How to make a 'vista' first partition? What is 'the first partition' in the second formatting option and recover the system?
  Thank you for your answers

  Hello

  Sorry, but you will not be able to do. I know it's a bad situation but if you use the first option that the whole HARD disk will be formatted and C new partition created. Second option, that you can not use at all. I tested it with my Satellite A100.

  I called Toshiba and they said that Toshiba work on new recovery options and new notebooks will have the best recovery option. Something like old installation expert ghost mode.

  I know it's wrong, but unfortunately there is nothing to do.

• New partition formatting is not possible!

  I use Win7 Pro and that you have a standard installation of toshiba plant. I have reduced the size of my Partition C and you want to create a new 60 GB for my data partition. The free space is 65,43 GB unallocated space directly after the main C (152,38 GB) partition.

  I'm using the standard tool for the management of partitions in Windows Control Panel.

  Every step is behaving normal Nigerian I am trying to format the new partition. The message error is "there is not enough free space on the disk/disks. I tried to format a smaller portion of the free space, IE 1, 5 or 10 GB, but still the same result.

  Anyone with a good idea?

  concerning
  Carpet

  Prior to do any create a recovery media and make backup recovery image. How to do this you can read in the document of the user manuals. It is very important. After having changed the structure of partitions, you can have problems with HARD drive recovery facility, especially if you are trying to format this partition of 10 GB recovery.

  As far as I know, you can reduce the C partition and create the new partition. I tested it today on my machine and everything works fine.

• How to make the partitions using the toshiba restore CD

  Hi forum users. I just want to explain more on creating partitions using our Toshiba Recovery CD. I have a portable satellite A50-101.

  I searched some topics on this forum and found this post from Quad. Just follow these steps carefully and you'll be successful to make the partitions on your hard drive.

  Here is the message by Quad.
  ######################
  Hi forum users

  If anyone of you needs an accurate description of installation of operating system using Expert mode, maybe this can help you.

  When the recovery process has begun there are menu where you can choose between two modes of installation.
  1 standard mode
  2. expert mode

  At first he put there important warning: all data stored on your computer will be lost. It is also important that hollow a Standard installation partition will be created and all data on the hard drive will be lost.

  If you want to install the operating system on a partition, please use Expert mode. In this case, the software can be installed on an existing partition. Alternatively, you can make one by yourself.

  If you want to make a partition with a set capacity, please do it on this path:

  1. choose number 2 Expert mode pressing
  2 approve OK key ENTER
  3. choose LOCAL > DISK > image
  4. look in: must be selected for the CD-ROM drive
  In the Middle window choose GHO file and press ENTER
  5. using the TAB key you must mark the player information and so on and press ENTER
  6. using TAB button again part brand of window average (blue line) and with SPACE activate new dimension box
  7. place inside the new size of the partition and press ENTER again
  8. the question to continue with load disc? confirm with OK

  I hope this can help you to make the desired partition size.

  Good bye
  ######################

  At step 6 above, enter the size of the partition you want. Size must be entered in megabytes (MB), gigabytes (GB). (mine is 40 GB HDD, i.e. 38146. I go to half, 19073)
  Proceed with the disk load? Click OK.

  It will now recover your machine to its factory setting. 2 partitions will be made.

  Once the restore is complete, open my computer. You'll see only drive Local (c) on hard drives. Click on properties and you will see that the size that you specified in step 6 above (20 GB). So, where's my other 20 GB? It is a way to treat 2 to make a new logical drive.

  Follow this link: (these links has screenshots for easier understanding)

  http://www.theeldergeek.com/hard_drives_07.htm - create an extended Partition (step 1)
  http://www.theeldergeek.com/hard_drives_08.htm - create logical drives in an extended Partition. (Step 2)

  I hope this can help you make a new logical drive in an extended partition. :)

  Hi 012

  Thank you very much for your posting. I forgot to mention that the logical drive must be created because the unusable space do not appear by Windows.

  But there are users like you to help. Respect!
  Fashion Expert recovery procedure section is now perfect.

  Good bye

• Satellite A50-104, make 2 partitions

  Try to make the 40G hard drive into 2 partitions with ACRONIS. but can not run ACRONIS as usal.
  I want to intall windows 2003 on the system partition(20G) and I rest 20 GB of data storage.

