Manage columns in the calculation Manager

Similar Questions

• The value of path as unit target in the calculation Manager

  Hello

  is there a way to define a course of treatment as unit target in the calculation Manager? I have data with unspecified units (for example, deg_Cel ° C) then I disabled the calculation of the amount in function. Now I want the result channel have the same unit as the first input channel (something like @@ChnUnit (N) @).

  Best regards

  Martin

  Hi Martin,

  You can launch the Manager of calculation without management unit (turn based on the amount off the coast).  You can set the property unit of the resulting string with ChnDim() to be of the same unit as the starting channel.  I guess you do all that with a VBScript.  You actually run the Manager calculation by hand with the mouse?

  You can add as many lines of VBScript code that you want at the end of the normal equation.  Here is an example of calculation which comes with tiara:

  P = n * (2 * Pi / 60) * M * (1 / 1000)

  If you click the button, you can add the following line of VBScript call second to run the equation:

  Calculate the call ("P = n * (2 * Pi/60) * M * (1 / 1000)", CurrSymbols, CurrValues, "kW")
  
  ChnDim (P) = ChnDim (n)

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• The calculation Manager GUI

  Hello

  In the calculation Manager GUI does not appear in FireFox (I have remote XUL addon installed and activated) and wrote a plugin is required to view this content. This plugin should be?

  Thank you

  It requires adobe flash player 10 +.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Automate the calculation against Essbase ASO through the calculation Manager

  Hi all

  Anyone know if I can automate the calculation stored in calculation on a cube Essbase ASO Manager?

  I need calculation automated directly against an Essbase cube as it is not a planning application.

  I tried to use CalcMgrCmdLineLauncher.cmd , but it seems not to be able to find the application. I'm assuming that she tries to locate a planning instead of an application of Essbase application.

  Currently I have a number of calculation parameters in the calculation Manager but I would like to automate the process, as well as on a daily basis, the cube is rebuild and recalculated.

  Any ideas if CalcMgrCmdLineLauncher.cmd should work or if there is another method, in addition to my calculations in MaxL.

  Thank you

  Jimmy

  What version? If it's so 11.1.2.3 for Essbase you use a launcher separated in % EPM_ORACLE_HOME%\common\calcmgr\11.1.2.0\lib, calcmgrCmdLine.jar file if it is an earlier version and then probably will need to use MaxL

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Cannot use Smart list postings in the calculation Manager

  Hi all
  
  I wrote the script with condition for active listings in Cal Script
  
  If ("Eligible Grade" == 1)
  'Per Diem per capita' = 3500;
  "Travel fees per person ' =' Per Diem per capita' * 'Journey' + 'Avg ticket cost per head."
  "Per diem"="travel time" * 'Per Diem per capita' * 'no. People who travel. "
  "Ticket for depreciation" = 'Avg ticket cost per head' * 'no. People who travel. "
  'By Diem travel expenses allowance ' ="' + 'Ticket for depreciation;
  
  ELSE IF ("Eligible Grade" == 2)
  'Per Diem per capita' = 2200;
  "Travel fees per person ' =' Per Diem per capita' * 'Journey' + 'Avg ticket cost per head."
  "Per diem"="travel time" * 'Per Diem per capita' * 'no. People who travel. "
  "Ticket for depreciation" = 'Avg ticket cost per head' * 'no. People who travel. "
  'By Diem travel expenses allowance ' ="' + 'Ticket for depreciation;
  
  But same Script does not work in the calculation Manager... I know in the work of Manager Smart calculation list differently... can can pls let me know how we need to change to adapt to the calculation Manager

  Hello

  The person above didn't say that [[Smartlist.value]] returns a Boolean value, so you still have a Boolean value in your IF condition.

  Use

  IF ("Eligible Grade" == [[XXGradeEligibility._1_2]])

  instead.

  Thank you
  JM

• Could not find the calculation Manager option in the menu

  Hi all
  
  I have configured the calculation Manager in my machine [version: 11.1.2].] I can't find the calculation Manager option in the menu [Navigate-> administer-> calculation Manager].
  Calculation Manager is running. Kindly guide me to overcome.
  
  Thanks and greetings
  Alizée

  If calc manager has been installed after the configuration of the web, re-run the web comfiguration step. You may also cycle in the service of SST on the Foundation subsequently.

  Kind regards

  John A Booth

• Cannot access planning applications after you have added the calculation Manager

  Hi guys,.
  
