Management of errors with the return code
HelloI set up an email notification which is the last step in case of failure and success. As I am manages all stages with a link (red arrow) KO, ODI handles any error that occurs and so there is never a return code different from 0 (success). It's great because the administrator receives an email with detailed error information, but the process is performed by an external Scheduler and IT operations wants the Scheduler must be notified by the return code if an error occurs.
How can I do both: manage a mistake and will continue to receive a return code other than 0 on the command line?
Thank you
Matt
In your package.
For the final step before sending the mail.
Create 2 steps (which will be the same), with both the same send email step.
Put the green arrow of your last treatment for the first shipment of e-mail, it will be your end if no error.
Put the red arrow of your last treatment for the second e-mail was sent, it will be your end if there is an error.
After the mail error put another step which end in error every time, as a procedure that calls a ' select * of fgfhfju "(if you don't have a table of fgfhfju) and bind this step with a green arrow at the stage of email from error.
You can now separate finishing way in your package, one for the error and another for the right side.
Hoping to help.
Kind regards
Brice
Tags: Business Intelligence
Similar Questions
-
I try and install the SK and it fails for Web and ISO Setup > DVD drive. Same error every time:
12:22:50 Wednesday, July 11, 2012: C:\Program Files\Microsoft SDKs\Windows\v7.1\Setup\SFX\vcredist_x64.exe install failed with return code 5100
The following lines are less useful because they suggest to go to a place that I did not.
12:23:21 Wednesday, July 11, 2012: [SDKSetup:Error] Config_Products_Install: product Installation Microsoft Windows SDK for Windows 7 (failure): Please refer to Samples\Setup\HTML\ConfigDetails.htm document for more information. Fireplace: In SDKSetup.Product.ConfigureRelatedSfx () at SDKSetup.Product.ConfigureNewProduct (ManualResetEvent CancelEvent)
12:23:21 Wednesday, July 11, 2012: [SDKSetup] Config_Products_InstallNew: complete the installation of the new product: Microsoft Windows SDK for Windows 7
12:23:21 Wednesday, July 11, 2012: [SDKSetup:Error] Config_Products_Install: software Windows (failed) SDK installation: Installation of the product 'Microsoft Windows SDK for Windows 7' reported the following error: Please refer to Samples\Setup\HTML\ConfigDetails.htm document for more information. Fireplace: SDKSetup.Product.ConfigureNewProduct (ManualResetEvent CancelEvent) at SDKSetup.Product.SetupProduct (TaskMode taskMode, ManualResetEvent CancelEvent) at SDKSetup.ProductCollection.SetupProducts (TaskMode taskMode, believing believing, ManualResetEvent cancelEvent) to the SDKSetup.ConfigProducts.DoCurrentTask (Group TaskMode)Any ideas what could be worng? The rest of the log file is too big for this message but I can send it to someone who can help.
Hello
I suggest you try the steps listed from the link below,
Windows SDK fails to install with the return Code 5100
-
can someone help with the following code plsql errors...
Hello
If anyone can help with the following code... to get a successful outing.
create or replace package lib_01 as
procedure lib_proc01 (p_user_id in numbers, p_user_name in varchar2);
end lib_01;
create or replace package body lib_01 as
procedure lib_proc01 (p_user_id in numbers, p_user_name in varchar2) as
number of v_user_id;
v_user_name varchar2 (50);
number of v_avl_books;
number of v_avl_days;
date of v_end_date;
date of v_return_date;
Start
dbms_output.put_line ('Enter User Name');
dbms_output.put_line (' username :'|| p_user_name);
Select user_id, user_name in v_user_id v_user_name of user_registration where user_name = p_user_name;
If v_user_name <>p_user_name then
dbms_output.put_line (' username is not.) Please submit full name ');
end if;
If v_user_id is null or v_user_name is null then
dbms_output.put_line ("' user not found");
validate_userLogin;
on the other
validate_issuedbooks (p_issuecount);
end if;
If v_issuecount < v_avl_books then
issuebooks;
on the other
Number of return of late_fee (p_mem_id, p_extradays, p_latefee_total);
end if;
If paid_flag = "Y" then
issuebooks;
on the other
dbms_output.put_line ("' book may be issued due to its maximum reached late fees");
end if;
end lib_proc01;
procedure validate_userLogin is
procedure reg_proc is
procedure user_validate (p_id_proof in varchar2, p_id_no out varchar2) is
v_id_proof varchar2 (20);
v_id_no varchar2 (20);
Start
Select user_name, id_proof, id_no, v_user_name, v_id_proof, v_id_no of user_registration where id_proof = p_id_proof;
If v_id_proof = "Adhar_Card" then
dbms_output.put_line ('user a valid proof of ID');
dbms_output.put_line (' and the id no. :'|| is p_id_no).
