manually clean the printheads for deskjet 3050 has

Similar Questions

• Does anyone know how to clean the printheads for epson SX100?

  I got an Epson SX100 which was resisted for some time, while the ink cartridges are a bit dry.  There are still a lot of ink but I want to clean the print heads or nozzles, but I can't make it work.

  I got an Epson SX100 which was resisted for some time, while the ink cartridges are a bit dry.  There are still a lot of ink but I want to clean the print heads or nozzles, but I can't make it work.

  Answering your question: Epson could.  Tried to contact the manufacturer of the product in question rather than the manufacturer of the operating system (one of many) you could connect this printer?  :-)

• DeskJet 3520: How to replace the printhead for Deskjet 3520

  After 5400 pages, I got the 0xc19a0042 error on my printer. I changed the ink without best result. But when I opened the printer and cartridge and printerhead support touch, I often can print a few prints before the error will appear again. It cannot be a permanent error. Anyone know what could be the problem?

  I bought a new HP printhead, but can´t find instructions on HPs or internet pages. Should I unscrew the upper part?

  I hope that someone has had the same problem and can help me with some advice.

  Thanks for all tips. I have now resolved the issue. As I said before, I bought a HP printhead on ebay. I opened the printer and with the exception of the stop of the cover that was no problem. For deassamble the lid Cap I had to pop out with a screwdriver. I pulled the power and LCD. Then, it was easy to lift off the cover and the scanner and change the print head with all the electronics. I cleaned up all the old ink of the word of the printer and it was a lot of ink. After putting together again it worked again.

• DeskJet 3050 has J611 all-in-one: Mac cannot connect to the printer using the wireless configuration

  My printer is connected to the same network as my Mac. When you complete the Setup wireless using a USB in system (HP Utility) preferences, a message says: "wireless network settings have been successfully downloaded to your device. However your Mac could not locate the device on the network. »

  I did everything I could: restart the printer. Unplug the printer and reconnected on the network and configuration of try again several times.

  Help?

  Hey @benjaminllim,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the connection of your Deskjet 3050 has e-all-in-one printer to your computer Mac OSX 10.11. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Turn the printer off:
  2. While the printer is turned off, disconnect the power cable from the back of the router for a minute.
  3. When the lights come back on the router, turn on the printer.
  4. Disable any antivirus, firewall or security of your Mac software.
  5. Try to run the installer.

  Please let me know the results after following the above. If you are able to print to the printer, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP deskjet 3050 a: hp deskjet 3050 has 0xb04021a6 error codes

  At the error code 0xb04021a6 on the screen of the printer at the time wherever you turn it on.

  Have research all day but unable to know what means this error code.

  Hi @e-year-e.

  Thanks for joining the Forums of HP Support for a solution to your printer problem.

  I understand that you have a HP Deskjet 3050 has e-all-in-one printer showing an error code "0xb04021a6" when he is running. I would like to help.

  These error codes are caused by hardware or firmware issues.

  "Here is the document of suppiort designed to be used with this problem - ' 0xc19a0005" or similar error.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• DeskJet 3050 a: hp deskjet 3050 has not not red print

  I recently replaced both my cartridges on my Deskjet 3050 has. He had already printed perfectly for the past 2 years.  I checked that they are correct cartridges of real HP purchased from HP.

  I'm on Macbook Pro with OS X Yosemite 10.10.5 version and wireless connection.

  Please can anyone help because it's so frustrating?

  Thanks in advance.

  Martin

  Hi Martin,

  Try to print a self-test report by selecting settings > reports > Self Test.

  You see the magenta color printed correctly by the equipment?

• Why no driver Deskjet 3050 has 7 can I?

  I'm trying to set up my HP 3050 has on my HP laptop running Win 7.  I assumed that a driver would be available in

  Win 7.   There is no HP Deskjet 3050 has no appropriate driver available.  My disks went in a fire.  What should I do? Thank you for your suggestions.

  Hello

  Have you checked the site?

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=5061058&TaskID=135&prodTypeId=18972&prodSeriesId=4311836

  I hope this helps.

• I have to manually install the driver for Aspire ZC-102, updates when I move Windows 8 to 10?

  I have to manually install the driver for Aspire ZC-102, updates when I move Windows 8 to 10?

  I was struggling with this ACER for more than a year. I have do it I have back when it was still under warranty, 14 months ago. Now I've updated free online through Microsoft for Windows 10 back in early August. I had hoped that my mess was a stack of the operating system, but unfortunately, it's still a piece. However, there is no virus. I run Malwarebytes Pro full time with it has quarantined of PUPPIES as well as McAfee Anti Virus full time. I use cCleaner to keep cut up. I NEVER garguillo or browsed porn.
  I've got max 16 GB of RAM. I have very few applications other than Office 2013.

  Even if this thing was a room at the time where it was running Windows 8 and 8.1, so I want to try to make it work on Windows 10 without having to start over with a clean install. That's why I asked about the drivers.

  your ZC-102 will not have a direct drivers updated from Acer support, which means you have to rely on Windows Update by itself the drivers or get them by yourself.

  Let me give you 3 Tips:

  1) never use Registry cleaners Windows 8.x and above all, they are no longer needed

  (2) uninstall McAfee, he kills the performance of your machine, use the antivirus windows integrated, it is good and very light

  (3) If you require loading time fast on programs, think about an SSD upgrade

• DeskJet 3050 has

  I have a Macbook Pro that I've recently upgraded the operating system of Yosemite (10.10) and have a new Xfinity wireless modem. I can't print using my Deskjet 3050 has.  I must need a new driver. Is there an and where and how can I get it?  Thanks for any info.   Anst

  Hi @anst

  Although there is no full feature software and drivers for your printer that is compatible with 10.10, you can still print and scan to your printer using this operating system.  Please take a look at the following document; Installation of the OS X v10.10 Yosemite of Apple Software Update HP print driver.

