manage requests between acquisition and control program using agilent 34970 A
Hello
I realized an acquisition program of data with labview and agilent 34970, real-time acquisition works very well with a time you sample of a second... There is no problem
to complete the program and control the taps installed in a photovoltaic system, pumping system
I realized that a second program for the controlit is functional
but the problem is when I merge the two programs in real-time
This error is present at the execution of two programs at the same time, that is to say that they launch two request at the same time the instrument 34970 A
(the poster of agilent 34970A labview crashes)
-------------------------------------------------- --------------------------------------
what I want is to find a little thing programming to manage two outgoing REQUESTS at the same time in LabVIEW instrument and create a kind of delay between two REQUESTS
Sorry for the bad English
Thank you
If you are in the same executable, semaphores works well. You lock the semaphore before making your order and demand. Release after you get your data. If the lock is already taken, then the semaphore just will wait until the lock is available. Only one process can act both in this way.
Tags: NI Software
Similar Questions
-
Difficulty to access the updates and downloads with very slow wifi ("country"). Is it possible that I can download some updates and new programs using my MaBbook Pro (retina) on a public site in the city and transfer them on my iMac which is too heavy to cart autour?
New programs, Yes.
Updates, depends on what you're updating.
-
What is the difference between Fdisk and Chkdsk programs?
Hello:
I don't think I have a common question of OS knowledge and I worked a lot with both, however for years so I forgot everything I used to know. I was talking to someone Executibles MS-DOS command line and this person I know told me in email and I did not at the moment, but he said the following:
"Fdisk and chkdsk are pretty much the same.
Being an old Microsoft OS Engineer I knew it was wrong, however I've been retired since almost 20 years and I have not worked with either for a while. I looked in the KB for articles explaining the difference between fdisk and chkdsk or define at least the two against each other, but there is no specific article I could find. I remember the days when the scariest user had a problem, but they ran all third party software on their computer and have installed BETA version software etc so I'm sure you know the drill and this type of person.
The person who said this about fdisk and chkdsk is one of those people. It is a really nice guy, but a nightmare to Microsoft when you talk to a convenience store to the BONE for assistance. Is there someone out there who could you, please, help me and summarize an irrefutable definition or description indicating the differences between fdisk and chkdisk? I don't remember the basic functions both I widely used both, but too many years have passed and I don't want to sound like a fool trying to write about the differences.
I'd appreciate any help I want to educate my friend and the intention is to not make this person feel like a stupid either.
Thank you, and I expect your response.
Eric
The two are completely different, one is a format utility the other is a utility disk check
http://support.Microsoft.com/kb/255867/en-us
Fdisk was used in earlier versions of victory
http://Windows.Microsoft.com/en-GB/Windows/Fdisk-FAQ#1TC=Windows-7
-
I used the book of images to create a book in iPhoto several times because the line between the pictures and the filling when I use 'Adapt to the chassis', is the same color as the color chosen for the borders of homepage and text boxes. It is seamless.
I just tried to use the book of images in pictures but the line between the pictures and the fill to 'Adapt to the chassis' is white, and not same color I chose for the page border. It is, therefore, very ugly.
Is it possible to remedy this situation?
first get a glimpse of your p = book - Preview a print project in Photos, iPhoto or Aperture to avoid problems - Apple Support - so you can see exactly what will be printed
You cannot change how the program works so if the problem persists in the overview say Apple about the bug - http://www.apple.com/feedback/photos.html
LN
-
Arduino/LabVIEW input acquisition and control engines step by step at the same time
Hey, I'm doing my last year of electronic engineering project and I'm trying to control 2 Motors step by step with labVIEW. A microphone will be placed on a platform that the stepper motor control and adjusts the position of the platform according to noise levels read from the microphone. To control stepper motors, I use 2 controllers engines step by step Sparkfun.com.
https://www.SparkFun.com/products/10267
These controller requires input of pulse. I'll use a DAQ 6008, but I don't know if this can produce a pulse? I also thought using the Arduino to control stepper motors that work perfectly with the controllers, but it would be able to order the engines while gaining an analog voltage to the microphone?
I appreciate any help you can give.
But you can use LabVIEW to work with the Arduino using the tools described here http://sine.ni.com/nips/cds/view/p/lang/en/nid/209835
-
Choose between chance and control
I have 2 questions.
1. I have a random number and a control. My indicator value must be equal to the value of my control, however, when the user presses a Boolean button, a random number to be generated, the random number generator should always take precedence over the control.
2. If I want to select the [2 4 6 7] random number of these 4 numbers only, which will be the best approach, because the random number generator generates the values in the range 0 to 1, but I want a random number of only these four numbers, i.e. 2 or 4 or 6 or 7
Thank you.
ade77 wrote:
I posted the vi, the way I imagined to be, but as what you posted, when I click on the button rand, it takes on values inputing, instead of just value, up to a new pressure.