  I have recently added/installed the Manager calculation on an environment running (EPMA, HPL, BSE) (11.1.2.1/win 2008r2 64 bit), which had prior to installation of the Calc Manager. EPMA and planning applications in classic and running.
  
  After that, I deployed the calc manager and configured the Web server on the server of the Foundation/epma only, I have 3 servers (Foundation, Manager of epma and calc), Essbase and planning.
  
  I have restrated the services and I can open the calculation Manager.
  
  When I try to open the existing applications of EPMA I get:
  
  [launch the journal]
  [< BEA-101020 > < [path of the module: HyperionPlanning ServletContext@6352948[app:PLANNING: / HyperionPlanning spec-version: 2.5 version: 11.1.2.0]] Servlet failed with Exception
  java.lang.ClassCastException: java.lang.NoClassDefFoundError
  at HspLogOn.Handle (unknown Source)
  at HspLogOn.doPost (unknown Source)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
  at HspValidationFilter.doFilter (unknown Source)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:111)
  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3715)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3681)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
  >
  [End log]
  
  I tried to transfer the applications of EPMA exisitng but it has been abandoned with (HTTP/1.1 500 Internal Server Error)
  
  I checked the ohs_component newspaper and saying some file is missing:
  
  [launch the journal]
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/bpmui/resources/bpm_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/wspace/resources/wksp_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/raframework/resources/cds_global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/raframework/resources/tools_global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/reporting_analysis/resources/fr/fr_web_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/planning/resources/hp_global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/awb/resources/awb/awb_global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/aif/resources/aif-global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/calcmgr/resources/calcmgr_global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/raframework/resources/changeManagement_global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/webanalysis/resources/resources_global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  Failure for the request: / HyperionPlanning/servlet/HspAppManagerServlet? action = validate_workforce_or_capex & license_type = all & lang_id = en, Resp Code: [500]
  Failure for the request: / HyperionPlanning/servlet/HspAppManagerServlet? action = validate_workforce_or_capex & license_type = all & lang_id = en, Resp Code: [500]
  ....
  File does not exist: D:/Oracle/Middleware/user_projects/epmsystem1/httpConfig/ohs/config/OHS/ohs_component/htdocs/favicon.ico
  Failure for the request: / HyperionPlanning/servlet/HspAppManagerServlet, Resp Code: [500]
  
  [End log]
  
  
  Appreciate any help! and thanks in advance,
  Omar
  
  EDIT:
  I found that all the. JS files that are missing are actually there only without "-U.S.»
  
  Published by: Omar on January 23, 2012 15:17

  Have you tried to redeploy planning again?

  In theory, you should be able to install/configure additional products at a later stage if because they are produced of foundation it may have caused problems.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• place a select query calculation in a different column in the same table

  How can I put my calculation result in a column named within the same table?

  I have a table called: dgpercentagedatachart

  I use the columns of this dgpercentagedatachart: totalcecrating divided by lowestfeederrating times 100 to get the percentage

  In the query, I gave the result the Alias of the cal

  What I want is to put this result in my application or my calculation (in percentage) in my column "percent" on my table of dgpercentagedatachart vacuum.

  How can I configure this syntax?

  This is the select query, I came with:

  Select dgpercentagedatachart.totalcecrating, dgpercentagedatachart.lowestfeederrating,.

  100.00*dgpercentagedatachart.totalcecrating/dgpercentagedatachart.lowestfeederrating as cal

  of dgpercentagedatachart;

  Here are the results:

  CAL lowestfeederrating Totalcecrating

  8,978 7.48166666666666666666666666666666666667 120

  30.951 25.7925 120

  5.04                         120                          4.2

  Hello

  2685870 wrote:

  How can I put my calculation result in a column named within the same table?

  I have a table called: dgpercentagedatachart

  I use the columns of this dgpercentagedatachart: totalcecrating divided by lowestfeederrating times 100 to get the percentage

  In the query, I gave the result the Alias of the cal

  What I want is to put this result in my application or my calculation (in percentage) in my empty column '%' on my table of dgpercentagedatachart .

  How can I configure this syntax?

  This is the select query, I came with:

  Select dgpercentagedatachart.totalcecrating, dgpercentagedatachart.lowestfeederrating,.