  If you continue to have trouble printing or scanning, please let me know and describe the problem in detail, thank you.

• HP Deskjet 3050 has All - in - One J610 series is not compatible with mac os x 10.8 mountain lion. need help.

  Hi I have a HP Deskjet 3050 all-in-One J610 Series a as indicated in the title, and I have the operating system Mac OS x 10.8 Mountain Lion. I need help to get or install the software hp for printing wireless setup in my dorm. Any help is very appreciated.

  Hello

  I'm not not clear with your exact printer model, it is the printer Deskjet 3050 a (J611) or model 3050 (J610) ?

  For the Deskjet 3050 J610- a complete software not available at this time.

  As there is no comprehensive software available for Mountain Lion, you will need to set up a temporary ad hoc connection and then use the EWS printer to connect the printer to your router.

  • Press the button on the control panel wireless to display the options menu on the screen of the printer wireless.
  • Select on the screen of the printer's wireless settings, then Netowrk default settings.
  • Under the same wireless and select Radio wireless and make sure to put it on.
  • From your Mac, click the WiFi icon and then click on join another network.
  • Click view networks, select the printer SSID, it will include 3050 or J610 in its name, then click on join.
  • Allow 2-3 minutes to establish the connection.
  • Open Safari and click on the favorite icon ().
  • Hello-click and then click on the name of the printer, the EWS page appears.
  • Enter the network tab.
  • Less wireless (802.11) click Wireless Setup Wizard and then click Start the wizard and follow the steps on the screen to configure the wireless connection.
    Note: If you must provide the type of security for your wireless network, you can click the WiFi icon, click Network Preferences and select the Wi - Fi network. Click Advanced, and you will find the type of security for your network in the Wi - Fi tab.
  • Once the wizard of wireless via the integrated Web server configuration is complete, click the Wi - Fi of your Mac and you connect to your router again.

  Finally, go to System Preferences > print & Scan and add the printer. confirm all calls to get the drivers from Apple servers

  For the Deskjet 3050 has (J611), be sure to connect the printer with a USB port and follow the installation below:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-107372-1&cc=us&DLC=en&LC=en&OS=219&product=5061082&sw_lang=

  Please let me know of any problems,

  Shlomi

• Cannot get deskjet 3050 has in a j611 series print

  my printer does not print

  Hello

  Thanks for posting the question on Microsoft community forums. Looks like you can not print using HP Deskjet 3050 has.  Please answer a few questions to refine the question.

  1. do you get an error message?

  2. are you aware of changes to the computer before the show?

  3. what happens when you try to print?

  I suggest you perform the steps described in the article:

  Solve printer problems
  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps. Please reply with the status so that we can help you.

• Why can not install HP DESKJET 3050 has in a series of J611 on my new computor windows 8

  What can I do to make my existing HP DESKJET 3050 has all in one printer to work on my new computer windows J611 series 8 when I put in the disk says it is not compatible in some way?

  Get the updated drivers from HP for Win8:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109013-2&cc=us&DLC=en&LC=en&OS=4132&product=5298986&sw_lang=>

  As with all HP printers, the software must be installed before connecting the printer. Installation will then ask you to connect via USB. If you have installed all previous versions, uninstall them first.

  I have this same AIO, and new long pilots work fine.

  SC Tom

• Example: HP Deskjet 3050 has J11n: my printer Hp3050n used to scan to my applemac

  Until recently my HPDeskjet 3050 has scanned on my mac automatically j11n. It will not now and message scanner is not found. I am completely ignorant about computers. Help, please! Thanks.I could have disabled and now don't know how to connect.

  Hi @Valerie35,

  Welcome to the Forums of HP Support! I see that you are running into some problems of printing and scanning to your HP Deskjet 3050 has, when you try to scan, you get an error message 'not found computer '.

  If you have recently lost the connection between the printer and your network wireless, you have to reconnect using the USB key to the wireless configuration.

  Please go ahead and start troubleshooting here: printer does not maintain the wireless connection

  I hope this helps, let me know the result!

  Thank you

• How to replace ink cartridges hp deskjets 3050 has

  need to replace printers inkjet on hp deskjet 3050

  (new forum HP)

  Welcome to the forum, Griff.

  Your printer has its own website pages - in the section "Troubleshooting > How To ', come the instructions to change the cartridges:

  HP Deskjet 3050 has e-All-in-One Printer - cartridges

  The document includes a video to explain the procedure.

• How to manually change the ports for HTTP on the server vCenter Server

  Hello Experts,

  We have Windows Server 2008 SP2 machine where we v5.1 installed with other SSO components, inventory services, vCenter Server and Update Manager.

  So we went from SSO, the inventory services and vCenter Server fine however, vCenter Server has stopped working. While we were to modernize SSO, the service could not start after the upgrade and the recd suite error "Service VMware KDC service could start.". So, we found the article on the VMware site that said port 88 to cause the problem. To find out more by using the netstat command, we found vpxd.exe used port 88. That is why, we stopped this service and proceeded to the upgrade of the SSO. The upgrade is complete following the inventory service and vCenter Server. While we were upgrading vCenter Server, we found that port 88 was used for HTTP communication.

  So we wasted on the use of the port. The upgrade has been completed successfully, however, we can not connect to vCenter server using vSphere Client version 5.1 or 5.5. We even tried to start the VMware VirtualCenter server using the services.msc console and it failed.

  So we assume the port changes happened during upgrade of the SSO meets the HTTP port by vCenter server usage. We need help on how to manually change the ports for HTTP on the vCenter server.

  Suggestions forward. This problem is with the production servers.

  Thank you

  Karan

  This has been resolved... port has been changed manually and works very well.