on the other
dbms_output.put_line ('Invalid ID evidence.) Please submit valid proof of ID ');
end if;
exception
When no_data_found then
dbms_output.put_line ('No Data found');
end user_validate;
procedure member_validate (p_mem_id series)
v_mem_flag char (1);
curr_date date: = sysdate;
date of v_mem_enddate;
Start
dbms_output.put_line('Mem_flag:'|| v_mem_flag);
Select mem_flag in the v_mem_flag of user_login where user_id = v_user_id;
If v_mem_flag = 'n' or v_mem_flag is null then
dbms_output.put_line ('The User do not have membership');
on the other
Select mem_id in the v_mem_id of user_login where user_id = v_user_id;
dbms_output.put_line ('the user has membership');
v_mem_id: = p_mem_id;
Select mem_enddate in the member_login v_mem_enddate where mem_id = v_mem_id;
If v_mem_enddate < curr_date then
dbms_output.put_line ('Membership has expired' | v_mem_id |' on ' | v_mem_enddate);
on the other
dbms_output.put_line ('User a validity again' | v_mem_enddate);
end if;
end if;
exception
When no_data_found then
dbms_output.put_line ("' no data found");
while others then
dbms_output.put_line (' another error.) Please find");
end member_validate;
Start
insert into user_registration values ('& first_name ',' & last_name', null, ' & user_type',)
address_ty ("& bldg_no",
'& bldg_name',
'& Street',
' & city ",
'& State',
'& zip'
),
user_phone ',' & user_mail ',' mem_idproof', ' & id_no');
Dbms_output.put_line ('user is properly registered');
exception
When no_data_found then
dbms_output.put_line ("' data not found");
end reg_proc;
Start
Dbms_output.put_line (' enter ID or user name ');
Dbms_output.put_line (' username: ' | p_user_name);
If v_user_name is null then
Dbms_output.put_line ('user not found');
reg_proc;
Insert user_login SELECT user_id_seq. NEXTVAL, user_name, NULL, mem_id_seq. NEXTVAL, user_type FROM user_registration WHERE user_name is lower (p_user_name);
Dbms_output.put_line (' because the user wants to have the membership? ");
Dbms_output.put_line ('If Yes, please pay dues");
INSERT INTO member_login SELECT mem_id_seq. CURRVAL, SYSDATE, SYSDATE + avl_days, 500, 'Y' of user_login ul, bl book_loan WHERE ul.mem_type = bl.mem_type AND user_name = p_user_name;
END IF;
exception
When no_data_found then
dbms_output.put_line ("' no data found");
When too_many_rows then
dbms_output.put_line (' too many lines).
END validate_userLogin;
procedure validate_issuedbooks (p_issuecount series)
number of v_issuecount;
Start
Select user_login u, bl book_loan, avl_days, avl_books in v_avl_days, v_avl_books where bl.mem_type = u.mem_type and user_id = p_user_id;
SELECT count (case when end_date < end return_date then p_mem_id) as invalidcount in v_issuecount from book_count where mem_id = p_mem_id;
v_issuecount: = p_issuecount;
dbms_output.put_line (' no. books that the user contains the :'|| p_issuecount);
end validate_issuedbooks;
procedure issuebooks is
procedure book_avl (p_avl_now_flag in p_avl_date Boolean, date) is
v_avl_now_flag char (1);
date of v_avl_date;
procedure reader_bookissue is
Start
insert into values drive (p_user_id, v_book_id, sysdate, sysdate, null);
insert into book_count values(p_mem_id,v_book_id,sysdate,sysdate,null);
Update book_availability set issued_to is "Reader" where book_id = v_book_id;.