  100.00*dgpercentagedatachart.totalcecrating/dgpercentagedatachart.lowestfeederrating as cal

  of dgpercentagedatachart;

  Here are the results:

  CAL lowestfeederrating Totalcecrating

  8,978 7.48166666666666666666666666666666666667 120

  30.951 25.7925 120

  5.04                         120                          4.2

  To change an existing column in a table, you can use the UPDATE or MERGE, instructions like this:

  UPDATE dgpercentagedatachart

  Percentage of VALUE = 100,00 * totalcecrating

  / lowestfeederrating

  ;

  Noramlly, tables is not redundant columns like this.  If percent can always be calculated from other columns, then it is probably better to calculate at run time and store it in the database, where you will have to be updated each time the columns it depends on change.  You can use a view to avoid having to encode them the calculation.

  If you really don't want a column that can be calculated in the same lines other columns, then use a virtual column (if you use Oracle 11 or higher).

  I hope that answers your question.

  If this isn't the case, please post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and also publish outcomes from these data.

  If you ask on a DML statement, such as UPDATE, the sample data will be the content of the or the tables before the DML, and the results will be the State of the or the tables changed when it's all over.

  Explain, using specific examples, how you get these results from these data.

  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: Re: 2. How can I ask a question on the forums?

• I'm figuring (add) a column on a PDF form and on the calculation tab, it doesn't let me select (check) the fields I want to calucalate.  It won't let me type in the fields of the box either.

  I'm figuring the shape (add) a column (sum) on a pdf file and on the calculation tab, it won't let me select (check) the fields I want to use in the calculation.  It won't let me type fields in the box either.  I'm doing something wrong?

  the mouse click on the name of the field and press the space key

• Calculation on two columns in the pivot table

  Hi all
  
  I have a vision:
  Dept. year amount
  Accounting 500 $2010
  Accounting 700 $2011
  $100 engineering 2010
  $600 engineering 2011
  and etc.
  
  
  PivotTable: (data displayed side by side)
  
  Dept: 2010 2011
  Accounting 500 $700 $
  Engineering 100-$600
  
  Is there a way of PivotTable to create the additional column, and do the math on this column? New column called 'Change' (amount of real computation of 2010 less amount of 2011 by each Department). I see the function to duplicate columns in the PivotTable. But that's it... without additional calculations.
  
  Thank you in advance,
  
  Sonya

  Pretty easy simple n...

  Your year must be in the columns area... Simply create a new collar calculated say diff with function as formula and formula of the sale as a "2011" "- 2010". This will give you the sum of diff. You can do this more flexible by making use of $1 & $2 to reference...

• ADF 11g - adding serial No. sum of column/calculation of column in the table of the ADF.

  Hello
  
  -How can I add serial number of column in the table of the ADF.
  -What is the way to calculate the sum of a column at the end of the table. (Table of the ADF). That is to say.
  10
  20
  15
  ______
  45
  
  
  Niaz M

  Hello

  Here you have some links to blog posts how do the sum:
  http://apps.branislavnemec.com/blogs/faces/bjanko/blogs.jsp?blog=bjanko20070725180020
  http://Kuba.zilp.pl/?id=781

  Kind regards

  Branislav

  Published by: Branislav Nemec June 6, 2011 11:23

• Premium HP: HP Premium: PROGRAM FOR DOING MATRIX OF BATTERY of the CALCULATOR (don't DO NOT WORK!)

  Hello!

  I attend the University for electrical engineering, and so I plan to buy a good calculator for my needs:

  -programmable with enough memory

  -graphical representation

  -"Advanced" math

  I have not discovered only recently on the amazing HP calculators (e.g. HP 50 g), which are capable of the RPN notation and thus make the calculations very fast and effective. I really hate the new calculators that announce the entry "quick and easy" using graphic symbols and cursor to select the location of the entrance! It of a lot of your time and makes me crazy, especially when it comes to long and "complex" calculations

  As I am not able to get the new HP 50 g, I looked at his "successor": first HP. But unfortunately there many defects in the RPN notation and also in some functions. But I'm willing to compromise, especially if I can write programs to replace some missing critical functions of HP 50 G.

  BUT, when I started looking into writing my own duties I quickly discovered that the lack of management functions of the inputs/outputs and even some strange/inexplicable behaviors.

  I wrote a program:

  EXPORT array()
  
  BEGIN
  
  LOCAL a, b, i, j;
  
  a: = years (1);
  
  IF length (a) == 1
  
    THEN
  
  b: = MAKELIST (years (X), X, a + 1, 2,-1);
  
    ON THE OTHER
  
  i: = a (1);
  
  j: = a (2);
  
  b: = MAKEMAT (years (i + j + 2 - J-(I-1) * j), i, j);
  
  END;
  
  (b) return;

  This program takes the last argument ("a") of stack for the size of the list/matrix.