  Hello

  Try again with Partition magic. It is very powerful and you can create new partitions or even change the ability of a persistent.

• Do not create a new partition

  I installed window 7 HP on my lenovo g580 but I encountered some problems at the stage of creation of partition ~ I had 2 unassigned partition and at the same time to create the 'NEW' partition ~ but I got the message saying that "the window cannot be installed in this hard disk space. the selected disk is the maximum number of partition of this type"after I created a new partition which means I got this message when I tried to create another partition ~ what is this average n how to solve this problem?

  Just see it. Also, now make factory backup without bloatware.
  http://forums.Lenovo.com/T5/IdeaPad-Y-U-V-and-Z-series/creating-recovery-disks-manually-through-RT-S...

• HP Pavilion 15-ab231na: how to make a Partition in windows 10

  How do I partition my hard drive, I need 2 separate Partitions

  How can I do it by myself

  Follow this procedure:

  1. search computer management in the search box on the taskbar.

  2 - now, look in the menu on the left and deposited, there is disk management. Just click on disk management. Wait a few seconds for loading the disc information.

  Now, right-click on the required disk you want to partition. For example, if you want to make a partition on the Local C drive, then right-click on it. Now click on Decrease of Volume.

  3 - now, a message will be displayed are saying mark space. After that, in the next screen, you will get 3 Details.

  In the first field, total size before shrink is written. (This is the current size of the Local disk)

  In the 2nd field, the size of reduction in MB available space is written. It is the maximum size of the hard disk, you can create hard disk.

  Now, the 3rd and the most important area is your field of decision, to put the size of the desired disc, in fact, given the maximum limit in the second field.

  Note: These details are in MB. To get an idea in the UK, just divide it by 1000.

  4 - now, when you have an idea about the size of the hard disk that you want to create, click button under film . Wait a few minutes. Please abstain you from any activity in the middle of this operation.

  5 - now, the size that you specified in step 4 just creates the space unallocated on your PC. You must create a hard drive out of it and name it also.
  Now, once the unallocated space appears as shown above, just make a right click on it and click on new simple volume. And will open a new Wizard of sample Volume.

  6 - now, in the next screen, simply specify the size of the hard drive. Click Next.

  7 - on the next screen, choose the drive letter you want to name. You can choose any letter.

  8 - file system choose from the next screen. NTFS is recommended, but you can also select FAT32 if you wish. In addition, change the new Volume and name it as you wish.

  9 - on the next screen click on Finally, the finish for the finishing process.

  Once you click on finish, it will take a few minutes to complete the process.

  It is the best way to perform a Windows10Partition.

  I hope that it helps.

  Source: https://techyuga.com/easiest-way-to-perform-a-windows-10-partition/

• Not able to create the new partition in disk management.

  Original title: Windows XP Home Edition Partition Question

  I tried to create another partition on my computer running Windows XP, but when I go to disk management, it doesn't let me do anything when I right click on a partition. I can't make a new (tried with cmd and disk management) and I can't change the current criteria. Is there an option somewhere that prevents you from changing or something? Almost many of the options are grayed out and I can't make a new partition. How can I fix? I want to make another partition.

  Hi JwadAziz,

  Windows XP doesn't support narrowing of the reader.

  You can use your favorite search engine & download any third-party software that might be used to.

  
  Note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there.

  Hope the helps of information.
  Please post back and we do know.

• Create the New Partition of the former created Partition

  Mr President.

  I use Windows XP SP3 OS with 4 Drives (C, D, E, F) hard partitioned. The size of my hard disk is 250 GB. I create forgettably drive E: Partition of greater capacity (Say 85 GB) memory space. The E: Partition holds about 35 GB of space free and remaining serve the space. I need to create the New Partition (G :) free space in the E: 35 GB Partition saying. ) The reason to ask for the help of the u. Please answer me as soon as possible.

  Hello

  Make sure that you have free space in each drive for better performance. When free disk space reaches 200 megabytes (MB) or less in a car, you will be prompted to free space in the disk.

  See the below items to create a new partition.

  How to use disk management to configure basic disks in Windows XP
  http://support.Microsoft.com/kb/309000

  How to partition and format a drive hard using the Windows XP Setup program
  http://support.Microsoft.com/kb/313348