Manual records on Windows Media Center 7

Similar Questions

• Recording in Windows media center mode 'sleep'

  Original title: record in hibernate or standby mode

  Will be windows media center recording a first HDHomeRun in "sleep" or hibernation mode?

  Hey, Logan,

  Windows Media Center records the first home run HD programs or any which TV tuner installed. However, you may need to follow a few rules.

  -If you turn off your computer, Windows Media Center does not have a regular program. The computer must be turned on or "standby mode" to record a television show. The computer will not automatically in standby mode if Windows Media Center is open.

  
  -Make sure that you turn off the screen and lower or turn off the sound if you have one at the request of a record in the middle of the night and don't want to be disturbed.

  -Your scheduled recording may not save in the following situation: schedule you a recording in Windows Media Center to start in less than ten minutes, close Windows Media Center and put your computer into standby or hibernation mode immediately. Use or one of the following options to save your record programmed:

  a. do not close Windows Media Center before you put your computer on standby or hibernation.
  b. after having programmed a recording, wait a minute before you put the computer in standby or hibernation.

  Here is a link to HP about the same:

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c01896795

  Hope this helps you.

• Can I watch a show that is currently recording in Windows Media Center since the beginning of this show?

  I use Windows Media Center to record TV shows.  Suppose I record a show in an hour at 6:00, and I decide to 06:10 I want to watch this show from the beginning. (while it's recording)

  Is it possible to do this in Windows Media Center?  The media file of the recording of the show is not accessible until it is 100% finished recording.

  I am looking for a way to watch a show while it's recording, but to do so since the beginning of the show (after the start of recording)

  Thank you

  Hello

  Im sure that you can watch TV recordings during live TV recording, but you can't watch a program during its course of recording.

  See also:

  This management recorded TV in Windows Media Center: frequently asked questions

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/Managing-recorded-TV-shows-in-Windows-Media-Center-frequently-asked-questions

• How to change the records of Windows Media Center by car

  Is there a way to change which record TV Player Windows Media Center programs. My C drive is full, but it is the E drive for data that is empty.

  Tasks, settings, TV, recorder storage
   
  Saturday, October 16, 2010, 07:12:07 + 0000, nhsslave wrote:
   
  >
  >
  > Is it possible to change which record TV Player Windows Media Center programs. My C drive is full, but it is the E drive for data that is empty.
   

  Barb Bowman

  http://www.digitalmediaphile.com

• Stop recording in Windows Media Center

  I need to help, stopping at Windows Media Center (Windows Vista Ultimate). For some reason programs took a specific series on once for automatically records. I can't find any option to COMPLETELY stop the records to AVOID it. I don't want to record off tv. I am only able to cut the recorder when there's a notice, that he began to record.

  That sounds like some show was somehow may (inadvertently) value series 'Record '.
  Try this: in recorded TV, go to scheduled > series.  The show in question shows up there?  If so, select it > cancel the series.

  HTH,
  Chris

  MS - MVP (Media Center) [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Failure of a record component - Windows Media Center in Vista Home Premium

  I had problems starting Windows Media Center for about 2 weeks.  The guide does not download, I can't watch TV, sports listings are up to date.  The recorded TV library is emprty even thought there are records.  The message I get is registration Componen failure - some of the files needed to play radio or video are missing or damaged.  Record of components Windows Media Center may have failed.  I used the set up to restore the default values for media center.  I ran sfc/scannow - found errors that could not be fixed, but I do not understand newspapers.
  Thank you

  Hi all

  I suggest that you ask questions of Windows Media Center at thegreenbutton.com/forums.
  They have experts who deal only with WMC and would be better able to help your problem.

  Click here for a link to the post here.

  Hope this will help.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot change the sections of recorded TV, TV was recorded by Windows Media Center on Windows 7

  I have problems with sections of editing a stored program recorded TV in Windows Media Center on Windows 7.

  I can't find all the options to change the records as it is on my PVR on Media Center. I can't even open the record with another program like Nero to edit & find Windows Live Movie Maker is very limited, it allows to cut the ends of the records not the sections in the middle.

  Can someone tell me what program or how do I do it (& where to find)?

  Media Center has not all means of editing recorded TV. I don't know if you
  will have more luck if you convert DVR - MS and then try Nero. To convert,
  view the TV folder in Windows Explorer and click with the right button on the show.
  then convert DVR - MS to view on the shortcut menu.  Video reDo might work
  as well. Try posting on thegreenbutton.com forums if this does not resolve your
  issue. See the son as http://thegreenbutton.com/forums/p/85953/432209.aspx
   
   
   
  Sunday, July 4, 2010, 05:29:20 + 0000, Lunny says:
   
  >
  >
  > I have problems with sections of editing a stored program recorded TV in Windows Media Center on Windows 7.
  >
  > I can't find any options to modify the records as it is on my PVR on Media Center. I can't even open the record with another program like Nero to edit & find Windows Live Movie Maker is very limited, it allows to cut the ends of the records not the sections in the middle.
  >
  > Can someone tell me what program or how do I do it (& where to find)?
   

