Manual mode is fuzzy until after the autofocus mode

I recently bought a refurbished T5. I learned how to use manual mode, and I understand very well now (at least I think). However, I was a problem. I'm going to start shooting in manual mode (lens and body) and everything will be blurred - the image in the viewfinder that I take the picture and the resulting image. I'll then go in autofocus mode, and the image will have very similar parameters and get the Crystal. I'll then go back to manual mode with the same settings as I had the last time I was in manual mode, and the image is now perfectly clear as well through the viewfinder and the resulting image. If I have the correct settings, why not the picture will be clear the first time around? I'm doing something wrong or is there something wrong with the camera itself? Thanks in advance for any help!

I have included some images to help:

So I turn on my camera, the lens configuration and body in manual mode and take this picture. It is 1/80, f 5.6 and (self) ISO 2500.

Then I go my goal and my auto body and get this picture. It is 1/60 f5.6 and ISO 2000.

I then my goal and my body return to manual and get this picture at 1/80, f5.6, (auto) ISO 2500.

How the same settings can produce different images? Did I miss a step or something? Please let me know!

You seem to get the manual exposure mode mixed with the manual focus mode.  They are two different things. On the goal, when you switch to M, you use manual focus. You must turn the focus ring on the lens to focus. On the dial to camera mode, you change Aperture, shutter speed and ISO manually to chane exposure (brightness of the image).

The first time your goal is be blurred. After you return to auto, it twists the ring for you as it so now the lens is in short. Even after that you changed it to M, the lens is always point to the same object... If you aim now to something else more away or closer, then it will be fuzzy in M on the lens.

I recommend that you leave the lens on A. There is no reason to use the manual focus unless you need areal or you understand what you need to do.  Similarly, there is no real reason to use the manual exposure in order to use manual. Use it when you need which means that you must first understand what it can do for you. I recommend your use Av or Tv mode first before trying the M mode.

Tags: Canon Camera

Similar Questions

  • Windows does not start until after the second day to have.

    I just got my laptop Toshiba yesterday with Windows 7 above. I used it for about 4 hours, when I'm done I turned it off by saying it close here go to start > stop. Before putting the laptop on I saw the lights on so I pressed the manual to close button, at the last second, I saw he said something as 341 on 356 updates installed, do not turn off the computer. I don't think a lot because I was tired so the next morning, I try to turn on my laptop and it stops after the Windows 7 load loading animation, and all I have is a black screen with a mouse. I tried to run in safe mode, same thing black screen with my ability to see where is my mouse.

    Contact Toshiba support under your warranty. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • My CD/DVD drive no longer works after installing an update for Roxio Burn, (it was working perfectly until after the update).

    Hi, my CD/DVD drive has stopped working after I installed an update for Roxio Burn. I tried uninstalling and reinstalling, updating all windows and my device driver programs, but I just comes up with one, "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ', warning. The DVD/CD player that I use is called TSST corp DVD +-RW TS - H653G

    Hello

    Code 39 means that the driver is corrupted or missing.

    Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of them.
    Selves at the start because they will be competing for resources. This does not mean that this problem was caused by
    These however is a possibility depending on which and how many you have installed.

    Definitel check with the help of Roxio and their forums - you may need to uninstall Roxio to see if this
    allows the reader to work (not re - install until the issue is resolved).

    -------------------------------------------------------

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    ==========================================================

    After the foregoing:

    References to Vista also apply to Windows 7.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The DVD player does not work after installing Windows 7
    http://support.Microsoft.com/kb/975270/

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
    Setup after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and the
    correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry settings for your
    CD/DVD drive someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays
    all devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • G42 - 490 YOU: what changes can I see or wait until after the upgrade of RAM?

    Hello

    My PC model # is G42-490TU, processor - Intel Core (TM) i3 CPU M370,
    RAM: 6.00 GB (2.93 usable), System Type: 32-bit operating system.

    I've recently upgraded RAM 2.00 GB to 6,00 GB with 2.93 GB usable, that's what it shows.

    I want to know if this 2.93 GB of 6,00 GB usable the correct value of the memory that is made available?

