Manual duplex, duplex printing does not work on my HP Officejet g85 all-in - One Printer running Windows 7

Similar Questions

• Why windows 7 (64 bit) download does not work for a hp officejet 5610 all-in-one?

  I changed operating systems from XP to Windows 7 (64 bit) on a new Toshiba Portege laptop and downloaded the new drivers from the HP site for my all-in-one Officejet 5610.  Nothing went well.  I can print but not scan, and often copy is extremely slow for no apparent reason.

  I deleted the driver downloaded several times and re-uploaded to start from scratch, but get the message "Fatal error during installation."  I used HP correction for this, did everything it says and ran the download as an administrator.  When the "USB connection" screen, I connect the USB as requested, and I hear my computer accepts this connection.   But the HP installer does not accept or acknowledge inserting the USB key.  It hangs at that time here, and keeps installation disc FOREVER chasing the USB connect screen.

  When I open the HP Solution Center, he informs me that he cannot work because the download of device is not complete.

  There is no file 'help' in the menu 'start '.

  I'm running out of ideas on how to make my printer work properly with the new Windows 7 system.

  Someone at - it suggestions?

  In the case where you hear the ding that the USB cable is connected and that the software does not recognize it, it means that at any given time you connected to the computer via the USB port before running the software. When you do so, Windows takes over and tries to install their own drivers. That causes problems later, when you try to use the software, as it will then not connect when you use the USB cable.

  In this case, you must connect via the usb port and go into Device Manager and remove everything related to your printer. After you do this, unplug the USB cable and restart your computer. When starting BACK, run the software FIRST and then when he asks the USB cord this time, it should recognize the connection.

• IMy printer does not work as it should. HP2510 all-in-one

  It uses to display a preview, however it is more the fact that I also get a notice that says that it is incompatible

  Hi Joyce,

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks like you are facing a problem with the printer.

  It would be great if you can answer this question in order to help you further.

  Have you made changes on the computer before this problem?

  Note: HP 2510 is compatible with Windows 7 see the following Microsoft article for more information.

  http://www.microsoft.com/en-us/windows/compatibility/win7/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win7&Locale=en-us&TextSearch=HP%2B2510%2B&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  I suggest you to see the steps in the following Microsoft article and check.

  Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

  Download Driver: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=303770

  Hope that the information provided is useful.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Scanner EPSON Perfection V200 Photo: PDF button does not work since I use the scanner with an ASUS i5 running Win 7 Ultimate desktop computer.

  The PDF button does not work since I use the scanner with an ASUS i5 running Win 7 Ultimate desktop computer. I downloaded the 64-bit Epson software for the scanner.

  I found the solution to the problem, and it is indeed with the revised in Windows 7 Control Panel.

  Here how to solve the problem:
  Go to the control panel in Windows 7.
  Search scanner in the upper search box to the right
  You will see a "view scanners and cameras".
  Click it, you will see the Epson Perfection V200. Highlight.
  Click Properties, then Yes, then events.
  Where it says select an event, you MUST choose the event suitable for each option.
  To the Start button, choose Start the series of creativity
  For the copy button Choose launch Epson Scan
  E-mail button also Epson scan
  PDF includes Epson scan
  There you go.
  Now, all this was not necessary before, there are no instructions, and the fault lies with MS. how much more confused MS will do the control panel?

• Why my pc does not work no matter what .exe? I couldn't even run diagnostics

  Why my pc does not work no matter what .exe? I couldn't even run diagnostics

  Hi SteliosArmenis,

  Thank you for keeping us posted on the State of the question.

  I see there is that the antivirus installed on the computer could not detect infections. To ensure that the computer is clean, we can run a thorough scan using Windows Defender in offline mode.

  I suggest to download Windows Defender Beta offline to a flash drive, CD, DVD or USB and then perform the steps.

  The articles explain how to create a disk and run the scan.

  NOTE: the program must not not to be run / run from the office.

  http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline

  http://Windows.Microsoft.com/en-us/Windows/Windows-Defender-offline-FAQ

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Hope the information is useful. If you need help with this problem, feel free to post you question in the forum. We will be happy to help you.