  Barb Bowman

  http://www.digitalmediaphile.com

• Error code to recording in Windows Media Center

  Hello

  I have problem with an error code ladle in MCE, 0xc0040524, it happens randomly.

  Installation program:

  (Custom) HTPC with Windows 8.1 with MCE

  Card tuner DTV Floppy (internal connected to the Firewire interface) with the last driver BDA.

  I ran this with Windows 7 for about 4 years, without this problem.

  It started after the upgrade to Windows 8.1.

  What can be the reason for the error, SW or HW code and how to follow the deeper level?

  BR

  Hello

  As we have not anywhere with this issue, I made a change to the configuration of the SW.

  I replaced the BDA Tuner FireDTV for MCE driver with the general BDA driver.

  I then installed the DVBLink TV-Server as an interface for MCE.

  The installer worked without any problems so far (almost 2 weeks).

  It seems to be the pragmatic solution to this problem.

  Then we can close this case.

  BR

• How can I burn only the first 2 hours of a 4 hour program in Windows Media Center?

  The Today show is listed as 4 hours in the Guide.  I want to only record from 07:00 to 09:00 and not paws full of 07:00 to 11:00.  Is there a way to save only the first 2 hours?

  see if
  http://www.digitalgeekery.com/175/how-to-create-a-manual-recording-in-Windows-Media-Center-for-Windows-7/
  helps you.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• During the registrationof windows media Center recording error

  I just reinstalled Windows XP pro on my laptop using the support disc that comes with it.  Formatted the C drive and installed.  At half way through a message "errors of recording when recording in Windows Media Center." For more information, see - windows/medctroc.log.

  After accepting this installation on board after starting a box came up with "Starting windows first time.»  Please wait. "Nothing happened and I ended up re start it manually.

  Another view "configure."  Windows Update - dot.net .net service pack 1.1 - dot - restart

  Yet once I had to reboot manually.

  error came: sl1a.tmp common language runtime debugging services application has generated an exception that could not be treated have id = 0x4e0 (1248), thread id = 0x4fo (1264)

  When widows finally came message read - system will restart - not found ngen.exe entry - point and then - get asked the version of the runtime could not be found in the dynamic binding.

  I open IE and try to get updates and a message says "the requested lookup key was not found any active activation context.»

  I managed to install Opera, but that is not enough with Microsoft update.  Could someone please help?

  This looks like one of three things is unhealthy

  (1) your installation disc

  (2) your RAM

  (3) your hard drive,

  You must test each and then determine if its more cost effective to replace the unit or machine.

  (1) test the drive in another machine with IsoBuster - an analysis of surface and find if everything is OK if there are some errors present

  (2) tΘlΘcharger a RAM www.memtest.org - run at least 8 passes Tester and see if errors appear

  (3) download the utility from control of the manufacturer of the HD and create the bootable CD - do a quick scan and then the long scan of the hard drive and see what it reports.

• Windows Media Center - No Audio on Live TV or recorded TV

  I have days searched through various forums and tried all suggested and no still no resolution.

  I have no sound when using TV or TV recorded in Windows Media Center in Vista Home Premium.  I checked all volume mixers, nothing is cut.  I reinstalled WinTV drivers and the latest audio drivers for my laptop.  Another post suggested to install a codec package, but the link provided is for Windows XP.  I searched a lot of Vista with no result.

  All other programs work perfectly.  It's very annoying.  Someone at - it suggestions?

  Hi Parvati,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  This can happen if the speaker settings are not configured correctly

  1. go in sounds in the control panel.

  2. click on speakers and select the Advanced tab.

  3. configure the settings of speakers correctly by turning off the computer take exclusive control of this device 'allow' in speaker properties

  To work around this problem and restore audio, follow these steps:

  1. press the Play button on the Windows Media Center remote control or on the multimedia keyboard.

  2. use the mouse to click on the Play button at the bottom of the video screen.

  3. press the Pause button and press the Play button on the Windows Media Center remote control or on the multimedia keyboard.

  4 resize the Windows Media Center window from mode full-screen mode to windowed mode or windowed mode full screen.

  When you use Media Center to watch live TV on a Windows Vista-based computer, you can't always hear the sound

  http://support.Microsoft.com/kb/929515

  When you use Windows Media Center to play live TV or a DVD on a Windows Vista-based computer, you do not hear sound after you wake the computer from sleep mode

  http://support.Microsoft.com/kb/942364

  Let us know how it works.