Then, use a structure of the event, for example.
-
How to close contacts between prospects and notation programs?
I've implemented a program challenging 1 week, whereby cases of potential prospects will receive our week 1 "here are some tips for you' type series and will be scored based on their interaction with this series of emails.
For scoring, I use the standard ' BP programs - Lead Scoring "that accompanies our instant Eloqua on setup. It was an excellent program of scoring for us on other programs to feed lead, but does not quite correspond in this situation.
What the BP - program Lead Scoring is currently:
- The main potential goes first through the program and then explicit into implicit program, and then it is removed at the same time.
- Update every few hours Eloqua pushes a contact and one of our contacts that have a certain threshold score is pushed into SalesForce.
What I need the BP - program Lead Scoring to make:
- It should continue to do what he did, and...
- If the contact has received an email from our week 1 feed program (which indicates that they are in this program) he must fend off the head contact 1 week program, instead of simply remove from lead scoring to feed and let it sit in limbo until SF it resumes.
- Contact still needs to get pushed in SF, but it must also have pushed back in week 1, feed the program so that they will receive all the emails that we promised and you have an additional opportunity for qualification.
All the world faced a similar need? How did solve you this?
Any suggestions?
Thank you!
What is the trigger that puts people in your notation program? It's a program loader or a step in your innate program?
If this is a step in your innate program, you could use step 'Add program' instead of 'Move to program? " 'Add program' does not their current step remove.
If it's a program loader, my comment would be that people can be in several programs at the same time. That means, if they are in the challenging program of 1 week and your feeder program puts in the Score to lead program, they will not necessarily be removed from the stimulating program. It depends on the way in which the rules are set up of course.
Does that help?
-
I am running Windows XP and suddenly find that Firefox fills my whole screen. Of course I pressed a key combination that has created this problem, but I can't get it back to normal. The Firefox toolbars at the top of the screen disappeared and so I can't access my favorites. The windows at the bottom of the screen status bar disappeared. Help, please!
Apparently, you have set Firefox to auto update. He has probably updated to the new version, Firefox 4.0.
To check if this is true, go to your bar menu at the top of the screen. If you don't see the menu bar, you can activate it by right clicking on an empty area in the upper part. Of this, you should see the menu bar, toolbar Tools Navigation, Bookmarks Toolbar, toolbar add-on, etc.. Click on those you want to activate.
Once this is done, you can check your plugins to make sure they are up-to-date with the latest security patches.
Please come back here and click on solved if it solves your problem, so that others with the same problem can find the answer quickly.
01/04/11
-
Problems of restoring a backup of Windows Vista backup and restore program
I recently had to completely reinstall Windows XP, then the Vista upgrade, to fix a problem with updates of Microsoft.NET and ATI graphic driver. In may, I made a full backup of my laptop using Vista resident backup and restore program, using an external hard drive to store the backup. When I learned that I had to reinstall the operating system, I did another backup in August (but not complete) using the same program. Just after this backup in August, I did the reinstallation of operating systems, with the help of the phone of Dell. My original problems are solved.
When I was ready to use the restore the Vista program, I had to choose among the two sets of data (May to August) about which I wanted to restore on my laptop. I chose August, thinking that it would be later. However, in Outlook, all my saved e-mail messages are gone, I have no e-mail address book and any current calendar entries. These are the only things I noticed up to this and are not, but I have not checked all the files... they are large enough.
The folder on my laptop which normally contains my Outlook data files shows only a file Archive and the very small current .pst data file for 7 messages in my Inbox.
It seems that the backup of August was important to may backup and maybe most of my Outlook data are in the may backup. How to get data from two backups in my laptop? When the backup is a folder with the same name, you have the opportunity to write about it, not copy, or copy it and have 2 folders.
I tried to copy all the data from the external hard drive in the folder of Outlook data on my laptop. It will eventually be several files, and Outlook reads only the more recent, so I don't always get access to the data that I hope is here!
Can someone please? My life is in my calendar, I lost years of e-mail addresses, and much saved messages that contain important data. Thank you!