• LIP does not work after the installation of a local language, writing in my windows software 8

  LIP does not work after the installation of a local language, writing in my windows software 8

  

  This icon is hidden... and there is no preview in the installed LIP.

  
  I hv uninstall the software, but for the LIPS does not work

  Hello

  You use the Microsoft Account or Local user account?

  Create a new user account and check the status of the question in the new user account.

  Create a user account

  http://Windows.Microsoft.com/en-in/Windows/create-user-account#create-user-account=Windows-8

  You can also refer to:

  User accounts: frequently asked questions.

  http://Windows.Microsoft.com/en-in/Windows-8/user-accounts-frequently-asked-questions

  Thank you.

• Color LaserJet Pro 200 M251 nw: unable to do manual duplex printing with Windows 10

  Using my prior desktop computer that ran from Windows 7, I had no difficulty to do manual duplex printing on my HP LaserJet Pro 200 M251 nw color.  However, having recently bought a new desktop computer running Windows 10, I have more two-sided printing option.  Instructions to Guide the user to http://h10032.www1.hp.com/ctg/Manual/c02886939 are unnecessary because I cannot complete step 3, click Finish.  After completing the first two steps by clicking on file - print and then click Properties or preferences, I am not provided with an option to "print on both sides (manually)" as described in the User Guide.  How can I get manual double-sided printing capability on Windows 10?

  Usually when you have a driver problem, it is best to find the current driver on the HP website, disconnect the printer from your PC, remove the existing driver, and then install the current driver.

  Windows often installs drivers that do not support as many features as the downloadable driver.

  If my post is solved your problem and click the accepted as button solution under him.

  In order to thank a Tech for a post click the thumbs up button under the post.

  You can even click on the two keys...

• Presets does not work; 10.5.8; OfficeJet Pro 8000n

  Hello all-

  I have been using a Business Inkjet 1100d for many years without difficulty.  I created several gifts that worked perfectly.  Currently 10.5.8 System.

  I just bought a new Officejet Pro 8000n and installed all the new software from the CD provided.  I have conducted an audit of the updates and there is not.  The new 2nd printer appear in the familiar print as well as the old printer dialog box.  Each printer can be selected and will work.  However the presets do not work.

  I created new presets with the new selected printer.  I tested the print configuration I saved the preset with and it prints properly (plain paper, rough paper, 2 faces, 8 1/2 x 11 letter, etc., auto source, etc...)  However when I use the preset created for printing it does not work.

  When I change to the new printer to a job, changes in paper size to 8 1/2 x 11 borderless, 2 sides print is disabled, paper is on HP Advanced Photo paper, quality is set to Normal and Source is set to 1 Board.  Selection of one of the presets, for the old 1100D or those newly created for the 8000n have no effect and do not change any of these settings.  I have to manually change each setting whenever I print.

  If I leave the printer selected as the (default) 1100D old presets work correctly (but not the other).  I tried to delete and re-create the new preset several times without success.

  Most of the posts on this topic, I found in looking here seem to relate to the system 10.6, 10.5. not, and so far I have found no obvious answer.  I can't take the time to go through all the settings and change each one for each print job manually.  85% + of my print jobs are project, 2-sided, paper tray 2.

  I've seen a number of messages about problems with the presets does not not in research, so I guess I'm not alone.  Someone at - it any other suggestions?  Thank you.

  Symptom: when you try to use a "Preset" either he does not when you press print or preset will not apply at all.

  Cause: some settings in the print dialog box are specific Application (YOU), in other words, when you call printing, parameters are passed by the application to the print dialog.  What parameters are ALSO may be different with different applications.  For example, HP says that in Safari are WHERE: matching colors, manipulation of the paper, cover Page and Planner.

  In applications that have a 'layout' menu, Type of paper, Orientation, and scale are ACE and NOT stored in the presets (or default rollover of the application). They are passed to the dialog box print from 'Page layout' of the application.