    Also, I want to know what changes can I see or wait after upgrading the RAM from 2.00 to 6.00 GB where 2.93 GB is usable? How does this improve the effectiveness of my PC? Is there something that needs to be done on my own apart from adding the RAM to increase performance and the maintenance of my PC?

    Thank you best regards &,.

    Isha

    The problem is the operating system of your laptop is 32-bit.

    A 32-bit operating system can use @ 3.25 GB installed memory.

    Install additional 4 GB to a laptop that had 2 GB was a regrettable mistake.

    As long as the 4 GB memory module you have is compatible, you'd better remove the 2 GB module and put the 4 GB module in its place.

    You won't find a lot of improvement with the current configuration of a 2 GB module and a 4 GB module. With this memory configuration does not work in dual channel mode.  You would be better with two modules of 4 GB, but this is only if you upgrade your operating system to a 64-bit version.

    In fact, you would have improved if your OS is 64-bit. A 64-bit Windows operating system will recognize and use the installed memory.

    If you really want to improve the performance of the laptop, you should consider upgrading to a SATA SSD 256 GB drive at least.

  • Phone does not start until after the demotion to 4.4.4

    Hello
    I have D5803 running 5.1.1 and I wanted to downgrade to 4.4.4.
    I followed this link:

    http://Forum.xda-developers.com/Z3-c...d5833-t2906706

    and flashed 4.4.4 (23.0.1.A.5.77 - unbranded - USA (1289-7524)) using flashtool.

    Flashing has finished successfully, according to this:

    28/01/2015 15:01:06 - INFO - Flashtool Version 0.9.19.0 built on 29/07/2015 12:00
    28/01/2015 15:01:06 - INFO - execution of search strategies to find the proxy selector
    28/01/2015 15:01:06 - INFO - no proxy not found for IE. Try the next
    28/01/2015 15:01:06 - INFO - strategy firefox could not try a next: installation of Firefox not found
    28/01/2015 15:01:06 - INFO - no proxy not found for java. Try the next
    28/03/2015 15:03:01 - INFO - synchronization of devices on github
    28/03/2015 15:03:01 - INFO - repository cloning devices
    28/03/2015 15:03:18 - NEWS - synchronization of finished devices.
    28/03/2015 15:03:22 - NEWS - device connected with USB debugging off
    28/03/2015 15:03:22 - INFO - line devices of 2011, make sure that you are not in MTP mode
    28/05/2015 15:05:22 - NEWS - selected Bundle for Sony Xperia Z3 Compact (D5803). FW release: 23.0.1.A.5.77. Customization: U.S.
    28/05/2015 15:05:22 - NEWS - preparation of files for flashing
    28/05/2015-15:05:39 - INFO - please connect your device in flashmode.
    28/06/2015 15:06:01 - INFO - disconnected device
    28/06/2015 15:06:37 - INFO - appliance connected with USB debugging off
    28/06/2015 15:06:37 - INFO - line devices of 2011, make sure that you are not in MTP mode
    28/06/2015 15:06:47 - INFO - disconnected device
    28/07/2015 15:07:15 - NEWS - device connected with USB debugging off
    28/07/2015 15:07:15 - INFO - line devices of 2011, make sure that you are not in MTP mode
    28/07/2015 15:07:27 - NEWS - disconnected device
    28/07/2015 15:07:50 - INFO - peripheral connected flash mode
    28/07/2015 15:07:50 - INFO - opener for R/W
    28/07/2015 15:07:50 - INFO - information on the playback device
    28/07/2015 15:07:50 - INFO - ready phone to flashmode operations.
    28/07/2015 15:07:50 - INFO - partition opening TA 2
    28/07/2015 15:07:50 - INFO - current device: D5803 - YT9114XJ39-1289 4696_R5C - 1285 - 6521_23.4.A.0.546 - GLOBAL - LTE_23.4.A.0.546
    28/07/2015 15:07:50 - INFO - partition of YOUR closing
    28/07/2015-15:07:50 - INFO - start flashing
    28/07/2015 15:07:50 - INFO - loader.sin treatment
    28/07/2015 15:07:50 - INFO - verification header
    28/07/2015 15:07:50 - INFO - flashing data
    28/07/2015 15:07:51 - INFO - Loader: S1_Root_9c84 - Version: MSM8974AB_22 / Boot version: S1_Boot_MSM8974AC_LA3.0_L_36 / Bootloader status: ROOTABLE
    28/07/2015-15:07:51 - INFO - the transfer buffer size: 262144
    28/07/2015 15:07:51 - INFO - delivery of start-up analysis
    28/07/2015-15:07:51 - INFO - found a model session. Use: C:\Users\Moshe\.flashTool\devices\D58XX\default.fs c
    28/07/2015 15:07:51 - INFO - partition opening TA 2
    28/07/2015 15:07:51 - INFO - TA unit writes 00002774. Value: [01].
    28/07/2015 15:07:51 - INFO - partition of YOUR closing
    28/07/2015 15:07:51 - INFO - partition processing - image.sin
    28/07/2015 15:07:51 - INFO - verification header
    28/07/2015 15:07:51 - INFO - flashing data
    28/07/2015 15:07:51 - INFO - partition opening TA 2
    28/07/2015 15:07:51 - INFO - partition of YOUR closing
    28/07/2015 15:07:51 - INFO - partition opening TA 2
    28/07/2015-15:07:51 - INFO - write YOUR unit 0000084f. Value: [1A, THIS, 1 d, 00, 01, 00, 04, 05, 00, 02, 02, 08, 00, 10, 03, 00, 02, 04, 02, 05, 00, 01, 03, 02, 00, 10, 05, 00, 03, 03, 05, 00, 10, 0a, 00, 02, 00, A9, 09, BE, BA, A9, 09, 00, 00, 04, 00, 03, 00, 02, 00, 00, 00, 04, 04 B0, 04, 0E] 00, 06. 00, B8 0B 01, 4 B, 00, 00, 00, 03, 96, 00, 2 C, 01, 03, 09, 00, 00, 01.
    28/07/2015-15:07:51 - INFO - write YOUR unit 000008fd. Value: [00]
    28/07/2015 15:07:51 - INFO - partition of YOUR closing
    28/07/2015 15:07:51 - INFO - partition opening TA 2
    28/07/2015 15:07:51 - INFO - dbi_S1_Boot_MSM8974AC_LA3_0_60_AID_4_PLATFORM-MSM8974AC-LIVE-HWID007B40E1-SWID12-OEM1-AID4-DEBUG00_S1-BOOT-LIVE-9C84-0004-MMC.sin treatment
    28/07/2015 15:07:51 - INFO - verification header
    28/07/2015 15:07:51 - INFO - flashing data
    28/07/2015 15:07:51 - INFO - treatment emmc_appsboot_S1_Boot_MSM8974AC_LA3_0_60_AID_4_PLA TFORM-MSM8974AC-LIVE-HWID007B40E1-SWID09-OEM1-AID4-DEBUG00_S1-BOOT-LIVE-9C84-0004-MMC.sin