end reader_bookissue;
Start
Select book_name, b.book_id avl_now_flag v_book_name, v_book_id, v_avl_now_flag of the book b, book_availability b where b.book_id = ba.book_id and ba.book_id = p_book_id;
If v_avl_now_flag = "Y" then
dbms_output.put_line ('the book is available for issuance' | v_book_id);
on the other
Select mem_type in the v_mem_type of user_login where user_id = (select user_id from book_availability where avl_now_flag = 'n' and book_id = p_book_id);
If v_mem_type = "Reader" then
reader_bookissue;
dbms_output.put_line (' the book is with Reader.) Please try tomorrow.') ;
on the other
dbms_output.put_line ('the book is member');
end if;
Select avl_date in the book_availability v_avl_date where book_id = p_book_id;
v_avl_date: = p_avl_date;
dbms_output.put_line (' the available date is: ' | p_avl_date);
end if;
end book_avl;
Start
insert into book_count values(p_mem_id,p_book_id,sysdate,sysdate+v_avl_days,v_return_date);
Update book_availability set book_id = p_book_id, avl_now_flag = 'n', avl_date is to_date (sysdate + v_avl_days,' dd-mm-yyyy ""), issued_to = v_mem_type, user_id = p_user_id where mem_id = p_mem_id;
commit;
dbms_output.put_line ("' the book published successfully");
end issuebooks;
Number of function return late_fee (p_mem_id in number, p_extradays series, p_latefee_total number) is
number of v_extradays;
number of v_latefee_total;
number of v_latefee_per_book;
number of v_latefee_per_day;
number of v_book_count;
Start
Select trunc (sysdate) - v_end_date in v_extradays from book_received where mem_id = p_mem_id and book_id = p_book_id;
p_extradays: = v_extradays;
v_latefee_per_book: = v_latefee_per_day * v_extradays;
v_latefee_total: = v_latefee_per_book * v_book_count;
p_latefee_total: = v_latefee_total;
dbms_output.put_line ('The total AMT for not returned books' | p_latefee_total);
end late_fee;
end lib_01;
Hello
I checked the first 10 lines after the beginning and I could count already several errors.
Is it an exercise or a real code, you must provide?
Kind regards.
Alberto
-
Hello
Dose anyone know how to fix the error with the code: 0xe7210001, message: unable to load powrprof, object: CLSD-no-it is found;
OR: Fingerprintsoftware OR error: replicas THotkey.exe message window and the computer freezesMaleware scanned and virus, also in safe mode, found no infection, reinstalled driver fingerprint, but nothing has changed.
grateful for the help!
Hello
> message: unable to load powrprof, object: CLSD-no-it is found;
In my view, this would mean that there is a problem with Toshiba Power Saver
What laptop Toshiba, you have exactly?Maybe reinstall Power Saver could help. You can find it on the official website of Toshiba.
-
you receive an update with the 80243004 code error
whenever I'm trying to update windows, you receive an error with the code 80243004.plz to help to get rid of this problem.
My operating system is windows vista.Hello
1. What are the updates do not install?
2 did you change on your computer?
I suggest you to follow the methods and check.
Method 1:
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
Method 2:
I suggest to perform the clean boot, try to installed updates and control.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Method 3:
How to reset the Windows Update components?
-
Get "I/o Error" with the 0x8078002A error code when I start a backup.
* Original title: IO Error Message - I am an amateur
When I start a backup of my hard drive to my external hard drive, I get an error that reads "I/o Error" with the 0x8078002A error code. I am a real novice. I can do either fix it or work around this problem?
Hello
Welcome to the Microsoft community.
Try the steps in these articles:
Error message when you try to perform a full backup on a Windows Vista-based computer: "" the request could not be performed because of an i/o device error".
http://support.Microsoft.com/kb/952272
Note: It is applicable for Windows 7 as well.Perform a clean boot:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article. -
Error with the Code of execution of RIM signing Key (RRT)
Hello
I changed my request but,
When I try to run my program, I get an error stating:
Error at startup MyProgram: Module "MyProgram" to be signed with the RIM Code Signing Key (RRT) DURATION.
I can help with this question.
Additional information:
BlackBerry JDE 4.5.0
JDK 1.6.0
Device: BlackBerry 8320
Thank you
I do not understand your question.