  If no settings in your conflict set with any of the AS specifications that have been put in the dialog print, your willingness to preset NOT work.  For example, if your Type of paper of PHOTO, but your preset specifies the project, or 2-sided printing.

  1-step workaround: the good news is that AS the parameters are modifiable.  Go to your dialog box print and change the setting that conflicts with your preset. For example, replace Type of Photo paper to US letter. Now, when you apply your preset, it will work correctly.

  Solution: most of the conflicts can be addressed in the layout of the application menu. Go to the menu and change the incompatible parameter, for example, Type of paper.  (You may need to save the new configuration to the default settings Page.  If you do not want these new Page Setup default settings for this application, you must create a new preset with specifications that are compatible with existing by default the Page Setup application)

  Exception to the Solution: many (but not all) applications Apple have an anomaly (in the system 10.5, not sure about 10.4) where they pass all parameters AS well.   Examples of affected Apple applications include Safari, TextEdit and preview.  Apple applications that are not affected by this issue include both disk and network utility, QuickTime Player, editor of Script and Automator.  (It may be little 3rd party applications affected as well).  A complete list of applications assigned and unassigned (found on my system) is listed in the message 2 above.

  Apple's technical support attributes this to the fact that OS 10.5 is not 100% compatible with the new printers HP (software).  (10.6 is 100% compatible they say).  Apple suggested that Safari and other applications Apple passing the wrong Type of the dialog box's default paper print do due to the partial incompatibility of the system 10.5 with model new HP printer software.  They had no work around to suggest.

  Bottom line, for Safari, TextEdit, and other problem Apple apps I listed in my applications list (see above), my solution of 1-step workaround apparently is the only solution available.  When you upgrade to Snow Leopard, you should no longer have the problem.  But, if you're on a Power PC Mac and impossible to move beyond Leopard, you're stuck with my 1-step solution.

  1-step workaround above works with all the applications involved however.

• Media Player Windows Media Player does not work. no error message. nothing at all

  Windows media player will not work. no error messages have nothing at all. its like iff, it does not exsist

  Hello

  1 did you changes to the computer before the show?

  2. what version of Windows you use?

  3. what version of Windows media player you are using?

  4 when was the last time you were able to access the drive Windows media?

   
   
  Provide more information about the issue so that we can better help you.

• INK CARTRIDGE 364 (BLACK) DOES NOT MATCH THE HP PHOTOSMART WIRELESS E-ALL-IN-ONE PRINTER

  AT THE END OF THE YEAR, I BOUGHT THE HP PRINTER PHOTOSMART WIRELESS E-ALL-IN-ONE (B110A).  I REPLACED THE COLOR (364) CARTRIDGES, BUT THE CARTRIDGE BLACK (364), I BOUGHT IS NOT SAME SIZE ONE PROVIDED WITH THE PRINTER, IT IS MORE SMALL AND DOES NOT FIT IN THE SLOT.  DOES ANYONE ELSE HAVE THIS PROBLEM?  NOW PRINTER CANNOT USE AS BLACK IS EMPTY AND CANNOT REPLACE IT AS THE 364 PROVIDED WITH THE PRINTER IS DIFFERENT FROM THE PURCHASED SEPARATELY.  VERY FRUSTRATING.

  Thank you

  KERRY

  Thank you Carolyn.  I'll get to watch the 564 cartridge.  Thank you very much for your hope to answer that I can get this resolved otherwise it's back to the PC with the printer world for a refund!

  Thank you

  Kerry

• I can not open a new tab - when I restart my computer (or firefox), ctrl T does not work and the tab '+' next to the tab on my browser window does NOT open a second tab

  Firefox3.6.18, running on Windows XP (all patches from Microsoft), opens with a single tab. By clicking on the tab add '+' or by pressing CTRL T does not open a new tab, even if I open a new window. In addition, when you exit Firefox, my location of the tab is not saved.

  Please click the button solved it next to the answer that solved your problem of Firefox support, it appears when you are connected, so this thread is marked as resolved to help other users who may have this same problem.