    28/07/2015 15:07:51 - INFO - verification header
    28/07/2015 15:07:51 - INFO - flashing data
    28/07/2015 15:07:51 - INFO - rpm_S1_Boot_MSM8974AC_LA3_0_60_AID_4_PLATFORM-MSM8974AC-LIVE-HWID007B40E1-SWID0A-OEM1-AID4-DEBUG00_S1-BOOT-LIVE-9C84-0004-MMC.sin treatment
    28/07/2015 15:07:51 - INFO - verification header
    28/07/2015 15:07:51 - INFO - flashing data
    28/07/2015 15:07:52 - INFO - s1sbl_S1_Boot_MSM8974AC_LA3_0_60_AID_4_PLATFORM-MSM8974AC-LIVE-HWID007B40E1-SWID65-OEM1-AID4-DEBUG00_S1-BOOT-LIVE-9C84-0004-MMC.sin treatment
    28/07/2015 15:07:52 - INFO - verification header
    28/07/2015 15:07:52 - NEWS - flashing data
    28/07/2015 15:07:52 - INFO - sbl1_S1_Boot_MSM8974AC_LA3_0_60_AID_4_PLATFORM-MSM8974AC-LIVE-HWID007B40E1-SWID00-OEM1-AID4-DEBUG00_S1-BOOT-LIVE-9C84-0004-MMC.sin treatment
    28/07/2015 15:07:52 - INFO - verification header
    28/07/2015 15:07:52 - NEWS - flashing data
    28/07/2015 15:07:52 - INFO - tz_S1_Boot_MSM8974AC_LA3_0_60_AID_4_PLATFORM-MSM8974AC-LIVE-HWID007B40E1-SWID07-OEM1-AID4-DEBUG00_S1-BOOT-LIVE-9C84-0004-MMC.sin treatment
    28/07/2015 15:07:52 - INFO - verification header
    28/07/2015 15:07:52 - NEWS - flashing data
    28/07/2015 15:07:53 - INFO - partition of YOUR closing
    28/07/2015 15:07:53 - INFO - partition opening TA 2
    28/07/2015 15:07:53 - WARN - cache is excluded from the bundle
    28/07/2015 15:07:53 - WARN - apps_log is excluded from the bundle
    28/07/2015 15:07:53 - INFO - kernel.sin treatment
    28/07/2015 15:07:53 - INFO - verification header
    28/07/2015 15:07:53 - INFO - flashing data
    28/07/2015 15:07:54 - INFOS - fotakernel.sin treatment
    28/07/2015 15:07:54 - INFO - verification header
    28/07/2015 15:07:54 - INFOS - flashing data
    28/07/2015 15:07:56 - INFO - partition of YOUR closing
    28/07/2015 15:07:56 - INFO - partition opening TA 2
    28/07/2015 15:07:56 - WARN - userdata is excluded from the bundle
    28/07/2015 15:07:56 - INFO - system.sin treatment
    28/07/2015 15:07:56 - INFO - verification header
    28/07/2015 15:07:56 - INFO - flashing data
    28/12/2015 15:12:43 - NEWS - treatment amss_fs_1.sin
    28/12/2015 15:12:43 - NEWS - verification header
    28/12/2015 15:12:43 - NEWS - flashing data
    28/12/2015 15:12:43 - NEWS - treatment amss_fs_2.sin
    28/12/2015 15:12:43 - NEWS - verification header
    28/12/2015 15:12:43 - NEWS - flashing data
    28/12/2015 15:12:43 - NEWS - treatment amss_fsg.sin
    28/12/2015 15:12:43 - NEWS - verification header
    28/12/2015 15:12:43 - NEWS - flashing data
    28/12/2015 15:12:44 - INFO - partition of YOUR closing
    28/12/2015 15:12:44 - INFO - partition opening TA 2
    28/12/2015 15:12:44 - WARN - 2212 unit not found in the set
    28/12/2015 15:12:44 - INFO - partition of YOUR closing
    28/12/2015 15:12:44 - INFO - partition opening TA 2
    28/12/2015 15:12:44 - INFO - partition of YOUR closing
    28/12/2015 15:12:44 - INFO - partition opening TA 2
    28/12/2015 15:12:44 - WARN - 2404 unit not found in the set
    28/12/2015 15:12:44 - INFO - partition of YOUR closing
    28/12/2015 15:12:44 - INFO - partition opening TA 2
    28/12/2015 15:12:44 - INFO - partition of YOUR closing
    28/12/2015 15:12:44 - INFO - partition opening TA 2
    28/12/2015 15:12:44 - INFO - treatment elabel-D5803 - row_2014010151307.1_23.0.1.A.5.77.sin
    28/12/2015 15:12:44 - INFO - verification header
    28/12/2015 15:12:44 - INFO - flashing data
    28/12/2015 15:12:46 - INFO - partition of YOUR closing
    28/12/2015 15:12:46 - INFO - partition opening TA 2
    28/12/2015 15:12:46 - INFOS - unit TA written 00002725. Value: [32, 30, 31, 35, 2D, 30, 38, 2D, 32, 38, 20, 31, 35, 3, 31, 32, 3, 34, 36, 00]
    28/12/2015 15:12:46 - INFOS - unit TA written 00002774. Value: [00]
    28/12/2015 15:12:46 - INFO - partition of YOUR closing
    28/12/2015 15:12:46 - NEWS - closing session flash
    28/12/2015 15:12:46 - INFOS - flashing over.
    28/12/2015-15:12:46 - INFO - please unplug and start your phone
    28/12/2015-15:12:46 - INFO - for flashtool, Sources unknowns and debugging must be enabled in phone settings

