Management of the problems after the update 27/01/2016 of the files

I edit in PS after LR on most files.

I often put feathers masks extremely on in my files.

Everything was fine until today, after the update.

Now, after recording in PS go back to LR, LR watch preview masks also moulted hard lines.

It does not resemble it in PS, as LR. And it exports with the hard lines of LR.

I tried to update the previews, I toggled and saved with the layers on and outside. This is definitley the layers and it's certainly the way LR is their reading.

Any ideas?

Official Adobe Forum to report bugs:Photoshop community customer family

Already, there may be a thread here on this issue. If so, you can add your vote. If this isn't the case, you can start your own.

HAL

Tags: Photoshop Lightroom

Similar Questions

  • Windows 7 - problems after Windows updates

    When Windows Update 17 new "updates", it due to my new HP computer to not connect to internet.  I talked to HP two hours Monday, 18th and thought we had set.  But the updated Windows Update during the night and the next day he couldn't connect to the internet.  Two hours with HP and finally the gal thought it would be better if I have the option of not accepting updates, or accept only updates Windows or HP.  I did today and do not connect to the internet.  Whenever I have to restore to October 16, which is the last time, he did not work properly.  Help, please!  Thank you...

    Have you tried running the resolution of Internet connection problems after these updates?

    Click Start, type: Troubleshooting

    Press enter on your keyboard

    Do a search for Internet connection

    Double-click the Internet connection problems and follow the wizard to display on.

    Using Windows - Management, configuration, and troubleshooting updates
    http://www.windowslive.com/connect/post/59e9b812-d92c-4dc7-B53C-c1a9ee5bcaf3

    Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

  • Problems after Windows Update on Vista wireless

    It seems that other people have a similar problem, but I'll post this new...
    I've been running Windows Vista Ultimate on my Toshiba laptop for years without any problems.  Earlier this year, I started seeing issues after Windows updates.  The main problem is that after updates Windows, my wireless network is is more noticed and the wireless card (which was installed on the computer, and never had problems before) is not recognized.  I manually installed updated drivers with no luck.  The only thing that has worked is to do a system restore to a point before the updates.  The problem seems to be related to an update in general, I can't uninstall.

    I find it extremely ironic that I have no problems with Vista until Windows 7 is launched. First of all, it's the wireless card, then a problem with a driver graphics card (apparently... which seems to be fixed now) and return to the wireless card.  Should I expect to continue to have problems unless I upgrade to Windows 7?  I can't continue to spend half of my day trying to fix my computer after an update that is supposed to fix the errors, but I don't like the feeling that I am forced to upgrade.

    Hi dabaum77,

    From your post, it seems that the issue was occurring when Windows updates are installed automatically again even after the restoration of the system and that is why I suggest to restore the system again to a point before the updates and download and install Windows updates manually.

     
    Access the link below
    Follow these steps to disable the automatic updates:
     
    1. open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.
    2. in the left pane, click on change settings.
    3. under important updates, choose the option you want.
    4. under recommended updates, select the Give me recommended updates the same way I receive important updates check box, and then click OK. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    Install the updates one by one and check the update is causing the problem to occur. If the problem persists due to a particular update, repeat the process and refrain from settling the problem causing the update to.

    You can also check the update problem in Windows Update history.
     
    Follow the steps to check which day caused the issue:
     
    1. open the control panel (all items view), and click the Windows Update icon.
       
    2. click on the link to view update history.
      
    3. to view the details of a single Windows Update-
    (A) select and right-click on a Windows Update list, and then click details.

    (B) click on close when finished.
     
     
    You can also uninstall the update that is causing the problem to occur, although it is not recommended.
     
    1. to uninstall a Windows Update, you must go to programs and features. There are several ways to find it. One of the simplest is to use the search box on the start menu.
     

    2. in the programs and features, click the link updates installed.
     

     
    3. after a few seconds, Windows Vista will load the list of installed updates. Scroll down the page until you find the update you want to delete, select it with the mouse and then click on uninstall.
     

     
    4. Windows Vista will ask you to confirm that you want to uninstall the update you selected. Click Yes and the uninstall process will begin.
     

     
    5 depending on the size of the update, the uninstall process may take from several seconds to several minutes.
     


    6. wait for the window above will disappear and, if necessary, restart your PC. The update is now deleted.
     

