Manually enter the WPA key in Bravia, TV freezes

Hey there,

I'm trying to set up my TV (model KDL-46NX720) with my wireless network. This should be pretty easy... Problem is: I don't have the remote. All directions, I found were using the remote control...

I tried to maneuver on mine it and enter it manually, using the buttons for volume/channel/enter/House on the side of the TV. In fact, I was quite successful and was able to select the right wireless network. However, I came across a problem as soon as I got to the screen that asks for the WPA key. It came with the scroll slowly flashing in the text box, while the 'k' has been selected below. It showed my old password wireless in the text box and absolutely not allow me to delete or edit - or even move the selection of the 'k '.

I tried to press the 'enter' all by pushing the channel up and down buttons. I tried to do the same using the 'home' button He would not even make something when I pressed the button "home" only - wouldn't take back me to another screen or the main menu... Nada. The ONLY THING that seemed to allow me to do was to change the volume. Whereas before the volume keys hands left-right scrolling capabilities, they suddenly changed the function to regain control on the volume actually...

Any ideas on what is happening here? I want to just set up the wireless to connect my iPhone and use it as a remote control (as I did in the past - yes I went through this before, but never experienced frozen screen password!)... and maybe just maybe finally get to see Netflix!

Really shouldn't be so hard... but alas.

Thanks for all the ideas and input.

Hi phlyinphish9,

You need a remote control to enter the WPA key, but a work around you can try is to have the TV connected via a wired facility first, and then have your iPhone enter the WPA key through the wireless setup. Or if you have a set-top box remote, try to check if it can manage to the TV.

If my post answered your question, please mark it as "accept as a Solution.

Tags: Sony TV

Similar Questions

  • Satellite L670 - 1 DL-after to enter the network key, it fails to connect

    I have a nine L670 and want to connect to my WIFI at home (Fritzbox) access point.
    Realtek RTL8191SE WLAN card can see the WLAN, but as I enter the security network key it fails and does not connect to the WLAN. I have an older laptop in parallel to check that the WLAN router is working and that the PC connects to the router.
    I use WPA - PSK / 802.11 g.
    Realtek version is 2015.1.427.2010.

    Help, please!

    Christian

    Hey,.

    Are you sure you entered the correct key of WLAN security? Maybe you typed wrong then you should check it again.

    Otherwise, you can try to update the WLAN driver. New driver WLAN, you can download from the Toshiba WLAN Portal:
    http://APS2.toshiba-tro.de/WLAN

  • Do not remember the WPA key. Other computers on the network

    I don't remember my WPA key and reset isn't exactly an option since I have other computers already configured for the existing key. I don't mind reset other computers as well if I knew for sure that it works. However, there is a discrepancy between the length of the WPA key on my Linksys (indicated as asterisks-33) and the length of the WPA key shown on the laptop of my wife (indicated as asterisks-63).

    I am trying to add a Wii to my network. Our router is currently not broadcasting the SSID, but I typed the name of the router in the Wii in any case. (She even will be able to find a network that is not broadcasting its SSID?).

    I also added the Wii MAC address to the list of trusted computers.

    Regarding the password, I considered to change but I'm worried I might spoil my wife configuration.

    When I go into my wireless settings, I see that I use a WPA TKIP encryption which is 33 characters long. However, when I go into the configuration of the network on my wife's computer, she says that his encryption key is 63 characters (WPA - PSK TKIP). Why the keys of different length?

    Is it possible to change the encryption key on the router to something I'd remember? If so, that will enter my wife's computer? Wouldn't make sense that what I typed in the settings wireless of Linksys (33 characters) would be the same as mine rather than 63 characters?

    I'm so confused.

    Any help?

    First, the County of asterisk is meaningless.  Even the number of characters in your password is a secret, so all good programmer who wrote your wireless network card driver shouldn't have a number of astrerisk which corresponds to your password.

    Set your "broadcast SSID" "enabled."  Do you really think someone will lose hundreds (or thousands) of hours of time to break your password, just enter a router WPA?  As long as you use WPA or WPA2 and a password, you shouldn't worry about your SSID broadcast.