    Tried to turn on the unit, but he comes to the purple screen, freezes and reboots itself constantly. I can't even turn the phone off.

    What should I do?

    Thanks in advance.

    @ryanjg11

    Re-download flashtool and the file of the ftf > charge the phone for an hour about > press and hold the power & volume 10 seconds > repeat the decommissioning process

    https://talk.sonymobile.com/T5/Xperia-Z2/how-to-manually-update-downgrade-root-2014-Xperias/TD-p/593...

  • Laptop does not start until after the virus attack

    Last night I was browsing the web when suddenly I got a lot of warnings of viruses Microsoft arise. I immediately disconnected and then ran a full scan of the system of McAfee, but he can't find anything, so I keep the laptop. Now when I try to start it, just at the point where the wallpaper appears (but), I get the following message - "Data Execution Prevention - to help protect your computer, Windows has closed this program - converter of Cookie by Microsoft. The boot process and then stops and goes no further. I then click "close message" (which is the only option), then get a 'Cookie converter has encountered a problem and needs to close... ". "Please tell Microsoft this problem"... window. The laptop remains frozen, regardless if I click 'Send error report' or 'do not send '. My only option then must he put off, which seems to be quite normally, i.e. "Logging Off" followed by "Windows is shutting down".

    I tried booting in safe mode and also "safe mode, last known good configuration", but exactly the same thing happens every time either I can't past the error message above.

    Can anyone suggest what I can try?

    I am running Windows XP SP3 and I am up to date with all Windows updates.

    I agree with Akuma.

    In this case backup your data and use the Toshiba Recovery disk and reinstall Windows. It only takes a few minutes and not so long as trying to correct the problem.
    I think it would be the best solution because the same phenomenon occurs in safe mode and last known good configuration.

  • Satellite Pro L300 will not start until after the update of the BIOS of 1.30 to 1.50

    Dear all,

    I have a Toshiba Satelklite Pro L300 and had no problem for the last 4 years. Last Monday, I replaced my hard drive with a new one and after installing a new copy of Windows XP Pro, I have downloaded all the drivers on the official site. After my last update, I have updated the BIOS to version 1.30 to 1.50. After a few seconds my laptop has rebooted and was not able to load Windows and / or recognize my new hard drive.

    I tried several methods, using safe, optimal Bios default etc but was unsuccessful. IO could not even re - install Windows as the hard drive is not being recognized by the laptop. I've formatted the HD again through my desktop Pc, but still have the same problem.

    I am really worried and would like immediate help!

    Best regards

    Engelbert

    > I formatted the HD again through my desktop Pc, but still have the same problem.
    What happen exactly when you turn on your laptop?

    Set the BIOS as deult and try to install the original recovery image that you got with your laptop. If everything works OK that means upgrading the disk HARD was a success and there is not a serious hardware problem.

    After this check, you can try again to install Windows XP Home edition.
    Please post comments.

  • HP slate 7 does not wake up until after the idle or suspended display.

    I wonder if it is broken. Sometimes when I plug it into the power it will not charge.

    He died instead of sleep when left alone for 30 minutes or more.

    It takes then 45 seconds after pressing the power to start button a restart, complete reboot is necessary whenever he was left alone.

    I did a full factory reset and still it goes dead instead of sleep, requiring a full reboot. Surely it is not supposed to act like that? I can boot Windows on my PC faster that this thing starts up. Makes for a frustrating device.