    Aziz Nadeem - Microsoft Support
  • Problems after installing updates in Windows 7

    After you install the updates that have been downloaded automatically, I was commissioned to do a reboot. Yes, I did. Now I have all the icons on my desktop, just the words. Even on Windows Explorer and my computer seems to run slower. I tried to restore to an earlier date (yesterday), but he said that he did not. I use a laptop HP9420US with windows 7 Ultimate and office 2007.
    Thank you for your help.
    Joe

    Updated - I reinstalled Windows 7 for the 7th time. Just look at thise MS Updates.

    Arona,
    Thank you for your suggestions.
    I tried method 1 the first time I recognized that there was a problem. Nothing has changed.
    I just tried method 2 with the same result. I have now many files with IconCache.db.old and
    No new (rebuilt) IconCache.db.
    I don't have the operation of the start menu. I clicked and nothing happens. I can right click
    on it and see properties and open Windows Explorer. I have to use Ctrl Alt Del to
    to stop.
    I ran the program Malwarebytes' Anti-Malware and it found nothing.
    Now my individual windows seem to be transparent at the edges.
    I really want to re - install Windows 7 for the 7th time. MS downloads
    He screwed up, and I'd like to return to a correct functioning.
    Updated - I can't find any file IconCache.db now. What now?
    Thank you for your help.
    Joe

  • When downloading files from internet download sometimes Manager indicates the file name of the downloaded video as videoplayback instead of the original file name

    When you download video files by (internet download manager) most of the time the name of the file downloaded as (video playback) instead of the name of actuly files
    Please let me know how to solve these problems?

    can please also contact you IDM support on this issue?

  • Problems after Windows update.

    A rift developed with our computer after an automatic update sometime in the last 3 weeks and installing windows explorer 8. Often the screen turns blue and displays the message "Kernel_stac_ inpage_error". Since the update and installation of windows explorer 8 the computer starts and stops is very slow. After the white screen, the computer automatically runs a disc consistency check.

    1 uninstall whatever it is named NORTON as well as LiveUpdate via Add/Remove programs.

    2. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    3. close all open applications (that is, anything with an icon on the taskbar).

    4. double-click on the file that you saved in #1 above to run the utility. DO TAP not your keyboard until the race ends, then restart & test.

  • Satellite Pro P300 - after Truesuite update I can't open protected files

    Hello
    Sorry for my bad English, but I came to Italy, and here we do not have any forum that can solve my problem.

    I have a Toshiba laptop pro P300 with fingerprint reader. I use fingerprints to log and protect certain files, simply out of curiosity, he seemed cool...: |
    The problem was born while I recently updated "truesuite access manager. Since I did the update I can not open protected files, I have not read that I have to remove the protection before the update (damn...), but these files are important to me and I have to reopen them.

    To solve the problem at all first I restore the system prior to the update to have the old version and open these files again, but my fingers are deleted and I can not create new prints because the pc said "could not open the sensor. I don't know what that means.
    I thought he needs some drivers, so I reinstalled truesuite Manager to access, several times, I reinstalled the BIOS, I did the scan of the drive and the diagnosis of toshiba, but the sensor still does not work.

    I think that if I can record a fingerprint with the old version of the program I will be protected able to open files again (and I will no longer protect them) because only the old version of the program knows how to decrypt these files, but I do not know how to enable the fingerprint sensor. Could someone help me, please?
    Thank you very much!

    The update of Truesuite comes WindowsUpdate? Or did you download the update from the Web from Toshiba site?

    You can use your backup password (usually its your Windows password) to access the files?

  • The streaming of Media Center PC on Xbox 360 problems after recent updates

    I've been streaming video of my Media Center PC on my Xbox 360 for about a month now.  I've never had problems until I installed the new update today.  Now I can listen to just a show for about 5 minutes then my PC freezes.  My configuration is:

    • Windows 7 (64-bit)
    • NVIDIA GTX295 1 GB video card
    • 8 GB of DDR2 memory

    If there is no additional info that could help please let me know.

    Thank you

    Robert

    Hello
     
     

    1. remember you number updates that you have installed?

    Method 1.
    Use the homegroup troubleshooter.
    a. Please open Control Panel and click on troubleshooting.
    b. click on "Network and Internet", then select the homegroup.
    c. troubleshooting tool find the cause and fix the problem? If this isn't the case, please move on next steps.
     