• Acer V5 - 571, Bluetooth does not work. The latest drivers and all show peripheral works

  I have an Acer V5 - 571P. I can not Bluetooth to work. It's the last installed Acer driver and Device Manager shows bluetooth devices work properly. Still I can'tconnect my helmet. They are detected and pair up but I get no sound, only speakers in the laptop. Is it possible to transfer its control to bluetooth? What Miss me?

  Thanks for any help/direction you can give me.

  His works now. The problem is that the laptop comes with software for Bluetooth but not Bluetooth module installed. It is a problem if you want to install your own USB Bluetooth key. You have to 'Turn OFF' the Bluetooth in the Device Manager, restart the computer and let Windows install the driver for your new USB device. Then it won't work.

• I downloaded the latest update and now my internet explore does not work as it did before. I use a laptop with windows 7 ultimate with 32 bits.

  Windows 7 ultimate 32 bit

  There is no connection between Firefox and Internet Explorer from Windows.
  What exactly is the problem you are having?

  Perform a file system check to repair the corrupted system files
  Win 7, 8, 10, Vista: https://support.microsoft.com/en-us/kb/929833

• My Microsoft Store does not load on a 23 HP Envy all-in-one. It is said that the user name or password has been used too many times. How can I reset this?

  great, I try to load an app on the store, the message tells me that this can be done. I checked my account on my I Pad and it works.

  When I reset my account, I get a message that I tried the user name or password too often.

  any suggestions how to fix this?

  Hi Monte Schwartz,

  Thanks for posting your query on the Microsoft community.

  Before give you the steps of troubleshooting on this, I would like to know some details about your problem.

  1. Is the issue with the app store or with any other app too?
  2. Are you a specific error code?

  But you can always try some basic troubleshooting steps:

   

  Method 1: Check the updates

  Check if windows is up to date. If there are pending updates then please go ahead and install the updates and try to load the applications through the store.

  You can use the link for additional help to install pending updates below:

  https://support.Microsoft.com/kb/2777982?WA=wsignin1.0

  Note: Also check the date, time and time zone of the system.

  Method 2: Reset Windows Store cache

  1. press Windows + R key.

  2 type wsreset.exe. Press ENTER.

  Method 3: Re-register Windows Store

  I suggest you to re-register Windows App Store and check. Please follow the steps:

  a. press the Windows key + X.

  b. click prompt (run as administrator).

  c. the administrator: command prompt window, type the following commands.

  PowerShell - ExecutionPolicy Unrestricted Add-AppxPackage - registry DisableDevelopmentMode-$Env:SystemRoot\WinStore\AppxManifest.XML

  Reference: http://blogs.msdn.com/b/notime/archive/2013/10/18/fix-store-app-in-windows-8-1.aspx

   

   

  Note: Back up the registry before you edit it. Then you can restore the registry if a problem occurs.

   

  Method 4: Run the troubleshooter of App.

  The Apps store is an automated tool that we have developed to deal with a number of known issues that may prevent applications from running correctly. This troubleshooting automatically solves some issues including the suboptimal screen resolution, incorrect security or account etc. settings. You can click this link to download and run the utility of troubleshooting Apps.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  You can try the above steps and get back to us if you need help regarding the same.

  Thank you.

• try to install the drivers for a printer (hp officejet 6300 all-in-one) in a windows vista laptop.

  I insert the cd but it tells me that it is not supported.

  the cd for the version 6.0. do I need an updated version in order to get my printer working?

  http://h20180.www2.HP.com/apps/lookup?h_lang=en&h_cc=au&CC=au&h_page=hpcom&lang=en&h_client=S-A-R313-1&h_pagetype=s-002&h_query=HP+OfficeJet+6300++printer&submit.x=11&submit.y=6

  For starters, you have given a serial number of the printer, not the printer number.

  Go top HP website, get the right drivers and install your printer.

  Details of HP: http://welcome.hp.com/country/au/en/contact_us.html

  See you soon.

  Mick Murphy - Microsoft partner