    I placed a call to HP support, they offered to repair after that diagnosis was material.    I'd been through all the troubleshooting with HP, including 2 reset factory and redefinition by a file on SD card.  They said 10 days to fix my unit... I called HP Shopping and explains the problem and requested a replacement tablet.  They agreed and took the number to call for support, has published a number of RMA # and sent a FEDEX shipping label.  I sent and received for it - 2 days later they shipped a new.  Turn around was about a week of the request of replacement.  It has no suspension problems or to wake up.

    So, I have a very nice work slate 7 now - customer happy.  Do not fight with it too long, get a working one...

    Randy

  • delivers USB ports until after the pc wakes up from sleep

    When I put the pc to sleep its all good, but when I try to wake up the pc to sleep, the mouse stop working, it is power as I see the red light on the mouse, but I can't control it I tried to change the power supply to all three options, I put the USB suspend to disable, I enabled device wake up 'allow' the computer or turn off depending It has been verified or not, and the result is the same: works for the first sleep, but after that, he returned. I check the http://support.microsoft.com/kb/266283 link, which seems almost there, but there is also another device that is affected: the wireless card. What happens to her is it turns on and is active but the router should automatically connect to is not. When I go to 'network' and select the router, the "connect automatically" box is checked, even if it does not connect. the only way to get 2 assistive devices is again to disconnect and then reconnect: the mouse moves and automatic network connects again.

    Thank you

    Hi Aromero,

    I suggest to follow the steps below and check if it helps to solve the problem:

    Method 1

    Reinstall the USB controllers.

    This method addresses the steps where the USB driver currently loaded became unstable or corrupted.

    1. on the desktop, press the Windows key + X , and then select Device Manager.

    2. expand Bus USB controllers. Right click on a device, and then click Uninstall. Repeat for each device.

    When finished, restart your computer. Your USB controllers will automatically install.

    If this does not resolve your issue, go to method 2

    Method 2

    Install the latest drivers for your motherboard chipset.

    This method updates the chipset of your motherboard drivers, so that your computer will use your USB devices.

    1 see the documentation for your computer that will contain the name of the manufacturer of the motherboard.

    2. visit your computer manufacturer's support Web site. For a list of the computer manufacturers support sites, visit: http://windows.microsoft.com/en-US/windows/help/contact-support/computer-manufacturers

    (http://windows.microsoft.com/en-US/windows/help/contact-support/computer-manufacturers)

    Go to their Web site to find the appropriate drivers for your motherboard. For assistance, contact the manufacturer of your computer.

    I hope this helps.

  • defining a guest do not light until after the other?

    is it possible to make a VM box don't turn on not until another, IE. a web server is not on until the database box upward in VMWare?

    I spoke little of HA, but it seems fair to priorities... I'm more curious if in VI, I can tell the web server to wait a few minutes as the database for that box it starts first.

    Only thing you can do is prioritize in HA.

    Start and stop options appear only for EVERY box of ESX, and what happens is they are vmotioned to another machine? Follow them?

    The options will follow if vMotioned

  • Windows does not start after the installation of NVIDIA GeForce FX 5500. Help!

    Before, I had a Sparkle GeForce2 MX400 64 MB AGP Graphics Card with the installed driver. I have not had any problems with him, but I need to upgrade, so I got a NVIDIA Inno3D GeForce FX5500 256 MB 128 bit AGP graphics card. So, the thing is, before I installed the driver for it, the computer was working fine, but of course I can't play games. So I downloaded the driver from NVIDIA (175,19 I think), and I installed it in safe mode to avoid any conflict with my antivirus. The installation is complete, and the system restarted. Everything was going well until after the windows logo (by the way, I'm on Windows XP Pro SP3), when the system crashed all of a sudden. The screen turns off, the unit of the system itself was still on, but it does not. I tried enabling / disabling the NumLock, CapsLock button to check if there is an answer, but I have nothing. I manually turned the computer off, waited for about 3 minutes, the market again, but again, the system crashes after the screen Logo of Windows XP. I started in SafeMode again, uninstalled the NVIDIA driver, restart the system and everything went back to normal. I retried my old 64 MB AGP card and it still works fine. I really need to install the driver to make the most of my 256 MB graphics card. Can anyone help please?
    So far I did the following:
    1. re-installed Windows XP
    2 re-installed the driver NVIDIA about 5 times already.
    3. update all the drivers of my motherboard.
    4. completely removed all traces of NVIDIA using Drive Cleaner and put it back.
    5 installed DirectX 9.0.
    Still, none of them worked. Help!