Hello
You must import the Outlook.pst files from backups in your current Outlook. Copy your gift
Outlook.pst file somewhere else as a backup incase you made a mistake. If necessary you can IMPORT
New in Outlook. If you import all your old Outlook.pst files into your new perspective you should have the
total sum of all. Import e-mail messages, and then click contacts.How to migrate to Outlook 2007 and Windows Vista
http://www.vista4beginners.com/migrate-to-Outlook-2007-and-Windows-VistaMore help here Discussions and focus groups:
Discussions of Questions General Outlook
http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Outlook.General&lang=en&CR=usMicrosoft.public.office.setup discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.Setup&cat=en_us_642d5640-c1ba-43C3-A224-b3ec1473346c&lang=en&CR=us-----------------------------------------------
Some tips on the Outlook backup, you can use. Also save the Outlook.PST file occasionally by copying
He's somewhere else.Back up Outlook data with the tool backup Microsoft Outlook personal folders
http://Office.Microsoft.com/en-us/help/HA100758021033.aspxWith the help of the tool backup Microsoft Outlook personal folders
http://Office.Microsoft.com/en-us/Outlook/HA010875321033.aspxOutlook 2007/2003/2002-in Add-in: Personal Folders Backup
http://www.Microsoft.com/downloads/details.aspx?FamilyId=8B081F3A-B7D0-4B16-B8AF-5A6322F4FD01&displaylang=en
Rob - bicycle - Mark Twain said it is good. -
1001 error code in the registry when you try to remove an old program using programs and features in Control Panel. How can I fix?
Computer Windows 7
Tried to reinstall the older version, she received error 1001 something again with the registry. Does not remove old software.
Hi Carol,
1. what program or software you are trying to delete?
2. What is the code or an exact error message?
Please provide us with more information on the specific question, to find a solution as soon as possible.
Follow the link below and check them with the question:
Solve problems with programs that cannot be installed or uninstalled:
http://support.Microsoft.com/mats/Program_Install_and_Uninstall/
I hope this helps.
-
Lightroom 6 suddenly very slow. All my changes drag on the screen at least + 10 seconds. The screen seems frozen between each edition. I use a macbook pro and all my programs are up to date. Help, please
Hi janeslens,
- Go to Lightroom > Preferences.
- Also please go to preferences > Performance tab and uncheck the box "use graphics processor.
- Restart Lightroom and see if it works.
- Please make sure you also update of Lightroom to the latest version, which is 6.3 Lightroom
Let me know if it helps.
Kind regards
Tanuj
-
How to communicate between JSP and jsf/jspx/managed bean using ADF11gR2
Hello
Scenario1.
I use Jdeveloper 11 g R2, I am developing an application in the ADF. In our application, we implement of payment gateway.
Application of the ADF, we call payment gateway.inside the payment2.jspx
PaymentGatwayManagebean Method callPaymentGatway()
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
* < af:commandButton text = "#{res ['makepayment_2.totalpaymentthroughknet ']}" id = "cb1" action = "#{makePayment2.callPaymentGatway}" / > * "
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
public void callPaymentGatway() {
> System.out.println ("Hi callKnetMethod method called");}
> String payUrl, payId = null;
> HashMap hm = new HashMap();
> HttpServletRequest request = (HttpServletRequest) (JSFUtils.getFacesContext ()) .getExternalContext () .getRequest ();
> logger.info ("-> callKnetMethod method called");
> hm = KnetUtils.knetInitialize ("1", "2", "3", "4", "5", "6", "7");
> payUrl = (String) hm.get ("PayUrl");
> payId = (String) hm.get ("PayId");
> request.setAttribute ("knetRedirect", "true");
> try {}
> KnetUtils.knetPay (payUrl, payId);
>} catch (Exception e) {}
> e.printStackTrace ();
{>}}
the above method called Paymentgateway after response from gateway payment successful return transaction with some data as the id of the transaction, the name of the Bank, amount, train etc. all data by adding to the URL
Exodus http://192.168.102.41:7101/amificweb/faces/ami/repback.jsp?paymentId="+paymentId+"& result ="+ result +"& auth ="+ auth +"& ref ="+ ref +"& postdate ="+ post +"& trackid ="+ trackid +"& amp; tranid = "+ tranid + ' & udf1 =" + udf1 + ' & udf2 = ' + udf2 + ' & udf3 = "+ udf3 +" & udf4 = "+ udf4 +" & udf5 = "+ udf5;
*Current repback.jsp page*--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
> String paymentId = request.getParameter("paymentid");
< %
Payment gateway data take into repback.jsp
> String ErrorNo = request.getParameter("Error");
> String udf1 = request.getParameter("udf1");
> string udf2 = request.getParameter("udf2");
> string udf3 = request.getParameter("udf3");
> string udf4 = request.getParameter("udf4");
> string udf5 = request.getParameter("udf5");
> System.out.println (request.getParameter("result").toString ());
> if (request.getParameter("result").equalsIgnoreCase ("CAPTURED")) {}
> result = request.getParameter("result");
> are later = request.getParameter ("postdate");
> tranid = request.getParameter("tranid");
> auth = request.getParameter("auth");
> trackid = request.getParameter("trackid");
> Ref = request.getParameter("ref");
>
> out.println ("REDIRECT = http://192.168.102.41:7101/amificweb/faces/ami/*voucherPrinting1.jsp*?paymentId="+paymentId+ "& result =" + result + "& auth =" + auth + "& > Ref =" + ref + "& > postdatent =" + postdatent + "& trackid =" + trackid + "& tranid =" + tranid + "& udf1 =" + udf1 + "& udf2 =" + udf2 + "& udf3 =" + udf3 + "& udf4 =" + udf4 + "& udf5 =" + udf5 "); {} else if (request.getParameter("result").equalsIgnoreCase ("CANCELED")) {
> result = request.getParameter("result");}
>out.println ("REDIRECT =http://192.168.102.41:7101/amificweb/faces/ami/Error1.jsp?paymentId=" + paymentId + "& result =" + result + "& ErrorText =" + ErrorText);
>}
> % >-
In the present scenario I can redirect from repack.jsp to voucherPrinting1.jsp and I can take all of the data in the jsp page.