    You can use any key (sometimes called password or password) you want, but all the keys (in router and all computers) will be the same.  Ideally you should use a strong password.

    Choose passwords (keys): you should never use a Word from the dictionary as a password. If you use a Word from the dictionary as a password, or WPA2 can be cracked in a few minutes. When you take your login password and key encryption (password or password), you must use a random combination of uppercase letters, lowercase letters and numbers letters, but no spaces. A connection password, must be 12 characters or more. WPA and WPA2 passwords must be less than 24 characters. Note: Your key, password or password should not be a space in it.

    Most individuals should have their routers defined so that "remote management" of the router is disabled. If you must have this option enabled, then your password needs to be increased to a minimum of 24 random characters.

    An additional problem is that Windows XP requires SP3 run WPA2 (WPA with AES =).

  • I entered the product key: / * removed product key * / for window 7 but it shows oxc004e003 error code

    I entered the product key: / * removed product key * / for window 7 but it displays oxc004e003 error code how can I fix this problem and it is easier to install

    Activation error: 0XC004E003 http://support.microsoft.com/kb/938450

    Have you tried to restart by phone?

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

    Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
    http://go.Microsoft.com/fwlink/?LinkId=52012

  • TB 31.5.0 Win 7 after the TAB key for the automatic update no longer creates new address line "write" (enter the done key) but I want the TAB key! Why this keep happening after

    TB 31.5.0 Win 7 after the TAB key for the automatic update no longer creates new address line "write" (enter the done key) but I want the TAB key! Why is - this seems to happen after each automatic update? Cant we get 'option' to use the TAB key to navigate through the lines of address "write"?

    TAB through the fields that exist. It is the function of the TAB.

    Otherwise you could never use TAB to go out in a field for example: subject. It would create an indefinate number of fields and are unable to function as a TAB key.

    TAB does not back to THE fields,
    New crests to THE fields or donkey typing/selection enter/return address, you can use the selection of mouse click.

  • Printer all in one HP3520 - how to select the wireless network and enter the WEP key?

    According to print my wireless network is detected.

    How to connect the! @# % printer $ fo the wireless network and enter the WEP key?

    Instructions on the HP site tell me to selet NETWORK on the printer control panel.  Well, there's a way to select the NETWORK from the control panel.  It is not an option for him.

    I downnloaded and installed the latest drivers.

    I have restored the default settings.

    How to select the wireless network and enter the WEP key?

    All of HP's instructions seem to be for a newer printer with a touchscreen.

    I want that the printer is connected to my main computer via the USB port.  I want to be able to print wireless phones and tablets.

    My 3520 is not a 'touch Screen' and it has wifi.

    However, the following work:

    Try to open the HP Deskjet 3520 icon, open the utilities tab, click on convert USB wireless, by following the steps on the screen.

    This leads me to believe that ONLY the wireless doesn't work.  I know now that the part of the sentence "Convert USB to wireless connection" is supposed to mean "works like USB and wireless.

    Thank you for your help

  • mx459 won't let me enter the WEP key number, allows only symbols and letters. How to enter numbers?

    mx459 won't let me enter the WEP key number, allows only symbols or letters. How to enter numbers?

    John

    This might help

    Press the SETUP button on the control panel of your printer.
    Using the arrows, select DEVICE SETTINGS, press OK.
    Select local network SETTINGS, then press OK.
    Select Configuration LAN wireless, and then press OK.
    If a message appears, press the WPS button, press STOP to cancel.
    Select STANDARD INSTALLATION in the next screen that appears, and then press OK.
    Select your access point or router, and then press OK.
    Press OK to confirm the access point name.
    Enter your password using the numeric keypad on the right.
    On the screen where you enter your password at the top right of the LCD screen, you should see a: 1. This indicates you are in digital input mode. If you press the asterisk (*) will be fixed: has or uppercase mode, pressing asterisk with tiny switch. To enter a letter in letter mode, you press the digital key to scroll through the available letters. For example: to enter a letter 'c', you press the '2' three times.
    Press OK when finished.
    The LCD will say "Connected", if the password is correct.