Any program accessing a secure API requires the signatures to run on the device (it's OK on the Simulator). They keys are available from the RIM for $20.
Once you have the key, you can sign all applications you develop for the platform of BB.
You can order the keys here:
http://NA.BlackBerry.com/eng/developers/javaappdev/codekeys.jsp
-
communication error with the server. callback failed for the data entry page
Hello
We have recently applied the corrective update EMP on EMP 11.1.2.0 111.2.1.
We have following the architecture,
database server: sql server 2005
Server Foundation (OS = windows server 2008): HSS, EPMA, Manager Calc, EAS, EIS, provider's server, planning
Essbase Server (OS = windows server 2008): essbase
After you apply the patching EMP 11.1.2.1, we apply after Electrodes for IE 9 compactibility i.e EMP 11.1.2.1.600 patches
1. patch 14119724 (Workspace)
2 14142678 patch (Shared services)
3 patch 14224664 (EPMA)
4 patch 14464109 (planning)
After you apply above patches, all users get error when opening planning web form through the workspace of all client computer.
"* error communication with the server. callback failed for the data entry page. "
When restore us only planning patch 14464109 , issue of "communication error with the server. callback failed for the data entry page "get resolved for all users, but failed for a single user IE"user xyz" "
the user xyz have OS = windows 7 and IE 8
user xyz can take foundation server RDP can open any form of planning successfully in vain get when doing the basic machine.
I have following question:
1. Why do we get error "error communicating with the server. callback failed for the data entry page"after you apply the fixes to IE9
2. after cancellation all patches or planning one patch, why the user xyz always get the error but not other users
Thanks in advance
Published by: 922755 on June 7, 2013 16:08It might be useful to have a read of the following doc Oracle Support - "error:"error Communication with the server. " "Callback failed for the data entry page" when you open a Web form of planning with the members of the Type of text [ID 1392689.1].
And then this question should be resolved en.600
See you soon
John
http://John-Goodwin.blogspot.com/ -
Defined column ambiguous error with the Merge statement
Hi guys,.
I get the ' Error (136,4): PL/SQL: ORA-00918: column ambiguously defined "error with the following query of fusion,
I tried to solve the problem in a lot of ways, but no use. Please help me solve this problem. If you want more details, I'll give you.MERGE INTO Inv_Stk_Trns_Tail a USING (SELECT b.*, c.* FROM OLR b ,Inv_Stk_Trns_Tail c WHERE b.Trn_Type <> '0' AND b.VoucherType IS NOT NULL AND b.VoucherType = 'SF' AND b.Item_Code = c.Item_Code AND c.PROPERTY = 0) src ON (a.Sl_No = src.Sl_No and a.Ref_No = src.Ref_No ) WHEN MATCHED THEN UPDATE SET Item_Avg_Ppr = src.Opn_Avg_Cost, Rate_Bc = src.Opn_Avg_Cost;
Thank you
RAMSELECT B.*, c.
Try all the (necessary) columns on the code and the name of each column a unique alias.
-
Until the latest update when the url I wanted in the address bar of AutoComplete has been selected, it "accompanies" no more further by clicking on. I must now click the refresh arrow. It won't work even with the return. How can I operate the old way easier?
You can disable this extension in tools > Modules > Extensions and close and restart Firefox normally.