    Method 2.
    Check the following relevant services.
    a. click "Start", type "services.msc" (without the quotes) in the search bar and press ENTER.
    Note: If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
    b. right click on the "Peer Networking Identity Manager" service and click Properties.
    c. Please click the Stop button to stop the service temporarily.
    d. access to the following folder:
    C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking
    e. delete all files and folders inside.
    f. start the following service gain: Peer Networking Identity Manager
     
    Method 3.
    You can disable the anti-virus software and check if that causes this behavior.
    Temporarily disable the security software installed on the computer and check if the problem persists.
    Disable the anti-virus software
    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
    Method 4.
    If the steps above do not better work that you can do is to perform a restore system just before the point where the problem occurred.
    I have listed a few articles that explain the system restore in Windows 7.
    System Restore: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions
     
     
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • problem after anniversary update of the w10

    I've recently updated this anniversary update of the W10 15Z laptop and now get an error message at startup which reads: "lack of system32\eed_ec.dll". Someone knows how to fix this? Can I copy this file from another computer and paste it in system32 on this laptop? I have tried scannow and no error was reported.

    If you have a Samsung (or Samsung-built Dell) printer, uninstall and reinstall the printer drivers.

  • StorCenter px6 - 300 d SNMP SNMP problem after FW update to 4.0.2.9960

    Hello

    We have a problem in PX6 - 300 d, after the upgrade from version 3.2.3.15290 to 4.0.2.9960, FW SNMP configuration. Ishmael of application allows us to manage matrices. After updating the FW one of storage, the application can no longer collect information. Notify know if there was no change of FW which caused this problem?

    SNMP parameters in storage, are equal, the difference in this version of the FW of storage.

    Thank you for your help

    Adias

    Hi adias.

    There is a newer version of the firmware. I recommend updating to the latest version to see if the problem persists.

    Firmware Version 4.0.8.23976 for px6 - 300 d

  • persistent problems after an update

    Hello

    I hope you can help here

    I have an iMac on El Capitan 10.11.5

    The last update I was last Saturday morning.

    Beware... I'm not very familiar with the technical aspects of Mac (this is why I chose Apple!). And I'm french (bad English).

    I have some questions:

    -impossible to do a restore with the time Capsule (I have all the frames with the story, but a few 'restore' button stays grey

    -my external hard drive (USB) turns off without reason

    -You cannot have a Time Capsule backup since last Saturday (my Time capsule stuff is on my external hard drive)

    Walt, I tried:

    -Restart the Mac

    -throw backup time capsule of 2014 in the trash (ongoing)

    -clean backups Time Machine as 'ongoing'

    -Cannot use the disk repair tool to try to fix my drive time capsule

    I'm sure that you will need more information so don't ask!

    Thanks in advance

    Hello. Have you tried restarting your Mac in Safe Mode?

    -Stop your Mac

    -Wait until your computer turns off and after that press the power button

    -Just after you hear the startup tone, press in and hold the SHIFT key

    -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

    -Once you see office, start a scan Disk Utility to detect and repair file system errors (remember to choose your primary hard drive)

    -Click on the disc to check, then, if requested to solve the problems on the repair disk

    -After that click on verify disk permissions, and then click Repair disk permissions

    -Once the process is complete, stop your Mac and turn it on again after 30 seconds

    I hope this helps!

  • Satellite P300 - problem after BIOS update

    Hello
    I have:
    Satellite P300-20 b
    PSPCCE-05J011RU
    I updated my BIOS with this update of the BIOS of your site (30/04/09, 3, 40 - WIN version)
    My problem is:
    Loading and relocation of attempt of Windows, the following error message is fixed:

    "Technical information:
    STOP: 0 * 0000007 B(0*F78DE524,0*C0000034, 0*00000000, 0*00000000)'

    So I can't respond to a portable computer HARD drive, the HARD drive is defined in the BIOS.
    Also I checked the HARD drive on the virus, it's pure against viruses.

    Could you help me to update the BIOS to a working condition.

    Hey Buddy,

    This stop code means you use a bad SATA controller driver. The installation of XP, to integrate the SATA driver for install XP. There is a lot of discussion on this issue here in the forum.

    For Intel chipset, you will need to download Intel Storage Manager of Toshiba's official site and follow the instructions here to reinstall Windows with the SATA drivers:
    http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

    Solution replacement follow the instructions posted by peterk_1. Setting IDE mode instead of AHCI in the BIOS will help too :)

  • PAVILION NOTEBOOK 15 K7Q21EA #: SCROLLING WINDOWS PROBLEM AFTER BIOS UPDATED 10 (08/03/2016) PAVILION 15 YESTERDAY 16/10/2016

    CANNOT CONTROL THE SCROLLING. CURSOR DOWN TO THE LOW WHAT MAKES IMPOSSIBLE TO SAVE TO A FOLDER

    Hi @STICKMAN5124,

    Nice day! Thank you for your participation in the Forums of HP Support! It is a great location to get resolutions and interact with experts from the community. It will be a pleasure to help you.