  • During the installation of Windows XP, I enter the key and send a message: you have entered the CD key is not valid.

    Invalid CD key?

    Im trying to install windows xp on my old laptop from samsung before I sell, I have a copy genuine windows xp home edition (bought a few years ago), but when I get to the point to enter the product key, it says ' you entered the CD key is not valid! The key is the rear of the product then why it does not work and what I do?

     

    I thank you for all the help guys, don't really know if that it settled, but I read that if the time of bios is bad it can perform, I changed that and very well installation (so far!)

    Thank you
  • Install window xp media Center 2005 you entered the CD key is not valid

    Hello
    I have an Advent 8111 laptop and I am trying to format the hard drive and reinstall Windows XP Media Center Edition 2005. I have a copy of the Widows XP MCE 2005 to my IT Department at my workplace as they said that they could download and burn for me quickly!
    but after formatting the hard drive and the partion on my laptop I have to type my product key, which I got from the bottom of the laptop. The error window pops up saying "you entered the CD key is not valid" and I don't see any other option to have passed this stage. I contacted ADVENT but they were not able to help. What should I do next?

    Where did you downloaded it go?  Are they legal?

  • Trying to enter the product key

    I entered the product key correctly but when I hit the enter button its not available so I can't do anything. What can I do? It's not even say whether its wrong or not the option to continue or enter is not available when I get in there.

    Hello Nicole Hollins.

    The product key on the bottom of the computer is for the operating system of the computer not for an Office product.
    Some computers come preinstalled with a trial version of Office that is usually 60 to 90 days. However, if you wish to continue using
    an Office product, you need to buy Office 2007 from a store online or in a retail store. to get the product key code. It will be on the box or the CD cover.

    To buy online, you can click here for a link to the Microsoft Store: http://store.microsoft.com/microsoft/Office-Compare-Office-2010-Suites/category/213
    They will e-mail your product key.

    I hope this helps.

    Sincerely,

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Where can I enter the product key for Vista upgrade to Windows 7 Professional?

    I bought Windows 7 Professional PIN from Best Buy. I was told that I could move from Vista by going nd online during extraction of the key using the PIN code.  I got the key and follow the instructions. After clicking on upgrade of Windows antime a box does not seem to enter the product key

    You cannot use the Express upgrade from Vista to WIndows 7 - you must use a full upgrade disk.

  • Have tried to enter the product key from the back of my pc, I get a message that is not valid.

    I get a message to activate Windows, but when I enter the product key from the back of the pc, told me that it is not valid. I've used Windows every day. that's some update? (I'm running Vista). I have done a few months ago after repairing the pc, but the number has worked well. I have the installation disc of Windows that came with the computer, but did not know if the "repair my computer" would do the trick. Anyone have this problem?

    Hello

    ·         Where there any material changes done on the computer when it was repaired?

    ·         What is the brand and model of the computer?

    First of all, I suggest you to contact your computer manufacturer and check the valid activation key. Follow these methods and check if that helps.

    Method 1:

    I suggest you to refer to this article and check if it helps:

    Resolve activation problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-activation-problems

    Method 2:

     

    If Windows detects that the hardware on your computer has changed significantly and the previous method does not resolve your problem, you may need to contact Microsoft for help. To see the list of phone numbers Microsoft Activation Centers worldwide, visit the Microsoft Web site at the following address:

    http://go.Microsoft.com/fwlink/?LinkId=71142

    See also:

    Error message when you start Windows Vista: "your activation period has expired".

    http://support.Microsoft.com/kb/925616

  • I have Windows Vista Ultimate, I've upgraded to SP2 downstairs right it is said that this copy of windows is not genuine. It would allow me to enter the product key provided with Windows Vista Edition full

    He wouldn't let me enter the product key provided in the box of Windows Vista Edition full Microsoft. ? How can I rectify this?