-
Satellite L350-214 - error with the software Reeltime
Hello
I have a Satellite L350-214 with Windows 7 Pro and have encountered an error with the software Reeltime, I uninstalled and reinstalled and still get the error below. Any help or assistance would be great
Tony Miller
Log name: Application
Source: Windows Error Reporting
Date: 2010-11-30 12:27:58
Event ID: 1001
Task category: no
Level: Information
Keywords: Classic
User: n/a
Computer: Tony-TOSH
Description:
Fault bucket 1223018385, type 5
Event name: CLR20r3
Answer: No available
Cabin ID: 0
Signature of the problem:
P1: tosreeltime.exe
P2: 1.0.0.0
P3: 4a769d0e
P4: WindowsBase
P5: 3.0.0.0
P6: 4b5950b7
P7: a86
P8: 18
P9: System.InvalidOperationException
P10:
Attached files:
C:\Users\Tony\AppData\Local\Temp\WER7C9E.tmp.WERIn ternalMetadata.xml
These files are available here:
C:\Users\Tony\AppData\Local\Microsoft\Windows\WER\ ReportArchive\AppCrash_tosreeltime.exe_25c5a6496c7 ad44943ce88637e3389e8a80bd45_07f0c745
Symbol of the analysis:
Recheck for solution: 0
Report ID: d5b71327-fc74-11df-a596-00266c333aed
State: 0
The event XML:
1001
4
0
0 x 80000000000000
37886
Application
Tony-TOSH
1223018385
5
CLR20r3
Not available
0
tosreeltime.exe
1.0.0.0
4a769d0e
WindowsBase
3.0.0.0
4b5950b7
A86
18
System.InvalidOperationException
C:\Users\Tony\AppData\Local\Temp\WER7C9E.tmp.WERIn ternalMetadata.xml
C:\Users\Tony\AppData\Local\Microsoft\Window s\WER\ReportArchive\AppCrash_tosreeltime.exe_25c5a 6496c7ad44943ce88637e3389e8a80bd45_07f0c745
0
d5b71327-fc74-11df-A596-00266c333aed
0
My system specsHey,.
If you get this error Reeltime, you should try Ccleaner. There may be a registry problem and CCleaner might solve this problem. This great freeware and easy tool which you can download here:
http://www.Piriform.com/Check this box!
-
While the resettlement of fs2004, the installation stops at 97% saying there is an error with the file world.cab, this damaged disc 4. Someone at - he found a solution to this?
Thank youWell, if, as you say, the disc is damaged. The solution would be to get another drive.
Although I would have a look at the following:
Take a look at the following: http://support.microsoft.com/kb/258496
I hope that, if necessary, you can get a free replacement disc.
-
My registered copy of XP pro was stolen along with the product code. Can someone please tell me if, A. I have Microsoft blocks the thief to re register the disc, and B is there a way to find out if the drive is used.
Thank you
original title: stolen installation disc
Sorry, but no. It's as if you have lost a wallet with money inside. You cannot visit a Bank and ask if someone spent money, or if the Bank can replace. Carey Frisch
-
KB2518870 and KB2539636 always fail with the message Code 643 and has Code 66
Security for Microsoft .NET Framework 4 updates on... Windows Vista... KB2518870 and KB2539636 always fail with the message Code 643 and Code 66 has. I can't find these codes or the reasons for these failures. This happened for well over a month now. They are reported as of the important updates, but won't install but no problem with the other updates. Should I be worried? Is there a solution to this problem?
Thank you, but it doesn't work anymore. CD don't has not given me the possibility to upgrade the existing installation, so I had to reinstall the system...Kind regardsRicardo -
Problem: getting the return code 7 downloading image
Hello everyone. I get the response from the server in the return Code: 7 when downloading images to my server. Can someone help me? What does this return code?
Thanks in advance.
I have it. Its because my memory server was full. Thank you.
Maybe you are looking for
-
NSZ - GS7 will support a keyboard and a mouse?
I would use a keyboard full size and the mouse. NW Media Player will support this. If it is not in native mode, y at - it an application or download other SW to enable this?
-
23 Pavilion all in one pc: drivers
Is there anywhere I can get the drivers for SM Bus controller and USB controller for a 23 Pavilion all in one pc. Model 23-g017c. HP site lists a USB driver but it will not work. Any help is appreciated.
-
Satellite P300-156 - problem with drivers ATI 3470
I have download the new catalyst 9.3, I exceeded the drivers with mobility modder, but always after the installation, the pilots see 3470 drivers only 3450.What is happening and why Toshiba is not updating the drivers for Satellite P300 on the site?
-
Hello I created a LabVIEW tool that implements XCP on CAN. I have a SHIELD, and my tool works very well with a NI 9862. Now, I transferred my software to another system with the PXI-8513. A normal CAN communication with XNET is working (rest bus simu
-
Windows Update Code 800706BE error
Windows Update does not list the updates it needs. She returns an error code 800706BE - Windows Update encountered an unknown error. Also, I constantly get pop - ups that say 'Windows Modules Installer has stopped working". I tried to install a stan