    Here are my computer specs:
    OS: Windows XP Pro SP3
    Motherboard: ECS 661FX-M rev 1. 0 b
    Processor: Pentium 4 2.4 GHz
    RAM: 768 MB
    HARD drive: 1x80GB IDE slave, 1x20GB IDE Master
    BIOS: Phoenix Tech, LTD 6.00 PG 01/18/2006 v2.2
    Antivirus: Avast free Antivirus v6

    Any help would be appreciated. Thank you! :)

    PS: I know that my computer is really old. But please don't advise me to upgrade the entire computer or something like that. I can't afford to buy right now a new. Thank you.

    Hello

    I suggest to start the computer in safe mode and check if you can start.
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

    If you are able to start the computer in safe mode, then go to Device Manager and uninstall the drivers for the graphics card and restart the computer.

    If it boots fine in normal mode and then try to install the latest drivers in normal mode and check if that helps.

    Check if that helps.

  • Execute "dbms_stats.gather_table_stats in the start = &gt; run until the peak hours = &gt; pause = &gt; restart from where he was arrested after the rush hour" mode.

    Guys,

    Please let know us if it is possible to run dbms_stats.gather_table_stats in "start = > Execute until off-peak hours = > take a break during peak times = > restart from where he was arrested after the rush hour" mode.

    I partitioned table with mammoth number of records requiring full table statistics collection once all 3 months. Stats gathering is so expensive that it takes almost 2 days to complete.  Our goal is to ensure that no SQL that runs during peak hours (15:00 to 22:00 hours) is affected by the collection of statistics. That's why we would like the stats collection to run above mode.

    Ideas, suggestions would be very appreciated and I will receive with the profound esteem.

    -Bugs

    Like others, I wonder why full stats are required.

    You nightly stats together people with reduced mobility?

    Check dba_tab_modifications for the changes made to the table, your stats every night, whether its stats are needed comes from there so if a partition has no 10% change, why you re - collect his stats for her?  There are a few other things going on behind the scenes, but close enough.  Even if you set additional stats there and kick that off, he'll simply choose the following who did not, risking several work trying to do the same thing

    theres probably 10 different ways to act how you're good with plql but generate your work statistics with something like that, then open multiple windows of sqlplus and divide it into sections while you are in the collection of statistics on several pieces at the same time.    Failure could write some autonomous plsql proc that analyzes a partition that went in there and call that any amount of time passing in the partition in a loop, but you get the idea of gathering statistics on more than one partition at the same time.

    Change the value of table_owner and table_name

    exec DBMS_STATS. FLUSH_DATABASE_MONITORING_INFO;

    Select the command from

    (select (nvl(a.updates,0) + nvl(a.inserts,0) + nvl(a.deletes,0)) * 100)

    / nvl(b.num_rows,1) as change.

    "exec DBMS_STATS. GATHER_TABLE_STATS (' |) '''' || "TABLE_OWNER" | '''' || ',' || '''' || 'TABLE_NAME ' | '''' || ', granularity =>' | '''' || 'PARTITION | ''''||  ', PARTNAME =>' | '''' ||  a.PARTITION_NAME | '''' || ', ESTIMATE_PERCENT => DBMS_STATS. AUTO_SAMPLE_SIZE, METHOD_OPT => ' | '''' || 'FOR ALL COLUMNS SIZE AUTO ' | '''' || ')' as a command

    of dba_tab_modifications a, b dba_tab_partitions

    where a.table_name as "TABLE PARTITIONNEE YOUR BIG".

    and a.table_name = b.table_name

    and a.partition_name = b.partition_name

    and nvl(a.updates,0) + nvl(a.inserts,0) + nvl(a.deletes,0) > 0

    )

    where to change > = 10

  • Updated 7 D Firmware and now the manual modes do not work

    I have just updated the firmware on my 7 d to version 2.0.5 and after doing so my manual modes do not have an image. My shutter will open, but does not shut down and does not have the image. My fully automatic mode (green square mode) done. I tried several times to reinstall the firmware without result. I was wondering if there is something I don't understand. If someone could help me I would appreciate that much. Thank you in advance.