    I saw the post and understand that after only a bios updated cursor drops down due to a problem of scrolling.

    Impressive work, do the update of the bios. Kudos to you for this. It is a privilege to work with tech-savvy and technically competent customers like you and we greatly appreciate your business with HP. You have been great to work with.

    Please check in F2 diagnostics if the scrollbar works correctly. If Yes, then you can update the chipset drivers and http://hp.com/drivers touchpad drivers you can also consult with a mouse external further isolate the issue.

    You can also run diagnostics on the touchpad from this link by going to the UEFI F2 diagnostics: http://support.hp.com/in-en/document/c03467259 please run the complete components. If any component fails, please note the failure code. This is done to determine if the problem is hardware or software partners.

    If it passes and scrolling works very well, please perform these updates. If you are still having the same problem on page F2 UEFI (screen) then you could roll back bios after performing a hard reset. Link for the hard reset: http://support.hp.com/us-en/document/c01684768

    • Please perform this step to roll back bios.  Hold down the "Windows" key and the letter "B" at the same time, then press the power also button for about 5 seconds at the same time.

    I hope this helps. I would like to know how this happens. I hope the problem is solved without hassle and the unit works very well.

    Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

    Now carefully and have a wonderful week ahead.

  • Satellite A660 - 190 (PSAW0E) some problems after BIOS update

    Hey,.
    After updating the BIOS for my Satellite A660, I have some problems with toshiba apps 2:

    * 1. HWSetup - is not working. When I try to open it there is an info: *.

    + "Microsoft Visual C++ Runtime Library
    + This application has requested the execution to terminate in an unusual way. +
    + Please contact the support team of the application for more information. » +

    * 2. FN key is not working *.
    (a) after the installation of the package of added value + Toshiba Wizard cards Flash Utility
    * When I hit FN keys I don't see the keyhelper on the screen, pressing FN + F6 or F7 or others - there is no action
    * the keys are not working and I can set up and then

    (b) after uninstalling VAP + Assistant Toshiba + cards Flash Utility
    * When I hit FN key I still don't see the keyhelper, but I can change for example brightness by pressing FN + F6 or F7
    * the keys work correctly, but I can't configure the

    Anyone can solve this problem WITHOUT having to reinstall the system?

    Toshiba Satellite A660-190 (PSAW0E)
    Microsoft Windows 7 Home Premium

    Hello

    Try this:
    -Uninstall the VAP and Flash memory card Support utility
    -Install CCLeaner and clean the system and register using this tool
    -Now reboot the laptop and install the latest version of VAP. Use the VAP Advanced installation option and check if all the components of VAP are checked.
    -After installation of VAP, restart the laptop and test the FN keys.
    -If the FN buttons would not work, install Flash memory card Support utility.
    -Restart and test

  • IdeaPad Z500 brightness problem after bios update

    Hi, I have a Z500 Ideapad with a W8.1 installed on it. I have updated the bios to the latest version but after that I can't control the brightness level more. When I try to do it by pressing the shortcut key it trurns lowest brightness level and I can only fix by pressing the patch at the start of the laptop. I can't go back to the old version of the bios. What should I do? can anyone help please. Thank you

    You can update or reinstall the display driver and check that brightness is identical to the front.

    Steps to uninstall the display driver
    1. open Device Manager
    2. go to graphics cards, right-click, choose uninstall and then restart your computer.

    Download and install the latest video drivers at the bottom of the link given
    http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS032587

  • Re: Satellite L500D - boot problem after BIOS update

    I downloaded the new version of BIOS (v1.4) official Toshiba site to update my computer Satellite L500D (PSLK0A - 00U009). But after the update, Windows 7 cannot start, Windows logo appears for a while then it restarts automatically. Windows then goes into repair mode. I followed the instructions on the screen to fix. But it does not work.
    When I reinstalled Windows, the computer worked fine until Windows Update told me to restart the computer. The computer dies again.

    I think that this version of BIOS has a problem. I wonder if there is a way to downgrade the BIOS to the earlier version. I found some instructions on the net to use the Phoenix recovery disk, but I have no file disk and BIOS.
    Please Please HELP, very appreciate.

    TKS

    Try to install the OS to help original Toshiba recovery image. After disabling automatic Microsoft updates to install. When you get the message about controlled initially available updates and install important updates only.

    Check it once more to see if the same thing will happen again. Display the results.

Maybe you are looking for