    Microsoft Genuine Advantage, frequently asked questions (FAQ)

    For a list of frequently asked questions (FAQ):
    http://Windows.Microsoft.com/en-AU/Windows/help/genuine/FAQ

    How to submit a technical support request
    http://Windows.Microsoft.com/en-us/Windows/help/genuine/submit-request

  • How do I pair the mobile phone LG rumor 2 for Vista laptop, or how to manually enter the pairing code

    Hello.

    When I try to pair my phone to my laptop, it appears in the add menu.  When I click on it, a window will appear that has a code on it and told me to check the code on the device is the same.  No code appears on my phone.

    How can I manually enter the code?  In my opinion, I know, but no option appears to allow me to enter.

    I tried all the step using the dialog boxes.

    Thank you!

    Hello

    Please use the Windows Vista answers Forum.

    The Bluetooth device you want to pair must be in mode so that it shows the pairing pairing code.

    Consult the owner's manual for the device you want to use to find detailed instructions on how to place the unit in pairing mode.

    1. with the handset closed, press the button on the keyboard to access the main menu. Once inside the menu screen, select the menu "Tools".

    2 on the Tools menu, select the Bluetooth menu and press OK on the possibility of "pair with hands-free."

    3. the handset will start searching for the Bluetooth device. Once found, it will fill in the list of devices. Press OK on the keypad to associate the device.

    4. once the device PIN / access code has been entered (as applicable), the pairing process will be completed. Leave the menu screens and you will be able to start using your Bluetooth device.

    NOTE: A command prompt can display request a PIN of 4-16 (usually 0 0 0 0). If this prompt is displayed, see the owner's manual for the device for use with the handset to determine the AXIS / Pass code

    You can check the link below:

    http://lgknowledgebase.com/kb/index.php?view=entry&EntryID=6264

    Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

    Kind regards
    Technical support of Microsoft-yama.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • entered the product key for windows vista... it says inncorrect? but his right... don't know what to do?

    model of the obtained last year and still havnt entered the product key for the whole upward, but did not enter until today... number is on the sticker on the back of the computer so definitely correct... but it repeat its wrong... What do I do? all ideas

    model of the obtained last year and still havnt entered the product key for the whole upward, but did not enter until today... number is on the sticker on the back of the computer so definitely correct... but it repeat its wrong... What do I do? all ideas

    Hey msleilei

    If you try to set up the office you have installed as office does not come for free a trial version

    the product key on the matter is for the stayem operation not all office applications

    you would have to buy office

    read the versions and prices to the below microsoft store the link to give you an idea

    http://store.Microsoft.com/Microsoft/Office/category/2

    Alternatively, you can try the game for free office open office applications

    read the information on the link below

    http://www.OpenOffice.org/

    If you are referring to what the operating system activation problems read the information on the links below

    http://support.Microsoft.com/kb/940315

    http://social.answers.Microsoft.com/forums/en-us/VistaInstall/thread/2c1a6000-CACA-4F88-9cb3-4aacf19d8cfe

    Walter, the time zone traveller

Maybe you are looking for

  • For UPEK fingerprint authentication software

    Where can I obtasin the latest version of the software for UPEK fingerprint authentication

  • Problems in the strange display on my Satellite A205 driver

    My laptop came with 2 GB RAM and Geforce Go 7300 with a total memory of 399 MB. I bought this laptop about 4 months ago and had no problem with it until 2-3 weeks ago. I play World of Warcraft online game, and I know that this game requires no high p

  • W530 Intel SSD update?

    I was curious to know if the current edition of 180 GB Intel 520 a firmwear the updated? Mine seems to be lagging behind increadbily and producing errors on the new operating system windows 8 PRO.

  • will I get updates

    Hello I unlocked my bootloader to my E BIKE (XT1022) India. will I get the latest updates OTA for my phone, and his is just unlocked the bootloader and it is not rooted and did not use other custom ROM. Please help me >

  • plugin information under Linux

    Hello I'm looking for information plug-in for LabVIEW in Linux as we receive an error "Element is not supported, the plugin for the selected item is not installed on your system or the plug-in has expired license". The thing is that we might be able