  Kind regards
  Support of yama - Microsoft.

  Visit our Forum of Microsoft answers Feedback and let us know what you think.

• Add the network location in Windows Media Center for recorded TV

  Locations of tv settings, tv, recorder, more Windows Media Center does not outside of the local computer.  I used Media Center to record some TV shows and I want to spend my laptop on USB large network of an old desk for viewing later.   Because I can't point to this place I'm stuck.
  The files are on USB key and visible in windows media player and video location in Windows Media Center.  In other words, none of the news of the series is visible in Windows Media Center (but is in windows media player), so I can't continue to record series because Windows Media Center is not aware of the episodes already on USB network.

  Hello Johngi2,
  Thank you for your message.  To change the location of your recorded TV shows and always keep the info so that you won't get duplicates please browse to the following location in Media Center.
  Settings > TV > TV recordings > TV storage > storage location
  You just change the location of storage on your USB.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Center does not record the calendar.

  Planning to record a program, but sometimes lapsed time up to the point where it does not record. I am running Windows 7 Home. Yes, I checked preferences but which differs only up to 15 minutes max.  I have reinstalled twice already. Why please?

  Hello

  (1) did you make any changes before the show?

  (2) what is the brand and model of the computer?

  Windows Media Center records the first home run HD programs or any which TV tuner installed. However, you may need to follow a few rules.

  -If you turn off your computer, Windows Media Center does not have a regular program. The computer must be turned on or "standby mode" to record a television show. The computer will not automatically in standby mode if Windows Media Center is open.

  
  -Make sure that you turn off the screen and lower or turn off the sound if you have one at the request of a record in the middle of the night and don't want to be disturbed.

  -Your scheduled recording may not save in the following situation: schedule you a recording in Windows Media Center to start in less than ten minutes, close Windows Media Center and put your computer into standby or hibernation mode immediately. Use or one of the following options to save your record programmed:

  a. do not close Windows Media Center before you put your computer on standby or hibernation.
  b. after having programmed a recording, wait a minute before you put the computer in standby or hibernation.

  I would have you refer to the article below:

  Why my TV did not show record in Windows Media Center?

  http://Windows.Microsoft.com/en-in/Windows7/why-didn

  Please let us know if that helps.

• Cannot play movies/recorded shows in Windows Media Center on Windows 7

  Three years ago I bought a Sony laptop with Vista and an external tuner ATI so that with a CableCARD, I could use Windows Media Center to record shows/movies. I recently bought a new PC with Windows 7 and found that the Windows 7 PC cannot read the 500 films/shows that have been saved and the new Windows 7 recorded shows can be played by the Vista laptop. Is any way to convert or run natively these shows that have been saved under the WMC?

  Ralph Greenlee

  E-mail address is removed from the privacy *.

  Hi RalphGreenlee,

  Thanks for posting your query in Microsoft Community.

  If I understand correctly, you are unable to play back movies recorded in windows media center.

  Looks like the file cannot not supported by Media Center or you need a codec to right.
  What type of video file format?
  Also check the videos if there are other formats to the choice other than the one you have now.

  Method 1:
  Step 1:
  Indicate the file types supported by Windows Media Center:
  Types of files supported by Windows Media Center:
  http://Windows.Microsoft.com/en-us/Windows7/file-types-supported-by-Windows-Media-Center
  Step 2:
  Try using a good set of codecs and then try to burn video files.
  Codecs: Frequently asked questions:
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  WARNING: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  See also:

  See pictures and videos in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows7/view-pictures-and-videos-in-Windows-Media-Center

  Add media files to Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows7/add-media-files-to-Windows-Media-Center

  This management recorded TV in Windows Media Center: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Managing-recorded-TV-shows-in-Windows-Media-Center-frequently-asked-questions

  Please follow these recommended steps, review the additional information provided and after back if you still experience the issue. I will be happy to provide you with additional options available that you can use to get this resolved.

• How to download a video from youtube on windows media center?

  I recorded a gameplay on my computer and it was recorded in Windows media center, how can I upload it to youtube?

  I recorded a gameplay on my computer and it was recorded in Windows media center, how can I upload it to youtube?

  ===========================================
  Your video file is not 'in' media library... it will be saved in
  a folder on your hard disk drive... probably your folder my videos.

  See the following articles:

  How to download YouTube videos
  http://Lifehacker.com/5804501/how-to-upload-videos-to-YouTube-for-beginners

  How to put Windows Movie Maker video on YouTube?
  http://www.techburgh.com/2009/05/10/how-to-put-Windows-Movie-Maker-video-to-YouTube/