    Thank you guys for your replies, but I solved the problem. First of all, I just wanted to say that I have use a Firmware update CF card. Actually, I didn't know it was possible to do it on my computer until last night just after I had copied the file .fir on the map see I wouldn't even when the drive from the computer. For me, it just seems more logical to install from a right CF card in the camera, rather than do it from a PC. But as I told before for some reason, after the update, some of my custom functions have been changed and it was just my 'Mirror Lock' that has been activated. Once I disabled it, it works perfectly now. Although, I did a reset and have to change all my settings back to the way I had them before and recalibrate all my microphone settings for EACH of my lenses (WITH and WITHOUT my 1.4 x and 2 x extensions) using my InFocus programme on my laptop. Declined just to inform you all I fixed it and it was my problem to the case where someone else fell on this. Thank you again for your time and your answers, everyone. It is much appreciated.

  • Sierra crash when after the "sleep mode"

    My MacBook Pro (13-inch, mid 2012) after update of the sierra accident when, after the "sleep mode".

    I try to reset the SMC sama NVRAM but always crash.

    suggest to solve?

    Thank you

    When you say 'crash', what do you mean?

    Probably something that runs in the background. Open the black Apple at the top left. Select system, then users and groups and login items Preferences. All deleted in this window.

    You can add applications and programs back to the points of connection with a window to see what is the origin of the crash.

    You can also start the computer start-up (hold down the SHIFT key when you start) which will make the computer start with no 3rd party apps. If that solves the problems, just disable the third-party applications and add back one by one until the problem occurs again.

  • My 2008 imac has twice in the last month abandoned auto connect and restore needed. After the first restoation, it was Ok but used the manual connection. On conversion automatic return, he went for a week and has not yet. I'm OK, leaving on the manual

    My 2008 iMac interrupted twice by automatic logon. After the restoration of the first time, a month before, it wasOK on a manual connection until I converted to automatic, I restored again and it's OK, apparently, when the manual connection. Can there be an underlying cause that should I worry about the?

    Download and run Etrecheck.  Copy and paste the results in your response. Etrecheck is a diagnostic tool that has been developed by one of the most respected users here (and recommended by Apple Support personnel) of the CSA to provide a snapshot of the system and to help identify the most obvious culprits of software that can adversely affect the performance of Mac.

Maybe you are looking for

  • AT200: Connection problem of speed Internet/Wifi after update 4.0.3

    Hello Given that I've updated my AT200 to 4.0.3 my internet connection speed is incredibly slow.I tested on 2 different wifi where there is the connection with other devices/PCs. AT200 connects easily, but the transfer rate is so low that Speedtest.n

  • Satellite A30: overheating maybe?

    Hello. I had a problem with my satellite SA30-303. When I run certain applications, such as WinDVD Creator and more recently, the online game Lineage 2 and a few others, my pc just stops completely, after an increase of "noise" coming from the ventil

  • When I click on recover files systems from a bygone era, nothing happens

    Original title: System problem of recovering files When I click on the lap, or retrieve an old version of time systems files nothing happens? It was working fine a week ago.

  • power on and off record has changed in my sp3 xp8.

    I have sp3 xp8, professional, I used to be able to turn on the PC and it would go directly to the desktop, but now he have a box with the account name and password required, I don't either, so I click ok and it continues. I like the other connect you

  • Messages to Outlook express does not print

    Suddenly I'm unable to print my e-mail messages in Outlook Express. Only the title is printed. I use Windows XP that is perfectly up to date. I have some Norton software and do not use any other antivirus software.