But I want all the data * CallPaymentGatwayManagebean * method, how can I do. ?
How communication between jsp and jsf, jsff, jspx, managedbean?
MaroofYou must save the config.xml file adfc bean in the scope of the request this ways you can call the method any page bean.
Also have you tried using the pages in a taskflow with jspx and saving the bean in the taskflow which is a better approach?
-
I tried to fix the spooler sys error app in question, that I asked previously about Adobe flash plugin crash
When I go to control panel and select Programs - turn off features the window if poster where the list would be, says wait then nothing appears
I can't select the LDP and the LPR I read as the solution, I can also change the Internet printing Client because the list of options does not appear
Hi Falcon,.
I came to find this article pertaining to your question. There may be suggestions that you have already tried, try again with the others and an update on the same. Let's see if it helps.
I hope this helps!
-
Hello, I use Windows 7 on a HP G60 laptop. I disabled Windows Defender and Microsoft Security Essentials because I started running free Panda and Malwarebytes Antimalware version. Now an error window Defender blocking access and control of a large number of programs, the window message trying to force me to turn Defender. Disabling Security Essentials is causing other things to not work. I can not yet re - turn on Defender, if I try clicking on the link in the error window, it will not restart, expires. Tried to turn it back on using the Task Manager, but there is no response at all if I click Start. Access to Services and programs in the start Panel are all both blocked by Defender error window. I actually want defender and Security Essentials, because they are redundant and are in conflict with other programs I am running, but apparently they cannot be disabled without blocking access to my computer. I thought it was harmful to run all these programs of security in conflict between them, now I can't use my computer at all. Thanks for any advice you can give me.
Thanks much for the advice. I have a few other questions. Defender is not separated from the essential? Then uninstall Security Essentials would have no effect on the Defender isn't it? My problem is that Defender deactivation now blocks access to many other programs with a Defender error window. I read that Essentials was supposed to replace defender and Defender should have been stopped or disabled when Essentials has been installed. Is this correct? I didn't, got them both running. When I installed Panda, I got a notification from Windows on the conflict and choose which program to use. Although I chose my own safety programs at the time, which was never disabled Defender or kept from running. So I finally did it manually by accessing the properties in Services to change the startup type to disable, which is when all the trouble started.
-
Switching between microphone and line-in in the Realltek Sound Manager
Ok.
Now I know where the Realtek Sound Manager, and I can control the parameters of the microphone and speakers.
But how can I switch between microphone and line-in?
At the moment I don't see a line of component option snap at all. Is it because it's a kind of auto detect and the opportunity every time I connect something?
Everyone knows this, or has some experience in this regard?
Cordially in advance
FransSorry but I don't understand what exactly you want.
You have built in mic or you can use the external microphone connected to the mic-in port.
When the external microphone is connected a resident will be disabled.The question is: what do you want exactly and for what purposes? Please explain what is the reason for this switching between mic and line-in port?
Maybe you are looking for
-
I have a 1st gen apple TV that has a? on the screen at startup
When my apple tv boots high or is the light flashes before the factory reset and on the screen, it displays a? on a picture of the device. I think she may be dead, I can't hear the drive spin up like it used to.
-
I received an email from hotmail.com to respond and update my personal information so that they can update their records as they have apparently lost some files. Please let me know if this is legitimate or not...
-
HP Officejet Pro 8625: Computer intermittently loses its connection to the printer HP 8625
I managed to install the 8625 printer using the wireless connection. I can print the 8625 as well as the printer of HP 7520 to my wife who is on the same network. Later in the day, without the help or make changes to the computer or the printer, I ca
-
Date incorrect journal Telec.
I sent a fax on 22/11/2011. Fax log says that it was sent on 22/12/1997. How can I fix the date of the fax?
-
PS 11 elements and the Nikon D750
I just bought a Nikon D750. I found that my PS elements 11 will not recognize my raw files. It is written: template file to camera that is not supported by the installed version of camera raw. Is there than a camera raw in I can go to so these files