  If the argument 'a' is a number (list 1 item), it creates a list of the last 'a' arguments from the stack. -> WORK

  Otherwise, it creates a matrix with columns and the specified lines. -> DOES NOT

  Now when I tested the code without I or J arguments MAKEMAT service, she worked OK. He worked too, if I used a very simple expression: for example I have J-1 or i + j - J + 2 (column only scanning).

  (The upper part (1 expression in the stack is the return value after execution of Array ()))

  OK LIST:

  

  MATRIX not OK:

  

  MATRICES OK, so current of enforcement only of years (i + j - J + 2):

  

  MATRIX OK, so current execution really simple Ans(I+J-1) function:

  

  Why these anomalies! I was really looking forward to buy HP Prime, but after all these issues and no real control on the stack of the calculator for the impressive programs

  HP 50 g has built in functions for these conversions, but more recent first HP does not work.

  All the best,

  Ziga

  And summarize the features of the program:

  Make a list of last wrote the number (one being 1: command):

  

  Make a matrix using a schema = {i, j} (a being list in 1: command):

  

  The array() function:

  EXPORT array()
  
  BEGIN
  
  LOCAL a, b, i, j;
  
  a: = years (1);
  
  (A) IF size == 1
  
    THEN
  
      b: = MAKELIST (years (X), X, a + 1, 2,-1);
  
    ON THE OTHER
  
      i: = a (1);
  
      j: = a (2);
  
      b: = MAKEMAT (years (i * j - J + 2-(I-1) * j), i, j);
  
  END;
  
  (b) return;
  END;

• The Calculator display is glitching in Windows 7

  Hello

  I have a question where the bottom of the calculator of Windows 7 (behind the buttons) displays the image of the Office opening.  When I move the application to another area of the screen, it keeps the ghost image of the background where he opened its doors.  Also I try to use the calculator, the numbers of top of the other to create a jumble of numbers.
  It looks like this:
  http://PostImage.org/image/93numxfx3/
  -J' tried C: > SFC/scannow
  -J' tried logging into my account of comments to see if my account is corrupted and it has the same behavior.
  Is there anything else I can try to solve this problem?
  Thank you
  Dave.

  Oddly enough, I think I can find something related - I managed to solve my problem.  I had an older version of http://www.fastpictureviewer.com/forum/viewtopic.php?f=11&p=3806 that was interfering with Visual Studio 2012.  When I updated this Codec (that I use to view the RAW files from my camera) went off the issue of the calculator.  I had an older version of FastPictureViewer - 2.4 - ish.

• Hide the values of the columns in the tables of the af

  Hi all

  I have a page with a table created using a basic VO EO af.

  I have a requirement where I need to hide the values in a particular column (see the empty value) for the given line when the value is greater than 100

  I tried the two expressions following groovy with failures. Can anyone suggest the phrase please correct groovy to achieve this

  Groovy expression	Results
  #{row.bindings.JointAcNo.inputValue lt '100'}	This hides values such as 2,3 as well (similar to a chain Treaty)
  #{row.bindings.JointAcNo.inputValue lt 100}	crashes with the following error message Cannot convert the type oracle.jbo.domain.Number of class 0 class java.lang.Long ADF_FACES-60097: for more information, see the error log of the server for an entry beginning with: ADF_FACES - Exception during the PPR, #2 60096:Server

  
  

  
  

  JDev version - Studio Edition Version 11.1.2.0.0

  Hello

  The problem here is that the number 100 is java.lang.Long type and you compare it to #{row.bindings.JointAcNo.inputValue}, which returns the value of type oracle.jbo.number.

  To remedy this, you must convert 100 type oracle.jbo.Number. You can do this by writing a method in your bean managed as:

  oracle.jbo.domain.Number public getNumber() {}

  return new oracle.jbo.domain.Number (100);

  }

  Now, you can put your attribute visible/rendered as #{row.bindings.JointAcNo.inputValue lt yourscope.beanreference.number}

  The numer attriute in the beanreference automatically calls this value bean method and return of type oracle.jbo.Numer.

  Hope this helps,

  Assani

• How to control the default visibility of a column in the grid by using the extension. vsphere.core point ${objectType}.list.columns

  It seems that certain built-in objects have some hidden by default (in the objects tab) the grid columns. For example, the object of vApps has the column "managed by" hidden. How a column in the grid on the tab of object can be hidden by default in the sample of chassis-ui?

  Thanks in advance,

  -Darrell

  It is not possible to control the visibility of the column by an extension point.  The built-in objects using their own point of view of list.